Server :: Apache On :443 Only Or Find Another Free Port?
Jul 13, 2011
I want to run these services on these ports:- ssh:8080- shellinabox:80- squirrelmail via apache2 and SSL:443These appear to be the only ports I can generally connect to through various firewalls I encounter. If I try to get apache2 to not run on 80 shellinxabox appears to bind to it ok, but when I visit my site at port 80 via firefox I get apache instead. 1) How do I stop this and get shellinabox and apache2 working at the same time?2) How do I find another free port that isn't firewalled? All I have been trying is starting shellinabox on various ports and trying to connect and this is a very slow process
I'm running a server with Ubuntu 10.04 installed. I recently set up a VirtualHost (I'll call it my.website.com), like I have in the past without any problems. But this time, I'm stumped. When I connect to my.website.com, it should hit port 80, right? It doesn't; rather, it hits port 8000. I don't have any rewrites/redirections (I checked wherever possible) and checked apache2.conf (httpd.conf is empty).
I want to run a soft that is daemonized, and listens on port 6789. This soft is launched through a php page, so, by the apache user. The probl�me is that the apache user does not has rights to open / listen on a port. I tried to add apache user to the root group, but it won't help. In the application log, I have this every second :
[code]...
I tried to add apache user in the sudoers with a nopasswd but it's still a no go.
I just tried changed the port that apache runs on from 80 to 8080 (I need port 80 for a difference service so I am changing the apache port). After doing this I load 127.0.0.1:8080 in a browser and get a 404 error generated by apache, if I change it back to 80 it works fine.
I have a website example.com, serving pages on port 80. I want the url example.com/redmine to be rewritten to port 3000, where my redmine server is running, without actually changing the URL. So the user typing in example.com/redmine/test would serve up example.com:3000/test, without the user actually connecting through the port. I know this can work through CPanel, but I don't know exactly how it was implemented. I'm looked at how mod_proxy, mod_proxy_html, and mod_rewrite,
I am setting up Apache (Fedora 12) inside my home network. From inside my home network I access it without any problem. I need to set it up to access it from internet. I have the following questions. Here is temporary setup for testing purpose. Internet-->ADSL modem (SEIMENS Speed Stream 4200)---> Apache (Fedora 12)
1. Do I have to do any kind of ports forwarding on ADSL modem. (There is no option to do port forwarding on Modem) May be I need different Model of Modem?? 2. I tired to Ping my real IP for modem form another computer from internet. I am even unable to PING the ADSL 's real IP. Why it is that?
how to find the Apache web server on Ubuntu 9.04 and SmartPBX 1.2. I had found some guidelines from Internet to search for the Apache as following:
Apache config files are in /etc/apache no Apache log files are in /var/log/apache Apache libs are in /usr/lib/apache Other files can be in /usr/share/apache, /var/lib/apache
However, I cannot found the said files. What command should I type so that it will bring me to Apache folder? Another question, currently I has a website which can be run locally. But how can I configure the website so that it could run on Internet.
Top only show the memory usage for individual processes. Apache often runs hundreds of processes, each of which may use only a small amount of memory, however the total memory consumed by all apache processes can be fairly large.Is there a way to see the total memory usage for all apache processes?
I've got a question on free disk space. I'm currently running CentOS 5.5 on in Xenserver virtual environment. We've had an issue with disk space. My question is as follows: - from a ssh connection i run df -h this gives the value of 90% used leaving me with 9GB. If I use system monitor via a VNC connection the free disk space value is 20GB free on the same volume. Which one is correct? I do use SNMP to monitor the same volume and should alert me when < 10% is free I know this works as I set the alert threshold to < 90% I get an alert.
I have a web site on port 80. My apache works on port 8080. i configured cache_module in apache. so that the clients will enter the web site threw the apache and apache will gather all the cache of the web site in order to speed up the service. when i point apache to take content from port 80 - it works just fine. when i change it from port 80 to any other port, it gives an error: "failed to open stream: Permission denied in /var/www/web/cache/index.php on line 44" it works fine with port 80. so how come not other port? i will be glad to hear any suggestion.
Im trying to config my intranet to be accessible from inside the network (lan) without need of password and ask for a passwd for those who are viewing from Wan ....
Today my intranet can only be accessed from Lan, external access give me an Unauthorized message, I took look around, try #irc and still can get the appropriated help, I hope that someone here could help me on that...
I have a mail server i need it to send message via port 587 not port 25, i make some changes to my postfix server which i use and it is already successed making a telnet to 587 port like it :
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info: monitored server: CentOS 5.3 2.6.18-128.1.1.el5
I installed Ubuntu 9.10 and tomcat 6 java servlet container. I am trying to run the tomcat server on port 80, so I edited tomcat's configuration file (server.xml) and changed the default port from "8080" to "80". I launched tomcat server, went to my browser and entered:[url], but it says can not find server/location. Then I edit the server.xml and revert back to port "8080" and then enter: [url] and everything works fine. So my guess is some other service is taking up port 80, but I would think not, since I just installed Ubuntu and made sure apache isn't installed or running.
So I went to "System" --> "Administration", then choose "Network Tools". I then executed Netstat and did not see anything taking up port 80, but I do see port 8080 taken (assuming it is the tomcat server). Then I also did a Port Scan and entered my IP number. Again, I don't see port 80 taken, but do see 8080 being used.
I had a winxp laptop computer behind home wireless and was running tomcat 6 server fine with it, but it over-heated and died recently. So I got a used laptop and just installed Ubuntu 9.10. I have not changed my wireless router settings. It is the same as before. So I have ruled out my home's hardware/network equipment.
So here now I sit, wondering what is up?
For security reasons, is port 80 initially blocked by Ubuntu for some reason? Is there something I have to do beforehand to free up port 80?
I can't seem to get apache to work on a non default 80 port. I've got in to ports conf and changed it to the follwoing.
Code: # If you just change the port or add more ports here, you will likely also # have to change the VirtualHost statement in # /etc/apache2/sites-enabled/000-default # This is also true if you have upgraded from before 2.2.9-3 (i.e. from # Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and # README.Debian.gz
I have been struggling with this for the past two days and I can't seem to figure it out.SIMPLE GOAL: use subdomains with my wildcard Rapid SSL cert on Apahce2. This is not a chained certificate.Currently my default SSL virtual host, listening on 443 works fine. So, https://www.myDomain.com is recognized correctly by all browsers. But, the below virtual host listening on port 1025 is not coming across to the browser securely. The page renders, but the browsers do not see it as encrypted SSL.
I have a virtual server setup on port 80 that works fine, however, if I change the port to, say, 8080 the browser then fails to connect.I'm using webmin to configure everything, all the other settings seem to work as I would expect.I get the error "Safari canï open the page http://192.168.0.12:8080 because Safari cant connect to the server 192.168.0.1." in safari, and i get something similar on the xubuntu machine in firefox connecting via localhost.It's almost as though theres a firewall in the way, but I think it's more likely to be some config problem.
When we have Oracle 10g in RedHat, the free memory goes down soon after bootup of the system and never increases. I learnt from various forums that Linux does cache the disk files for the better performance. And when any application requires memory they get the memory and the caching does not block any memory. We want to capture the free memory available for one the harware planning activity.
1) When we use vmstat command, it gives very less free memory. since it caches large size files, the free memory is very low.
2) We tried free command, but how do we know how much actual free memory is available. i.e. excluding the cache usage
VERY new to linux, erm but I have an issue that needs solving!I recently moved to university, where their network blocks sftp port 22, this means that I cannot connect to my FTP server which is running a version of linux.Now I've got this ftp server connected to a seedbox and it was created using the following walk through..Code:I have written this guide for a friend, but I though it would be useful for others as well.
There are several guides floating around, but I found that most always cock up in some way. This one is tried and tested to work on Debian Etch (on an OVH rps, but should apply to most servers).If there is a new stable release of rtorrent/libtorrent then I will update this guide to show you how to update it (without reinstalling the whole server).
At the bottom there are also instructions to install ftp access & some network monitoring software.Basically, I would really like someone to be able to construct the commands on how to change the listen port for sftp connection on linux or add another port to the list that Linux would use so that I could put in through putty.
If I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
I have made out a little software as to talk with my friends through network . there are two parts : one is listening to receive messages ,the other will send messages. but the firewall is bothering .so I want to know if I can make my software listen to port 80 while apache is also running .
On Fedora 13 is there anywhere else on the system that I have to change to get Apache to Listen to an assigned port, something other than 80. Suppose for instance I wanted Apache to Listen on port 94. I told by the site that their router is forwarding apache to port 94. That doesn't mean I change the Listen in httpd.conf. correct. Apache is still expecting connection on port 80 but in this case 80 then gets forwarded in the router to 94. This is my understanding.
I have tried setting apache up on port 8000, because my ISP blocks port 80.
When I try to listen on just port 8000, I can never connect, internally or externally. When I try to listen on both 8000 and 80, my internal computers will drop the 8000 from the url and connect on 80, and external computers try to do the same thing, but can't get through on port 80.
I know my router is set up correctly, I have 80, 8000, and 8888 all being forwarded, I have confirmed with [URL] that 80 is blocked, but 8000 and 8888 are open. I am able to connect to gnump3d through port 8888 internally and externally, but not apache2 on port 8000.
netstat -tnap confirms that apache is running and listening on ports 80 and 8000 to all users.
My ISP Blocks port 80 so I changed the port to 8081 after I do this and restart Apache and use my IP with :8081 after I get a page saying Not Found The requested URL /index.html was not found on this server. I get this same message if I use my real IP or the IP from my router. What can be causing this?
