I am having a problem in that the Web Server (Apache) keeps stopping. I know this as watchdog is emailing me. Then about 15mins later it starts again. I cannot seem to find why. can anyone give me pointers as where to look to find the issue.
View 1 Replieswhats the difference between restarting/stopping apache using 'service httpd restart/stop' and apachectl restart/stop. I know that using 'service httpd restart' is actually a script in /etc/init.d/httpd but what about apachectl?
View 1 Replies View RelatedAny one have an idea How to clear apache cache without restarting apache server.
View 5 Replies View Relatedafter restarting Apache site is down?
View 1 Replies View RelatedPossibly related to this previous question, I would like to be able to run a task for a specified amount of time, then stop/kill it, then start it again. Specifically, I run the Folding@Home application on my Linux workstation. Periodically, it will have trouble logging-in to the home server, and will sit idle for a long time, but not release memory/resources it has claimed (yes, I realize this is likely a bug in the tool, but I can't fix that currently). Typically just the act of killing and starting the tool will allow it to check-in again. So, I would like to be able to run something like:
run_for <time> ./fah6
Does such a tool exist, or should I write a wrapper than nukes the fah6 client after, say, a week and restart it?
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
i know it's a very simple command to restart apache via ssh.
View 13 Replies View RelatedI have just compiled apache with the following command code...
View 4 Replies View RelatedI have just installed Ubuntu 10.04 and it works fine. Next, I attempted to install Apache 2.2.16 server on the machine. I was able to get Apache installed but I cant't get it to start. The command I used to get it to start is "apachectl -k start" and got the response "command not found". Then I used the absolute path which is "/home/Administrator/Downloads/apache/bin/apachectl -k start" and got the response"httpd: could not reliably determine ther server's fully qualified domain name, using 127.0.1.1 for ServerName(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80.no listening to sockets available, shutting down". Please advise me on what to do. My eyes hurt from looking at the screen for so long trying different options and reading almost all the apache install instructions that exists. Just ready to have it up and running.
View 7 Replies View Relatedi am using ubuntu 10.10. I had installed apache2 and subversion, using webdav, as described in the unbuntu wiki. SVN was working as expected, I could commit files, etc. I then installed php5 and mysql, as described in the ubuntu wiki, and i now get the following on apache restart:
apache2: Syntax error on line 203 of /etc/apache2/apache2.conf: Syntax error on line 2 of /etc/apache2/mods-enabled/dav_svn.load: Cannot load /usr/lib/apache2/modules/mod_dav_svn.so into server: /usr/lib/libgssapi_krb5.so.2: symbol krb5_authdata_context_copy, version krb5_3_MIT not defined in file libkrb5.so.3 with link time reference Action 'configtest' failed.
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
I am running a CentOS 5.6 Server with a website and Forum. The website has a contact form and users can email various people in the organization. I have setup sendmail to send any mails like this to my email address on a Windows machine.The problem is that there emails don't have a header which has the senders original email header. It comes from localhost on my sendmail. How can I get any mail generated from the apache site to ALSO send mail to root on the Centos Server? That way I should be able to see the header and report the spammer or block them.
View 2 Replies View RelatedI have a web server with the specs below and my apache server is being a hog using all my RAM 7gigs or 8gigs of ram. When there is a rush of traffic at once my whole server crashes and I have to reboot apache. The way my site is set up I have a tube script and I use the tube script to host videos on my forum I have 1000 videos on the tube script. I brought a bigger server and more ram because of the down time I been having . I am really trying to figure out why its crashing and using so much ram. I installed eAccelerator didn't seem to help with the apache server.
Intel Quad Core Xeon X3430 (4 x 2.40 GHz, 8MB Cache)
> 2-bay Supermicro Chassis and Motherboard
> 8 GB REG ECC DDR3 (twice your current setup)
> 250 GB Enterprise Grade SATA II
> 10 TB Bandwidth 1gig Uplink Port
> CentOS 64 Bit (Latest Stable)
TOP Command and free -m command screenshots are attached this is with only 160 people online at once
I saw many people were talking about how to optimize apache and mysql here and also in other forums and blogs. I am currently hosting some sites and some IRCD processes (a tiny network)in a dedicated server with spec:
Quote:
Intel Dual Core 1.6GHz E1200
1GB RAM
160 HDD
10Mbits port
We got about 30,000 to 40,000 page views per day. I would like to ask people here about the opinion of apache and mysql optimization based on this server spec and current number of page view.
I have Centos 5.4 installed on my server. Everything works perfect, however sometimes apache does not work properly. When I write my domain to browser it tries to reach the site, however it can't get any result. (There is no "browser couldn't find" error). The browser just tries to get the content.
When I login to my server with ssh using my domain name, there is no problem. (Named works.) When I give the "service httpd restart" command the problem disappears.I looked at httpd log files but there wasn't any problem at that time.I use the API's of the Facebook and Twitter, so there are many Curl requests are made with PHP. Could that be the reason?
I'M trying to configure SVN in CentOS 5 without Apache, the connection should be possible with some SVNClient like tortoisesvn or another.
Following this guide i proceeded:
yum install subversion
useradd -d /home/svnroot -c subversion svn
passwd svn
svnadmin create /home/svnroot/proyecto_1
pico /etc/csf/csf.conf (enabled ports and restart with csf -r)
[Code].....
how to connect to the repository from my PC?
I don't know how to do it
I understand that this svn are running with svnserve but i don't know the way to connect from my PC with a svnclient, like rapidsvn or another.
I need to do this to pass PCI compliance tests, I know it's not necessarily the best thing to do but it has to be done.
How would I go about compiling this version as it's not on the official repo?
I have installed apache 2.2 from source and it works prefectly.
I compiled and installed php 5.2 but php pages resolve to page not found.
I checked the logs but did not find anything also apache has loaded the php5 module successfully.
Below is the apache configuration
[URL]
operating system: CentOS 5.5 git version:1.7.3.4 ldap server:OpenLdap Http server:Apache 2.2 the software above have been installed. How to config /etc/httpd/conf.d/gitweb.conf file to let git authed by ldap?
View 2 Replies View RelatedI updated my CentOS 5 box recently. But after then my Apache can no longer work; every time I try to start apache, it says started OK but then dies immediately and no error message at all. When I tried 'apachectl restartI', it says apache not running. It has been running fine before the update. I've looked at /var/log/httpd.log but there is not any message about my problem.
View 14 Replies View RelatedI've installed Apache Tomcat--6 and even jdk1.6.I've even created a tomcat.sh file to start the serverautomatically and it includes the Environment variables also ($CATALINA_HOME & JAVA_HOME) for automatic startup.Next when i'm using http://localhost:8080 to call the server it shows unable to connect.I've tried changing the port no of tomcat in server.xml file. but still its not working.
-->Then i tried using--telnet localhost comand--it shows Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
Here I'[m stuck i don't understand how do i make the localhost work.
-->If I'm giving telnet localhost 25 the sendmail server is working.But the 80 and 8080 ports are not getting configured.
-->I've tried adding the port and its name in /etc/services file but still its not working.
-->When I'm giving the command--/sbin/chkconfig --list--->Its shows: xinetd based services:
...
...
telnet on.what should i do to get my tomcat server work properly.
We have Apache installed on CentOS 5.3 in our laboratory. Indeed the server is running fine for almost two years since it is actually the first CentOS 5 that was released just regularly updated. Now, most of our applications are custom made PHP applications and until now we somehow managed to avoid using PHP to fetch files that are on the internet itself. But now we are desperate because we need to allow PHP to fetch files through Apache but it seems as if Apache is not allowed to make a connection to the outer world. Additionally we use a proxy server to connect to the outer world so right at the beginning http_proxy is used to set that environmental variable. And for the root user it all works fine after that but it seems as if the apache user is not allowed to access the internet. Just to make a remark our web server can be accessed from the outer world so its a one way street for now.
View 1 Replies View RelatedI run mysqld on another server. I just switched to another dedicated server now, and i'm having trouble connecting to the mysqld server. If i run the php script from the bash console( php connect.php ) it works perfectly and connects to the mysqld server. However, if i run the script from apache ( http://localhost/connect.php ) it returns this: Can't connect to MySQL server on '(mysqld real ip)' (13) Mysql connection from another server(old httpd server) works perfectly, so it's not from the database server.
View 4 Replies View RelatedI'v multi v-host . need to make each V-Host work under separate user (not apache user).
There is one module/patch call " mpm-itk " . In Debian/Ubuntu every thing is sweet
just do
apt-get install apache2-mpm-prefork libapache2-mod-php5 or aptitude install apache2-mpm-itk
that is all
But in CentOS 5.3 , there is always some difficult different (Why ? I do not know)
Kindly, Look to this solutions : [URL]
Is there possibility to avoid this complications ?
- I need solution without compiling + patching the apache , Is this possible ?
The nagios admin interface apparently needs php (although, of course, the howto mentions nothing of the sort). So then, I copied the php.conf that had at some time been installed on the system, and then moved by me out of /etc/httpd/conf.d, back into conf.d. It's a fairly simple one:
#
# PHP is an HTML-embedded scripting language which attempts to make it
# easy for developers to write dynamically generated webpages.
#
LoadModule php5_module modules/libphp5.so
[Code]....
Possibly off-topic, as this is in a VServer, running a non-standard kernel, but both the host and the VServer are running CentOS, so.....I've been happily running a small web site on a CentOS 5.3 host, using Linux-VServer. (So it actually runs on a 2.6.22 special VServer kernel.)This *might* be connected with updating to 5.4, but I'm not sure how. VServer itself was not touched, and httpd runs inside it (that is, using the VServer's httpd, not the CentOS one. Vserver however, is running Centos.
Suddenly, anything I load into the VServer DocumentRoot is not visible. A ls -l of files that show and files that don't show the exact same thing. That is, for example-rw-r--r-- 1 root wheel 106314 Oct 5 22:38 mutt.html-rw-r--r-- 1 root wheel 390 Oct 26 22:09 new.htmlYet, mutt is viewable and new.html just gives me a 404.
So, I then edited the mutt.html.I added a line like line for testing or something similar.That too, does not show up. That is, the mutt page shows, but the change I made in it doesn't show. I've tried restarting the vserver, but that did nothing.(And yes, I did hit refresh on the browser and also used another browser, to be sure.)I raised apache log level to debug, but neither access nor error shows me anything.I'm not even sure what terms to use in googling, trying things like newer files apache not visible and similar have brought me no luck.
i'm running httpd 2.2.3-31 on a full update centos 5.4 , i need to enable mod_charset_lite on apache, how can do that?
View 3 Replies View RelatedCentOS 5.5 + Apache 2.2(httpd.conf) + SSL confiuguration(ssl.conf) gives following error in FireFox.Secure connection failed.An error occured during a connection to localhost.SSL received a record that exceeded the maximum possible length.Errorcode:s_error_rx_record_too_longThe page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
View 1 Replies View RelatedI have installed Apache on Centos, had no issues during setup, httpd seems to be running but I can't access my slice through [url]. It looks like Apache has some issues or something?
View 2 Replies View RelatedSo far I have came across three options.
1. Watchdog script
2. Daemontools - using "supervise"
3. Monit - open source monitoring tool
From what I can gather, daemontools is probably the best option. Unfortunately, the documentation on the developers site is very vague and I'm having a hard time getting this to work. I think I have it installed correctly, just don't know how to apply it to the service I want monitored.
how to get daemontools to work. All I want to do it monitor a server on my linux box. When it fails, I want it to be restarted automatically.