I have a setup of squid3 with ntlm authen and I use squidGuard 1.5 to filter my web traffic. My squid3 is authenticating users properly and parsing all rules. The problem is with squidguard which doesn't seem to filter out users. below is my squidguard config.
Code:
dbhome /usr/local/squidGuard/db
logdir /usr/local/squidGuard/log
[code]....
All i'd like to split my squidGuard.conf into 3 differents config files. The idea is that, I want 1 config file for src definition (my users), 1 config file for dest definition and 1 file for acl definition. And all of these files will be include in squidGuard.conf.
View 1 Replies View RelatedI am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.
This is the common part:
Code:
AuthType Basic
AuthBasicProvider ldap anon
Order allow,deny
Allow from all
This part by itself works for the LDAP authentication:
Code:
AuthName "System Admins"
AuthLDAPURL "ldaps://example.com/ou=ldap,o=example.com?mail" SSL
Require ldap-group cn=SysAdmins,ou=memberlist,ou=groups,o=example.com
This part works by itself for guest access:
Code:
Anonymous guest
Anonymous_VerifyEmail Off
Anonymous_MustGiveEmail Off
Anonymous_LogEmail on
Require valid-user
But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?
I'm having a problem with squidguard filter with AD authentication. I have downloaded the latest stable source package from squidguard site and I followed the instructions for the ldap(AD) authentication but it does not work at all.I have googled and tried everything but no luck. (first 30 hits on google) Anyway this is the LDAP auth part: http://www.squidguard.org/Doc/authentication.html at squidguard and this is how to build the package.
View 2 Replies View RelatedIn the past I found some great help on this forum, so here goes. Bare with me because it's a long story. I'll try to be as complete as possible. I've installed and configured OpenLdap on a virtual machine with ip 192.168.39.134. I've added 2 users via LAM. In the ou WikiUsers and the domain is wiki.local.
I've then created another host with ip 192.168.39.133 with mediawiki installed on it. Then I added the extension LDAPAuthenthication. In the LdapAuthentication file I added this code (only the last paragraph is mine, I added the others to show it's location in the script):
Quote:
$path = array( $IP, "$IP/includes", "$IP/languages" );
set_include_path( implode( PATH_SEPARATOR, $path ) . PATH_SEPARATOR . get_include_path() );
[code]...
I know I'm close because I can't register any new users or accounts on the mediawiki site. Although I could before I added the LDAP service. This is indeed all just to test and get to know how LDAP works. That's why it's all virtual in VMWare. I did not really configure anything on the LDAP, i just installed it and chose a domain (wiki.local).
Filter access server through the net only to authenticated users from domain controller (Win2k). Server (Centos)(Firewall with 2 nic), which makes access to the net, with only 196MB RAM (PIII500Mhz), so I do not want a solution based on proxy or what resources it uses large I want a solution with a script that runs at login on windows this check series HDD and to communicate with Linux server that's open accessor another simple solutionNow just use only MAC filtering on
View 1 Replies View Relatedhow to add users to groups with ldap? Further, could someone point me towards some good command-line management tools? Creating each dn manually is going to get old real fast...
View 14 Replies View RelatedI have configured ldap on Debian5 and samba on another machine, all servers are running ok, but when i try to add users, it gives me an errror that "unknown user"
View 4 Replies View Related"Merging" may not be quite the right word but that is the desired end result.
Scenario: many Solaris 10 servers, each with various local users. We want to set up LDAP for all for all of them. LDAP server is set up, procedure for getting other servers to use it for user authentication is documented and tested. The question is how to handle users that are in LDAP who also exist as a local user on a given machine.
It appears that the usernames on both sides follow a convention and therefore match but obviously the userids will not match. Local user joe has userid 1234, LDAP user joe has userid 56789.
The way I see it we'll have to:
1. move local user joe's home directory to the path that LDAP user joe will want
2. change local user joe's userid to that of LDAP user joe
3. change joe's files' owner to his new userid
4. remove local user joe
5. finally configure LDAP
Is this a rational procedure? Is there a more effective method? I'm not looking forward to this as there are many servers and each of them have a different set of local users, each with different userids which will have to be handled manually and individually therefore not even scriptable much.
I did useradd -g users ldaptest and tried logging in remotely but the client always says no such user. what do I have to do to update the users that LDAP sees?
View 2 Replies View RelatedI currently have an LDAP database on my Suse 10.2 server for managing authentication and controlling emails for my Cyrus email server. I use this setup to provide email functionality to my web and email hosting clients, as well as DNS functionality, and it uses the default LDAP database that was setup when OpenLDAP was initially configured. Email support is working wonderfully, I might add. I also tested and verified the use of an email lookup directory in two different email clients (Outlook and Evolution) so that I can tell one of my clients how to lookup the email address of users who are setup in the LDAP server, and it works beautifully.
However, I'd also like to be able to allow my clients to build a shared contact database that can also be used in their email clients so that they can share them among all of their users. Ideally, I would need to be able to allow each client to have their own database of shared contacts, and I assume this would be done by creating a new LDAP database for each client company (i.e. group of users) that can contain the list of shared contacts for any of that client's users. When they configure their email client directory settings, they would enter the base path to their database in order to retrieve their shared contact database entries.
In my web searches, I've found plenty of CRM solutions on the web that claim to provide this type of functionality, but I believe that OpenLDAP contains everything I need to make this work without adding another layer of software to the server solution. (I subscribe to the "Keep it Simple, Stupid!" approach whenever possible.) Essentially, I need to have People entries in a client's LDAP database that are NOT email users on the system. The fields in the standard people schema are all the fields they would need - as long as I can figure out how best to add these non-user entries in the LDAP database. Are there any potential difficulties in creating additional LDAP databases expressly for this purpose?
Are there any tricks to adding contact entries into a client's LDAP database without them also being current email users on the server, so that those entries can be retrieved through an Email Client directory lookup? I will also want to provide an easy method for my client users to add new entries to their LDAP contact database, most likely through a web interface for them that could then issue LDAP commands on the server based on the input fields for the new contact. (I don't believe this is possible from within the email client itself.) Is there any reason this could not be done with the proper configuration? What should I be aware of as I setup this contact management web interface? Is there a better way for non-technical client users to manage this list of shared contacts?
I installed and configured LDAP server and client on RHEL5 successfully. Problem is that when I add more than one user on server and clients, It shows error 'invalid user'.When I run the command:-#chown -R user:users /home/user, It shows error 'invalid user'. by step for adding and modifying more users in ldap servers.
View 1 Replies View RelatedHow to disable the LDAP Users automatically with the specified time duration. For this any configuration file required or else a script need to be written.
View 1 Replies View RelatedI've compiled openssh-5.4p1 on RHEL 4.8 with Openssl 0.9.8m + pam It works perfect without pam (pam-0.77-66), both with password and public key auth. Whith pam enabled and LDAP (openldap-2.4.21, from scratch) something strange happens: system users: I can do ssh with both password and public key LDAP users: public key works for remote users, still I cannot do ssh with just password. I'm trying a custom PAM configuration, because the default one (even with authconfig + LDAP ) blocks ssh even with system users.
My pam SSHD configuration is:
#%PAM-1.0
auth required pam_env.so
auth sufficient pam_unix.so likeauth nullok
auth sufficient pam_ldap.so use_first_pass
[code]....
My LDAP users are ok: i can do "su - " remote LDAP (so that nss_ldap is OK), also getent passwd and getent group is ok.
In researching current ldap issue (not being able to do anything but log in) it seems that there are no concepts of privileges, roles, etc. that could be assigned to a user in LDAP.
I've only seen fields that deal with name, organization, etc., not with application-specific access control.
I have to assign certain access privileges to users authenticated via LDAP server based on the privilege level mentoned in the LDAP server. How to attain this.
I know of /etc/security/limits.conf and that can be used to limit all sorts of good things, but I haven't found anything that talks about using this when the users come from LDAP. Would I be able to do something like
@"Domain Users" soft nproc 25
@"Domain Users" hard nproc 40
where Domain Users is the group all users belong to in our system.
So, I have mail server ( posfix ) and ldap server, they works fine. I can add/delete users from posfix, and they can send / receive mails to/from any address. At same time my ldap server works fine, I have also users in it, my "simple" question would be...if I have user "test1" in ldap, what I have to do to connect--enable that user to send mails ?
View 1 Replies View RelatedI`am just trying to connect Samba with ldap to make it simpler for the users to log in. We have already attached squid, so by that we thought it would be easy to do the same with samba. I think we did something wrong with the ldap config for the os with is btw:
Quote:
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 1
We added
Quote:
ldap admin dn = cn=xxx,o=xxx
[Code]...
I am trying to deploy Kerberos and LDAP so users will be able to login in to a server on the edge of the LAN, and afterwards be able to establish a SSH connection to all the computers in that LAN without the need to type any passwords, and without the need for me to manage SSH keys [beside the SSH keys on the login server] and local user accounts.
1. When i create the users in OpenLDAP i use a template that i created by reading documentation from the Internet. In the template one piece of information that is neede is the UID. Is there any clever way the keep track of the numbers so i do not assign the same UID to two users, besides using a pen and paper?
2. For the users to be able to establish SSH connections between the computers, the host is going to be added to the keytab like this: ktadd host/client.example.com Is is possible to replace client with something genric so i do not need to mange these keytab files between the hosts?
3. Users will be logging on the the server on the edge of LAN by using SSH keys. How can i configure the setup so the users will recieve a ticket automatically when the logon without executing kinit and without entering a password, just by having a valid SSH key?
4. krb5kdc is running on all the network interfaces in the server i want it to only run on eth1, how can this be done?
I am looking for ideas for getting windows users into an ldap server. I am currently running a Linux server for my department and need to create an LDAP server which mirrors the username/password information for all of us as they are stored in the windows server here. I have the openldap server up and running on Ubuntu 8.04 and it works great; I now need to find some way to import user info into this from windows. I've seen discussions of using ldifde.exe to export the AD users into an ldif file. Is this the simplest way to go about it?
Our Linux server is currently providing us with much needed services using apache, and apache is authenticating using LDAP to our windows server (Using our windows username / password is required functionality). This windows server has some problem which causes it to delay for inordinate amounts of time between authentication requests and responses. The situation is such that this problem will not be addressed by IT staff. However, I have control over the Linux server so I am looking to just mirror the windows server on an LDAP server of my own. I could get away with updating the passwords in the Linux server.
Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
we have a weird problem with our opensuse 11.2 server installation.
We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.
This indeed already worked weeks ago until....this week.
Maybe some updates??!
I do not know what happend exactly. The server just does not want to start again and throws following error:
Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed
This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.
So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.
I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).
I use CentOS 5.4, Squid version 2.6 , squidGuard version 1.2. Squid works properly, squidGuard also works properli. I want to redirect all requirests from [URL] to [URL]. It seems that squidguard works:
Code:
[root@main ~]# echo "http://www.sex.com 127.0.0.1/ - - GET" | squidguard -c /etc/squid/squidguard.conf
http://www.infoborder.com 127.0.0.1/- - -
[root@main ~]#
But if I want to access site [URL] with a browser which is connected to squid, my browser get me the site [URL]
I'm using ubuntu server 10.04 with openvpn installed on it. My vpn is working fine, all the users can connect without any issue.My problem is that I'm unable to filter the VPN traffic using openvpn. I can't allow all users to be able to interact with other vpn users. I need to avoid this kind of traffic.I was trying to build an iptables firewall, but I just noticed that my openvpn traffic isn't being filtered by iptables.In FORWARD chain, no matter what rule I use openvpn would continue to allow traffic between my clients. It does appear that openvpn is skipping FORWARD chain?For example:
Code:
# iptables -L FORWARD -nv
Chain FORWARD (policy DROP 0 packets, 0 bytes)
[code]....
i have configured ldapserver on rhel4 for creating address book
following are configuration files on ldap server
/etc/openldap/slapd.conf
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
i am able to import this ldif file into database.also when i perform the ldapsearch on this server with command"ldapsearch �x �W �D �cn=manager, dc=example, dc =com� �b �dc=example, dc=com�" i get correct output.
but when i am trying to search from another client machine, i am getting "error ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)"
also when i configured address book on mozilla on server., it is working fine.but not working on another machine.is any configuration is missing on client machine.both ldap server and client are configured on rhel4es without any firewall or selinux.
i have successful secure ldap replication but i could not make ldap client to direct its authentication to slave ldap
here is my config file on ldap client (i am not sure if it is the right place though)
ip : 192.168.1.183 is master ldap
ip : 192.168.1.185 is slave ldap
pico /etc/ldap/ldap.conf
#
# LDAP Defaults
code....
I'm trying to set up a Linux server and I am new to this. I have gone through most of the configuration using SAMBA 3.0 and when I populate the ldap directory all I get this error before the password request:
Then when I perform an ldapsearch to see if the directory is populated I get this message:
I'm positive all my .conf files are done right.
I'm checking with a sniffer and there's activity going on between the client and the LDAP server... as a matter of fact, the sniffer shows that the search is producing one ldap item, however, php says it can't contact the ldap server (after it has bound and everything):
The script is working beautifully on another host with debian.
Now I have my ldap server doing authentication and providing autofs maps perfectly the next question ... is there a utility anywhere that will allow me to stuff 1200 users into the ldap server from a csv file
View 4 Replies View RelatedI have an Openldap server and many 9.10 servers using it to check for possible ssh users. No problems there. Just brought up my first 10.04 server and went through the same procedure to allow ldap users to ssh in, works great. The problem is that ldap users cannot su to root on the 10.04 server. Only locally defined users can su to root, though they cannot su to ldap users. The local root user can su to anyone. Quick overview of how I installed ldap login:
Code:
# apt-get install libnss-ldap
# echo "session required pam_mkhomedir.so skel=/etc/skel/" >> /etc/pam.d/common-session
And added ldap to the end of these lines in /etc/nsswitch.conf:
Code:
passwd: compat ldap
group: compat ldap
shadow: compat ldap
This process has worked without a hitch on 9.10 dozens of times. So my question is, why are ldap and local users now incapable of using su across authentication mechanisms? For reference these are the error messages in /var/log/auth.log when trying to su to root from an ldap user:
Code:
Jun 14 16:17:07 server unix_chkpwd[6560]: check pass; user unknownJun 14 16:17:07 server unix_chkpwd[6560]: password check failed for user (root)
Jun 14 16:17:07 server su[6559]: pam_unix(su:auth): authentication failure; logname=ldapuser uid=2000 euid=2000 tty=/dev/pts/5 ruser=ldapuser rhost= user=root
Jun 14 16:17:09 server su[6559]: pam_authenticate: Authentication failure
Jun 14 16:17:09 server su[6559]: FAILED su for root by ldapuser
And the auth.log for trying to su to an ldap user from a local one:
Code:
Jun 14 17:18:18 server su[8473]: pam_unix(su:auth): authentication failure; logname=localuser uid=1000 euid=1000 tty=/dev/pts/0 ruser=localuser rhost= user=ldapuser
Jun 14 17:18:18 server su[8473]: Successful su for ldapuser by localuserJun 14 17:18:18 server su[8473]: + /dev/pts/0 localuser:ldapuser
Jun 14 17:18:18 server su[8473]: bad group ID `2000' for user `ldapuser': Operation not permitted