figure out this error?
Code:
kradalby@hpcompaq6530b-laptop ~/.ssh $ ssh -vvv -p 110 kradalby@dfekt.no
OpenSSH_5.5p1 Debian-5+b1, OpenSSL 0.9.8o 01 Jun 2010
[code]....
I am pragmatically trying to upload a list of files from my client machine to a proFTPd server I have running on Ubuntu. Every time I get several (around fifty) files into the transfer, I get the following error: Quote: Connection reset by peer: socket write error
I am able to remotely upload 25,000 small files of ~ 1K in size, but when I go to upload hundreds of 2-4 Mb files, I get a socket write error. Am I using up all available sockets before they can be released? If so, how do I release the sockets? If not, what does this error mean and why am I getting it?
I am a system administrator and i have configured squid server at the server side.Now i am facing a problem that these two websites are not accessible through squid transparent proxy server while they are accessible when changing the gateway.The websites are following:-
[URL]
This type of error message comes ERROR The requested URL could not be retrieved While trying to retrieve the URL: [URL] The following error was encountered: * Read Error The system returned: (104) Connection reset by peer
when i ran amcheck DailySet1 as backup user and got these messages:
[Code]....
My system just crashed.
kduffy101@kduffy101-desktop:~$ firefox
WARNING: pipe error (3): Connection reset by peer: file ./src/chrome/common/ipc_channel_posix.cc, line 404
Segmentation fault
kduffy101@kduffy101-desktop:~$.
When I do an amcheck, I get this Amanda Backup Client Hosts Check WARNING: noname.com: selfcheck request failed: recv error: Connection reset by peer Client check: 1 host checked in 0.022 seconds. 1 problem found.
I am using bsdtcp. I get an ack error if I switch the client to bsd authentication. What should I do, how do I fix it? I read that I should enter servers address to hosts file in /etc/ directory? Here is the log in /var/log/messages:
[Code]....
which cropped up today after no changes to the system: I can successfully ssh into my ubuntu 64-bit 9.10 machine (via OS X with iTerm), but after about 30 seconds, the connection drops with the message "Connection reset by peer Connection to xx.xx.xx.xx closed".
If I then try to immediately ssh back in I get: "Write failed: Broken pipe". If I try to immediately ping the machine instead, I cannot ping it until the ~10th try. Eventually I can log back in again, only to be kicked off after between 5 and 60 seconds. I called the network people and their are no known issue right now with networking. The networking on the ubuntu machine is otherwise fine, it seems. In the /var/log/auth.log file, it simple says:
Quote:
Feb 9 14:19:20 harriet sshd[4134]: Accepted password for xxx from xx.xx.xx.xx port 55105 ssh2
Feb 9 14:19:20 harriet sshd[4134]: pam_unix(sshd:session): session opened for user xxx by (uid=0)
Feb 9 14:19:28 harriet sshd[4046]: pam_unix(sshd:session): session closed for user xxx
The solution I come across to a similar problem is to add a "ClientAwakeInterval" number to sshdconfig, but this (as expected) doesn't fix my problem.
I have an external hd attached to my one computer at home, use DynDNS to give it a static address, and can usually ssh into the machine fine. I ran update a few days ago and now have the much-aligned "connection reset by peer" error. I checked the machine and made sure everything was "normal;" e.g., checked ssh config for the port change (correct), doubled-checked ufw to make sure the port was open (it was), etc. I ran nmap on the machine and it said the port was open. This morning when I arrived at work, I ran nmap on my machine here where I've been unable to connect and its results were a little surprising: the port I specified at home and was demonstrated as open is not. WTF?
View 9 Replies View RelatedWhen I plug in my iPhone to my 10.04 machine, it's recognized. I can always drag music from the iPhone to the Music collection in Rhythmbox, but 9 times out of 10 dragging the other ways gives me this error:
"Error while getting peer-to-peer dbus connection: The name :1.219 was not provided by any .service files"
I've happily been using rdesktop to access my MS Vista desktop from Ubuntu (Hardy) for a few months until a couple of days ago when it stopped working. Now if I try connecting I get the following:
[Code]....
I don't believe anything's changed on the client (Ubuntu) side. The Vista box is occasionally connected to a corporate intranet via VPN and it was after such a session that rdesktop stopped working, so perhaps a Windows group policy was modified during the session. I've checked the basics - can ping 10.1.1.2 from Ubuntu, can access port 3389. Have deleted ~/.rdesktop and ~/.tsclient.
Digging around the Vista client I noticed in Control Panel > System Properties > Remote that in the Remote Desktop sub-panel the Allow connections only from computers running Remote Desktop with Network Level Authentication setting is enabled and that the other two are greyed out. Now, I don't know whether this setting has been changed but I suspect that it might be the problem.
Unfortunately, I don't know enough about Windows to know how or even whether I can change this setting to Allow connections from computers running any version of Remote Desktop (less secure) I've poked around the group policy editor (gpedit.msc) but no joy.
when i run "sudo startx" i get the message:
"(= Log file: "/var/log/Xorg.0.log", Time: Sat Oct 2 15:33:49 2010
(= Using config file: "/etc/X11/xorg.conf"
(II) Module "ddc" already built-in
[code]....
Fatal server error:
no screens found
waiting for X server to begin accepting connections giving up.
xinit: Connection reset by peer (errno 104): unable to connect to X server
xinit: No such process (errno 3): Server error."
My version of ubuntu is 8.04 and the video card is 82G33/G31 Express Integrated Graphics Controller.
When I try to connect to cvs server this is the error message I get.
I also tried cvs -d server:newuser@localhost:/cvs/CVSROOT login but getting the same result
My repository is in /cvs/CVSROOT
I also tried changing /etc/xinetd.d/cvs with different options, current it looks like this:
And my /etc/xinetd.conf is
cvspserver stream tcp nowait root /cvs cvs --allow-newuser=/cvs/CVSROOT pserver
defaults
# The next two items are intended to be a quick access place to temporarily enable or disable services.
#
# enabled =
# disabled =
"Read from socket failed: Connection reset by peer" after installing latest version of openssh under debian. What to do?
View 5 Replies View RelatedI've followed [URL] to set up vpns with some external networks. So far it worked like a charm on two of them. But when trying to connect to the third one I instantly get bumped off.
When running
Code:
pon dymka debug dump logfd 2 nodetach
I get this as part of my output
Code:
CHAP authentication succeeded
sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
rcvd [IPCP ConfReq id=0x26 <addr 192.168.0.2> <compress VJ 0f 00>]
sent [IPCP TermAck id=0x26]
rcvd [CCP ConfReq id=0x3e <mppe -H -M +S -L -D -C>]
Refusing MPPE stateful mode offered by peer
MPPE required but peer negotiation failed
sent [LCP TermReq id=0x2 "MPPE required but peer negotiation failed"]
sent [CCP ConfRej id=0x3e <mppe -H -M +S -L -D -C>]
rcvd [CCP ConfNak id=0x1 <mppe -H -M +S -L -D -C>]
Discarded non-LCP packet when LCP not open
rcvd [LCP TermAck id=0x66]
Connection terminated.
Waiting for 1 child processes...
script pptp xxx.xxx.xxx.xxx--nolaunchpppd, pid 8920
Script pptp xxx.xxx.xxx.xxx --nolaunchpppd finished (pid 8920), status = 0x0
I've looked all over the internet but sollutions like adding mmpe-stateful to options.pptp doesn't work. Is this a problem with the client or with the server? Because the server is configured just like the other two and they work as intended. Seemed to be a problem on the firewall.
I have a new install of Ubuntu 10.04.1 LTS server. But I get errormessages trying to start samba.
caesar@klem:/etc/samba$ restart smbd
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
I have tride to remove an install samba. And deleted smb.conf. And startet with the original.
smb.conf:
workgroup = Easyways
server string = %h server (Samba, Ubuntu)
log file = /var/log/samba/log.%m
max log size = 1000
[Code]....
I'm writing a client-server program. There are more than 500 clients. I start a thread to process and response to each client and the processing needs some MySQL query. I'm looking for any possible hazards on my server!
1- Any limitation on "Maximum Simultaneous Socket Connection"?
2- Any limitation on using mysql?
3- As socket on Linux are file, Any limitation on number of sockets or threads?
I'm using a Linux server (Centos or Fedora or Ubuntu) and clients are both Linux and Windows.
I finally got the certs to configure:
openvpn --config server.conf
Tue May 3 17:26:27 2011 OpenVPN 2.1.1 i686-redhat-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Jan 5 2010
Tue May 3 17:26:27 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Tue May 3 17:26:27 2011 Diffie-Hellman initialized with 1024 bit key
Tue May 3 17:26:27 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Tue May 3 17:26:27 2011 ROUTE default_gateway=192.168.122.1
Tue May 3 17:26:27 2011 TUN/TAP device tun0 opened
Tue May 3 17:26:27 2011 TUN/TAP TX queue length set to 100
Tue May 3 17:26:27 2011 /sbin/ip link set dev tun0 up mtu 1500
Tue May 3 17:26:27 2011 /sbin/ip addr add dev tun0 local 10.8.0.1 peer 10.8.0.2
Tue May 3 17:26:27 2011 /sbin/ip route add 10.8.0.0/24 via 10.8.0.2
Tue May 3 17:26:27 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Tue May 3 17:26:27 2011 Socket Buffers: R=[114688->131072] S=[114688->131072]
Tue May 3 17:26:27 2011 UDPv4 link local (bound): [undef]:1194
Tue May 3 17:26:27 2011 UDPv4 link remote: [undef]
Tue May 3 17:26:27 2011 MULTI: multi_init called, r=256 v=256
Tue May 3 17:26:27 2011 IFCONFIG POOL: base=10.8.0.4 size=62
Tue May 3 17:26:27 2011 IFCONFIG POOL LIST
Tue May 3 17:26:27 2011 Initialization Sequence Completed
But openvpn still won't start; where to go from here.
Tue May 3 17:54:25 2011 TCP/UDP: Socket bind failed on local address 192.168.122.3:1194: Address already in use
Tue May 3 17:54:25 2011 Exiting
I have a server listening on incoming client connections. Once the client establishes SSL connection with the server, the server waits on read() from the client. Only Client can disconnect the connection. I want to have a timer in the server program to wait for x secs after read() and then disconnect the Client connection.
View 3 Replies View RelatedI'm having problem running open SSH. I have installed SSH, on my system, but when I run:ssh localhost.I get the error :Read from socket failed:Connection reset by peer.I get that same error when trying to connect from a different local computer.When I attempted to restart the service by typing: sudo /etc/init.d/ssh restart.I proceeded to generate a new set of keys by running, ssh-keygen -b 1024.But I get the same errors after doing so.
View 1 Replies View RelatedI am trying to get fedora-ds running on a machine. I can't log onto the console at all. If I use the command line below the log shows multiple instances on the following lines. fedora-idm-console -D 9 -x nologo
[Code]......
I want to configure socket timer to release socket(port) once the connection is terminated. Do we have something in Linux OS to configure this delay to release socket?.
Any command, link or man-page anything will be helpful.
I browsed a lot but unable to find it.
Anyone knows the difference between a socket and TCP connection for connecting to an external system?
View 1 Replies View RelatedI tried to install vsftpd on my server and while the installation went fine, I can't run
Code:
restart vsftpd
As I the get error
Code:
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with
sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.
I got an error while working with NetworkManager in new RHEL6/ Fedora14. I have a ZTE AC 2726 3G wireless modem. i had tried to connect it via NetworkManager . It only requires username and password to connect but the thing is that after putting all the credentials i had checked the option" available to all the user "and while i was trying to save the profile it shows the following error saving connection failed 0 can't write connection type 'cdma'I had google so many times around this error but no better solution is there .
View 1 Replies View RelatedERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2). I've had this problem to the point where I thought I messed up my actual configuration so bad that I reinstalled Ubuntu to get rid of all the MySQL configuration; I ran MySQL through Windows with a breeze, but I'm getting some errors like that after restarting my computer just a few minutes ago and I have not changed anything in my SQL settings. I'm on Ubuntu 10.10 64 bit and running MySQL 5.1. the actual error that I get from Navicat and from the website is at [URL]... Update: 20110402. Connection for controluser as defined in your configuration failed. Just got that when I tried to log in to phpmyadmin.
View 4 Replies View RelatedI am using Ubuntu 10.4 LTS and Samba3.4.7.I have read a lot of posts and different web pages on setting up Samba on a Peer-to-Peer network with Windows XP but just cant make it work. I can see the Guest account in XP My Network Places but cant access the folder when I click on it.Network not accessible or you dont have permission. I can PING both ways ok. I have Firestarter turned OFF and I dont have any third party firewall on XP.
This is my samba config file:
[global]
netbios name = dolphin
server string = Ubuntu
workgroup = WATERLILLY - same as XP
[code]....
net ads join -U admin_name admin passwordgives the following error: Failed to join domain: failed to lookup DC info for domain 'domain_name' over rpc: Logon failureIn the log, is the error messagewinbindd/winbindd_ads.c:ads_cached_connection(127) ads_connect for domain SPCRANE failed: Cannot read passwordkinit admin@domain_name works correctly, so kerberos is working. The ticket is generated, and I can see it with klist. the smb.conf file has the matching realm. It is configured identically like a redhat 5 box that does work
View 2 Replies View Relatedim getting that error in my code for some reason. I compiled my code, and when i try to run this server it throws me an error on my call to setsocketopt(). The only way it can reach that part of my loop is if it succeeds when it calls sock() so I dont understand why the error says its an operation on a non-socket. Im just trying to set up a server to pass messages from a client to it a viceversa. Here is the code:
Code:
int main()
{
int socket_fd, new_socket_fd, k;
struct addrinfo hints, *server_info, *p;
struct sockaddr_storage peer_address;
code....
Where do I get Frostwire to install? None of the repos I have have it.
What are other popular peer to peer programs?
I know I'm missing something absolutely basic here but when I search the forums for filesharing I only seem to get info referring to Windows filesharing/SAMBA etc.
We have 3 Ubuntu machines at home and a printer on a Windows machine. How can we best fileshare:
1) between Ubuntu machines
2) reliably between Ubuntu and the Windows machine
Printing across the network is ok except for the Karmic NBR machines but that's another thread.