Whenever my debian based server is rebooted 35 times it does an automatic disc check. When it does this and completes the disc check it doesn't properly establish network comms and I can't get in using SSH and I can't even ping the server.If I reboot again, it operates as normal but the problem is that the server is remote to me and I need to travel to the site when this occurs.
View 6 RepliesRecently installed Ubuntu 10.04 (I think) on my laptop as a dual boot with windows. Now, whenever I start my computer, the grub menu boots and I choose to run the generic ubuntu.
However, I get the message:
Stopping Automatic Crash Report Generation [FAIL]
And the screen freezes at that. No further progress is made and I have to restart my computer. The only way I can run ubuntu is by running it in safe mode with low graphics.
Today I upgraded my 10.10 to 11.04. Since the last step of upgrading, when it was restarted, I get stucked in consola where it is checking, and there is written fail at stopping automatic crash report generation. How can I repair it. I tried to do
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
sudo reboot
but it doesn't do it properly.
This is my first time to use Debian. I ordered the discs from LinuxCD - Debian 5.0.7. I am at the install point of Software Selection packages and I don't want to install unnecessary ones. Desktop environment and Standard system are ticked by default. I am installing to a desktop machine. I don't think I need Web server and going to Apache's FAQ still didn't answer my question whether I need it or not. I am not sure about DNS server, either. At this point, the only one I am sure I need is the Printer server. I found one page that loosely describes these software collections, but I am still unsure. Since most people do not use dial up these days it isn't taken into account of the description.
View 2 Replies View RelatedI wanted to ask how to restart the Debian Server. It should start daily, at 2-3 o'clock in the morning. Don't know how to program the server.
View 4 Replies View RelatedUbuntu has got this build-in check for errors which starts every 30 startups (if I remember well ) but my one gone missing... Strange. How can I turn it back on ?ound in the forum some information about Bonager, but is this original automatic disk check software shipped with Ubuntu or another piece of software ?
View 5 Replies View RelatedRunning Maverick on my desktop. Had a strange happening sometime last night. I generally leave the computer on all the time. When I got up this morning, I saw that my computer had rebooted and it said that it wanted to check for disc errors and that there was a problem with /home It checked until about 70%, at which point it stopped advancing for a half hour, so I did a hard reboot and choose "I"gnore when I got the message again.
The computer booted fine. The disc manager gui seemed to think my hard drive is fine, but I didn't do the full, slow check. My hard drive is about a month old. When I opened "open office" there as a document to recover, indicating that the thing did in fact crash sometime last night. The next odd thing- my "Opera" web browser doesn't open the browser. The command it is calling up is "/usr/bin/opera %U" Doesn't do anything, nothing shows up as running in the status monitor. Rebooting doesn't change anything with opera, and I still get the request to do a disc scan and to try to fix errors.
I uninstalled and reinstalled the latest version of opera. I uninstalled that and installed an earlier version of opera. Then, I reinstalled the latest version of opera. In terminal, typing "opera" gives me the message: Could not initialize Opera. Typing "sudo opera" opens Opera. Using the icon to open opera still points to the same place, and still doesn't work. So, here are my questions:
1- How do I get a logfile of the crash that happened last night?
2- How do I figure out if there is a problem with the /home folder or a problem otherwise with my hard disc? How do I fix that?
3- Where would I point the "opera" icon so it opens normally?
4- Is there any way to recover the information that I previously had in Opera, such as passwords? I used "my opera" to recover my latest bookmarks, but that doesn't save passwords. I'm thinking maybe those files are still around, even though I uninstalled and reinstalled opera.
I have a cluster of 50 machines and some machines already have ssh automatic login setup but I want to be able to check this with a script.
View 1 Replies View Relatedyou can refer to this ubuntu thread for context, but i'll sum up what i'm trying to do here to spare the reading. basically i want to be able to schedule a filesystem check with automatic repairs at the next boot time. but i'm not sure if this will try to automatically fix errors which is what i want to do. the reason i want to do this is because i experienced a power outage (the machine was not plugged into an UPS) and i want to make sure everything is ok.
View 2 Replies View Relatedafter installing Debian, I typed the command:
Quote:
update-rc.d -f exim4 remove
to avoid automatic start of this mail server (I use qmail). After several months, I did a reboot and exim is started! Looking at the history, I found this command:
Quote: dpkg-reconfigure exim4-config
Maybe this command has restored the init script of exim?
Can anybody confirm whether this 2U supermicro server will work with Debian 6.0.2. [URL].
View 3 Replies View RelatedBoot of a new minimal system hangs on "Stopping save kernel messages" or "stopping system v runlevel compatibility". I have ubuntu minimal iso x86_64 from usb stick created with unetbootin (don't have a cd drive on the machine in question), and after that I didsudo aptitude install gnome-terminal network-manager-gnome gdm geditsudo rebootnever got a system back. Annoyingly I can't boot into the recovery mode either, and it seems the keyboard is only semi-responsive (i.e. many dead keys when at the grub menu).qualms about reinstalling, but I've done this a few times and ended up at the same place every time.
View 6 Replies View RelatedI will be switching to Debian soon and have been forming a large script with a vbox test system to automate my system configuration when I switch.
When I install lamp (Or basically it's equivalent packages) apache and mysql start up automatically.
I could just use update-rc.d to remove the autostart but whenever there's a security or feature update for the package the files get replaced.
In addition, for some reason the system thinks it's a good idea to autostart half a dozen apache2 processes at the same time, sucking up a good 150Mb ram when not doing anything. (Anyone know why?)
How would I stop my system from doing this? Could I "chmod 000" the /etc/init.d files?
I'm running openSUSE 11.1. When I'm in Gnome or KDE or any Desktop session, the X server keeps running when I do an init 3, (i.e.) I'm still in the GUI instead of going to the console. When I type runlevel it shows that I'm in runlevel 3, but the X server is still running. The X server is not getting killed on an init 3.
View 2 Replies View RelatedI have report running through a Unix server. In this it takes out certain data of the database and sends it to each of the user's mailbox. But if some user replies or has set his out of office reply then this server keeps on sending h the same mail again and again. I need stop it.
View 5 Replies View RelatedI am having a problem in that the Web Server (Apache) keeps stopping. I know this as watchdog is emailing me. Then about 15mins later it starts again. I cannot seem to find why. can anyone give me pointers as where to look to find the issue.
View 1 Replies View RelatedI've build a package using dpkg-buildpackage but whenever I run aptitude safe-upgrade it upgrades the package I compiled as well even though it's the same version is there a way to tell it to leave it alone?
View 3 Replies View RelatedI am trying to install freemind without it downloading and installing openjdk as a dependency as it makes freemind run very, very slow. I have already installed sun-java-jre as a substitue but debian still wants to install openjdk.Any ideas how I can stop this? Also, should I assume that sun-java-jre is not installed properly as debian thinks the dependency is not met? I installed sun-java-jre with the auto bin file downloaded from the sun site. It is installed in /usr/java, is this right?I love debian! It's much faster and more robust then Ubuntu, even with squeeze testing (current version). Just a bit of a shock have to do some basic config myself.
View 2 Replies View RelatedI am new to Debian but not Linux-based systems. I have been experimenting a lot with Debian Lenny/Squeeze. I am growing more comfortable each day with the Debian design. Yet there remain many unexplored areas. I am creating a migration check list. Things to check, prepare, or reconfigure when moving from one Linux-based system to Debian.
I have a good computer background and my current check list probably is fairly good. Yet I would appreciate input and opinions from experienced Debian users of things to watch in such a migration. Login defs, passwd/group files, different directory locations, keymaps, services and daemons, etc. I am not too concerned with the desktop as I plan to stick with KDE 3.5 for a while and I can basically move those settings across.
summary: `sudo aptitude full-upgrade` (to jessie) ran long time before hanging @
Code: Select allSetting up fancontrol (1:3.3.5-2) ...
Installing new version of config file /etc/init.d/fancontrol ...
[ ok ] Stopping fan speed regulator: fancontrol.
Killing the job produced damage detailed below. How best to proceed?
details:
I'm upgrading a 7-year-old 64-bit Clevo/System76 laptop to jessie. My first run of `sudo aptitude full-upgrade` ended after fetching packages, with the following lines ending the console spew:
Code: Select allGet: 2051 http://http.debian.net/debian/ jessie/main user-setup all 1.61 [196 kB]
Fetched 1,816 MB in 17min 38s (1,715 kB/s)
E: This installation run will require temporarily removing the essential package python:amd64 due to a Conflicts/Pre-Depends loop. This is often bad, but if you really want to do it, activate the APT::Force-LoopBreak option.
E: Internal Error, Could not early remove python:amd64 (2)
So I started a second run with `sudo aptitude -o APT::Force-LoopBreak=true full-upgrade`. I left it running overnight, checking back periodically to OK overwriting `/etc/*` files with package-maintainer's versions. Friday I checked the box ~0900 and found
Only GUI application running was `gnome-terminal`, with the upgrade running in a single tab. This was working as intended, since I closed all other apps, and all but one `gnome-terminal` tab, before starting the upgrade. desktop environment (DE)=Cinnamon (also as intended) mouse was non-responsive: swiping the touchpad produced no movement keyboard appeared non-responsive (but more on that below) internal fan was running apparently full-speed (certainly as loud as I've ever heard it) console spew ended with the following 3 lines:
Code: Select allSetting up fancontrol (1:3.3.5-2) ...
Installing new version of config file /etc/init.d/fancontrol ...
[ ok ] Stopping fan speed regulator: fancontrol.
I left it running in hope the upgrade would recover, but after 7 hours nothing had changed, so I attempted to kill the job. The following all failed:
invoking shutdown via desktop menu (neither mouse movement nor pressing Super key produced any change) C-c/Ctrl-c in the terminal tab (nothing changed in the GUI) A-F2/Alt-F2 (trying to run another `gnome-terminal` to run `sudo shutdown -Ph now`, but no dialog appeared) C-A-F1 (to goto tty1 and run `sudo shutdown -Ph now`, but again no change in GUI/X)
The good news is, the box did reboot after `A-SysRq-[REISUB]`, though only to tty1. From there, `sudo dpkg --audit` produces these results.
So obviously the upgrade is incomplete; how best to resume it, or to debug the current situation before resuming? I'd prefer to fix the problem with `fancontrol` before proceeding, since the previous `full-upgrade` was quite long-running.
FWIW I also recorded the packages that the previous/broken `aptitude full-upgrade` wanted to {add, remove, upgrade}, and note that package=`fancontrol` is one that `aptitude` wanted to upgrade. So I'd like to know if I should just
Configure unpacked-but-not-yet-configured packages as directed by `dpkg --audit` reconfigure only-half-configured packages as directed by `dpkg --audit` process triggers for packages awaiting processing of triggers as directed by `dpkg --audit` reinstall packages missing md5sums as directed by `dpkg --audit` create a list of packages to remove (from those listed in the previous upgrade) add `fancontrol` to that list run `sudo aptitude remove [list of packages]` from tty1 create a list of packages to add and upgrade (from those listed in the previous upgrade) delete `fancontrol` from that list run `sudo aptitude install [list of packages]` from tty1 rerun `sudo aptitude full-upgrade` from tty1 (hoping that cleans up any remaining upgrade work, and does not try to reinstall package=`fancontrol`)
In December I finally filled up my root partition and broke Suse 11.1. I therefore resized my partitions and installed Suse 11.3 on /root. I didn't not touch my /home partition.
I notice that when I leave my machine and come back the screen has locked. I have tried to turn off the screensaver, but it hasn't worked. I have Googled, but unfortunately the screen shots don't look like what I have and the instructions to stop this do not seem to match what I am seeing on the screen.
Is there a way to do this via the command line?
I'm having trouble working with Xen on debian, I have many centos servers running Xen and have no problems. Everytime I start or stop a XEN vm it kills networking on the host OS for about 30 seconds. It doesn't respond to pings or anything, then it returns and everything works. I have asked about this issue in #xen on freenode.
View 3 Replies View RelatedI recently updated from Lenny to Squeeze. In Lenny I used to spin down my internal SATA backup drive like this:
# sdparm --command=stop /dev/sdb
It worked well in Lenny, but it doesn't work in Squeeze:
XXXX:~>sudo sdparm --command=stop /dev/sdb
/dev/sdb: ATA WDC WD2500AAJS-2 01.0
All I can hear is a click indicating drive head movement but the disk keeps spinning.
I have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
this blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
I'm trying to install files and everytime I manage to install from the first disc I succeed. When I get the the second disc I just keep clicking the "OK" button instead of "Cancel" and it keeps neglecting it.
View 1 Replies View Relatedis it save to install linux kernel 2.6.35.2 on Debian Lenny 5.0.5 or stick with automatic updates...
View 14 Replies View RelatedI'm sorry for this stupid question, but I have nowhere found it.I need to access to my USB disc from text mode (In Fedora LiveCD I see it and i can access /media/New Volume). In F12 runlevel 3 in mc I see it in /dev/disc/by-label as @Newx20Volume. But I don't know what is the correct path.
View 2 Replies View RelatedI have two Debian 5 servers which running on both the same version of OpenSSH (5.1p1) and OpenSSL (0.9.8g).
One week ago, I set ssh keys on both of them and create the file "authorized_keys". I was able to connect on each server via SSH without password (which is the purpose of ssh keys) but I had an issue with the SSH service and I had to restart one of my server. And since this time, when I try to connect to my other server with the same ssh command, the command ask me to type the password...
This is the result of the ssh command (with the argument -v):
Code:
OpenSSH_5.1p1 Debian-5, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to MY_SERVER [1.2.3.4] port 22.
debug1: Connection established.
[Code]....
I have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.