when installing mysql-server by this command sudo apt-get install mysql-server. Installaton is complete but i cant get a my.cnf file. Can anyone tell, what is the mistake i did and how to overcome from this error. Here, i am posting the results
sam-osm@dhcppc4:~$ sudo nano /etc/mysql/
conf.d/ debian.cnf
We have been struggling with a problem with the mysql-server package. This might be in the wrong category because our problems are with it on x86_64. Where the problem happens variables that should populate from the my.cnf don't, on other servers, they do, the my.cnf files are identical except for the server-id
The problem occurs on some of our machines but not others. All are using the mysql-server-5.0.45-7.el5.x86_64 The ones that work, when you connect with a client respond with server version 5.0.45-log source distribution The ones that don't work respond with 5.0.45 source distribution
It's unclear what the differences are between the two source versions and how we wind up with two different versions. One thing that might be involved, the mysql package is installed with both the i386 and x86_64
We have 2 servers, 1 is the webserver and the other is the Mysql server.
When transfering a 2GB file from the webserver to the Mysql server.
The webserver's connection to the mysql DB server dies completely.
Need to restart the MYSQL process in order for it to come back online.
During this connection downtime, when using phpmyadmin on the mysql server shows no problem running queries etc.
it may be a simple doubt i have but i really want to know this,in the httpd.conf file under the server root of apache server.they have instructed not to add a slash at the end when mentioning or giving the path for server root.I think both will still remain the same, then y is that mentioned that way?
View 6 Replies View Relatedi need to config the file using the shell scripts..
i have set the static ip using shell scripts
1st it should ask the ip values 2nd it should check the file is exist or not 3rd then add the values or re edit previous values
i need to set only IP static
I'm running a linux cloud server with the following config
1.2ghz Processor allocation
752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
Httpd.conf
Timeout 20
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
code....
In my company have proxy server using Linux.
Ip Address Proxy Server 1 is: 123.16.201.23
Ip Address Proxy Server 2 is: 123.16.201.24
Every Client: 123.16.3.25,....
and 123.16.4.25,.....
....
- I want export config file on Proxy Server, but i don't know command and i see interface is command line. So hepl me command line and send file to my email.
- In config file on Proxy Server may be disconnect internet for user and Enable coonect internet for user. Hepl me do this?
- I using Ubuntu 10.04LST i want connect file Server on Server ( using WinServer2003).
I just go to company so i have everything don't know system.
I am trying to change the configuration of sendmail so that I can relay mail through google smtp server as suggested here.
First I ran 'm4 sendmail,mc > sendmail.cf' with the original .mc file that came with Fedora 10. There was no error.
I added the following lines.
Quote:
TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
FEATURE(`authinfo','hash /etc/mail/auth/client-info.db')dnl
define(`SMART_HOST',`smtp.gmail.com')dnl
define(`RELAY_MAILER_ARGS�, `TCP $h 587′)
define(`ESMTP_MAILER_ARGS�, `TCP $h 587′)
I ran ''m4 sendmail,mc > sendmail.cf' again and got this message:
Quote:
m4:/usr/share/sendmail-cf/mailer/procmail.m4:33: ERROR: end of file in argument list
I did not change anything in the procmail.m4 file. What do you think caused this error?
I'm using RHEL 5.4 and trying to use the system-config-kickstart to generate a ks.cfg file with all the settings already appeneded. After running the "system-config-kickstart --generate ks.cfg" command, the file gets created but it's missing the firewall configuration, partition information and so on.
How can these settings also be generated with the system-config-kickstart?
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
I'm building a new file/media server for my household to use, and would like to hear the experiences of others, and suggestions, or links to appropriate howto's. I'll be using two (2) 250 GB Western Digital RE4 drives mirrored via mdadm RAID 1 for the Operating System. The storage area will be handled by four (4) 500 GB Western Digital RE4 drives in a RAID 5 array, managed by an Areca 1210 controller.
What I'd like to configure is a basic Samba file server, on which we have individual user folders, and a shared drive. As well, I'd like to add the ability to manage our movie collection so it can be accessed by the Boxee Box attached to the television. Twonky looks promising (and I don't mind paying the $19.95 for something that works well). However, as this is new to me, there may be other solutions out there that are better, and easier to administer. Moving forward, I'd like to explore the feasibility of configuring LDAP on this machine to authenticate users on the network (perhaps even integrate the mail server somehow), and the remote users (only two) who VPN into the network using the pfSense firewall appliance. There are no Windows servers, so Active Directory is not a factor.
I installed mysql on Debian upon restarting the mysql
I got following error
Code:
# /etc/init.d/mysql start
Starting MySQL database server: mysqld.
Checking for corrupt, not cleanly closed and upgrade needing tables..
ERROR 126 (HY000) at line 1: Incorrect key file for table '/tmp/#sql_138e_0.MYI'; try to repair it
i am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
I have a recent install of Fedora14, and wanted to have outbound email sent to a smtp server elsewhere on the local network. I found the System->Preferences->Email Settings app and created a mail account with an smtp server. Now I am able to use mailx, mutt, and sendmail -- all send email correctly to the external server.
But I don't like being reliant on the GUI apps and wanted to know how this was done -- what system config files were affected. Assuming that my "smtp.xxx.com" server should show up somewhere, I grepped /home, /etc, and /var, but can't find it anywhere. On a whim I went into Evolution, deleted the mail account, and rebooted, but email STILL works. Where is this configured?
[Code]...
i am having a problem while hosting a website on rhel apache server.when i write the url on browser than its doesnt show any page ,neither it displays any error.However when i am hosting a simple php webpage apart from that website its works fine.i also want to know how can i import a databe file in mysql which is a part of that website.
View 3 Replies View RelatedI am trying to read a file uploaded by a simple <input type="file"> form and directly write it to a mysql blob - without saving it to the filesystem.
I tryed something like:
Code:
It writes some few Bytes to the DB and there is no error, but it's not the actual file that is being written.
I am using CentOS5 and installed the MySQL for server during the installation. I can set up and use MySQL databases. But I cannot make it startup everytime the server restarts. And quite a lot of methods need this folder "support-files/mysql.server", while my set up cannot find this. I am wondering if my installation of the MySQL for server is complete or not.
View 4 Replies View RelatedI was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config
[Code]...
I try to config my apache server to list all my files: c/c++, php, java files, like the txt file on my server,
e.g /var/www/mydomain/pub
i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name,
if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file,
Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
config my apache server to list all my files: c/c++, php, java files, like the txt file on my server, e.g /var/www/mydomain/pub i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name, if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file, Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
View 1 Replies View RelatedI'm working on a side project where I would like to install three ubuntu server systems,each with only one task.So server0 would be the apache server, server1 would be the database and server2 would be the file server.which key terms I should be researching?
View 9 Replies View RelatedWhen i load the local .csv file into mysql server the date format varies.Its mis matching.How to solve and match this.
View 1 Replies View RelatedI would like to setup 2 linux machine each with two ethernet cards, and need to connect to two subnet e.g. 192.168.*.* and 10.0.*.* . If one linux machine out of order, the other will take over all the services(1 httpd and two named(192.168.*.1 and 10.0.0.1 as server ip). What network config is best and easy to failover to other machine?
View 1 Replies View RelatedI installed a server called Oracle VM Manager, which is actually a web based application to manage Oracle VM server.After successfully installed everything, it suppose to be access by browser using But strange thing is, I can see web pages from the server itself with but any other machines to access it with hostname or ip address all failed.
View 2 Replies View RelatedI have setupped the PPTP, but failed the config it. My local mechine's IP is dynamic.
IP=66.96.223, user=root pass=nJAG1kK1Tp
I'm presently writing software to keep my system time from drifting, it uses an external clock device.To verify it's accuracy I'm running ntpd as a server, and have another server monior the first as a client. This allows me to compare the offset with other 'valid' time servers.The problem is that the monitoring client keeps synchronising with my development server. How can I configure either the dev. server or the client so that it's time won't be selected as a good time source?The ntp.conf on the dev. server looks like:
Code:
server 127.127.1.0 # local clock
fudge 127.127.1.0 stratum 10
[code]...
I have a Bind DNS caching-only server setup that is working. I am bringing up a new AD domain controller that will also be a DNS server for that AD but I don't want it responding to any DNS queries except those that are AD related.So, my goal is to leave this caching server as the primary DNS server for stations on the network and have it forward requests for the AD domain to the domain controller.My understanding is that I just need a forward zone for that domain pointing to the domain controller. However it does not seem to be working.So that leaves me to think that my caching server is not forwarding properly.
For example, this AD is going to have a naming convention of hostname.mydomain.local.If I do an nslookup and specify the domain controller's IP address as the server, I can query addresses that exist in DNS on that server, such as dc1.mydomain.local.However, queries to my caching server times out (I get a response from the caching server if I query mydomain.local but none of the objects in that domain) Here is my named.conf file:
options {
directory "/var/named";
listen-on { 192.168.0.14; 127.0.0.1; };
[code]....
Im getting this error when i try to run mysql from a shell
Code:
ERROR 2002 (HY0000): can't connect to local MySQL server through socket
I have installed MySQL over yum on fedora.
but the path and file /var/lib/mysql/mysql.sock does not exist on my system?
I've tried /etc/init.d/mysql start, and it actually starts, or at least, it doesn't error out. But when I do pgrep mysql I get nothing, and when I try to login with mysql -p as root, I get
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
None of my other logins work, either, but since pgrep mysql didn't work, it's clear that MySQL just isn't running. I tried uninstalling and reinstalling mysql-server via apt-get, but I get the same thing. The logs in /var/log/syslog show this:
Apr 11 14:31:26 /etc/init.d/mysql[9774]: #007/usr/bin/mysqladmin: connect to server at 'localhost' failed
Apr 11 14:31:26 /etc/init.d/mysql[9774]: error: 'Can't connect to local MySQL server
[code].....
Scenario:A - Local Unix machineB - socks proxy server port 1080C - remote mysql server port 3306I want to connect to the remote mysql server(C) from local unix machine(A) using sock proxy(B).
View 1 Replies View Related