I have installed squid 2.7 and squidguard from OpenSuse repositories,and I use "redirect_program /usr/sbin/squidGuard -c /etc/squidguard.conf -d" in /etc/squid/squid.conf,but seems that the squidguard is not started after restart squid,
however,when I initialize the blacklist by "squidguard -C all",the cursor keeps blinking for quite a long time,what should I do
I use CentOS 5.4, Squid version 2.6 , squidGuard version 1.2. Squid works properly, squidGuard also works properli. I want to redirect all requirests from [URL] to [URL]. It seems that squidguard works:
Code:
[root@main ~]# echo "http://www.sex.com 127.0.0.1/ - - GET" | squidguard -c /etc/squid/squidguard.conf
http://www.infoborder.com 127.0.0.1/- - -
[root@main ~]#
But if I want to access site [URL] with a browser which is connected to squid, my browser get me the site [URL]
All i'd like to split my squidGuard.conf into 3 differents config files. The idea is that, I want 1 config file for src definition (my users), 1 config file for dest definition and 1 file for acl definition. And all of these files will be include in squidGuard.conf.
View 1 Replies View RelatedI have just installed squid and sarg, both are working well. I cannot get squid to start when the machine boots. I installed webmin and configured the setup through the webmin interface where I checked the "start at boot option". I think the problem is that my network card responsible for the web connection is wireless so when squid tries to load during boot it is trying before the Wireless card is up and so it fails. I have tried multiple methods of adding a script to the "dispatcher.d" folder in "NetworkManager" to load squid after wlan0 is up but all have failed to bring up the squid proxy without my interaction. I have not found any two sites that describe the syntax for "dispatcher.d" alike so I may have the command wrong but I have no what to do.
View 9 Replies View RelatedAfter upgrade to 10.04 squid does not start automatically after boot.
Starting it manually via: sudo start squid works fine.
I am running fedora 10 and webmin squid proxy server, after power failure the squid fails to start. i have tried to start it from command line but failed
[root@ ~]# /etc/init.d/squid start
Starting squid: .................... [FAILED]
[root@ ~]# /etc/init.d/squid reload
[code]...
I am running fedora 10 and webmin squid proxy server, after power failure the squid fails to start. i have tried to start it from command line but failed
[root@ ~]# /etc/init.d/squid start
Starting squid: .................... [FAILED]
[root@ ~]# /etc/init.d/squid reload
[code]....
I have installed squid 2.7 in my red hat Linux box.I need some guidance regarding to start and stop squid service. Normally when squid configuration file is n /etc/squid/squid.conf and we want to start the service we use # service squid startand to stop the service we use# service squid stopNow squid is inCode:# /usr/local/squid/etc/squid.confhere the default # service squid start and # service squid stop does not work.
View 6 Replies View RelatedSquid gives the follwoing error messages when i attepmt to start it:Sep 10 12:33:24 localhost (squid): Cannot open '/var/log/squid/access.log' for writing. The parent directory must be writeable by the user 'squid', which is the cache_effective_user set in squid.conf.Sep 10 12:33:24 localhost squid[3423]: Squid Parent: child process 3446 started
View 3 Replies View RelatedWhen ever I reboot my server I always turn on the squid service. Is there any way that without giving command
Code:
#service squid start
my squid service should automatically start ?
Im using PHP and Sun Solaris to do something for Squid Proxy Server. im using......
- LAMP / SAMP
- Linux / Solaris 10
- Squid Server
- PHP
actually i need to know that someone knows about how to start/stop Squid Service using PHP code.
I am on Ubuntu 10.04, running Squid 2.7.STABLE7 Squid refuses to start on my machine unless I give it the -D argument (disable initial DNS tests). I think this is because my machine is offline while I'm testing it, so no DNS server. how to set Upstart to start Squid with the -D argument?
View 2 Replies View RelatedI'm trying to install squidGuard-1.4, I have a minimal install. I have installed squid-3.2.0.5 without any problems, but squidGuard is driving me crazy
I can run the ./configure with no problems but when I run make, or make install I keep getting this error:
Code:
make: *** [y.tab.c] Error 141
And that is is all, no more verbosity or anything else.
Error suggests that YACC is missing but bison is present, also db4 (tried with db44 and db3, same story).
Just in case you can see anything I cannot I've attached the config.log
I haven't found any updated instructions for adding squidguard to the new squid3 server. I tried following the old instructions for doing this, making changes to the text to point to the new squid3 locations, but this didn't work.
View 2 Replies View Relatednot blocking sites
Code:
dbhome /var/lib/squidguard/db
logdir /var/log/squid
dest block {
domainlist block/domains
[Code]....
under db I created a directory block where I created a domain file and a urls file dosen't seem to be working
I am using squid as a proxy server in my cent os 5 machine. I have downloaded and install squidGuard-1.4 using ./configure which it successfully do.THe problem is when I use make command it give me an error beacuse may it it is not compatible with BerkeleyDB. For
Code:
[root@localhost squidGuard-1.4]# make
making all in squidGuard-1.4
make[1]: Entering directory `/home/squidGuard-1.4/src'
[code]....
I am sure that it is due to patch missing .For that purpose I have download the patch "squidGuard-1.4-patch-20091015" and then extraxt it (untar) it. THe patch shows only these two files
Code:
[root@localhost squidGuard-1.4-patch-20091015]# ls
Readme.Patch-20091015 sgLog.c
I does not know how to apply the patch with currect squidGuard ?
I am using cent os 5. I want to ask two thing. By default Squid configuration file is place in /etc/squid/squid.conf and if we have downloaded the source code file of squid then it will be installed in /usr/local/squid/etc
when we install squidGuard it automatically installed under /usr/local/squidGuard and then we can see squidGuard.conf file.
The thing which I want to ask that is there any way to change the path of squidGuard to /etc/squid/squidGuard or it is batter to leave the default settings to install it ?
I'm having a problem with squidguard filter with AD authentication. I have downloaded the latest stable source package from squidguard site and I followed the instructions for the ldap(AD) authentication but it does not work at all.I have googled and tried everything but no luck. (first 30 hits on google) Anyway this is the LDAP auth part: http://www.squidguard.org/Doc/authentication.html at squidguard and this is how to build the package.
View 2 Replies View RelatedI have a setup of squid3 with ntlm authen and I use squidGuard 1.5 to filter my web traffic. My squid3 is authenticating users properly and parsing all rules. The problem is with squidguard which doesn't seem to filter out users. below is my squidguard config.
Code:
dbhome /usr/local/squidGuard/db
logdir /usr/local/squidGuard/log
[code]....
I have CentOS 5, squid installed and running (writing this on the proxy) and I have squidGuard running with Shalla's URL black lists
I have:
Now if I visit any of the domains or urls in the blacklist it just lets me go straight through.
I have chown -r the db/* folder...
Cant think of anything that will be stopping me?
I am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.
My squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
View 1 Replies View RelatedI would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedI have installed dansguardian and squid on my home computer and I need to configure them. the only problem I couldn't find any manual only one for opensuse 9. And even there the part after "acl CONNECT method CONNECT" doesn't make any sense to me.
View 1 Replies View Relatedi want to start apache and ktorrent on the systems start up, is there a program that will do it for me or do i need init scripts?
View 2 Replies View RelatedI'm looking to upgrade squid 3.0.x to the latest version 3.1.x. Is there a way of doing it without losing the current configuration ? The installed version was done using the binary package (rpm) and not compiled from a tar package.
View 8 Replies View Related.i need to configure squid in my company how to install and configure squid in my SUSE server...
View 2 Replies View RelatedI live in Taiwan and sometimes need to travel to Mainland China. How can I use a proxy to allow me access to location sensitive content. Ex: Facebook in China, or Pandora outside of the US?
View 2 Replies View RelatedHow to setup squid on opensuse with active directory authenticaton.
View 1 Replies View RelatedI set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....