Server :: DHCP Server On CentOS 5.5 Not Working - When Connect Any Devices To Eth1 They Don't Get Any IP
Dec 2, 2010
I'm no expert on DHCP. My problem is that i have a CentOS 5.5 server on which i want to install a DHCP server. I have two NICs where eth0 has access to the internet and where eth1 should act as an DHCP server.
I have installed dhcpd and this is how my dhcpd.conf file looks like.
Code:
ifconfig looks like this
Code:
When i start dhcpd on eth1 i get no error messages but when i connect any devices to eth1 they don't get any IP. I cant find anything in any logs about devices trying to get an IP address. I dont have any firewall rules in iptables.
View 4 Replies
ADVERTISEMENT
Sep 21, 2010
I have openvpn tunnel setup between two CentOS servers. One of the CentOS servers also acts as a DHCP server for some client computers.
Server A= OpenVPN server
Server B= OpenVPN client (connects to Server A with OpenVPN)
The two CentOS servers can ping each other (172.16.0.0/24) via the tun0.
However, client computer connected to Server B (DHCP server) can't reach 172.16.0.1 (which is the OpenVPN server).
I think I am missing some routing in my "ip route show". Following is the full picture:
What command can I issue to get this fixed? something along ip route add?
There is no firewall service on both end. service iptables stop! I can't bridge eth1 and tun0 as DHCP server might mess up the other side. I can't do a push of "redirect-gateway def1" because then clients loose their IP as they send DHCP requests to Server A.
View 2 Replies
View Related
Nov 24, 2010
I have a Lan with 100 computers with microsoft windows xp and vista on it, and I need to build a CentOS Primary domain control- PDC. So I am building a PDC , with samba 3.x +Ldap ( Light Directory Acess Protocol), with static eth0 and DHCP-server( Dynamic Host Control Protocol) on eth1.
Eth0 : 192.168.1.3
Eth1 : 192.168.1.5
Here is the configurations files:
== BEGIN uname -rmi ==
2.6.18-194.17.4.el5 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==
== BEGIN cat /etc/redhat-release ==
CentOS release 5.5 (Final)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Permissive
== END getenforce ==
== BEGIN rpm -q yum rpm python ==
yum-3.2.22-26.el5.centos
rpm-4.4.2.3-20.el5_5.1
python-2.4.3-27.el5
== END rpm -q yum rpm python ==
== BEGIN ifconfig -a == .....
View 3 Replies
View Related
Sep 14, 2009
this should be trivial for all you big sysadmin guys My box is a firewall/gateway. ETH0 is on the Internet-side, and is fully auto-configured (DHCP client) from my ISP. ETH1 is on the LAN-side, has DHCPD enabled, and I route the traffic to/from the Internet via iptables (NATting, of course). Everything works pretty good, except for the DNS-server assignment via DHCP: how can I configure dhcpd.conf to assign the SAME dns-server I receive from my provider on ETH0 to all my PC on ETH1?
View 8 Replies
View Related
Nov 29, 2010
I've been using Debian Squeeze for a few years now, no troubles connecting to a DHCP server in PPOE session... (DSL service) until this morning (11.29.10) when now I do (that is to say; browser, email prog., terminal, real player, etc., just won't connect). I can do dual boot, & so am in Windows XP at the moment.
View 12 Replies
View Related
Apr 8, 2010
I have a home network, with an OpenWrt router operating successfully as DHCP server (using DNSMasq). I'm planning to install LinuxMCE on my main fileserver and in order for this to properly detect devices around the home it requires that it is the DHCP server. That would be fine except that I sometimes power down the fileserver (eg. when my in-laws sleep in the spare room where the server lives) and that would leave me with no DHCP which creates problems (when my in-laws want to get their laptop connected to the internet).
One answer is to get new in-laws which would be OK except that I'm still pretty keen on my wife. Alternatively is there any way to set up a fallback DHCP server ie. the router would check if there's a functioning DHCP server on the network (ie. the fileserver) and if it gets no response it will serve DHCP addresses itself.
View 2 Replies
View Related
Dec 26, 2009
For changing the the mac address of my lan card( eth0) in linux fedora 9(solphur) i used this command
And i could change my mac address successfully but now i couldn't connect to my network via a dhcp server ( in configuration section of my router im going to check my new mac address (because i want to spoof) ,how i can do that?
View 7 Replies
View Related
Aug 24, 2010
I have a home Debian server running, and i would like to set it up as a gateway. I have 2 networkcards in it. So internet comes from the modem and on the other card i want to setup a dhcp server and it has to share the internet. But i want it also to connect to a vpn and share the internet of the vpn.. Is that possible?
View 4 Replies
View Related
Jun 27, 2011
I have an ubuntu 11,04 samba domain server, I want to also configure this machine to work as a dhcp server, however this have give me some issues with te windows 7 workstations, my guest is that it have something to do with the iptables because those station do join the samba domain went both server and workstation are conected to a router.
This is the script I use at boot
Code:
#FOR SHARED INTERNET
/sbin/iptables -P FORWARD ACCEPT
/sbin/iptables --table nat -A POSTROUTING -o eth2 -j MASQUERADE
[code]....
I haven't test it with windows xp station but I have use the same code in the past with no problems, and since this is my first time joining windows 7 station i belive there must be some other port that need fowarding.
View 3 Replies
View Related
Jul 30, 2010
I try to generate a server client code. What i try to do is sending video streams from eth0 and eth1 to the other server programs' eth0 and eth1. In order to do that, i decided to use SO_BINDTODEVICE. But the code is not working. Am i misunderstood the usage of SO_BINDTODEVICE.
1-Defining two ports
2-Defining two sockets
3-Assigning host ips on them
[code]....
View 3 Replies
View Related
Feb 9, 2010
how to configure DHCP server on centos linux and how to configure FTP server on centos linux
View 2 Replies
View Related
May 7, 2010
I have installed Centos 5 on a virtual machine (esx4i). I set it to obtain an IP address from the DHCP sever, which is a broadband router, it has been given an IP address of 10.10.11.159 the router is 10.10.11.1 but I can't ping the router and I can't get any access to the network! I have a SCO Openserver server on the same physical box and it works fine so I know the network card & cable is ok.
View 9 Replies
View Related
Aug 25, 2010
I would like to install CentOS 5 to a NFS root. My NFS server is not CentOS. Is there a way to tell Anaconda to use NFS for root? Is there a way to mount some NFS space at /mnt/sysimage and get Anaconda to use it? I supposed it should be possible to either move an already installed CentOS system to NFS and rebuild initrd with a rescue boot or it might be possible to do a manual install using rpm directly to install the packages onto some NFS space. The first would require a local disk temporarily. The latter would be an excessive bunch of tedious work.
View 3 Replies
View Related
Sep 29, 2009
I must connect my apache server to a SQL Server 2008 and use the native instructions (mssql_connect)...in ubuntu this is provided by php5-sybase but in centos this rpm does't exists. How I can connect to SQL Server? I must compile php from source? Is There a way to use the freetds driver?
View 1 Replies
View Related
Apr 8, 2010
I am trying to get custom options to work.
This is my Dhcpd.conf file
This shows that I have 3 custom option in RED.
Now when I try to pull an Ip from the 96.63.0.0/24 subnet I do not see the options in the DHCPACK from the server. The client gets an IP 96.63.0.12 but no options are present in the DHCPACK or any other DHCP transaction. I have confirmed this trhough tcpdumps on the server and client.
The server version I am using is:
The version of the DHCP server is :
Internet Systems Consortium DHCP Server V3.0.6-Fedora
View 1 Replies
View Related
Aug 1, 2011
After a fresh install of Ubuntu 11.04 (from 10.04) and spending several hours trying to figure out why the ad-hoc connection between my two computers (Fedora14 <-> Ubuntu 11.04) no longer worked - it had worked fine for almost 2 years with 10.04 - I've finally concluded it was a DHCP problem. This realisation (which was slow in coming!) dawned on me when I reversed my setup and configured the Fedora box as the DHCP server and everything was suddenly working perfectly! A quick internet search threw up an installation file called "isc-dhcp-server" which other Ubuntu 11.04 - related forums are also complaining about. My problem is that this file, although available in the repository, is not even installed!!!
It seems unlikely that the developers forgot to include DHCP support, so I hope someone can point me in the right direction.
View 1 Replies
View Related
Aug 6, 2009
I am attempting to get this network card running under CentOS 5.2 but have had no luck. Some sites say to use the sk98lin driver, others the skge, which I can't find at all. I have tried multiple versions of the driver in rpm but none seem to work. The card shows under the network manager but will not get an IP address from the DHCP server.
Here are the outputs for this card.
uname -rmi
2.6.18-92.1.10.el5 x86_64 x86_64
lspci -m
04:01.0 "Ethernet controller" "D-Link System Inc" "DGE-530T Gigabit Ethernet Adapter (rev 11)" -r11 "D-Link System Inc" "DGE-530T Gigabit Ethernet Adapter (rev 11)"
lspci -n | grep "$(/sbin/lspci | awk '/net/ { print $1 }')"
04:01.0 0200: 1186:4b01 (rev 11)
lspci -vv
04:01.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11)
Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 121
Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at e800 [size=256]
Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
How to get this working as we have 3 of these cards for computers without a Gb NIC and I don't want to fight with it 3 separate times.
View 2 Replies
View Related
May 13, 2010
I'm trying to make a DHCP server work on my CentOS 5.4 box, but I have placed it on another subnet than the one that it is going to serve. I use a helper address on my router to make the the DHCP requests being routed to the DHCP server on the other subnet.
dhcpd.conf file:
ddns-update-style interim
ignore client-updates
ubnet 10.160.195.160 netmask 255.255.255.224
[code]...
View 8 Replies
View Related
Jul 27, 2010
i've installed bind and dhcp. I'd like to update dns automatically by dhcp. For the reverse-lookup-zone everything works fine. But for the forward-lookup-zone there is still the message denied. But i cannot see a mistake.
dhcp:
#
#
# DHCP Server Configuration file.
[Code]....
View 8 Replies
View Related
Jan 9, 2011
I got a CentOS server setup as a dhcp server using dnsmasq. I followed this guide more or less: [URL] So, the problem seems to be concerning the DNS server on the clients. In windows I get the "limited connectivity" icon for the network, and when I select troubleshoot it says the DNS server does not respond. Issuing 'ipconfig /all' clearly shows the IP of the CentOS machine as the DNS server, which should be correct, yes?
ETH0 is working as WAN connection and that works great.. no problem with the WAN connection at all on the CentOS machine. ETH1 has the IP 192.168.0.1 and mask 255.255.255.0 When starting eth1, it sometimes says that it can't start eth1 because the IP 192.168.0.1 is already in use.. but that is most certainly not the case. Maybe there's some kind of issue here that messes with the DNS? What's mind boggling is that it works great on a linux machine (dhcp client) and on a windows xp machine. but it does not work on the windows 7 laptop and a vista laptop and a pda device.
View 1 Replies
View Related
Mar 31, 2011
configuring DHCP server with two NICs. I need DHCP server with 2 NICs:
eth1 - 192.168.103.11
eth2 - 192.168.123.11
The client also has two NICs and suppose to receive ip addresses eth1 from 192.168.103.0 and eth2 from 192.168.123.0 Here is the dhcpd.conf from dhcp server:
ddns-update-style interim;
authoritative;
ignore client-updates;
[code]....
View 2 Replies
View Related
Sep 24, 2011
every time I try to connect to the ftp server I setup i am recieving this error Response:*** buffer overflow detected ***: /usr/sbin/vsftpd terminated Error:Could not connect to server
View 1 Replies
View Related
May 22, 2009
I have a fairly simple iSCSI setup using two devices, but they have swapped names on different machines. running CentOs 5.3 ia64, and using iscsi-initiator-utils-6.2.0.868-0.18.el5
vm1:
[root@vm1 ~]# fdisk -l
Disk /dev/xvda: 4194 MB, 4194304000 bytes
255 heads, 63 sectors/track, 509 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
Any way to get iSCSI to mount the devices as consistent device names ?
View 5 Replies
View Related
Jan 24, 2011
This dhcp server is configured with redhat enterprise edition. I found that logs are generating in the following path /var/log my doubt is how can i setup the logs generating for a specified day.
View 1 Replies
View Related
Dec 11, 2009
I was just wondering if someone could tell me the best method to connect all my hardwares together to achieve better result.HARDWARES.Cable ModemNETGEAR ROUTERNETGEAR FS728TS Smart switchLINUX SERVER WITH 2NICS.I want my dhcp server to serve 3VLAN networks. I need someone to show me how to do this. What do I need to do. keep in mind, I want eth0 to be used for public address only while eth1 for LAN. DHCP will be on eth0, but I need LAN on eth1 to be relayed back to eth0. This is my school project.
View 4 Replies
View Related
Aug 23, 2010
I'm new to CentOS and has recently use it.
I'm looking for a way to configure DHCP client so it would dynamically set the hostname and register itself to a DNS server. I don't have access to the DNS server.
View 6 Replies
View Related
Sep 1, 2010
I'm new to Centos 5 (and Linux) and, after installing Centos, I configured Samba, Apche, ... w/o problems (through interactive interface). My problem is tha t I need to use DHCP (all our clients use dynamic IP addresses for the ease) but I don't find dhcpd ... nor the sample config file(s).
Note : the new server I intend to use is actually connected on a LAN with an 'old' DHCP server (still under W2K server), is this the reason why I can't find/activate dhcp on my new machine ???
View 3 Replies
View Related
Oct 24, 2010
I've got a bit of a question. My network is laid out like this:
The role assignments are thus:
Firewall - sorts out the passing through to the 3 different networks, and acts as the traffic proxy.
Windows 2003 server - Does Active Directory and DNS
CentOS server - FTP and DHCP
Now, my problem is I need the CentOS server to be able to assign IP address to both networks, however, the CentOS server can *ONLY* be connected via the one interface to the firewall. It needs to assign the Windows 2003 server and the eth0 of the firewall an IP address via static DHCP, but it also needs to able to assign the clients dynamically via any address in the 10.23.1.0/24 range. I was thinking that I would be able to create static only assignments for the servers via their MAC addresses, and only have 1 dynamically assignable entry for the clients, and then get the firewall to allow ports 67 and 68 to flow freely between eth0 and eth1, but I wasn't entirely sure of the best way to do all this.
View 1 Replies
View Related
Apr 1, 2011
I had a server that I use for Radius DNS and Trying to put DHCP on it I have My pool in it seems right. I have 2 adresses aliased one being a helper IP that the router will send the request to. When I try to start the dhcp server I get the following.
Mar 31 14:33:11 rad2 dhcpd: No subnet declaration for eth0 (76.164.173.2).
Mar 31 14:33:11 rad2 dhcpd: ** Ignoring requests on eth0. If this is not what
Mar 31 14:33:11 rad2 dhcpd: you want, please write a subnet declaration
Mar 31 14:33:11 rad2 dhcpd: in your dhcpd.conf file for the network segment
Mar 31 14:33:11 rad2 dhcpd: to which interface eth0 is attached. **
[Code]...
View 1 Replies
View Related
May 26, 2011
I have a DHCP server running on CentOS and for some reason it is assigning the highest number from the IP range as a first one?
- range 192.168.1.20 - 192.168.1.50 - so the first IP on my PC recived from this DHCP server was .50 - is it normal behaviour?
Config file:
View 1 Replies
View Related
