Fedora :: Create Server Accessible Through The Wan Port?
Nov 26, 2009
My school computer Crasht, so i thoug hey i wana create a linux server, so do anyone know how to make a Fedora server that can be acest thru the wanport ( acest thru the web ) for sharing school stuff etc ... any one know? or know where i shoud look for manuals?
View 1 Replies
ADVERTISEMENT
Jan 25, 2010
So if I do
dmesg | tail and find out that
lp0: using parport0 (interrupt-driven).
lp0: console ready
[root@Juha Juha.Koskiniemi]# cat /proc/bus/usb/devices
What is it fro following?
lspci
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
02:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
02:00.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
02:00.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 02)
02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03)
02:02.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
And how to evaluate the list of cat /proc/bus/usb/devices? I am asking this since seems that parport is recognized but why I can not access the it to via gtkteminal by using /dev/lp0
QGtkStyle cannot be used together with the GTK_Qt engine.
Qt: Session management error: None of the authentication protocols specified are supported
opening failed
How to edit thread header since the misspelling?
View 2 Replies
View Related
Apr 16, 2011
Have previously moved my ssh server from 22 to 4455 just by moving the port in sshd_config. This is done to minimize the log entries resulting from brute force attacks.However, it seems like Zimbra and other local services expect to find the ssh service locally available on port 22, so I figured it's better to move the port in the firewall so that it remains configured on port 22 in sshd_config, and instead use iptables with a nat/port rewrite to move 4455 incoming to 22 locally.
Isolated this works as long as I also keep allowing port 22, but the moment I close port 22, port 4455 is also dead, which sort of defies the purpose
View 2 Replies
View Related
Dec 31, 2010
I have reinstalled CentOS 5.5 on my un-managed VPS. Everything is fine except port 80
I am trying to access IP address in Internet Explorer but seems port 80 is not accessible.
I have checked by changing Listen 80 to Listen 90 in httpd.conf
and accessed the ipaddress with port 90 i.e. 208.89.213.70:90 and apache page was displayed
I need help on how to resolve this issue
View 1 Replies
View Related
Nov 4, 2010
I am trying to have a serial device connect to my ubuntu machine via the com port, and forward that comport over the network to a windows box so that I can configure/access the device. I have looked into socat/ sredird but still haven't found an option that I can get to work.
View 1 Replies
View Related
Sep 22, 2009
i am working on fedora 10 and configured dns on my college lan which already has it's dns at 192.168.5.20 .So i configured my private dns server at 192.168.101.91 which is my ip too.And the domain name is the host name of my system for example server.onkie.com.MY dns port 53 is shown when i do nmap localhost but but doesnt show when i do nmap 192.168.101.91 .Also when tested my server on other computers on my lan with there primary dns as 192.168.5.20 and secondary as 192.168.101.91 they cant access my site at my system with the name server.onkie.com . nmap localhost
[Code]...
View 1 Replies
View Related
Sep 22, 2009
I am working on fedora 10 and configured dns on my college lan which already has it's dns at 192.168.5.20 .So i configured my private dns server at 192.168.101.91 which is my ip too.And the domain name is the host name of my system for example server.onkie.com.MY dns port 53 is shown when i do nmap localhost but but doesnt show when i do nmap 192.168.101.91 .Also when tested my server on other computers on my lan with there primary dns as 192.168.5.20 and secondary as 192.168.101.91 they cant access my site at my system with the name [URL].. . nmap localhost
Starting Nmap 5.00 ( http://nmap.org ) at 2009-09-22 21:24 IST
Interesting ports on onkar (127.0.0.1):
Not shown: 993 closed ports
PORT STATE SERVICE
22/tcp open ssh
53/tcp open domain ----the dns is running
[Code]...
I already disabled my selinux and iptables ..but then also it's not accessible in Lan .
View 1 Replies
View Related
Mar 24, 2011
I want to create a combined portable Ubuntu / USB stick.For this I intend to install Ubuntu to my 16 GB USB Drive. I am going to install some rather big programs (Matlab, Maple...) and therefor, I think the 4 GB persistent space in different startup-USB creators are to small.Because of this, I want to install Ubuntu to the USB drive, to get full functionallity. Also because of the small USB Drive size, I dont want to create two different partitions. For USB Drive use, I want to be able to save files larger then 4 GB (ie. not FAT32).
How can I create a fully functional Ubuntu USB, that can also be accessed from Windows? I understand that NTFS and Ubuntu is a bad mix, FAT32 have file size restrictions, and Windows cant accesss ext3/4.I saw someone talk about installing Ubuntu using the 'install in windows' to bypass Ubuntu-NTFS problems, but the link was broken, and I could not see how it was done. Also this [URL] talked about making the home folder accessible, but the linked site is now down.
View 5 Replies
View Related
Dec 2, 2010
How to create the virtual web site (name based) accessible on http and https simultaneously ?
Example
server have ip address: 192.168.251.22 and virtual IP address=192.168.151.22
Target: create VirtualWebSite(name based) accessible on http and https simultaneously. ?
I can create a virtual site(name based), but he will be accessible ONLY on http or ONLY on https.
View 9 Replies
View Related
May 2, 2010
I have a mail server i need it to send message via port 587 not port 25, i make some changes to my postfix server which i use and it is already successed making a telnet to 587 port like it :
[Code]....
View 3 Replies
View Related
Feb 18, 2010
I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
View 10 Replies
View Related
Sep 6, 2010
We are trying to create a message forwarder program that receive a message on Port A and pass it on t Port B. Also receive a message from Port C and Pass it on to Port D as follows.
[Code]...
View 4 Replies
View Related
Sep 29, 2010
have to create a webhost on an running fedora server which runs multiple webpages + a coldfusion serveri have to add an coldfusion virtual host to these.what i would do:*crate a new user & group*enter vhosts.conf and copy an existing host and modify it for the new one.*create an new folder and copy the main files (phpstarter and webroot) *chown the files for the right useri think an apache graceful would be needet
View 1 Replies
View Related
Sep 23, 2010
I am on home internet access so it does not have a fix IP. I would like to set my web server to be accesible from outside. So what I do? First I must set my router to point access for port 80 to this machine. Then in the machine I open port 80 right? Then what software must I install is it no-ip?
View 3 Replies
View Related
Oct 21, 2010
VERY new to linux, erm but I have an issue that needs solving!I recently moved to university, where their network blocks sftp port 22, this means that I cannot connect to my FTP server which is running a version of linux.Now I've got this ftp server connected to a seedbox and it was created using the following walk through..Code:I have written this guide for a friend, but I though it would be useful for others as well.
There are several guides floating around, but I found that most always cock up in some way. This one is tried and tested to work on Debian Etch (on an OVH rps, but should apply to most servers).If there is a new stable release of rtorrent/libtorrent then I will update this guide to show you how to update it (without reinstalling the whole server).
At the bottom there are also instructions to install ftp access & some network monitoring software.Basically, I would really like someone to be able to construct the commands on how to change the listen port for sftp connection on linux or add another port to the list that Linux would use so that I could put in through putty.
View 2 Replies
View Related
Apr 27, 2010
using OEL 5.4, which uses Gnome 2.16 interface I can see my share from Windows, but whatever I do, I get messages that my share is not accessible. The whole user thing is quite complex, dont understand what user I should use on Windows, what password, what user should have what rights on linux.
I'll post smb.conf tomorrow ... The problem is that Windows lacks any decent error message, stating what kind of error message. Is there no Samba client for Windows?
View 6 Replies
View Related
Feb 4, 2011
I used vmware to create a guest OS in vmware.The IP of Guest Ubuntu is 192.168.43.129 and that of host Ubuntu is 192.168.1.3
Here is apache log when I access the site on machine where it actually is (guest os) as http://localhost
the apache log shows
Quote:
127.0.0.1 - - [04/Feb/2011:22:18:29 +0530] "GET /some/templates/default/images/ButtonsBack.gif HTTP/1.1" 304 - "http://localhost/some/templates/default/delos.css" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.8) Gecko/2009033100 Ubuntu/9.04 (jaunty) Firefox/3.0.8"
[Code]....
View 2 Replies
View Related
Jun 20, 2011
I'm installing Liferay as a WAR on Tomcat 6 on a new Ubuntu server.I want my portal accessible only via HTTPS, that's why I've enabled it via Apache.My config :Apache 2 (/etc/apache2/sites-enabled/001-https)
Code:
<VirtualHost my.domain.com:443>
ServerAdmin admin@domain.com
[code]....
View 6 Replies
View Related
Aug 5, 2009
If I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies
View Related
May 13, 2011
Cannot access installation media
Index of /repositories/GNOME:/STABLE:/3.0/openSUSE_11.4
GNOME:STABLE:3.0 (Medium 1).
Check whether the server is accessible.
Index of /repositories/GNOME:/STABLE:/3.0/openSUSE_11.4
File './x86_64/Mesa-7.10-1.2.x86_64.rpm' not found on medium '[URL]'
Fresh Install. Used Gnome3 link from here
openSUSE:GNOME 3.0 - openSUSE
Worked Yesterday. Not today
View 1 Replies
View Related
Jan 22, 2011
I setup a server last night and was able to remotely connect to it and access the internet with it. However, now that I have setup /etc/network/interfaces so that the server will have a static IP address, I cannot access the server remotely. Also, from the server itself, I cannot access the internet. Ping provides "unkown host" for any website I try. How do I fix this?! I don't know why this is happening.
Here is my interfaces file:
Code: ...
#The primary network interface
allow-hotplug eth0
# also tried with and without auto eth0
# auto eth0
iface eth0 inet static
address 192.168.133
netmask 225.225.225.0
gateway 192.168.1.1 This is the only NIC on the server.
Here is ifconfig:
Code: eth0
Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
inet addr: 192.168.1.133 Bcast:192.168.1.225 Mask:225.225.225.0
UP BROACAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txpueuelen:1000
RX bytes:0 (0.0 B) TX bytes: 0 (0.0 B)
Interupt: 29
View 2 Replies
View Related
Oct 20, 2010
I have a samba server set up on my computer, and I can only access the shares over the network by loging in as my main user. This works for all shares, on any drive. When I log in using my fileshare guest account, I get the list of shares, but after selecting one to connect to, it gives an error that the server isn't available. Any share off the boot drive won't work. I don't know if it has to do with permissions, or it's a config problem.
View 5 Replies
View Related
Jan 4, 2010
What port needs to be allowed/opened on the server side to allow Fedora 12 to access files on the server via NFS? My email and internet through the server work fine, but NFS file sharing/browsing does not work and I'm not having luck with forum and google searches finding what needs to be changed.
Fedora 12KDE, 32bit, install from liveCD, fully updated as of this date.
View 1 Replies
View Related
Jul 1, 2010
server: LAMP - debian, apache2, mysql, php5. a bit info on my network: There is a another service here that already uses port 443 already. It made my website time out, hence the move to another port. PLus, i dont want the 2 services sharing the port. What I am trying to do is forward 443 requests to another port where the SSL service is running so I can hide my port number in the URL.
Here is my sites available conf file:
Code:
NameVirtualHost *:80
NameVirtualHost *:443
NameVirtualHost *:####
[code]....
View 11 Replies
View Related
Nov 3, 2010
I just setup a ubuntu 10.10 box learn linux and to play around with, and want it to host my website. I can see the web site on my local network no problem but the outside world gets a time out message. I check to make sure everything is forwarded correctly on my router and the dns so i has to be something in ubuntu blocking out-of-network traffic how do i turn port 80 on to the outside world
View 4 Replies
View Related
Jan 3, 2011
We have a development server not accessible to the public used for testing which was setup for us. When attempting to have my PHP scripts upload an image to a folder, I have to CHMOD the folder to 777. Ideally, when a folder is created it has permissions set to 755 - I want to be able to upload to them. Is there a way to change permissions to allow the PHP scripts that run to be able to write to a folder? I know it has something to do with owner or group, but I don't know where to start.
View 2 Replies
View Related
Jul 22, 2011
It resides at 65.211.112.135 There are numerous domain names on this ip [URL]s Those are a few of them. Now if you try to ping 65.211.112.135 it does not respond, if you ping "www.barrierfree.us" it says pinging 65.211.112.135 but it also does not respond. BUT if you point your browser to one of the above domain names it will work, but it is quite slow.
View 9 Replies
View Related
Mar 9, 2010
i added users to the group om PDC after it i shared folder on linux server and given permission for users from this group, the folder is showed correct. After it i removed users from group, but the folder is accessible. Where is mistake?
[global]
workgroup = STSCOMPANY
password server = *
[code]....
View 3 Replies
View Related
Feb 7, 2010
Is there a way to change the port number that Evolution uses for pop server access? I am trying to access my Gmail through their pop server but they default to a different port number.
View 4 Replies
View Related
Dec 7, 2010
i have installed FTP server on fedora 13 its working absoultely fine on server but when im trying to open through other pc's browser it giving internet explorer cannot display the webpage.could anyone telme how to access my ftp server in internally as well as outside the network.I have installed ftp in server 2008 but still same issue.
View 1 Replies
View Related