I am using cent os 5. I want to ask two thing. By default Squid configuration file is place in /etc/squid/squid.conf and if we have downloaded the source code file of squid then it will be installed in /usr/local/squid/etc
when we install squidGuard it automatically installed under /usr/local/squidGuard and then we can see squidGuard.conf file.
The thing which I want to ask that is there any way to change the path of squidGuard to /etc/squid/squidGuard or it is batter to leave the default settings to install it ?
All i'd like to split my squidGuard.conf into 3 differents config files. The idea is that, I want 1 config file for src definition (my users), 1 config file for dest definition and 1 file for acl definition. And all of these files will be include in squidGuard.conf.
I have installed squid 2.7 and squidguard from OpenSuse repositories,and I use "redirect_program /usr/sbin/squidGuard -c /etc/squidguard.conf -d" in /etc/squid/squid.conf,but seems that the squidguard is not started after restart squid, however,when I initialize the blacklist by "squidguard -C all",the cursor keeps blinking for quite a long time,what should I do
I'm trying to install squidGuard-1.4, I have a minimal install. I have installed squid-3.2.0.5 without any problems, but squidGuard is driving me crazy
I can run the ./configure with no problems but when I run make, or make install I keep getting this error:
Code: make: *** [y.tab.c] Error 141 And that is is all, no more verbosity or anything else. Error suggests that YACC is missing but bison is present, also db4 (tried with db44 and db3, same story).
Just in case you can see anything I cannot I've attached the config.log
I haven't found any updated instructions for adding squidguard to the new squid3 server. I tried following the old instructions for doing this, making changes to the text to point to the new squid3 locations, but this didn't work.
I am using squid as a proxy server in my cent os 5 machine. I have downloaded and install squidGuard-1.4 using ./configure which it successfully do.THe problem is when I use make command it give me an error beacuse may it it is not compatible with BerkeleyDB. For
Code:
[root@localhost squidGuard-1.4]# make making all in squidGuard-1.4 make[1]: Entering directory `/home/squidGuard-1.4/src'
[code]....
I am sure that it is due to patch missing .For that purpose I have download the patch "squidGuard-1.4-patch-20091015" and then extraxt it (untar) it. THe patch shows only these two files
Code:
[root@localhost squidGuard-1.4-patch-20091015]# ls Readme.Patch-20091015 sgLog.c
I does not know how to apply the patch with currect squidGuard ?
I use CentOS 5.4, Squid version 2.6 , squidGuard version 1.2. Squid works properly, squidGuard also works properli. I want to redirect all requirests from [URL] to [URL]. It seems that squidguard works:
I'm having a problem with squidguard filter with AD authentication. I have downloaded the latest stable source package from squidguard site and I followed the instructions for the ldap(AD) authentication but it does not work at all.I have googled and tried everything but no luck. (first 30 hits on google) Anyway this is the LDAP auth part: http://www.squidguard.org/Doc/authentication.html at squidguard and this is how to build the package.
I have a setup of squid3 with ntlm authen and I use squidGuard 1.5 to filter my web traffic. My squid3 is authenticating users properly and parsing all rules. The problem is with squidguard which doesn't seem to filter out users. below is my squidguard config.
why both ubuntu and centos 5.4 will only give me 800x600 resolution on my monitor when opensolaris immediately gives me 1280x1024?The first time I tried ubuntu it gave me 1280x1024 and now will only make 800x600...This is a viewsonic VG930M Monitor..
I have a problem with my graphics (exactly this one: [URL] I've got an Intel 845G chipset and a LG Flatron F900P monitor.A friend of mine convinced me to try ubuntu and I installed the 10.10 version. Everything (except the monitor's resolution) works all right.
My computer is: IBM Net Vista 8305-21G Chipset: FRU PN 49P1599 (Intel 845G)
I am trying to install blueman on fedora 12. I am compiling it from source. Because their is no rpm file for this. In configuration their is error
bluez is not find..but I have installed bluez-4.57... Error is:- Consider adjusting PKG_CONFIG_PATH environment variables if you installed software in non standard prefix.. set evn variables BLUEZ_CFLAGS and BLUEZ_LIBS...
How can I set these variables..to get rid of this error. I want to connect to internet through GPRS enabled phone through bluetooth. Any other way to connect to internet through bluetooth. I am using fedora 12.
I have recently installed ubuntu on a Dell Inspiron 8500. It works well but the startup volume on the ubuntu splash screen is extremely loud. How do I adjust this. System volume does not seem to help.
The "Check if already posted" brings up no results. I've installed Ubuntu 11.04 with Wubi on my Window7 Home Premium laptop. No problems, except that I can't find "System" to make adjustments, specifically:
(1) Disable touchpad (it is disabled in Windows7).
(2) The display is only using about two-thirds of the screen (11.6" Samsung X120). In the Windows7 setup I do have the resolution set at 125% because the fonts are terribly small otherwise on this quite high resolution display.
During the installation I was not taken thru settings screens for things like language, video, like I have been on the very rare occasions I've installed a Linux OS onto its own partition, presumably because Ubuntu 11.04 is being installed as part of Windows7.
I'm taking here about tins of directories, thousands of files. I'm looking to find a command that makes me able to move the results above to another path, and to create that path once it doesn't exist like below:
Java applet not loading image with relative path(e.g. images/1.jpg) but loads image with absolute path(i.e. from /root/user/images/1.jpg) . This is a problem when i want to host the applet on web server
I have a program that takes a relative path as input appends it to a some path string to get the actual path.
Now all I can input is the relative path. So if I want to go one level above my input will be ../mypath.
If I know the depth of the path used internally, I can use .. as many times to go to the root directory and then give the absolute path. But suppose I do not know the depth of the directory, can I construct a relative path string such that it considers it as a relative path. One way could be to have enough .. in the path string so that I can force an absolute path for some maximum depth of path.
Is there some path string syntax that I am not aware of but can achieve this?
Experimenting with shell variables, accidentally deleted the path variable how could I return to the original path value. What kinds of problems will I have if I don't have a path variable.
I booted Hardy, because Karmic detects no screen, after trying to adjust to a previously recognized resolution. As good as it is, does it seem like some basic computer functions just do NOT improve?
how to add a path to PATH variable permanently so that it remains persisent even after closing shell and rebooting the system when i added a path, to variable it remained there as long as i didn't closed the shell. but when i reopened it ,changed were undone.
I have a path c:windowsackup I need this string to be changed into /windows/back/up I used the command -bash-3.00$ echo windackup | sed 's/\//g' but the output is windbackup
prefix=user@my-server: find . -depth -type d -name .git -printf '%h�' | while read -d "" path ; do ( cd "$path" || exit $?
[code]....
How shall i go about changing the absolute path to relative path, so that /home/git/mirror/android/adb/ndk.git gets converted to /mirror/android/adb/ndk.git //echo <command> "$prefix$PWD.git" ?? - anything for relative path?
I am trying to figure out how i can add the path /usr/sbin/ into the $PATH variable. I want this to be used from the normal account. I am bored settinh this manualy each time my computer starts.
I have already had Vista installed on another drive and from what i've read on the webs you get to dualboot if you install ubuntu after vista. when i did install it (i installed on a blank hdd with no partitions, choosing the "erase entire disk" option since for some reason default option was attempting to eat a part of my windows 1 gb drive instead of using disk i specially made for it) and the grub 2 loaded for the first time, there was NO option to run vista. only 2 linux (normal and recovery) and 2 memtests. I've ran linux and went to google this. I found that i should add something to some config files in /etc/grub.d/From reading the readme file i understood i could add my own files that are named like NUMBER_SOMENAME and insert code into them. Because it said:Quote: For example, you can add an entry to boot another OS as01_otheros, 11_otheros, etc, depending on the position you want it to occupy inthe menu; and then adjust the default setting via /etc/default/grub. But then i found a file 40_custom that said:
After saving above changes, I enter the command: source ~/.bashrc Now if I do echo $PATH, the path shows both the old PLAY_HOME and new PLAY_HOME. This is really bad and messes up a lot of things in my project. This problem only goes away if I logout or reboot, a rather very long process. What is happening is that the old path is added to new path element and the old path includes the old path element you want to remove.
Does anyone know how to get the path with a inode number by C programming? Or can I get the absolute path without giving a "path" but a inode number by C?
like this: get_path(unsigned inode); not such this function: getcwd(".", xxx); taowuwen@gmail.com
we have installed ubuntuserver10.04 and globus toolkit4.1.2 but when insatll gt4.1.2.using ./configure,we get an error to set java path.the error is JAVA_HOME is not set..to unresolve it we again install the server edition along with all packages.we have set the path for java /usr/bin/java still we get the error.help me out
