Server :: Can't See From A Mac Workstation Using Netatalk
Feb 7, 2011
I am upgrading my linux server to Mandriva MES 5 server. Although its working fine (I can copy/delete/execute files from/to linux server), at mac workstation, at chooser, when I click on appletalk icon nothing happens. I have to click on Server IP address button and type my server IP, which is 192.168.0.123. Its is annoying and time consuming. I have to do this every time I want to access my server. At previously version, after I click on appletalk icon (at chooser), the server name comes up right away.
View 10 Replies
ADVERTISEMENT
Mar 17, 2011
I am having trouble with netatalk after rolling out 11.4 on my home server. I am using the same conf files from my previous 11.3 setup. I use netatalk for my macs as it tends to work better than samba.
I can access the afp volumes if I enter the full unc in finder (afp://server/data). The problem is that if I try to browse to the server via finder (click on the server icon) I get a connection fail. With 11.3 this would simply list out all available volumes.
View 1 Replies
View Related
May 13, 2011
I am connected to a server with openvpn. When I try to get a file from this server to my workstation, then the error appears : ssh: 2011-04-28_10: Name or service not known
But in fact the name of the file is :
2011-04-28_10:26:45
I guess the system can not handle the time indication in the filename ?
Escaping it with does not help apparently.
View 8 Replies
View Related
Oct 10, 2010
i already setup a skolelinux 5 main server & a skolelinux workstationboth can ping eachother and resolve each other's name since i already added the workstation in the main server using lwat but i cannot log in from the workstation with the user that i had added on the main server. What should i do to make this work?
View 2 Replies
View Related
May 21, 2010
I have a 64 bit Dell laptop happily running 10.04 32-bit and Windows 7 booting with GRUB. I want to also install Lucid server on a spare 20GB empty partition and I would like to have Lucid server available in the GRUB menu along with Lucid 10.04 and Windows 7.
I don't want to blow away what I already have working and last time I booted from the server CD to try to install it (9.10), it didn't look as easy as when I installed workstation. Will an install of Lucid server gracefully and safely allow itself to be put on a spare partition and install itself in GRUB or so I need to do this manually? If I lose my Lucid workstation install, I am in trouble.
View 3 Replies
View Related
May 5, 2011
I just wanna simulate HPC and and other kinds of clusters in VMware workstation 7.0 , in my HP 520 laptop which is dualcore and 3Gb RAM. So can u please help me out regarding this.. I am interested to work in clusters. I am new to this hpc and other clusters..please can any one gve me document on cluster installation and configuration. I would be grateful to them.. I am using Centos OS.
View 4 Replies
View Related
Jul 19, 2010
Can we do kickstart installation of linux on Vmware Workstation.
View 1 Replies
View Related
Jan 13, 2011
I have just installed Ubuntu 10.04 Server on my HP z800 workstation with intel Xeon processor.Installation is fine but monitor goes to sleep mode on boot up.
View 9 Replies
View Related
Sep 23, 2010
How to setup vncserver and keep it running in the background after restart on Lenny workstation? The admin should be able to connect every time via vncviewer to this workstation.
View 2 Replies
View Related
Mar 24, 2011
It's been a while since I configured a raid and have been making some changes to my main workstation/server.
fdisk does not like md devices on my machine... always says it has an invalid partition table. While this is said to be normal all over the net, I don't feel warm and fuzzy about that fact. What is best practice these days, to create a non-partitionable md device or a partitionable mdp device?
If I create a partitionable md device, I would imagine it would look good in fdisk. However, I am concerned about growing the array afterward. I would then have to grow the array, redefine the partition, and then grow the file system. The PITA factor goes up. Has anyone worked with both? Pro/Cons? My array was created with:
mdadm --create --verbose /dev/md0 --level=5 --force --raid-devices=3 /dev/sda1 /dev/sdb1 /dev/sdc1
FYI: I have backups. I understand RAID 1 may be a better choice of raid level.
View 3 Replies
View Related
Jan 24, 2010
Is there someone who knows how to create a RPM from netatalk 2.0.5. Or better has a URL to a RPM? I aske this because so fare I know there are no RPM's for opensuse 11.2 (or suse). I want to use this RPM in the susestudio this is because the version in the repositories don't work with snow leopard.
View 9 Replies
View Related
Aug 9, 2011
I'm running Ubuntu 11.04 x64
I upgraded to Netatalk 2.2 and I've hit a wall.
I'm authenticating netatalk with an external LDAP server but for some reason pam is confused.
Here's my output when I authenticate with the server:
CODE
I went searching for system-auth but it doesn't exist.
View 1 Replies
View Related
Jan 6, 2010
I would like to use my SuSE 11.2 1TB RAID server to backup my mac using time machine. I found several tutorials on the web for using netatalk over ssh, but all these tutorials are for Ubuntu and require the debian package. Has anybody compiled netatalk over ssh under SuSE? I cannot verify if the netatalk package installed by the SuSE installer has been compiled with this option. Alternatively could somebody point me to any documentation to help me compile netatalk? I tried reading the netatalk manual from sourceforge, but that asks for installation of a Berkley DB that is not required under Ubuntu.
View 7 Replies
View Related
Jul 30, 2011
I blindly upgraded my Mac OS X machine to Apple's newest OS version: 10.7 Lion. Unfortunately they upgraded their AFP implementation in such a way that now I cannot connect to my opensuse 11.4 box. However, that is quite essential for my TimeMachine backup to run over the network. Also, I can't quite go back to using samba for this because then timemachine will corrupt its own backup after a while. I tried NFS once, but that went a little over my head.
After a some googling, I came accross this blog that suggested a solution. I followed those steps, and behold I was even able to get the whole netatalk 2.2-beta4 thing to build correctly. However I couldn't get the afpd to run properly, since
Code: /etc/init.d/netatalk start did not seem to start the daemon in such a way that it actually opened a port (well, the latter is just a guess - os x told me it couldn't connect to the specified server, rather than that the server version was incorrect) Log-files didn't provide anything useful, and essentially I'd prefer it if I could install v2.2 via yast, rather than leaving traces of improperly configurated software all over my system.
The default OSS repository contains Netatalk 2.0.3. I need version 2.2. I've also been looking around the buildservice, but all i could find was a bunch of failed projects...
View 1 Replies
View Related
Jul 19, 2010
I have been using netatalk to use my old LaserWriter PS 4/600 with Kubuntu.verything was fine until I upgraded to Lucid.Now, when I go to restart netatalk, I get
Code:
user@machine:~$ sudo /etc/init.d/netatalk restart
Restarting Netatalk Daemons (this will take a while)Stopping Netatalk Daemons: afpd cnid_metad papd timelord
[code]....
View 3 Replies
View Related
Jun 27, 2011
Recently upgraded Ubuntu home server from 8.04 client to 10.04 server and reinstalled all services therein. One of them is a Netatalk daemon that I configured in a fashion similar to this website:[URL]inder recognizes my server and the afp service, yet when I attempt to log in (using valid credentials), Finder indicates its the wrong username and password. I've tried altering some of the config files and my Google-fu to look for solutions
View 1 Replies
View Related
Feb 24, 2011
I'm trying to upgrade netatalk to the latest version because my Time Machine gets corrupted when the volume reaches its max capacity. How do I do it? I uninstalled netatalk, downloaded the latest package, made configure, make, make install (without any errors, just some warnings), but netatalk doesn't seem to run. I can't connect to the shares. If I install netatalk 2.1.2 via synaptic everything starts to work again. How to upgrade netatalk to the latest version on ubuntu 10.10?
View 1 Replies
View Related
Dec 21, 2010
I am a user of version 2006 of Mandriva server and now I am upgrading to MES5. According to support, netatalk is no longer support by this version (at least in Brasil), and I still have some old Macs running System 9.2 and it is very important to have netatalk running at server. I download netatalk and followed the intructions showed at:[URl]...
I was able to follow the instruciont until step 5, executing ./bootstrap. Next, I should execute the next command: ./configure, but I got the message No such file or directory. There is no REAME file at the directory and the only configure file it has is configure.in, a 40kb file, plain text document, its first line says dnl configure.in for netatalk.
View 5 Replies
View Related
Sep 1, 2011
With Apple OS 10.6.* I was using samba for a network time machine with my natty box (mythbuntu) when 10.7 came out I had to change over to AFP. I am able to get the machine to do back ups, however when I try to enter the Star Wars screen, the network drive mounts, and nothing happens. I don't get any errors. I can go into my Time Machine folder, and I can see Backups.backupdb, I go in there and I see <mymachinesnetworkname>, but when I try to go into that folder I get permission errors. In terminal on the mac as sudo su - I see...
[Code]...
View 2 Replies
View Related
May 13, 2010
I have recently installed netatalk and avahi-daemon on my lucid server but, much to my chagrin, I have to run
Code:
restart avahi-daemon every time I boot to get the service to advertise.
both avahi-daemon and netatalk have been added to the appropriate runlevels.
View 9 Replies
View Related
Jan 8, 2011
Shortly after upgrading to Meerkat I discovered that my macbook timemachine backups became unreliable to the point of uselessness. After a bit of googling it appears that Meerkat's version of Netatalk (2.1.2) has some issues that bust timemachine. These issues are supposedly fixed in version 2.1.3. So... what is the best way for me to go about upgrading Netatalk past the official Meerkat release version?
The Netatalk project is at version 2.1.5. I could uninstall the Meerkat packages and just try to build Netatalk directly from source. However I'm a little leary about losing all of my existing AFPD filesystem meta-data. The Natty Narwhal repository appears to have version 2.1.4 which I've read should solve my problem. Is there any way to install the binaries from the Natty repositories? Can I download the source package from the Natty repositories and rebuild the package with Meerkat libraries/dependencies?
View 6 Replies
View Related
Mar 16, 2011
I would like to know if I use UBUNTU do I have to install workstation before I install the server? What is the best and easiest server software to install and operate? I hope you will forgive me for asking this type of question but this will be my first time to work with Linux. I got tired of windows home server and the problems with it.
View 5 Replies
View Related
Jul 13, 2010
I had intermittent disconnects from my netatalk fileserver, especially under i/o load.
View 1 Replies
View Related
Jan 4, 2009
I am using Exceed (the hummingbird) as an X emulator on my PC, I have X11 forwarding turned on in putty, and I have the DISPLAY environment variable set to the PC IP address + , like so DISPLAY=192.168.100.11:0. When I type startx, however, the Xsession starts at the console. How can I get it to come up on the PC?
View 1 Replies
View Related
Sep 29, 2009
The problem:
glxgears/glxinfo works on my PC vista laptop
glxgears/glxinfo works on my fedora 11 linux workstation
glxgears/glxinfo does not work when I SSH in from my PC or from other unix workstations. I need this to work so I can do relatively low-powered graphics work on the workstation remotely.
Other x-windows graphics/programs work fine.
The error message is uniformly:
I didn't install fedora (our sysadmin did), but he is out of ideas as to why this isn't working.
View 7 Replies
View Related
Jul 14, 2010
Is there a straight forward way to clone my F13 workstation for the purpose of setting up a new computer quickly? Looking for the best approach to pursue.
View 9 Replies
View Related
Mar 24, 2010
I can install 'VMware-Workstation-6.5.0-118166.i386.bundle' without problems, but when I try to run #vmware in my terminal I get:
This is what I have installed:
View 1 Replies
View Related
Jun 10, 2015
In vm workstation console resolution default is 640x480 ,and i want to change it to 1024x768.
In Debian7 , it can changed use vga=792 in /boot/grub/grub.cfg.
But in Debian8 use changed use vga=792 in /boot/grub/grub.cfg , screen will all black.
Although screen can't see anything , but it can connect through ssh normal.
I also tried GRUB_GFXMODE=1024x768,GRUBGFXPAYLOAD_LINUX=1024x768 in /etc/default/grub , it get same Result.
I don't know the problem is at VM workstation or Debian 8.
View 3 Replies
View Related
Nov 2, 2010
I have installed VMware Workstation 6.0.5 on OpenSUSE 11.3. When I run the vmware-config.p, I get the following prompts.
Your kernel was built with "gcc" version "4.5.0", while you are trying to use
"/usr/bin/gcc" version "4.5". This configuration is not recommended and VMware
Workstation may crash if you'll continue. Please try to use exactly same
compiler as one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.5" anyway? [no]
[Code]...
View 4 Replies
View Related
Jul 17, 2011
Howto secure a productive opensuse workstation? Have you virus scanner, for example clamav and rootkit scanner like rkhunter installed on a produktive opensuse workstation in your company?
View 1 Replies
View Related
