Server :: Server Apache Doesn't Work
May 21, 2011Server Apache doesn't work.Note the LOG line,you cannot modify or delete "logs/"
View 1 Replies
ADVERTISEMENT
Server :: Change Of Apache Httpd.conf Doesn't Work On CentOS/RedHat?
Jun 30, 2010I've been trying to make install apache 2.1.8 and php 5.2.3 and work on them. After updating and installing some dependence files, apache and php could both be installed.
Then I tried to configure them. I added the following content to the end of Apache httpd.conf:
Code:
Then I run /path/to/apachectl start, and saw the message:
Quote:
Invalid command 'RewriteEngine', perhaps misspelled or defined by a module not included in the server configuration
Then I remembered that I didn't include the rewrite module while making install apache. So I removed the 2 lines I just added to httpd.conf.
But, after running /path/to/apachectl stop and start again, I could still see:
Code:
When I use firefox to open http://host_ip:8080/, I could see "It works!". But when I open http://host_ip:8080/hello.php (the file is already under htdocs), firefox said
Quote:
Failed to Connect
Why and how to solve it?
I noticed that for some stupid reason, the conf file wasn't updated at all and the 2 erroneous lines were still there.
Ubuntu Servers :: Writing Specialization Work About Administration Apache And Ftp Server On 10:10 Server?
May 22, 2011Does anyone have some material about statistics using ubuntu / linux server, or a text which generally describes the ubuntu server?I need urgent, i'm writing specialization work about administration apache and ftp server on ubuntu 10:10 server, so I need something for the conclusion.
View 7 Replies View RelatedCentOS 5 Server :: Apache 'server-status' 404 Not Found + Munin Apache Stats?
Oct 14, 2010I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
Server :: All Apache Vhosts Work Except One
Aug 20, 2010I'm switching internet providers and right now have service with 2. I tried switching my server over today, and ran into trouble so decided to switch it back. I got everything set up again, and it all seems to work - except for ONE of my vhosts. The others work as expected. One (the only "real" site I host) simply hangs. I am "watching" the log file, and the top-level request for "/" (sometimes) comes through and reports response code 200. But, none of the other files (images, css, etc) get requested, and the page never loads.I'm not sure where to even start. Apache is fine since the other vhosts work. I didn't make any changes to my config - except for changing the ip address in my dns. But, that's the same for all vhosts.
It may be worthwhile to note that I changed it back when I tried bringing up the site with the new ISP and it brought up my (new) modem settings with the url. I panicked and couldn't figure out how to fix it.. I thought maybe someone could have been playing with my modem settings (I was automatically logged in as administrator), so I set it back to factory settings. Then I couldn't get the internet to work at all, and changed it back to my original service. Now everything works except for the one vhost.
CentOS 5 Server :: Need To Restart Apache If File Doesn't Exists
Jun 6, 2009I'm running CentOS 5.3 64bit and from the get go I've had problems with the Apache server.More specifically, on what seems to be a random occurance, the apache server stops to respond.The process is still running, but nothing happens with it, and it is not responding.The /var/logs/httpd/error_log is blank for the occurance and only shows an entry after I give it a restart.So I'm a bit confused about what is going on.With that said, I need to make sure the httpd is working one way or another.I don't want to force a restart service every 10 minutes as this seems a bit too much.However, I do want to have the following:
run a crond every minute to do:If it fails, then do service httpd restart (and log the failure and restart to a file and email me a message).Any pointers on how to do that?It ain't the pretty solution, but it will save me from a very angry user until I'll figure what is the real cause for this failure.
CentOS 5 Server :: Webmin Doesn't Show Apache Modules?
Apr 26, 2010this might not be a Centos related issue, but since I'm using Centos I guess it doesn't hurt to ask; I've used Ubuntu before and haven't encountered this. So, I've just installed Centos and Webmin and now I'm trying to configure the server. Problem is that on the Apache configuration page I don't have the option (should be there) to configure the Apache modules. I've attached a file to show where the modules option should (as before) appeared.
View 6 Replies View RelatedServer :: Block Connections To Apache If Client Doesn't Have Valid Request Headers?
Feb 8, 2011My server gets ddos attacks. I dig into access logs and I saw that attacker ips doesn't have valid requests headers, like their browser application info or requested url info.I want to close those connections immediately, and if it's possible block those ips for a time period.Can I do that with Apache and iptables?I searched on the internet but couldn't find useful results. Probably couldn't search for the right words.
View 2 Replies View RelatedServer :: Server Slow : Apache Mysql Fine Tuning Server For Faster And More Responsive?
Apr 21, 2011I'm running a linux cloud server with the following config
1.2ghz Processor allocation
752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
Httpd.conf
Timeout 20
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
code....
Server :: Fighting Apache To Make It Work With Symlinks?
Jun 23, 2010I'm having a real problem getting Apache to allow a symlink on a particular folder. The symlink is at /var/www/html/images and it points to /home/foo/images.Here is the relevant section to my httpd.confQuote:
<Directory />
Options +FollowSymLinks
AllowOverride None
[code]....
CentOS 5 Server :: Apache MySQL PHP Does Not Work On New Install
Jul 17, 2010I just installed Centos 5.5 on one of my systems today and something is eluding me. Basically I had a web site and forum software (phpBB, but I don't think it's that, other forum software like Xoops does the same thing) running on Fedora 13, and I copied it over to the new Centos installation. Apache is running fine and displays a PHP test file and .html files just fine.
MySQL seems to be fine, I can log into that, show databases etc. Just can't get any forum software to know there is MySQL there. I did change the path of the site, and the databases, and edited /etc/my.cnf and /etc/httpd/conf/httpd.conf to reflect that. Thought I made the needed changes in /etc/php.ini but who knows. Seemed like everything should have tar'd up and moved easy, but not the case...
CentOS 5 Server :: Dovecot/apache Not Working Properly - How To Make It Work Correctly
Mar 20, 2010I am running a quad core centos 5.4 box that is having a strange problem with dovecot. The administration panel is able to send emails through dovecot but not any of the user accounts (ie with webmail). I've done a bit of research with what could be wrong but haven't had any luck so far I am also having a weird problem with apache: on a c++/php bittorrent application I was going to be running on a subdomain of my main site I get a 500 error every time I try to log in. The only way to get rid of the 500 error is to clear the chache (so its horribly broken somehow). The error generated in the log whenever I try to log in is that "ffmpeg is already loaded" (which I am running on the main site and is critical). Is there a way of either repairing my apache install or excluding ffmpeg on the subdomain in the conf or something?
View 2 Replies View RelatedServer :: FTP Doesn't Work Through Squid?
May 26, 2010small office network with Linux CentOS 5.4 internet server. I use Squid 2.6.STABLE21. I have static IP.If I masquerade my small office net FTP works, but if I disable masquerade then FTP doesn't work through Squid.I was trying to stop iptables but the problem was the same.
View 9 Replies View RelatedServer :: My Cron Job Doesn't Work
Jun 1, 2010I have a simple cron job that runs every night & I tested this manually by just running the command as root in bash and all worked fine. It took some time but the crob job finished and I got my results emailed to me perfect / as expected.
Here is root's cron job listing:
Code:
Now I noticed that I never ever got anything emailed to me the following day so I am wondering if perhaps the Cron daemon doesn't have permissions or has an issue running / executing the command rather than when I test the command as 'root'? When I view my logs, I can see the command being executed and don't see any errors however I don't get email results when Cron runs the job rather than me taking the command and running it manually in Bash...then it works. What am I missing?
Code:
Server :: Vhosting Doesn't Work On VM?
Apr 17, 2011host - ubunut 1010 desktop 64bit
virtualizer - VirtualBox ver 3.2.10 r66523
guest (VM) - ubuntu 1010 server 64bit
[code]....
Server :: Vsftpd Doesn't Work
Jul 25, 2011My ftp server runs vsftp. The ftp passive ports stopped working while iptables is running, so users can't ls their dirs. I know that you need to load the modules of ip_conntrack and ip_conntrack_ftp, the problem is when I modprobe ip_conntrack I get the error: FATAL: Module ip_conntract_ftp not found. No that is not a typo. ip_conntract_ftp? Am I missing something?
View 2 Replies View RelatedUbuntu :: 8.10 Server Apt-get Doesn't Work Properly
Apr 25, 2011I am trying to install some packages in a ubuntu 8.10 server, however, apt-get doesn't work (I get several 'not found' errors). Is there any way to do that? I know this version is probably not supported anymore but I can't just format a customer server because it's OS is outdated...I just can't put my sources.list on it because I am on ubuntu 10.10 and it would download updates for the wrong OS probably causing a huge damage on the old one.
View 9 Replies View RelatedUbuntu :: Ps3 Media Server Doesn't Work?
May 1, 2011Have done a fresh install of 11.04 32bit and after getting everything to work I have run into a 11.04 killer for me. PS3 Media Server don't work It doesn't detect the PS3 correctly and on the PS3 side it just keeps saying "data corrupted" for every video I try to play. It used to work perfectly on 10.04.
View 3 Replies View RelatedServer :: Cronjob Rsync Doesn't Work
Mar 28, 2011I have a computer that I would like to backup the home directory onto a server. I created a script called wien_backup.sh that contains the following:
#!/bin/bash -l
/usr/bin/rsync -rv --delete-after --ignore-errors -e /usr/bin/ssh root@wngr403-unix2:/home/ /space/systemimager/Wien/
where wngr403-unix2 is the computer I am backing up, and the script is ran from the server. If I run the script by itself, it works just fine. If I run it as a cronjob, the /var/log/syslog says it ran, but it does nothing.
Server :: ISPConfig3 Mail Doesn't Work
May 22, 2011postfix
Code:
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
[Code].....
Followed [URL] ubuntu 11.04 server
Server :: The Sendmail + Dovecot Doesn't Work
Jan 28, 2010I used fedora12 builded mail server uning sendmail and dovecot at my home, when I at home everything are works fine, no matter I sent email to hotmail, or hotmail sent to my mail server, but I got the problem that I can't access my home server when I at office, the error messages as below:
#telnet xxx.xxx.xxx.xxx 110
-ERR Cannot connect to POP server xxx.xxx.xxx.xxx (xxx.xxx.xxx.xxx:110), connect error 10061
#telnet xxx.xxx.xxx.xxx 25
[code]....
P.S there is no firewall between the my office and home
Server :: Snmpwalk Doesn't Work On Local Ip?
Dec 17, 2010I have a server that has snmp installed(Version is net-snmp-5.3.2.2-9.el5_5.1). This server has 5 n/w interfaces with diferent ip's. My problem is when i try snmpwalk on to the main interface, in my case "bond0" with the assigned ip address there is no response.
eg: snmpwalk v2c -c nature 172.17.241.190
No Response from 172.17.241.190
But when i run the same query with "localhost" snmpd responds.
eg: snmpwalk v2c -c nature localhost
[Code].....
I want to snmpwalk in to the "172.17.241.190".
CentOS 5 Server :: SMTP Doesn't Seem To Work
Apr 28, 2010I have a dedicated server running CentOS 5, Plesk 9.2.2, SMTP Postfix and Courier-IMAP.The issue I have is that on all domains on the server receiving email works fine however sending email never seems to work. This is from email programs, my phone, webmail and PHP. None of them seem to be able to send email. If it is of worth Spam Assassin is running however I don't feel it is causing any problems.
View 7 Replies View RelatedUbuntu :: Login To Workplace Server From 10.04 Doesn't Work
Apr 11, 2011My mother runs Ubuntu 10.04 on her home computer, but on her workplace they use some version of Windows. Her IT-guy sent her a .rdp-file for logging in to her workplace server. This file doesn't work in Ubuntu, and the IT-department at her job can't solve the problem. Ergo; She's unable to log on to her workplace computer/server from home.
View 3 Replies View RelatedUbuntu :: Upgrade To 10.04 Keyboard Doesn't Work In X Server
May 29, 2011After I finished upgrading Xubuntu from 9.10 to 10.04, I discovered that my keyboard stopped working in X Server. The upgrade process was running smoothly until the last moment, when it produced some error, which I, unfortunately, did not write down. Anyway, the upgrade has completed; uname shows kernel version 2.6.32-31. Now the keyboard works fine if I select a recovery mode at startup, but if I type 'start gdm' from the shell or select the default option in GRUB while booting, the keyboard becomes unavailable right from the login screen. I can log on using the virtual keyboard, but that's all I can do; the keyboard is still dead.
View 5 Replies View RelatedServer :: Yum-updates Configuration - Option Doesn't Work At All
Dec 5, 2010I can see that in yum-updatesd configuration i can use smtp_server to rely mail notifications as per below outputs from man pages smtp_server SMTP server to use when sending mail, host or a hostort string. Defaults to localhost:25. The problem that this option doesn't work at all and it rely into the local MTA not the one set on the smtp_server
View 2 Replies View RelatedUbuntu :: Samba Server And Windows 7 - User Doesn't Work?
Feb 7, 2010So here is what I'm trying to do: I want to share a folder and have it so that guests can access it, but only read. I also want to make it possible that I can mount it as a network drive on my Windows 7 machine and login with my linux account so that I can have write access. This is from a completely stock Ubuntu 8.10 and Samba config. Everytime I've tried I've failed to get it working.
View 1 Replies View RelatedServer :: Using Locate With Rm - Doesn't Work When Pathnames Occasionally Contain Spaces
Mar 2, 2011does anyone know how can I use locate with rm? rm `locate "some file"` does not work when my pathnames occasionally contain:
-spaces and other characters (like + or possibly others that need escaping)
-greek characters
how can I grab line-by-line the output from locate and wrap quotes"" around the paths?
CentOS 5 Server :: Makehistory Utility For Innd Doesn't Work
Nov 19, 2009Trying to migrate our news server to a new instance on centos5 and having issues with the makehistory utility. It errors out and then just creates all null values for the overview database. Here is the output:
[root@server overview]# /usr/lib/news/bin/makehistory -O -x -F
*** glibc detected *** /usr/lib/news/bin/makehistory: free(): invalid pointer: 0x000000000063ce60 ***
======= Backtrace: =========
[Code].....