Fedora :: Private BInd DNS Server Not Accessible To Other?
Sep 22, 2009
i am working on fedora 10 and configured dns on my college lan which already has it's dns at 192.168.5.20 .So i configured my private dns server at 192.168.101.91 which is my ip too.And the domain name is the host name of my system for example server.onkie.com.MY dns port 53 is shown when i do nmap localhost but but doesnt show when i do nmap 192.168.101.91 .Also when tested my server on other computers on my lan with there primary dns as 192.168.5.20 and secondary as 192.168.101.91 they cant access my site at my system with the name server.onkie.com . nmap localhost
I am working on fedora 10 and configured dns on my college lan which already has it's dns at 192.168.5.20 .So i configured my private dns server at 192.168.101.91 which is my ip too.And the domain name is the host name of my system for example server.onkie.com.MY dns port 53 is shown when i do nmap localhost but but doesnt show when i do nmap 192.168.101.91 .Also when tested my server on other computers on my lan with there primary dns as 192.168.5.20 and secondary as 192.168.101.91 they cant access my site at my system with the name [URL].. . nmap localhost
Starting Nmap 5.00 ( http://nmap.org ) at 2009-09-22 21:24 IST Interesting ports on onkar (127.0.0.1): Not shown: 993 closed ports PORT STATE SERVICE 22/tcp open ssh 53/tcp open domain ----the dns is running
[Code]...
I already disabled my selinux and iptables ..but then also it's not accessible in Lan .
My school computer Crasht, so i thoug hey i wana create a linux server, so do anyone know how to make a Fedora server that can be acest thru the wanport ( acest thru the web ) for sharing school stuff etc ... any one know? or know where i shoud look for manuals?
I'm thinking about installing a DNS server on Fedora 13 running bind. I looked around for available bind packages and found only these:
Now the first one contains bind utils the second one is for running DNS in a chroot env and the last one is a bind with some DB backend.
Does this mean that fedora 13 doesn't support/.provide "standard" bind server (I mean the one to run without chroot/without db backend) ? Or am I missing anything in my repolist which is :
I have been using a self signed certificate on my ubuntu server 10.4, using Apache.Today I bought a certificate from optimumssl. I created the csr and copied the key to the /etc/ssl/private as before. I then copied the newly supplied certificate to /etc/ssl/certs as before and changed my /etc/apache2/sites-enabled/domainname to pint to the correct certificate name.I now can't start Apache as I have this error below[error] SSL Library Error: 185073780 error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch
I am on home internet access so it does not have a fix IP. I would like to set my web server to be accesible from outside. So what I do? First I must set my router to point access for port 80 to this machine. Then in the machine I open port 80 right? Then what software must I install is it no-ip?
One of my clients is considering implementing GPG or a similar technology to encrypt internal emails. (They have a different system in place already for external mail.) I've done some reading on the subject but can't seem to find any information about how one might set up a keyserver. All the discussions I've seen so far talk about uploading the public keys to a server like keyserverDoes anyone know what software packages might be used to set up our own private keyserver on a Linux machine?
My goal is to have users(Unix Users like root on host1) use evolution /sendmail to send and receive emails between users( Unix users either from host1 or any other host on n a private network. The network is a private network with a few servers without any connection to Internet and no DNS. They resolve one another by /etc/hosts. with smtp configured am able to send and receive emails on one machine(host1) from unix user abc on host1 to user xyz on host1 and vice versa. the commad i used to test is host1@abc #echo "this is a test mail" |mailx zyx@host1 But when i tried sending from user abc on host1 to user xyz on host2 its giving error for DNS unable to resolve hostname.
the commad i used to test is host1@abc# echo "this is a test mail" |mailx zyx@host2 create a simple sendmail config so that i can send mails between multiple hosts using unix usernames within one network. I can use one of the server as mail server and rest as clients. I dont want to configure any other softwares for pop or imap access. I want to keep it simple and use evolution on the clients to send emails between one another on the private network without internet.
I have a server with Private IP and without any public IP. I want to transfer files to the private IP. I can log in to the Private IP through SSH. So basically I installed vsftpd in the server with Public Ip and tried to ftp the public ip from the private ip but it is not working.
using OEL 5.4, which uses Gnome 2.16 interface I can see my share from Windows, but whatever I do, I get messages that my share is not accessible. The whole user thing is quite complex, dont understand what user I should use on Windows, what password, what user should have what rights on linux.
I'll post smb.conf tomorrow ... The problem is that Windows lacks any decent error message, stating what kind of error message. Is there no Samba client for Windows?
I'm installing Liferay as a WAR on Tomcat 6 on a new Ubuntu server.I want my portal accessible only via HTTPS, that's why I've enabled it via Apache.My config :Apache 2 (/etc/apache2/sites-enabled/001-https)
I'm currently successfully using the Terminal Server Client to connect to an SBS 2003 server at a remote location. I've been trying to figure out if it's possible to connect to any of the XP machines on the LAN behind it. I currently have to use RWW in IE on a VirtualBox XP machine to do that, and I'd love to be able to get rid of VirtualBox completely.
The server has 2 NICs, one connected to the internet, and the other connected to the LAN. There is only one public IP. The computer I'd most like to connect to has a static, private IP. Anybody done anything like this or have any thoughts on how to get it to work?
My Ubuntu server is now providing routing duties to my network, but I'm having trouble opening ports to my network. I have a DynDNS account, so the IP is always current, but I can't ping even my IP directly.
My network map looks like
Internet > SpeedTouch DSL modem with DHCP > eth1 > Ubuntu > eth0 > LAN
With the modem providing a 192.168.1.xx IP to eth1, I can browse fine. The default gateway is my modem. I switched to the public IP of the modem so I could use iptables for firewall duties, but I was locked out of the internet. No gateway was set when I did that, but eth1 received the public IP of my modem.
I run a server that is connected to several other boxes in a private network (192.168.0.0). I have had no problems previously, but upon a reinstall of Debian squeeze I have no connectivity to the private network: a ping of other addresses on that network fail. Ping and connection to outside world is fine. This box is configured similarly to another on this private network which connects successfully. I have quadruple-checked all my basic information. I post my ifconfig below of the malfunctioning device, then the ifconfig for equivalent nic on a box connected succesfully to the private network.
Questions:
1.Could it be a cable problem? (I don't see how since the cables have not been changed I do not believe since my reinstallation).
2. What about the difference in the last lines of eth1 below and eth2 of the successful box. Is it significant that the bad eth1 reads Memory:fc3a0000-fc3c0000
I keep getting the above message when trying to login to my server using a private key,is there something I am missing from the configs here?Quote:
#$OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information.
Im using postfix on my server and i need change a ip adresses for mail boxes.Example : xxx@xxx.com using x.x.x.1 ip adres.and i need yyy@xxx.com how it can use x.x.x.2 adress.How can i do that ?And i need count which mail how much mail sended .How can i count and limit ?
i am trying to build a server that will allow us to jump to a private ip scheme. GB1 65.20.x.x gb2 1.1.x.x if i ssh to the 65.24 ip and configure gb2 i lose access to the server completely. am i missing a route somewhere? BTW this is ubuntu server 10.04
Cannot access installation media Index of /repositories/GNOME:/STABLE:/3.0/openSUSE_11.4 GNOME:STABLE:3.0 (Medium 1). Check whether the server is accessible.
Index of /repositories/GNOME:/STABLE:/3.0/openSUSE_11.4 File './x86_64/Mesa-7.10-1.2.x86_64.rpm' not found on medium '[URL]' Fresh Install. Used Gnome3 link from here openSUSE:GNOME 3.0 - openSUSE
I setup a server last night and was able to remotely connect to it and access the internet with it. However, now that I have setup /etc/network/interfaces so that the server will have a static IP address, I cannot access the server remotely. Also, from the server itself, I cannot access the internet. Ping provides "unkown host" for any website I try. How do I fix this?! I don't know why this is happening.
Here is my interfaces file: Code: ... #The primary network interface allow-hotplug eth0 # also tried with and without auto eth0 # auto eth0 iface eth0 inet static address 192.168.133 netmask 225.225.225.0 gateway 192.168.1.1 This is the only NIC on the server.
Here is ifconfig: Code: eth0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx inet addr: 192.168.1.133 Bcast:192.168.1.225 Mask:225.225.225.0 UP BROACAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txpueuelen:1000 RX bytes:0 (0.0 B) TX bytes: 0 (0.0 B) Interupt: 29
I have a samba server set up on my computer, and I can only access the shares over the network by loging in as my main user. This works for all shares, on any drive. When I log in using my fileshare guest account, I get the list of shares, but after selecting one to connect to, it gives an error that the server isn't available. Any share off the boot drive won't work. I don't know if it has to do with permissions, or it's a config problem.
I later ran sudo apt-get install ubuntu-desktop to see if that would help.
Code: #cat /etc/issue Ubuntu 10.04.1 LTS l Code: #sudo startx Fatal server error: xf860OpenConsole: Cannot open /dev/tty0 (No such file or directory) I assume this is because it probably doesn't have a video card. [Code]...
system is RedHat v4. I removed root: admin-name@domain from /etc/aliases then ran /usr/bin/newaliases.
The admin does not get the emails but now the email generated by the cronjobs is being sent to my-name@domain outlook email from "root@localhost.localddomain". No other changes were made. Where should I start looking for the definition of sent crontab email to my-name@domain?
Me and my friends have a website about games and stuff. The web hotel we use clears the app-pool when it has been inactive for 15 minutes. We don't have that many users yet so this is a problem because it takes ages to load if it has been inactive. I came up with the brilliant idea of calling the website with a script from my private server at home every 5 minutes or so. That way it would never go down.
I used some lines from another of my scripts: wget -q -O - http://homepage.se/ > /path/to/a/file.txt cat /dev/null > /path/to/a/file.txt and put it in crontab.
The script runs and all and I think it's better now but we can't know for sure if it is the scripts doing. Sometimes it's just as slow as ever and I start to think the script doesn't do anything. I've tried adding more wget-lines to fetch some different pages from the site and now running it every 3rd minute. No difference. Does anyone know another way to call a website in a way that would solve my problems? Am I using the wrong options with wget maybe? I've tried lynx (and piping to file) but it didn't work.
I and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
