I have one Windows-XP on Machin 1 and one Linux on Machine 2.
I want make Linux machine as CVS server and Windows Xp as CVS client.
How to setup CVS Server in Fedora-11 machine and CVS client in Windows Xp?
Photo : http://img27.imageshack.us/img27/5864/cvsserver.gif
I have one Windows-XP on Machin 1 and one Linux on Machine 2. I want make Linux machine as CVS server and Windows Xp as CVS client. How to setup CVS Server in Fedora-11 machine and CVS client in Windows Xp?
View 1 Replies View RelatedI would like to know how to install a webmail server and a suitable client to help connect to it that is compatible with both windows and linux ubuntu.
View 1 Replies View RelatedI have a small home-office network. On that network I have two linux computers, one is a client the other a server.
On the server I have NFS Server setup and mount some NFS exports on the client computer.
On the server I have the firewall on and here it becomes a little tricky.
Since both the server and the client connect to the router the interface (eth1) is theoretically both an internal & external zone.
The router is commercial grade and therefore has a good firewall on it which is also setup. Therefore the firewall on the server is really more of a backup than a necessity. But that's fine, and by having the server's firewall on 'fail2ban' is able to work which I like to have working so I don't want to just turn off the server firewall even though I have good security from the router.
However, when I turn on the server's firewall, the client computer cannot see the NFS server when scanning for server -- done by: clicking on "Choose" next to "NFS Server Hostname" when adding an NFS share in the NFS Client in YaST. Clearly something is being blocked even though I have both "NFS Client" and "NFS Server Service" allowed in the server firewall. The Firewall config. files for these are below.
The Firewall configuration is pretty much "out of the box". That is I have the services I need opened up for the external zone, the other zones are left at their default which means the internal zone, although not used (i.e.: attached to any interface), is completely open.
The perfect solution I guess would be to setup my client computer to connect through a different NIC (perhaps eth0), make that the "Internal Zone" and therefore allow all traffic through to it while still blocking the server from the external zone. However, I cannot make that physical change to my network for now so I am looking for an in between (non-perfect) solution.
In this case I am guessing that means opening up extra NFS ports to the external zone so I have full NFS functionality. I don't mind this because like I said, the router firewall is the main line of defense anyway.
So, given all of the above could someone tell me what I would need to additionally open up in the server firewall to make the NFS server detection work on the client while the firewall was on. Or, if you have a cleverer/better solution without me changing my physical network that would be great.
Hopefully I have written this in enough detail and clearly enough so that all the parameters are clear but if not, feel free to ask me what you like and I'll try to make it clear.
Code:
## Description: Firewall Configuration for NFS kernel server.
#
# Only the variables TCP, UDP, RPC, IP and BROADCAST are allowed.
# More may be supported in the future.
code....
My desktop is running 'buntu 9.10 and I have recently aquired a couple of half decent servers running Windows server 2003. I have a few windows app's that I use regularly for work that I have had limited success in running with wine or in vm's. I stumbled upon a how to to call apps in a vm to run seamlessly on the host desktop and did some playing and have succeeded in calling app's on my servers from my 'buntu desktop, the command I have set in my launcher for one of them (DIALux)
My question is, can I change the default application/file association in 'buntu with a custom command so I can double click on a file and have it open in one of these remote app's??If I can, what is the correct custom command to be using as using the above doesn't work at all, it just tries to open the file with rdesktop not the remote app.
I have a CentOS + Samba server and Windows XP client machines. Users, passwords and permissions are entered on the server machine.users and passwords ( same as on the server ) are entered in the XP client machine.When attempting to access a public file on the server using a XP client machine and the IP address of my server, I am asked a user name and password and none of the already entered seem to work. I cannot access the server file (prompted again and again to enter user name and password). What did i miss
View 7 Replies View RelatedI configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
I am using VMware player running Ubuntu10.04. I have setup a NFS server machine and a client machine. On my NFS server,
eth0 inet address:192.168.126.129
eth1 inet address: 192.168.255.129
On my client,
eth0 inet address:192.168.126.130
eth1 inet addess:192.168.255.128
Am I right to say, from the server machine, if I ping 192.168.126.130, I am calling the client machine? NFS server ip address is 192.168.126.129? and what about 192.168.255.129? and 192.168.255.128?
How can i setup SSH server on one machine and openssh client on another machine running suse 10.3
View 2 Replies View RelatedI want to explore DNS and Sendmail. So I downloaded exe of Vmware 2.0 on Windows Xp. I installed Fedora Linux on Both.
Now I have bridged networking and do did provided:
Instance 1:
Machine IP: 192.168.1.100
Instance 2:
Machine IP: 192.168.1.101
BIND Software is installed on both the machine.
I want to make 192.168.1.100 as Server and 192.168.1.101 as Client.
Also do let me know how can I setup DNS server?
Will it be possible to learn DNS server and client configuration through VmWare?
I currently have a debian lenny high performance cluster running seamlessly using dhcp and tftpd-hpa. All nodes are completely diskless, and i would like to keep it that way. I now would like to have a client boot over local into a full KDE desktop.
Here's the cache.
1. I would like the client to also be a node. I would like it to handle processing as the other nodes do, but this one with a full desktop, with ALL data and privileges accessible.
2. The client will have its own workstation graphics. It will need to have that driver loaded without slowing the system.
3. Client will need to be able to use its own usb, bd-rom, dvd, audio, etc. even though it will be booting into the HPC.
4. Wireless. I cannot run 70 ft of lan across an apartment. not happening.
The idea is a media center applicable "powerhouse" with high-end power and graphics for easy media editing, 3d creation, and gaming. Will also be used for webcache over all local, file sharing, and other server applications.
HPC specs:
-headnode: hp compaq p4-ht 3.2 ghz, 4x500gb, 4gb mem, gigabit ethernet, wireless-N
-nodes: 4x p4-ht 2.2 ghz, 2gb mem, no-name brand slim desktops; 2x panasonic toughbooks p4-mobile 1.8 ghz, 1.5gb mem; 3x gateway p3 unknown specs; and 1 hp 530 notebook 1.6ghz core2 duo, 1.5gb mem
-client: hp compaq core2 duo 2.13 ghz, 4gb mem, wireless n, bd-rom, 2x dvd-rom, usb 3.0 card, bluetooth, 1gb AGP nvidia geforce 6800 dual-dvi, no hd.
I need to know how to set up this PXE.
how to setup a home network for learning purpose. i have two laptops and a desktop connected to a modem-router for broadband (wired connection), i want to setup one as server and the others as client.
View 2 Replies View RelatedI was trying to setup SSL Client authentication on only one virtual host. Here is a brief excerpt sample of my conf file for the virtual host:
<VirtualHost xx.xx.xx.xx:443>
SSLRequire %{SSL_CLIENT_S_DN_O} eq "something"
SSLVerifyClient require
SSLVerifyDepth 2
</VirtualHost>
But when I try to check for syntax errors tells me SSLRequire not allowed here I do not want to add SSLRequire on the main httpd.conf because I only want it for one virtual host. The rest of the virtual hosts do not need it.
I am trying to ftp a whole directory tree using vsftpd as ftp server in fedora11
Code:
I am getting error while transfering a directory tree ...
I've got a home server running Ubuntu Server 9.04 and several machines running Ubuntu Desktop (9.04 and 8.04) and Windows (XP, Vista and 7). Now what I want to do is to create a domain and directory server similar in function to Windows Server w/ AD and join my other machines to the domain, but am not sure where to start. I already have file shares with Samba but now I want to setup a domain.
View 3 Replies View RelatedI have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors.I have two Geforce Fx3500 card in the machine.
View 10 Replies View RelatedI have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors. I have two nvidia Fx3500 card in the machine. I have tried the 173, 185 and 190 driver - same thing.
View 2 Replies View RelatedI'm running a Fedora 13 print server, with CUPS package:
Whenever I try to print from a Windows (XP or 7) client to a Samsung ML 3050 printer, the printer pauses itself with the error:
I setup Windows clients with the following URL:[url]
Output from log file attached. This used to work fine previously from Windows, and I can still print from Linux clients.
I have a wireless router situated in another room. I am able to access this router (and consequently the internet) through a Windows laptop that has a wireless card in it. However, my other laptop that has Ubuntu 10.10 installed on it, doesn't seem to have a wireless card in it, and I have confirmed this by running the commands
Code:
lspci
and
Code:
iwlist scan
I briefly was able to share a folder in my Windows machine, and access it through my Ubuntu machine, after connecting both laptops with a cross-over cable. However, I can't even ping the Windows machine from my Ubuntu machine anymore, after trying to configure the IP addresses. I think I screwed it up.
Also, although this is not an Ubuntu issue, I have a weird Windows problem, where I can't access the Internet when both wireless and wired ethernet controllers are active at the same time. It would be a bonus if you could solve this problem too for me. I was surfing online for a solution to this problem for quite some time, but I was unable to comprehensively understand and implement what I browsed through. Also, some of the guides, like for example, that on configuring Samba, seem to be outdated, as the terminal tells me something like the package (that was required to be installed by the guides through sudo apt-get install) has been superceded. Hence I post here for clear, concise and easy-to-understand help from you gurus. It would be great if I could achieve the end result of being able to access the internet on my Ubuntu machine (through the Windows one).
I was able to sort out configuring TigerVNC in my Scientific Linux 6 and was able to make me see my own dekstop in VNC.
I installed TigerVNC in another machine running Windows 7 (starter).
how can I be able to connect these two machines in VNC. We are networked by a router at home.
I want to make SL6 as server and Windows 7 as client.
I'm trying to setup a linux box to act as just a DNS server. Its something I'd like to use just for WAN type requests and leave other domain related things to the Server running WIndows.At this point on my Linux box, I can run queries and nslookups from it. I can not however, from a Windows box, run a NSLOOKUP command from the Linux box which is telling me to check the permissions from Linux to enable that for the clients. It's enabled.From a C: I type in nslookup - *ip of Linux box* and it tells me -- Can't find server name for address.
View 4 Replies View RelatedI have NIS and NFS Server in Linux EL5 and i want to make client as windows..How to make windows as client for Linux server..Can any one explain me more detail.
View 3 Replies View RelatedI have a very nice SUSE 11.2 Samba PDC that runs well with Windows XP clients. I am using NETBIOS for name resolution since I dont want to put in a DNS server because my router already has one, Im pretty sure it would make things more complicated. I enabled wins support in smb.conf and made the name resolve order with lmhosts first. lmhosts lists all the ip adresses with their computer names in capitals. I hope thats right. I set up my windows 7 with the reg file from the samba wiki on windows 7 [URL].
That's great now I get the old screen from XP in windows 7 when joining the domain. I gave the machine netbios name MAINPC a smb trust account MAINPC and added the unix user MAINPC$ that should all work. I manage to successfully join it says welcome to domain, afterwards an error appears "changing the dns name of this computer to "" failed" and something bout not finding the domain controller. although I joined. then I resatart and when I try to log on it says "trust relationship failed". How to make it join and logon properly.
I have set up my Openvpn Server in Centos and it is working fine. Windows XP clients are able to connect the OpenVPN Server and access the network. This is a customized OpenVPN Gui Client. Now I need the customized OpenVPN Client for MS Windows 7Bit. I am using openvpn-2.1.4-install OpenVPN Client in MS Windows 7 64Bit. This is a executable and working fine in the said architecture. Now I want to compile this version. I am following the given steps at : [URL].. As per the direction i have copied the source from 2.1.4 and tried to compile, but compiled copy is giving the error " An error occurred Installing the TAP-Win32 Device Driver". I have tried this compilation by making every change and hack but all in vain.
I think that there are some certain steps which are missing and not documented any where. And sure that someone in forum will know the facts.
I am facing the problem in squid server. I configured the squid transparent and its
working fine and browsing but when the clients are configuring the ms outlook than squid is not allowing the smtp(587) and pop3(995) request. email send and recieve are failed.
I have configured samba in linux .i can share file from windows client. we are not using any domain or ldap. using workgroup only. kindly let me know is it possible to change the smbpassword from client.
View 1 Replies View RelatedI have been messing around with freenx to see if I can support my customer via remote desktop... I have installed the server on Ubuntu Karmic and the client on Windows 7. I love linux but need the windows computer for customer work and that is why I chose to install the client on windows. I setup the server the best I could and created custom keys which I then copied to windows and imported them to the freenx client. I am looking for security for my customer and that is why I chose custom keys... There are several issues to deal with but I want to just get started to see where it takes me. I added the test server computers ip address to the freenx client configuration and tried to connect to Ubuntu... I have left the port as 22 at the moment
Desktop setting on the client...I chose vnc which seems to be a good choice according to all the material I have been reading....Other settings I have left alone at the moment to see how things work.... All that said - I have the login window asking for information... I have the password asking for information....and I have the session wanting information....? Obviously I understand that login info can be set on the server and the password...but I haven't seen how to set up that? Of course I am testing the server from a client on my home network at the moment - but the customer has his own router as do I so those settings will need to be looked at as well.
i have a centos 5.5 server running tomcat,oracle xe,apache etc..i would like to be able my windows machine to access this server by name, and not ip, for example have http://backserv:7080 for oracle xe web admin and so on..i know one way is DNS, but if i install oracle on a windows machine in peer-to-peer network, i can allready access with by it's name. o i'm guessing i should do something with samba, wins or something like that.never mind i got now for the REAL complex stuff of insalling web sphere 7 without user interface (need to look for a response file).
View 2 Replies View Relatedi have an ubuntu server 4 windows client..i use putty or webmin. would like to copy some folders for example: "My houses"to be backup everynigth to the ubuntu server..can somebody give me an easy way for doing this with rsync and smb or cifs.
View 4 Replies View Relatedi installed unix services for windows 3.5 on a windows xp pro box and it installed fine. I configured nfs on the debian box and exported the ip of the client computer and forwarded port 2049 correctly. I followed the instructions for setting up teh nfs client on windows. However whenever i go to tools->map network drive and type in the server-domain-name:/file-address it says it cannot connect?
View 6 Replies View Related