Is there someone who knows how to create a RPM from netatalk 2.0.5. Or better has a URL to a RPM? I aske this because so fare I know there are no RPM's for opensuse 11.2 (or suse). I want to use this RPM in the susestudio this is because the version in the repositories don't work with snow leopard.
View 9 RepliesI would like to use my SuSE 11.2 1TB RAID server to backup my mac using time machine. I found several tutorials on the web for using netatalk over ssh, but all these tutorials are for Ubuntu and require the debian package. Has anybody compiled netatalk over ssh under SuSE? I cannot verify if the netatalk package installed by the SuSE installer has been compiled with this option. Alternatively could somebody point me to any documentation to help me compile netatalk? I tried reading the netatalk manual from sourceforge, but that asks for installation of a Berkley DB that is not required under Ubuntu.
View 7 Replies View RelatedI blindly upgraded my Mac OS X machine to Apple's newest OS version: 10.7 Lion. Unfortunately they upgraded their AFP implementation in such a way that now I cannot connect to my opensuse 11.4 box. However, that is quite essential for my TimeMachine backup to run over the network. Also, I can't quite go back to using samba for this because then timemachine will corrupt its own backup after a while. I tried NFS once, but that went a little over my head.
After a some googling, I came accross this blog that suggested a solution. I followed those steps, and behold I was even able to get the whole netatalk 2.2-beta4 thing to build correctly. However I couldn't get the afpd to run properly, since
Code: /etc/init.d/netatalk start did not seem to start the daemon in such a way that it actually opened a port (well, the latter is just a guess - os x told me it couldn't connect to the specified server, rather than that the server version was incorrect) Log-files didn't provide anything useful, and essentially I'd prefer it if I could install v2.2 via yast, rather than leaving traces of improperly configurated software all over my system.
The default OSS repository contains Netatalk 2.0.3. I need version 2.2. I've also been looking around the buildservice, but all i could find was a bunch of failed projects...
I am having trouble with netatalk after rolling out 11.4 on my home server. I am using the same conf files from my previous 11.3 setup. I use netatalk for my macs as it tends to work better than samba.
I can access the afp volumes if I enter the full unc in finder (afp://server/data). The problem is that if I try to browse to the server via finder (click on the server icon) I get a connection fail. With 11.3 this would simply list out all available volumes.
I have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.
View 4 Replies View RelatedI have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedI'm on opensuse 11.4 (11.3 won't work with my monitor).
My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.
I also tried this command:
echo 1 > /proc/sys/net/ipv4/ip_forward
but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?
how to create network policy and system policy in opensuse11.4 and domain policies also???
View 1 Replies View RelatedI tried to build a PPP connection with umtsmon, but failed. I'm using a ZTE MF110 Stick. The reaction from my provider's support was succinct: "Linux untersttzen wir nicht." (We don't support Linux.)
The hardware seems to work fine, the stick shows a green light, and I sent a test SMS via umtsmon. The umtsmon interface successfully identifies my Provider, but does not connect.
Here is part of umtsmon debug output:
Code:
UIState::setState(6 -> 6)
##P4 t=133: ConnectionInfo:InhibitionCount ++, now is 1
##P3 t=133: TempSerialPort::TempSerialPort()
##P5 t=133: 0x75a6c0 = Query::setSerial(0x7fffece12a00)
##P3 t=134: Serial::openDev('/dev/ttyUSB2') as FD 8 - Serial instance
[Code].....
I cannot seem to create a tun device using ifconfig, even though the module is loaded, and the node tun is present in /dev/net and appears to have correct access permissions, trying to use nstx which requires the tun device. Only thing I can think of is adding an alias, but not sure where, since there is no /etc/modprobe.conf or /etc/modules.conf in SUSE 11.3.
View 2 Replies View RelatedI want to create a user on my opensuse 11.4 computer, for the sole purpuse of using it to access network shared data (eg samba, nfs, etc). This user must be in the "Users" group, but it must NOT be able to login directly on the computer, i dont want him to show up on the GDM users list at logon, he must not be able to login to a terminal, etc.
How can i add a user like that? must he belong to a specific group?
MySQL gets installed with root user by default, root user can administer every mysql database installed in the system. Question is how to create a new user that will not be able to administer all the databases in the system the way as root user is? Can it be done using webmin?
View 7 Replies View RelatedWe have a ldap server which has been running for a couple years now, and I was told to make a fallback / backup ldap server. So should the old one fail we won't be officially screwed.
View 1 Replies View RelatedI have a domain name relik.ath.cx with a mud and an html page and now Im working on my own personal mail server preferably with the first email on it [URL].
View 6 Replies View RelatedI had set up a Samba server on SuSE linux a few years ago with a single shared directory. It has been running fine ever since, surviving various system upgrades and hardware migrations without ever needing to change the configuration (well, maybe once or twice). However, since a few weeks ago, it refuses write access to the share. It just returns NT_STATUS_ACCESS_DENIED when I try to create or write to a file. That's also what /var/log/samba/log.smbd says (nothing more AFAICT). It's the same for all clients, i.e. remote Win XP PCs or local smbclient.
The funny thing is that it allows write access immediately after rebooting the server, but after a while (the next day or so) it refuses again. Restarting smbd or nmbd doesn't change anything here. I suspect that this started after installing the latest security updates for OpenSuSE 11.2 on May 17th. The new packages were (according to /var/log/zypper.log):
xorg-x11-libXext-2379.noarch
libmysqlclient-devel-2315.noarch
openSUSE-build-key-2398.noarch
libpython2_6-1_0-2213.noarch
libpng-devel-2159.noarch
Somehow I can't see which of these might have an influence on samba. But I am absolutely and positively sure that I didn't change anything else. I logged into the server only once in months, and all I did was doing the updates using the updater applet.
i want to create Central Opensuse repository for Patch management just like WSUS in windows,which automatically downloads Updates/Patches and distribute to the Clients locally.
View 1 Replies View RelatedI migrated from 11.0 to a new install of 11.3. Under 11.0 I was using Kinternet for a dialup connection through an external USB modem.Kinternet isn't available under 11.3, so I installed KPPP but haven't been able to get it to work. The modem and provider has been configured through YaST.At first with KPPP there was an error with permissions as a user. One old thread discussed how to fix this through chmod, which was successful for me.Now there is the error message 'Unable to create modem lock file'.Under configuration, use lock file is checked.
View 8 Replies View RelatedI get the error: Could not start process Unable to create io-slave: klauncher said: Unknown protocol 'magnet'.
View 3 Replies View RelatedHow to create the virtual web site (name based) accessible on http and https simultaneously ?
Example
server have ip address: 192.168.251.22 and virtual IP address=192.168.151.22
Target: create VirtualWebSite(name based) accessible on http and https simultaneously. ?
I can create a virtual site(name based), but he will be accessible ONLY on http or ONLY on https.
I am upgrading my linux server to Mandriva MES 5 server. Although its working fine (I can copy/delete/execute files from/to linux server), at mac workstation, at chooser, when I click on appletalk icon nothing happens. I have to click on Server IP address button and type my server IP, which is 192.168.0.123. Its is annoying and time consuming. I have to do this every time I want to access my server. At previously version, after I click on appletalk icon (at chooser), the server name comes up right away.
View 10 Replies View RelatedI'm running Ubuntu 11.04 x64
I upgraded to Netatalk 2.2 and I've hit a wall.
I'm authenticating netatalk with an external LDAP server but for some reason pam is confused.
Here's my output when I authenticate with the server:
CODE
I went searching for system-auth but it doesn't exist.
I have been using netatalk to use my old LaserWriter PS 4/600 with Kubuntu.verything was fine until I upgraded to Lucid.Now, when I go to restart netatalk, I get
Code:
user@machine:~$ sudo /etc/init.d/netatalk restart
Restarting Netatalk Daemons (this will take a while)Stopping Netatalk Daemons: afpd cnid_metad papd timelord
[code]....
Don't worry, I know - that title probably makes this question seem way more complicated than it actually is. Here's the situation: I have a server running SLES10 with a samba share set up on it. I created a username in Samba and Linux for myself, can access the share, permissions are fine, yadda yadda. Now I want to give about 100 more people access to it.
I have active directory running which users log into and I'd like them to be able to use their active directory passwords to authenticate to the share, rather than have me create 100 individual Samba/Linux accounts. In the future the AD server will be changing over to server 2008 but I'll cross that bridge when I get there. It would be equally effective if I could pull AD passwords from AD and "auto-create" the associated Linux/Samba users. Any ideas or could someone point in the right direction?
Recently upgraded Ubuntu home server from 8.04 client to 10.04 server and reinstalled all services therein. One of them is a Netatalk daemon that I configured in a fashion similar to this website:[URL]inder recognizes my server and the afp service, yet when I attempt to log in (using valid credentials), Finder indicates its the wrong username and password. I've tried altering some of the config files and my Google-fu to look for solutions
View 1 Replies View RelatedI'm trying to upgrade netatalk to the latest version because my Time Machine gets corrupted when the volume reaches its max capacity. How do I do it? I uninstalled netatalk, downloaded the latest package, made configure, make, make install (without any errors, just some warnings), but netatalk doesn't seem to run. I can't connect to the shares. If I install netatalk 2.1.2 via synaptic everything starts to work again. How to upgrade netatalk to the latest version on ubuntu 10.10?
View 1 Replies View RelatedI am a user of version 2006 of Mandriva server and now I am upgrading to MES5. According to support, netatalk is no longer support by this version (at least in Brasil), and I still have some old Macs running System 9.2 and it is very important to have netatalk running at server. I download netatalk and followed the intructions showed at:[URl]...
I was able to follow the instruciont until step 5, executing ./bootstrap. Next, I should execute the next command: ./configure, but I got the message No such file or directory. There is no REAME file at the directory and the only configure file it has is configure.in, a 40kb file, plain text document, its first line says dnl configure.in for netatalk.
Using Fedora 10, can anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.
View 2 Replies View RelatedCan anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.
View 4 Replies View RelatedWith Apple OS 10.6.* I was using samba for a network time machine with my natty box (mythbuntu) when 10.7 came out I had to change over to AFP. I am able to get the machine to do back ups, however when I try to enter the Star Wars screen, the network drive mounts, and nothing happens. I don't get any errors. I can go into my Time Machine folder, and I can see Backups.backupdb, I go in there and I see <mymachinesnetworkname>, but when I try to go into that folder I get permission errors. In terminal on the mac as sudo su - I see...
[Code]...
I have recently installed netatalk and avahi-daemon on my lucid server but, much to my chagrin, I have to run
Code:
restart avahi-daemon every time I boot to get the service to advertise.
both avahi-daemon and netatalk have been added to the appropriate runlevels.