postfix
Code:
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
[Code].....
Followed [URL] ubuntu 11.04 server
I've been having this problem since 10.6 released, but have until now been successful with the "just use Thunderbird" response. My sendmail server hasn't been changed, but as clients upgrade from OSX 10.5 to 10.6 suddenly mail.app will no longer connects to send SMTP messages through the server. (IMAP connections to the same server using the same user/pass combinations work perfectly) When I look at the logs, things basically stop right after the STARTTLS command.
Google indicates alot of people are having similar problems, but I'm not seeing any solutions. Do any of you administrate sendmail servers where some of your clients are using Apple's Mail.app on Snow Leopard, and if so what settings are you using? At this point, I'm happy to make changes to the server to accommodate Apple's issue, I have too many Mac users connecting to my server. I just can't figure out what to change. I've enabled virtually every possible login authentication combination, and none of them work.
the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>
View 1 Replies View Relatedi have tried mail function in php to send email from the local host its work for yahoo but not with HOTMAIL whay ! actually i tried to figure it out,
View 1 Replies View RelatedI do not know where the problem occurs, but when sending mail through FCI mail () on the Gmail e-mail fails to deliver. The logo is not a bug and should be on the list, center, walks etc mails totally normal, but gmail does not pass anything. Nothing in the spam ... I tried to create a new mail to Gmail and send the message, and nothing may be ...
You have no idea where it could be a potential bug? from webmail to send mail to gmail is realized, but through the mail () not ... I thought that the problem is in a blacklist from Google, but a week ago, we changed the IP server (migration) and the problem still persists ..
I have a gmail account. After I installed ubuntu 11.04 cannot use "mail notification" properly. the pop-up windows is like an error in the middle of the screen (instead of the classic and attractive window reside on the right-up screen).
(same problem was in ubuntu 9.04 : [URL])
I'm running a server with Ubuntu 10.04 and I have installed postfix and courier. The server can recieve mail and I can fetch them using POP, but when I try to send mail it doesn't work. Postfix itself can send email if i telnet from localhost and I am using my ISP as a relay because they block port 25. I'm using outlook 2007 on my client computer and it just says that the server rejects the login attempt and tells me to check my username and password. Postfix listens on port 12 as well because the client connection also has outgoing on port 25 blocked. I have tried to use telnet to connect to the server, and I can connect. This is what I get:
[Code]....
Now what? I've tried searching for the answer but all I can come up with is AUTH PLAIN or AUTH LOGIN, but I don't know what to type after that.
My offie machine is running a version of RedHat Enterporise Linux, and at home I am running Fedora 11. I am tryto configure my office machine so that I can use it as an outgoing mail server for my home machine using port 587. I've made the changes to sendmail.mc which are supposed to enable this, and nmap run on my home machine shows that port 587 is open on my office machine for submission. Also telnet office-machine 587 gives me exactly the same dialog as does telnet office-machine 25.So I think I am on the righ t track. But I haven't been able to configure either evolution or thunderbird on my home machine so it uses my offie machine as outgoing mail server. I've tried absolutely every possible configuration of those programs and none of them works. But I do have some additional bit of information. If I configure t hunderbird to use name and password Use secure authetication C onnection security None, then I am asked to enter a password, but nothing I try works.
The one bit of additional information is the following message in /var/log/messages on my office machine sendmail[28289]: unable to open Berkeley db /etc/sasldb2: No such file or directory That is indeed true. There is no such file. What does this mean, and is there something I can add to deal with the problem?
If I choose SSL/TLS for connection security instead, I get a connected to message which sits there working and eventually times out. When it does. /var/log/maillog says that sendmails tells me that my home machine "did not issue MAIL/EXPN/VRFY/ETRN during connection to MSA"
I don't know if that tells me anything or just means that nothing happened. I had no trouble using evolution or thunderbird with my office machine as outgoing server at port 25, but comcast has been blocking that port forquite a while now. I have been using comcast's mailserver as my sntpm outgoing mailserver on pport 587 during this time, and that works fine.
I have Opera 11.01 installed on Ubuntu 10.10. The "check all"mail function doesn't work even when "include this account when checking manually" is checked. If I check my accounts one at a time everything works properly. Whats up, is this a problem with Opera or Ubuntu?I should mention that my computer is a quadruple boot system.I have Windows 7, Windows XP, Ubuntu 32 bit and 64 bit installed.Ubuntu 64 bit is the only OS having mail problems
View 2 Replies View RelatedI cannot get exim4 to actually deliver any "local delivery only; not on a network".But whatever I do in the config, all mail gets frozen with entries in the log file like:"root@empty R=nonlocal: Mailing to remote domains not supported"Maybe the problem is that there is no fqdn for the computer (and will never be). How can I enable local mail delivery?
View 14 Replies View RelatedI followed this tutorial:
http://www.howtoforge.com/virtual-us...l-ubuntu-10.04
Minus the Quota for the mailboxes, since I don't really care about that. But I don't think that should cause any problems in the configuration.
The server is in my local network.
I tried to connect with Thunderbird and Kmail. Kmal brings up an error message eventually, saying something about a time-out.
Squirrelmail says code...
I searched everything & everywhere only to see that more people have that same error message come up with Squirrelmail. From my understanding some have fixed the issue but I couldn't actually find a solution to this.
Does anyone know how to fix this?
I have a 'little' problem with my vps, which was working before. Here is what I made:
- order an new IP and I was trying to modify /etc/network/interfaces in order to configure the ip
- even if I was logged as root, I wasn't able to modify 'interfaces' so I tried sudo and alsoto mount (different commands I found.)
- rebooted the VPS
Current situation: I can access ssh, but ispconfig3 and the websites are not working anymore.
Had to do a fresh install of 10.04 as upgrade went pear shaped. Now I cannot get hunderbird 3.0.4 to work just keeps timing out trying to access mail server pop.1and1.co.uk.Had to change some Firefox options to get it to work with any site other than google.Noticed that ping pop.1and1.co.uk sometimes gave a bad address until I disabled IPv6.
View 6 Replies View RelatedI've gotten myself involved in the Nagios monitoring tools and somewhat managed to configure the Nagios host, but I'm still having some issues with the email notifications.
From what I've read/researched, one of the favourite methods to get the email notification up is by using sendmail/postfix. I've went through it and learned that they are MTAs. What I actually needed is just a basic email client, and I would email the notices directly to an email address over the internet. Thus, I wont be needing something as complex like sendmail/postfix.
I gotten my hands on "Nail mail". I've successfully configured it to be able to send emails from my linux machine over the internet. However, when I copied the same command lines to nagios's contact.cfg, it did not work.
This is the command line that I'm using. Let me explain what I'm trying to achieve below. Firstly, I would save all the text notifications into a text file(green), and then email it out. The problem is NailMail command (red) does not work on Nagios,but the command line works in the terminal command on my Nagios account. Has anyone attempted using Nail mail with Nagios?
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
xx@xx.com
SMTP error from remote mail server after initial connection: host [URL] [ip address]: 550 Access denied...
I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies View RelatedI have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
View 1 Replies View RelatedCan this be done? A company is currently running a postfix mail server. They got a new server and, while the users are migrated, they need to have the messages delivered on BOTH servers.
I thought it could be easily done in postfix: deliver locally AND forward mail to new server, but all solutions I found would deliver the messages in just ONE place.
how to setup a local mail server for internal testing on my php development work. For example if I sent an email using php script to [url]....I should be able to check the mailbox of 'someone' either in Outlook or SquirrelMail.I have done some reading about this. All I know is that I need Postfix with Courier. But I just don't know to get it working.
View 3 Replies View RelatedHow do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.
View 6 Replies View RelatedThere is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
View 2 Replies View RelatedI've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
Server Apache doesn't work.Note the LOG line,you cannot modify or delete "logs/"
View 1 Replies View Relatedsmall office network with Linux CentOS 5.4 internet server. I use Squid 2.6.STABLE21. I have static IP.If I masquerade my small office net FTP works, but if I disable masquerade then FTP doesn't work through Squid.I was trying to stop iptables but the problem was the same.
View 9 Replies View RelatedI have a simple cron job that runs every night & I tested this manually by just running the command as root in bash and all worked fine. It took some time but the crob job finished and I got my results emailed to me perfect / as expected.
Here is root's cron job listing:
Code:
Now I noticed that I never ever got anything emailed to me the following day so I am wondering if perhaps the Cron daemon doesn't have permissions or has an issue running / executing the command rather than when I test the command as 'root'? When I view my logs, I can see the command being executed and don't see any errors however I don't get email results when Cron runs the job rather than me taking the command and running it manually in Bash...then it works. What am I missing?
Code:
host - ubunut 1010 desktop 64bit
virtualizer - VirtualBox ver 3.2.10 r66523
guest (VM) - ubuntu 1010 server 64bit
[code]....
My ftp server runs vsftp. The ftp passive ports stopped working while iptables is running, so users can't ls their dirs. I know that you need to load the modules of ip_conntrack and ip_conntrack_ftp, the problem is when I modprobe ip_conntrack I get the error: FATAL: Module ip_conntract_ftp not found. No that is not a typo. ip_conntract_ftp? Am I missing something?
View 2 Replies View RelatedI am trying to install some packages in a ubuntu 8.10 server, however, apt-get doesn't work (I get several 'not found' errors). Is there any way to do that? I know this version is probably not supported anymore but I can't just format a customer server because it's OS is outdated...I just can't put my sources.list on it because I am on ubuntu 10.10 and it would download updates for the wrong OS probably causing a huge damage on the old one.
View 9 Replies View RelatedHave done a fresh install of 11.04 32bit and after getting everything to work I have run into a 11.04 killer for me. PS3 Media Server don't work It doesn't detect the PS3 correctly and on the PS3 side it just keeps saying "data corrupted" for every video I try to play. It used to work perfectly on 10.04.
View 3 Replies View RelatedI have a computer that I would like to backup the home directory onto a server. I created a script called wien_backup.sh that contains the following:
#!/bin/bash -l
/usr/bin/rsync -rv --delete-after --ignore-errors -e /usr/bin/ssh root@wngr403-unix2:/home/ /space/systemimager/Wien/
where wngr403-unix2 is the computer I am backing up, and the script is ran from the server. If I run the script by itself, it works just fine. If I run it as a cronjob, the /var/log/syslog says it ran, but it does nothing.