All i'd like to split my squidGuard.conf into 3 differents config files. The idea is that, I want 1 config file for src definition (my users), 1 config file for dest definition and 1 file for acl definition. And all of these files will be include in squidGuard.conf.
View 1 RepliesI use CentOS 5.4, Squid version 2.6 , squidGuard version 1.2. Squid works properly, squidGuard also works properli. I want to redirect all requirests from [URL] to [URL]. It seems that squidguard works:
Code:
[root@main ~]# echo "http://www.sex.com 127.0.0.1/ - - GET" | squidguard -c /etc/squid/squidguard.conf
http://www.infoborder.com 127.0.0.1/- - -
[root@main ~]#
But if I want to access site [URL] with a browser which is connected to squid, my browser get me the site [URL]
I have a setup of squid3 with ntlm authen and I use squidGuard 1.5 to filter my web traffic. My squid3 is authenticating users properly and parsing all rules. The problem is with squidguard which doesn't seem to filter out users. below is my squidguard config.
Code:
dbhome /usr/local/squidGuard/db
logdir /usr/local/squidGuard/log
[code]....
I have installed squid 2.7 and squidguard from OpenSuse repositories,and I use "redirect_program /usr/sbin/squidGuard -c /etc/squidguard.conf -d" in /etc/squid/squid.conf,but seems that the squidguard is not started after restart squid,
however,when I initialize the blacklist by "squidguard -C all",the cursor keeps blinking for quite a long time,what should I do
I'm trying to install squidGuard-1.4, I have a minimal install. I have installed squid-3.2.0.5 without any problems, but squidGuard is driving me crazy
I can run the ./configure with no problems but when I run make, or make install I keep getting this error:
Code:
make: *** [y.tab.c] Error 141
And that is is all, no more verbosity or anything else.
Error suggests that YACC is missing but bison is present, also db4 (tried with db44 and db3, same story).
Just in case you can see anything I cannot I've attached the config.log
I haven't found any updated instructions for adding squidguard to the new squid3 server. I tried following the old instructions for doing this, making changes to the text to point to the new squid3 locations, but this didn't work.
View 2 Replies View Relatednot blocking sites
Code:
dbhome /var/lib/squidguard/db
logdir /var/log/squid
dest block {
domainlist block/domains
[Code]....
under db I created a directory block where I created a domain file and a urls file dosen't seem to be working
I am using squid as a proxy server in my cent os 5 machine. I have downloaded and install squidGuard-1.4 using ./configure which it successfully do.THe problem is when I use make command it give me an error beacuse may it it is not compatible with BerkeleyDB. For
Code:
[root@localhost squidGuard-1.4]# make
making all in squidGuard-1.4
make[1]: Entering directory `/home/squidGuard-1.4/src'
[code]....
I am sure that it is due to patch missing .For that purpose I have download the patch "squidGuard-1.4-patch-20091015" and then extraxt it (untar) it. THe patch shows only these two files
Code:
[root@localhost squidGuard-1.4-patch-20091015]# ls
Readme.Patch-20091015 sgLog.c
I does not know how to apply the patch with currect squidGuard ?
I am using cent os 5. I want to ask two thing. By default Squid configuration file is place in /etc/squid/squid.conf and if we have downloaded the source code file of squid then it will be installed in /usr/local/squid/etc
when we install squidGuard it automatically installed under /usr/local/squidGuard and then we can see squidGuard.conf file.
The thing which I want to ask that is there any way to change the path of squidGuard to /etc/squid/squidGuard or it is batter to leave the default settings to install it ?
I'm having a problem with squidguard filter with AD authentication. I have downloaded the latest stable source package from squidguard site and I followed the instructions for the ldap(AD) authentication but it does not work at all.I have googled and tried everything but no luck. (first 30 hits on google) Anyway this is the LDAP auth part: http://www.squidguard.org/Doc/authentication.html at squidguard and this is how to build the package.
View 2 Replies View RelatedI have CentOS 5, squid installed and running (writing this on the proxy) and I have squidGuard running with Shalla's URL black lists
I have:
Now if I visit any of the domains or urls in the blacklist it just lets me go straight through.
I have chown -r the db/* folder...
Cant think of anything that will be stopping me?
I have installed ClamAV 0.95.3 into Ubuntu 9.10 (i386) fully patched
I am behind an authenticating proxy, so I've entered these details into freshclam.conf:
HTTPProxyServer myproxy.com
HTTPProxyPort 1234
HTTPProxyUsername myusername
HTTPProxyPassword mypass
code....
So I changed the perms to 0700 (user is clamav).
Now I get:
$ sudo freshclam
ERROR: Can't open/parse the config file /etc/clamav/freshclam.conf
I checked DNS resolution with this (which I found in a thread somewhere):
# host database.clamav.net
database.clamav.net is an alias for db.local.clamav.net.
db.local.clamav.net is an alias for db.other.clamav.net.
db.other.clamav.net has address 193.1.193.64
db.other.clamav.net has address 130.59.10.36
- I presume the installation can find the update site?
When trying to conigure via nvidia-setting using root (sudo) and then saving to config file I get the ' Unable to open X config file '/etc/X11/xorg.conf' for writing.' in a message box - below is what i get on terminal:
Code:
Traceback (most recent call last):
File "/usr/share/screen-resolution-extra/nvidia-polkit.py", line 75, in <module>
operation_status = main(options)
File "/usr/share/screen-resolution-extra/nvidia-polkit.py", line 51, in main
[Code]...
i`m tryin` to config my kismet conf file cuz i get this message FATAL: Please configure at least one packet source. Kismet will not function if no packet sources are defined in kismet.conf or on the command line i`ve googled few tutorials but cannot figure out what i should type there , i use Atheros 9285 , my wifi interface is wlan0 as u can see :
[Code]...
i know it should look like this : source=iwl3945,eth1,eth1 or source=madwifi_ag,wifi0,madwifi i`ve tried and changed for with my ath , wlan0 , but it still wont work, what i should type in those three lines after source= and what does it mean each .and if you could tell me how to determine what to type there or where does it say what to put there.
Samba is working fine, and I haven't used the config utility for some months now. but today, in trying to create another share, a warning dialog is displayed about lines that are not "understood". What is wrong and why is this happening now?Here are the lines from the warning dialog
297: recycle:repository = .deletedlou/%U
298: recycle:keeptree = Yes
299: recycle:touch = No
300: recycle:versions = Yes
[code]....
Running Red Hat (not sure of the build atm) and I need to be able to put all of the IP blocking in a separate file. It will eventually be uploaded to a large number of hosting accounts, and modified from time to time...so it isn't feasible to modify that many httpd.conf files each time we need to add an IP to be blocked. In httpd.conf I can add the "Deny from" line to the following directive and blocks it just fine:
Code:
<Directory "/var/www/html">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
[code]....
There is an include to pick up all *conf files in ../conf.d, and everything else in there is working just fine. I created a file called robots.conf; it currently has a set of mod_rewrite rules which work. So I added this to that file:
Code:
<Directory "/var/www/html">
Order allow,deny
Allow from all
Deny from 123.456.789.098
</Directory>
It is not blocking access from the IP with it in there.I've done all of the usual things; restarted Apache, cleared browser cache etc. I can also block it using that same directive in a local .htaccess.
i am having some issues with dual booting my SL6.1 and Windows. The situation is that i recently acquired an old hard drive from a non-working computer of mine with Windows already installed (i know the windows is functional, as i tested it on my new PC with SL6.1 currently installed & everything runs fine)
The problem is that after editing the grub.config to include windows, windows will no longer boot after an attempt to install a legit version of McAffee anti-virus software which coincidently was only after the first attempt at running both OS's in a dual-boot fashion. Except past the windows start up screen before the dreaded blue-screen.
Which is weird because SL6.1 OS will still boot & works perfectly fine like always, so it doesn't really make sense.
My current setup is:
Disk 1: Solid-State:
Boot Partition
SL6 LVM1: Root Partition
Disk 2: Hard Drive:
SL6 LVM2: User, Temp & Swap Space Partitions (Different LVM to Root)
Disk 3: Hard Drive:
Windows 7 Professional 64-bit
My guess is its windows MBR. The reason i say this is because the Hard Drive contents of the Windows software still appears intact when accessing the drive from the Linux OS. I don't won't to go through the rigmarole of re-installing both OS's. So hopefully their is a relatively simple solution.
it may be a simple doubt i have but i really want to know this,in the httpd.conf file under the server root of apache server.they have instructed not to add a slash at the end when mentioning or giving the path for server root.I think both will still remain the same, then y is that mentioned that way?
View 6 Replies View Relatedwhen installing mysql-server by this command sudo apt-get install mysql-server. Installaton is complete but i cant get a my.cnf file. Can anyone tell, what is the mistake i did and how to overcome from this error. Here, i am posting the results
sam-osm@dhcppc4:~$ sudo nano /etc/mysql/
conf.d/ debian.cnf
i need to config the file using the shell scripts..
i have set the static ip using shell scripts
1st it should ask the ip values 2nd it should check the file is exist or not 3rd then add the values or re edit previous values
i need to set only IP static
what is the role of /etc/sysconfig/httpd configuration file in apache server .
View 2 Replies View RelatedI am running Red Hat Enterprise Linux AS release 4 (Nahant Update 7). The server was recently rebooted and wouldn't come up. After some investigation we found that the system would not boot because several files had been zero'd out (not deleted):
* All of these files had a date of March 11, 2010 with a time 03:46
* A zero byte file called /halt was also found with a date of 08:46
We could manually boot to the latest kernel, but none of the startup scripts would run. We analyzed the system looking for any file created on March 11 that were also 0 bytes. Once we had a list, we were able to determine that the system could be recovered without a full blown reinstallation of the OS.
We did a rescue boot from the installation CD, mounted the system volume privately, and edited the grub.conf file. We then brought up the network and copied the needed files from another RHEL v4.7 system. Rebooted the server and check the OS, databases, and apps.
My question is - Has anyone seen this behavior before? I seems like we may have been cracked or at the very least someone has cleared the files needed to recover the system smoothly.
In my company have proxy server using Linux.
Ip Address Proxy Server 1 is: 123.16.201.23
Ip Address Proxy Server 2 is: 123.16.201.24
Every Client: 123.16.3.25,....
and 123.16.4.25,.....
....
- I want export config file on Proxy Server, but i don't know command and i see interface is command line. So hepl me command line and send file to my email.
- In config file on Proxy Server may be disconnect internet for user and Enable coonect internet for user. Hepl me do this?
- I using Ubuntu 10.04LST i want connect file Server on Server ( using WinServer2003).
I just go to company so i have everything don't know system.
I am trying to change the configuration of sendmail so that I can relay mail through google smtp server as suggested here.
First I ran 'm4 sendmail,mc > sendmail.cf' with the original .mc file that came with Fedora 10. There was no error.
I added the following lines.
Quote:
TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
FEATURE(`authinfo','hash /etc/mail/auth/client-info.db')dnl
define(`SMART_HOST',`smtp.gmail.com')dnl
define(`RELAY_MAILER_ARGS�, `TCP $h 587′)
define(`ESMTP_MAILER_ARGS�, `TCP $h 587′)
I ran ''m4 sendmail,mc > sendmail.cf' again and got this message:
Quote:
m4:/usr/share/sendmail-cf/mailer/procmail.m4:33: ERROR: end of file in argument list
I did not change anything in the procmail.m4 file. What do you think caused this error?
I'm using RHEL 5.4 and trying to use the system-config-kickstart to generate a ks.cfg file with all the settings already appeneded. After running the "system-config-kickstart --generate ks.cfg" command, the file gets created but it's missing the firewall configuration, partition information and so on.
How can these settings also be generated with the system-config-kickstart?
# /etc/init.d/dhcpd.conf -bash: /etc/init.d/dhcpd.conf: No such file or directory what is the problem? and how to configure out "joe"
View 5 Replies View RelatedI am on up to date 64-current. Installed Alien Bob's multilib packages on top of it as well as his kde packages. I changed inittab to go to runlevel 4 by default.I figured out that my system all the time creates /.config/Trolltech.confI think it shouldn't be there, but even when I manually delete /.config dir, it is created again.
Code:
vladimir@darkstar:~$ ls -la /
итого 97
[code]....
I'm building a new file/media server for my household to use, and would like to hear the experiences of others, and suggestions, or links to appropriate howto's. I'll be using two (2) 250 GB Western Digital RE4 drives mirrored via mdadm RAID 1 for the Operating System. The storage area will be handled by four (4) 500 GB Western Digital RE4 drives in a RAID 5 array, managed by an Areca 1210 controller.
What I'd like to configure is a basic Samba file server, on which we have individual user folders, and a shared drive. As well, I'd like to add the ability to manage our movie collection so it can be accessed by the Boxee Box attached to the television. Twonky looks promising (and I don't mind paying the $19.95 for something that works well). However, as this is new to me, there may be other solutions out there that are better, and easier to administer. Moving forward, I'd like to explore the feasibility of configuring LDAP on this machine to authenticate users on the network (perhaps even integrate the mail server somehow), and the remote users (only two) who VPN into the network using the pfSense firewall appliance. There are no Windows servers, so Active Directory is not a factor.
We have been struggling with a problem with the mysql-server package. This might be in the wrong category because our problems are with it on x86_64. Where the problem happens variables that should populate from the my.cnf don't, on other servers, they do, the my.cnf files are identical except for the server-id
The problem occurs on some of our machines but not others. All are using the mysql-server-5.0.45-7.el5.x86_64 The ones that work, when you connect with a client respond with server version 5.0.45-log source distribution The ones that don't work respond with 5.0.45 source distribution
It's unclear what the differences are between the two source versions and how we wind up with two different versions. One thing that might be involved, the mysql package is installed with both the i386 and x86_64
I've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.