I have installed nfs-kernel-server on the server and nfs-common on the client. Assumeserver 192.168.1.1client 192.168.1.3
content of /etc/exports is:
/home 192.168.1.0/255.255.255.0(rw,sync,no_root_squash)
/home/nfsroot 192.168.1.0/255.255.255.0(rw,no_subtree_check,async,no_root_squash)
[code]....
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
I just installed ubuntu 10.10 x64 It worked okay for awhile, but now everytime I startup I get this error message:
GConf error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See http... (Details-1:Server ping error:IDLmg.org/CORBA/CoMM_FAILURE:1.0)
So my desktop is basically worthless (Can't vnc in, windows have no title bar, can't launch anything)
I'm trying to install nfs-kernel-server on my squeeze and have strange error.
Here the console output:
The following NEW packages will be installed:
I tried to google for this errors and find that manually restarting nfs-common, portmap should help but no luck.
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
I configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
Hi,I'm using a Dell Lattitude D620 laptop. I just installed the latest kernel 2.6.38 in my Squeeze amd64 :
Output of uname -r
2.6.38-bpo.2-amd64
Now I'm running on new kernel,everything seems fine except my wifi ( now I'm connected through ethernet ). Before I do the process with the guide in http://wiki.debian.org/wl to activate my wifi,I'd like to ask for some advice here,is this latest kernel support my wifi card? If yes,how to activate it?
Output of lspci :
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
[code]....
Since last few weeks i am struggling to setup printer connected to print server.
Here is the setup that i have:
I have Red Hat Linux machine from which i want to issue print jobs.
I have Windows Print Server having multiple printers connected to it.
I am able to print jobs from Windows client to any of these printers. But i am not able to print from Red Hat Linux. (i have verified that i can print using smbclient utility, but based on my reading, CUPS API could be used from application to discover, print and issue print jobs.)
I am not able to get the correct configuration for setting up CUPS client.
I'm running the current release of Debian with the 2.6.26-2 kernel. This is an upgrade from an older (2.4 kernel) series redhat release. One of the things I had working in the older system was a dns server with accompanying monthly update of the root hints file. I tried working through a dns how-to to set this up again, but it seems much has moved around since I last played with this. All of the files listed in the how-to are not where it says they should be. I am looking for a better reference on keeping the dns server running with current server information.
View 1 Replies View RelatedI wanted to setup my server as a router/gateway just for educational purposes and also when it succeeded i will keep the gateway and place it on the front line right after my modem.
My current setup as it is now :
The GATEWAY/ROUTER will be doing the main work to act as a dhcp server and firewall.
Now my setup as it is now :
So now what i ment to do was :
Let the clients connect to the gateway via ETH1 and all the stuff being router to ETH0 which is the NIC that is connected to the internet.
But now i have two huge problems :
1. The DHCP configuration seems to be fine the client machines get their ip adresses and /etc/resolve.conf looks fine to. But somehow the GATEWAY/ROUTER wont let me use the specified external DNs server so i cant do anything on these machines.
2. The firewall script [url] at line 27 should be DROP but if i use this line of code the GATEWAY/ROUTER cannot use his dns server settings so when i try to browse the internet or ping a machine outside my local network it would came up with nothing.
I have installed a linux server in my office to run 16 machines. Its main use will be a internal mail server but will be also running websites.
I have installed Ubuntu 9.10 server x64 and have got apache running.
I am looking for the simplest more robust solution for smtp, pop3 and imap. I have only ever used qmail before and found it a pain to configure and its getting old so I though I should probably try something new. I have not much experience with running pop3 or imap on linux so would love a suggestion on that.
I installed apache2 and mysql database on a Debian system. It is using reverse proxy on apache to redirect requests to apache2 running on any machine which is on Xen server as a Virtual host. I tried to install Drupal on it. Every thing went fine till I pointed my browser to:
http://IP[/url] of LAN where Drupal was installed/drupal
then I see an installation page of Drupal which welcomes me. I click install in English then it can not proceed to connect with database. Database configuration: Your web server does not appear to support any common database types. Check with your hosting provider to see if they offer any databases that Drupal supports.
I have created a database and username for Drupal separately. What should I check to. There is one more error
http://Public IP/some location/
Is showing me contents of Document Root but there is a folder named drupal on it. When I click on it I get error. Not Found. The requested URL /drupal/ was not found on this server. Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny8 with Suhosin-Patch proxy_html/3.0.0 Server at
What things should I check in for? I am also getting errors like:
- Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName on individual DomU's what should I check in. and on Dom0 when restarting apache2 I get following error.
- Reloading web server config: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
[Wed Apr 14 15:23:05 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
I installed Ubutnu 9.10 Server on my Dell Server for LAMP & OpenSSH server. After the install was complete, I noticed the the kernel installed on the server was 2.26.31-14-generic instead of 2.26.31-14-server.I am wondering why would generic kernel be installed from ubuntu-server 9.10 cd? And how do go about chaning to server kernel? Or do I even need to do that? Would generic kernel work as server kernel ?
View 2 Replies View RelatedI am trying to configure virtual pc in linux with Xen kernel,but it displays error. I am attaching screenshot of error here.
View 3 Replies View RelatedHow do I configure ssh on Debian server and client?
View 3 Replies View RelatedOn my Seagate DockStar torrent box running Debian Squeeze, I want to send email when a torrent download is done. What email client is good if I want to send e-mail via gmail server?
View 3 Replies View Relatedi want to know how to configure my sql server and clients in debian 5. what should be the server host name and root password
View 1 Replies View RelatedI have a Nis server on Suse 11 which is configured using Yast and nis clients on Suse and CentOs .All clients which is on the Suse Os is working fine. But on CentOs , users couldn't login using nis username.I have mounted home directory using nfs in fstab . I can switch to nis users homedirectory only when i am root. But nis users could'nt login on reboot.' ypcat passwd username ' is showing the output . No selinux is enabled in the client .Is there is any problem with Suse server to Centos Client in nis ??
View 2 Replies View RelatedRight now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?
i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB
if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..
I currently have a debian lenny high performance cluster running seamlessly using dhcp and tftpd-hpa. All nodes are completely diskless, and i would like to keep it that way. I now would like to have a client boot over local into a full KDE desktop.
Here's the cache.
1. I would like the client to also be a node. I would like it to handle processing as the other nodes do, but this one with a full desktop, with ALL data and privileges accessible.
2. The client will have its own workstation graphics. It will need to have that driver loaded without slowing the system.
3. Client will need to be able to use its own usb, bd-rom, dvd, audio, etc. even though it will be booting into the HPC.
4. Wireless. I cannot run 70 ft of lan across an apartment. not happening.
The idea is a media center applicable "powerhouse" with high-end power and graphics for easy media editing, 3d creation, and gaming. Will also be used for webcache over all local, file sharing, and other server applications.
HPC specs:
-headnode: hp compaq p4-ht 3.2 ghz, 4x500gb, 4gb mem, gigabit ethernet, wireless-N
-nodes: 4x p4-ht 2.2 ghz, 2gb mem, no-name brand slim desktops; 2x panasonic toughbooks p4-mobile 1.8 ghz, 1.5gb mem; 3x gateway p3 unknown specs; and 1 hp 530 notebook 1.6ghz core2 duo, 1.5gb mem
-client: hp compaq core2 duo 2.13 ghz, 4gb mem, wireless n, bd-rom, 2x dvd-rom, usb 3.0 card, bluetooth, 1gb AGP nvidia geforce 6800 dual-dvi, no hd.
I need to know how to set up this PXE.
Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
im trying to send pages of 4096 bytes from kernel layer of server to kernel layer of client over a network. previously i tried the foll. code , for data less than a 100 bytes it worked fine , but for something larger than that the computer hangs......(even the dmesg's wont say why) i also wanted to know how we could use the 'sendpage' function to solve this problem.
Code:
CLIENT'S KERNEL MODULE
struct iovec iov;
char buf[1024];
[code].....
I have one headless squeeze and two notebooks (one squeeze, one lenny).
When I have X (on headless squeeze) on lenny notebook, it is unacceptably slow. Something like it takes 3-10 seconds to redraw window (acroread, iceweasel, possibly xterm.)
It is not so slow when I use squeeze notebook. Yesterday, I upgraded lenny one to squeeze. Then, it is not slow any more!
i installed unix services for windows 3.5 on a windows xp pro box and it installed fine. I configured nfs on the debian box and exported the ip of the client computer and forwarded port 2049 correctly. I followed the instructions for setting up teh nfs client on windows. However whenever i go to tools->map network drive and type in the server-domain-name:/file-address it says it cannot connect?
View 6 Replies View RelatedI installed IBSng in ubuntu-server .but i can not start this server :Code:[root@myserver]# /etc/init.d/IBSng start.: 8: Can't open /etc/rc.d/init.d/functions"functions" file is in RPM base system . and ubuntu have not this file
View 2 Replies View RelatedI am using Cen OS 5. I have configured Samba server on it. I create a accounts suppose tom and 2nd is jarry in my samba server and map it in my windows xp computer as P drive (Private Drive) where the users can access their home directories. When tom tom enter into own account he can access his own home folder and same position with jarry. I want to create a common share drive using samba where all samba users can keep their data with their respective folders normally s drive i.e share drive. They can create file and folders and even all users can access the files of each others. Like tom can access jarry files and jarry can access tom files or folders to share their office work with each others.I want to know is it possible in samba to create a common share drive where all users share their files each others.
View 3 Replies View RelatedMy company support a client with an old Redhead server " Linux version 2.6.9-5.ELsmp [URL] (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 SMP Wed Jan 5 19:30:39 EST 2005" My IT department wants to move this old server to a VMware machine and I'm trying to check if this project can fly. Me my self never worked on an old Linux server there for my first question is can I upgrade the kernel with the command yum -y install kernel..... and when I'm done I'm still going to have the old kernel just in case?
View 1 Replies View RelatedI'm trying to connect to my server (to the gnome session) using vnc. I run vino-server on debian
I get pass the authentication (configured none) but I get a blank screen instead of my session.
Log from vino on the console:
root@B10-20-30-4:/etc/vnc# /usr/lib/vino/vino-server
** (vino-server:2547): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-7l6BcHLxb5: Connection refused
(vino-server:2547): EggSMClient-CRITICAL **: egg_sm_client_set_mode: assertion 'global_client == NULL || global_client_mode == EGG_SM_CLIENT_MODE_DISABLED' failed
20/03/2016 05:20:28 PM WARNING: Width (3046) is not a multiple of 4. VncViewer has problems with that.
20/03/2016 05:20:28 PM Autoprobing TCP port in (all) network interface
20/03/2016 05:20:28 PM Listening IPv6://[::]:5900
[Code] .....
I am trying to update PHP on a centos server by using
Code:
yum update php which results in the following...
Code:
Setting up Update Process
Setting up repositories
plesk 100% |=========================| 951 B 00:00
update 100% |=========================| 951 B 00:00
[code]....
Error: Missing Dependency: php-common = 5.2.9-1.el4.art is needed by package php-xml I think PHP was previously updated using the centosplus repository which may be causing this problem. yum install php-common results in a nothing to do error.
I have a small home-office network. On that network I have two linux computers, one is a client the other a server.
On the server I have NFS Server setup and mount some NFS exports on the client computer.
On the server I have the firewall on and here it becomes a little tricky.
Since both the server and the client connect to the router the interface (eth1) is theoretically both an internal & external zone.
The router is commercial grade and therefore has a good firewall on it which is also setup. Therefore the firewall on the server is really more of a backup than a necessity. But that's fine, and by having the server's firewall on 'fail2ban' is able to work which I like to have working so I don't want to just turn off the server firewall even though I have good security from the router.
However, when I turn on the server's firewall, the client computer cannot see the NFS server when scanning for server -- done by: clicking on "Choose" next to "NFS Server Hostname" when adding an NFS share in the NFS Client in YaST. Clearly something is being blocked even though I have both "NFS Client" and "NFS Server Service" allowed in the server firewall. The Firewall config. files for these are below.
The Firewall configuration is pretty much "out of the box". That is I have the services I need opened up for the external zone, the other zones are left at their default which means the internal zone, although not used (i.e.: attached to any interface), is completely open.
The perfect solution I guess would be to setup my client computer to connect through a different NIC (perhaps eth0), make that the "Internal Zone" and therefore allow all traffic through to it while still blocking the server from the external zone. However, I cannot make that physical change to my network for now so I am looking for an in between (non-perfect) solution.
In this case I am guessing that means opening up extra NFS ports to the external zone so I have full NFS functionality. I don't mind this because like I said, the router firewall is the main line of defense anyway.
So, given all of the above could someone tell me what I would need to additionally open up in the server firewall to make the NFS server detection work on the client while the firewall was on. Or, if you have a cleverer/better solution without me changing my physical network that would be great.
Hopefully I have written this in enough detail and clearly enough so that all the parameters are clear but if not, feel free to ask me what you like and I'll try to make it clear.
Code:
## Description: Firewall Configuration for NFS kernel server.
#
# Only the variables TCP, UDP, RPC, IP and BROADCAST are allowed.
# More may be supported in the future.
code....