not blocking sites
Code:
dbhome /var/lib/squidguard/db
logdir /var/log/squid
dest block {
domainlist block/domains
[Code]....
under db I created a directory block where I created a domain file and a urls file dosen't seem to be working
All i'd like to split my squidGuard.conf into 3 differents config files. The idea is that, I want 1 config file for src definition (my users), 1 config file for dest definition and 1 file for acl definition. And all of these files will be include in squidGuard.conf.
View 1 Replies View RelatedI need to block some of my sites with SQUID Proxy. I added following lines to my SQUID configuration file but still the site remains unblocked.How to block it?acl blocksites url_regex yahoohttp_access deny blocksitesI have also tried saving some url & filter content in a file and edited configuration as follows,acl blocksites url_regex "/etc/squid/squid-block.acl"http_access deny blocksitesThe squid-block.acl file contents are.cricinfo.commp3
View 2 Replies View RelatedI need to block some of my sites with SQUID Proxy. I added following lines to my SQUID configuration file but still the site remains unblocked.How to block it?
acl blocksites url_regex yahoo http_access deny blocksites
I have also tried saving some url & filter content in a file and edited configuration as follows,
acl blocksites url_regex "/etc/squid/squid-block.acl" http_access deny blocksites
The squid-block.acl file contents are, .cricinfo.com mp3
I haven't found any updated instructions for adding squidguard to the new squid3 server. I tried following the old instructions for doing this, making changes to the text to point to the new squid3 locations, but this didn't work.
View 2 Replies View RelatedI have a SSH server on Ubuntu 10.04 running behind a NAT. I have done the port-forwarding at the router. However say for example I want to restrict people connecting to the SSH server by country IP's. When I configure ufw with the following rule it still lets the IPs that are restricted through. Any idea why
sudo ufw allow from xxx.xxx.xxx.xxx/24 to any port 2556
So first off, it probably seems this question has been asked thousands of times before. but I did do a search, mostly archived posts that ended up being something other than a true ip blocking of the port. [URL]..
So my port 80 is truly blocked. Ive tried setting up the port forwarding on my router, Ive tried manually allowing all traffic on port 80 through ip tables. Ive even dabbled with setting up something like openDNS to see So far nothing, Im only available on my local network.
There has to be some way to do a redirect though. even something as simple as an htaccess file redirecting [URL].. xxxx (the space is there to avoid my url being interrupted by a smiley
I have Ubuntu Server (x64) installed on my box with Apache2 and Squid. For awahile port 80 (http) was fine, I could update packages and use wget. Then one random day port 80 became blocked for incoming traffic. I couldn't use apt-get and had to change to an ftp mirror to update. Also wget is not working.
View 3 Replies View RelatedWebmin running two websites from one server, i've made a second virtual server for my second site including its own document root with it's own index.html file ,but for some odd reason they both run the same site. And i use a Static ip address.
Sites:
[URL]
I have a home server that I built recently and I have been looking into things I can make it do, and one idea that came up was software to manage incoming calls. The main thing I want is something that can block numbers, but it would also be nice if it could record calls or broadcast the caller id over my wireless network somehow. I've tried Googling around, but I really didn't find much.
View 7 Replies View RelatedI blocked facebook and ..... but if any one change the http with https its open with him how can i mange https like http.
View 9 Replies View RelatedMy IP has been blocked by Composite Blocking List for " IP Address 207 is listed in the CBL. It appears to be infected with a spam sending trojan or proxy. It was last detected at 2011-01-02 11:00 GMT (+/- 30 minutes), approximately 1 days, 3 hours, 29 minutes ago. It has been relisted following a previous removal at 2010-12-30 17:15 GMT (3 days, 21 hours, 2 minutes ago)"
How do I find this "trojan" and remove it???? I have a network of 6 computers right now, 5 are running Ubuntu (3 server and 2 Desktop versions) and one windows computer. I have run a virus scan in the windows computer and found nothing. How can I scan a linux computer for a virus?
In the past week or so I've noticed some weird network behaviour. I find accessing some sites such as Amazon, Paypal, and Bigstockphoto really slow. Sometimes the page will not load at all. Other sites are fine. The problem sites are not a problem for others on my LAN at home. When I try to open the problem sites, I can see in Firestarter blocked connections coming from 2.1(8/9).xxx.xxx on various ports such as 36007. This only happens for the problem sites. I attached a typical output from firestarter.
This happens with Firfeox or Chrome. Using Ubuntu 10.10
So I am trying to add some sites to my server, right now I have an active site at www2.site.tld. As a test, I copied [URL]to [URL], and changed only the line
ServerName www2.site.tld
to
ServerName what.site.tld
as well as renaming the lines for the log files appropriately then
# a2ensite what.site.tld
# /etc/init.d/apache2 restart
which by everything I have read should result in what.site.tld being identical to www.site.tld. Instead, it flat-out does not resolve. Apache does create some blank log files in /var/www/
how is it possible to serve multiple sites hosted in my computer with apache through dyndns.I am using ubuntu 10.04 and i had setup a dyndns domain as of mydomain.homelinux.org/127.0.1.1 medic. Now when i go to mydomain. homelinux.org outside of my lan i see the default site of apache.
View 3 Replies View RelatedWhat I want to do now is make nicmatthew.co.cc point to /var/www/nicmatthew/html and make rielworld.co.cc point to /var/www/jimriel/html. I have created the apache vHosts nicmatthew.co.cc and rielworld.co.cc containing this:
Code:
<VirtualHost 67.23.224.90:80>
ServerName nicmatthew.co.cc
ServerAlias nicmatthew.co.cc
ServerAdmin nmatthew@nicmatthew.co.cc
[Code]...
So now I would like to know how to make rielworld.co.cc and nicmatthew.co.cc point to the correct places. Do I somehow set up nameservers? Do I make an A record?
Recently I've been earning money doing web development, php, html/css, MySQL and so on. What I have encountered a lot are clients that need a complete solution. They need their site built, but they also need a hosting solution. I've sent more than just a few clients off to GoDaddy, and quite frankly, I'd like to cash in on some of that.
It would do wonders for my business if I could offer them a hosting solution with full support on top of building their site. My problem is I have no idea how to do this. So I'd like to know how I can host multiple sites on the same server. Does anyone know of a nice guide I can follow to set this up? It's really important that I can add sites fairly easily over the internet. Since I will be away at school, I won't have direct access to the server
My Squid is working. But I do not know how to unblock a proxy for two users on my network. My configuration
Code:
acl work src 192.168.16.0/24
acl sites dstdomain "/etc/squid/sites.acl"
acl files urlpath_regex "/etc/squid/files.acl"
acl boss src 192.168.16.12
[Code]....
How to enable blocked sites and files for boss and it_user?
For system calls, is blocking or non-blocking default in C? Simple question, just am not seeing the answer super quickly.
View 4 Replies View RelatedI installed Apache2 and I added a second virtual host, now can i separate the 2 hosts and let them access 2 different internal test sites? For Example lets say"
User1 uses one IP
User2 uses second IP
How can I separate it in Apache2 and in the /var/www ?
I have a device that is working on modbus protocol andI have written a small program(with block TCP read method ) to read its registers via modbus protocol.my program is working very well but except those times that I unplug the Ethernet cable or turning off the modbus gateway during programs work.at this time my program stops on recv system call (if it reach this system call exacly when I unplug Ethernet cable or turning off the modbus gateway during programs work).I changed my source to work in nonblock TCP method, at this time with the same situation my program does not stop/block on recv system call but after pluging back the Ethernet cable or resuming the connectivity situation back it reads data incorrectly .this is my code:Quote:
#define DEBUG
#include <fcntl.h>
#include <string.h>
[code]...
I have some problem in apache2 configuration. I have two websites on same IP on LAN.i.e. 192.168.1.5
[Code]...
What should I check in a few blogs I checked they said to mention in [URL]...But in this case what should I put I have two different websites or what other thing I have missed? I do not have access to DNS so that on LAN I can point site1.abc.com and abc.com to same IP 192.168.1.5 which to me seems could resolve the issue.
I have a ubuntu 11.04 LAMP server at home.
Its runnign a few small sites on a drupal CMS.
This morning I found none of the sites were responding. The server itself sounded like it was thrashing the hard drive.
It wasnt responding to the FTP client or SSH connections. Web pages just sat there like they were loading very slowly but never actually loaded.
How can I find out what went wrong. I dont have a massive amount of experience with linux, particularly the server variant.
Its worried me a little that the drupal report shows several page not found errors like someone (a bot maybe) was trying to see what php setup files they could access.
Does anyone know of a tutorial or site where I can learn how to monitor what sites people have been accessing on a network?
View 1 Replies View Relatedi have a question about rpm.pbone.net, www.rpmseek.com and these kind of pages: Can I trust these sites and is it secure to install rpms from these sites on enterprise workstations and servers?
View 1 Replies View Relatedi installed phpmysql on F12 and it keeps prompting me for a user name and password. i tried login in with my root password but it does not permit me. How do i bypass this please. Also Aache wont let me view other locally hosted sites on my derver directory. restricts my permission.
View 1 Replies View RelatedI have installed squid 2.7 and squidguard from OpenSuse repositories,and I use "redirect_program /usr/sbin/squidGuard -c /etc/squidguard.conf -d" in /etc/squid/squid.conf,but seems that the squidguard is not started after restart squid,
however,when I initialize the blacklist by "squidguard -C all",the cursor keeps blinking for quite a long time,what should I do
I'm trying to install squidGuard-1.4, I have a minimal install. I have installed squid-3.2.0.5 without any problems, but squidGuard is driving me crazy
I can run the ./configure with no problems but when I run make, or make install I keep getting this error:
Code:
make: *** [y.tab.c] Error 141
And that is is all, no more verbosity or anything else.
Error suggests that YACC is missing but bison is present, also db4 (tried with db44 and db3, same story).
Just in case you can see anything I cannot I've attached the config.log
I am using squid as a proxy server in my cent os 5 machine. I have downloaded and install squidGuard-1.4 using ./configure which it successfully do.THe problem is when I use make command it give me an error beacuse may it it is not compatible with BerkeleyDB. For
Code:
[root@localhost squidGuard-1.4]# make
making all in squidGuard-1.4
make[1]: Entering directory `/home/squidGuard-1.4/src'
[code]....
I am sure that it is due to patch missing .For that purpose I have download the patch "squidGuard-1.4-patch-20091015" and then extraxt it (untar) it. THe patch shows only these two files
Code:
[root@localhost squidGuard-1.4-patch-20091015]# ls
Readme.Patch-20091015 sgLog.c
I does not know how to apply the patch with currect squidGuard ?
I use CentOS 5.4, Squid version 2.6 , squidGuard version 1.2. Squid works properly, squidGuard also works properli. I want to redirect all requirests from [URL] to [URL]. It seems that squidguard works:
Code:
[root@main ~]# echo "http://www.sex.com 127.0.0.1/ - - GET" | squidguard -c /etc/squid/squidguard.conf
http://www.infoborder.com 127.0.0.1/- - -
[root@main ~]#
But if I want to access site [URL] with a browser which is connected to squid, my browser get me the site [URL]