Server :: Apache Downloads Php File Instead Of Running Script?
May 13, 2010
I trashed my Karmic Ubuntu install and installed Lucid (I had heard that the boot times were much reduced and I didn't see any improvement in my normal upgrade). I reinstalled Drupal but find that my installation of Apache does not run the scripts, but rather passes the php text file to the browser. IIRC when I installed it apt configured Apache correctly without me having to edit .htaccess or /etc/apache2/httpd.conf which makes me think that I am missing a key dependency.
Does anyone know of a check list to which I can refer to make sure that I've installed everything? My installation has Postgres instead of MySQL. Failing which, in the event that my memory is faulty, where can I find which changes need to be applied to the configuration files above?
View 4 Replies
ADVERTISEMENT
Jun 23, 2010
I have a single CentOS server with two separate NIC's. I was asked to install an internal Wiki on Apache but have that dedicated to one NIC so it's internal only. Then have just a site running on Apache on the 2nd NIC which is externally accessible. I have never done anything like this and would like tonow how difficult this would be on a single stand alone server that I have above?
View 1 Replies
View Related
Feb 11, 2011
When I do " ps aux | grep apache " I can see that apache2 is running. But when I do the same thing for http or httpd there is nothing. I looked for this question in the forums but couldn't find it. I probably don't know just what to look for.I'm using the new Debian Squeeze, and was fooling around heavily with new software installations and modifications, and just noticed all of a sudden that I couldn't get on the internet - so I know I did something but don't know what.I can plug in a thumb drive with a bitnami joomla stack on it and run, " ~/tmp/joomla-1.6.0-0/./ctlscript.sh start "and that gets things going for the joomla stuff (apache, http, mysql, php), but that stuff is pretty self contained and does not effect the browser's attempt to reach the web.
View 12 Replies
View Related
Feb 25, 2010
I just did a fresh install of ubuntu 9.10 and install apache2 webserver with php5 and mysql, but for some reason I have no idea why but when upload files to the computer running apache2 webserver
http://69.242.228.170/ is the link to the ubuntu system It's not displaying the website correctly and it's not working on any pc on my network either, but it looks fine in dreamweaver when I was designing it on my laptop. list of all the files and folders in the /var/www path
Code:
root@requiem:/var/www# ls -lh
total 92K
-rwxr-xr-x 1 root root 446 2010-02-25 18:27 bg.gif
-rwxr-xr-x 1 root root 2.3K 2010-02-25 18:27 contact.php
-rwxr-xr-x 1 root root 143 2010-02-25 18:27 content_bg.gif
[Code]...
View 8 Replies
View Related
Apr 16, 2010
i have apache and mysql running, i can access my web server by visiting localhost on port 80 but for some reason when it doesnt work when i try using my ISP provided IP address... (it used to work).. i have my router setup with a DMZ on my LAN IP (my computers IP, this is the computer in my home network that serving with apache).. i also cant seem to shut down my mysql server (theres an update ive been trying to get) even when i use sudo...
View 5 Replies
View Related
Apr 5, 2011
I'm trying to modify an existing user so that any files they create can be at least read (although writing and execution would be nice) by any other user. The reason is because I need the daemon running my Apache server to be able to access files created by a daemon running under this user, files which will be created and accessed in real-time.
View 3 Replies
View Related
Aug 3, 2010
I set up my first web server and it works flawlessly -when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.
I have two network interfaces on my server, eth0 (public static IP connected to internet directly) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1. It is connected directly to the internet and serves as a SNAT for other comps on the lan.I added "192.168.1.1 www_server_com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.HOwever, the server itself only opens website if the address islhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www_server_com ( I cant use dots as I do not have more than 15 posts on the forum )Here is the firewall script I am using.
#!/bin/sh
#
# Example Firewall Script
[code]...
View 2 Replies
View Related
Oct 2, 2009
I am running Apache 2.2.3 on a CentOS release 5.3 (Final) with 100 Sites. I've notice that Apache is making my server Swap around 200 MBs.
"http://www.xxx.yyy.zzz/server-status" doesn't show me too much to, so I am looking the behavior of specific httpd process.
ProcessID "18753" is the one for "http://www.xxx.yyy.zzz/server-status" in my browser.
This command show me (In KBs) how much virtual memory is that specific process using:
# /etc/init.d/httpd start
# grep Private_Dirty /proc/18753/smaps | awk '{ print $2 }' | xargs ruby -e 'puts ARGV.inject { |i, j| i.to_i + j.to_i }'
3012
... Running this command a lot of times it gives me the same output, but suddenly...
# grep Private_Dirty /proc/18753/smaps | awk '{ print $2 }' | xargs ruby -e 'puts ARGV.inject { |i, j| i.to_i + j.to_i }'
21708
Something make that process (and all the others httpd process too) to use a lot more memory!
Part of my httpd.conf:
# Timeout 120
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 3
<IfModule prefork.c>
StartServers 5
MinSpareServers 5
MaxSpareServers 20
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 100
</IfModule>
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule> #
My server is running Mysql 5.1.34, vsftpd 2.0.5, BIND 9.3.4-P1 (as slave). I couldn't found anything running in the specific time that httpd processes start to use that much memory.
View 7 Replies
View Related
May 13, 2011
OS: Ubuntu Server x64 10.04 Apache: 2.2.14-5ubuntu8.4 I have a virtual server which has been running for months with no problems then one day I saw that it crashed and I had to power cycle it. Since then I have been unable to start Apache as it segfaults no matter options I give it. Before I try to reinstall Apache, why is this segfaulting?
Code:
execve("/usr/sbin/apache2", ["/usr/sbin/apache2"], [/* 21 vars */]) = 0
brk(0) = 0x7f9f48f8d000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9f47e0d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
[Code]...
View 2 Replies
View Related
Dec 10, 2010
I'm trying to get Apache to run in a user's home directory. I changed the conf file so that Apache runs under the user and group "kiosk" and changed the DocumentRoot and Directory from the default to "/home/kiosk". Then I set Apache to start at boot (chkconfig --level 235 httpd on) and rebooted. When I checked, httpd is running as kiosk like it should (ps aux | grep httpd). However, when I try wget localhost, I get a 403 response back. If as root I call "httpd -k stop" and then "httpd -k start", then everything works exactly as it should (curiously, if I try using "-k restart", it still doesn't work). After this, httpd still shows as running as kiosk and if I check before calling start, it shows no httpd processes running as expected.
This only happens when I use httpd to stop and then start the web server. If I try to restart using apachectl I still get a 403 error. As an interesting aside, after I've used httpd, if I try using "apachectl restart" I get a "(13)Permission denied: Error retrieving pid file run/httpd.pid" error. This is all on a freshly installed CentOS 5.5 server. Why I'm seeing this very different behaviour from what I thought were just equivalent ways of starting Apache? And then what I could do to get it to start up and run properly on boot? One last item to mention is this isn't a permissions problem. I set the permissions to 777 to both the home and kiosk directories (and 666 to the web files) just to be sure that's not the problem.
View 4 Replies
View Related
Jul 20, 2010
I am having a problem.I use Ubuntu 10.04 server edition.Two computers on LAN one with Public Ip A other with local (Class C IP)say it BWith a third computer in same subnet I can access a TomCat application running on B as http://Ip of B:8080/applicationI want to use A as a Reverse Proxy for this application to be reachable from internet.So on Googling I came across some thing known as mod_ajp I enabled that on my Server A asa2enmod proxya2enmod proxy_ajpa2enmod headersbut after that I am not able to understand as how do I define vhost to be able to forward HTTP request which come on A as www.myserver.com/appto B which I can see internally as http://Ip of B:8080/application so Tomcat on B handles this.
View 4 Replies
View Related
Aug 2, 2010
I am a newbie to linux of 4 weeks. I set up my first web server and it works flawlessly - when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.I have two network interfaces on my server, eth0 (public static IP connected to internet) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1
I added "192.168.1.1 www.server.com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.
HOwever, the server itself only opens website if the address is localhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www.server.com.I do not understand why the record in etc/hosts doesn't point it in the right direction. It seems that when I open address 192.168.1.1 it still gets routed to the external network. I have seen using DNAT to deal with the problem but it didn't work in my case (maybe I didn't do it correctly). I have spent whole evening/night trying to sort it out, it's 4AM now, going to bed frustrated and angry (at myself hahaha). Still like linux very much, won't be going to windows anymore. Please help
View 14 Replies
View Related
Mar 7, 2010
I installed LAMPP a couple of weeks ago and was working fine. Today when I try to start lampp, it will only start MySql and ProFTPD. It says "XAMPP: Another web server daemon is already running." How can I find out where this other server is located and stop it?
View 2 Replies
View Related
Apr 1, 2011
On my server I provide OCR file conversion service but the problem is when a user uploads a file and it's being converted then if you open another tab and try to load the site it won't respond until that conversion is completed. In other words until the PHP script finishes execution apace doesn't serve any other request to the same browser.
Here is my apache configuration:
Code:
ServerTokens OS
ServerRoot "/etc/httpd"
PidFile run/httpd.pid
[code]....
You can check what I mean if you try to upload and convert a file and while the file is converting try opening the site in another tab.
View 2 Replies
View Related
Jul 9, 2010
I just installed Apache2 and PHP on my computer but everytime I go to my localhost folder (ex: http://localhost/test/), firefox starts to download the index.php instead of running it. This doesn't happen in Chrome.
View 3 Replies
View Related
Oct 24, 2010
When I'm running without a desktop environment, whenever I click a download in Chromium to open it it downloads another copy instead of opening it in an appropriate program! How do I stop this? Also, what if I just want to view a PDF and not download it to my home dir?
View 5 Replies
View Related
Jun 7, 2010
a reverse proxy scenario
Code:
Server A Server B (Zope Application)
Public IP 192.168.1.5
On the first one that is A in Apache vhost file I made
Code:
ProxyPass / http://192.168.1.5:8080/VirtualHostBase/http/192.168.1.5:8080/virtual_hosting/VirtualHostRoot/eduCommons
ProxyPassReverse / http://192.168.1.5:8080/VirtualHostBase/http/192.168.1.5:8080/virtual_hosting/VirtualHostRoot/eduCommons
but the CSS and images on internet which people are accessing are broken while it is running perfectly fine if I access on LAN.
Code:
[URL]
I have checked the documentation page and here also but still the problem persists.Also on LAN if the same is accessed like this
Code:
[URL] then CSS and Java script is broken. It is an eduCommons CMS. Which I am trying to access via internet.
View 1 Replies
View Related
Jun 9, 2010
I'm trying to send files from a Unix server using http/curl to a Linux webserver running Apache. I get the following PUT error message when and the file does not send:
<title>405 Method Not Allowed</title>
</head><body>
<h1>Method Not Allowed</h1>
<p>The requested method PUT is not allowed for the URL
View 2 Replies
View Related
Mar 21, 2011
I have install Mandriva 2009 and install apache server but its not strating on default configuration file . What I should do for starting apache . i have tried /etc/init.d/httpd start but apache is not running .
View 1 Replies
View Related
Aug 19, 2009
I installed Apache server with Debian 5.0.2 Lenny. I am trying to write a script which would analysis web log files. I found the log files on /var/log/apache2. There is an access log file, `access.log`. My question is what configuration file determines the location and the name of the access log file. How can I change them? I used CustomLog in /etc/apache2/apache2.conf like below.LogFormat ": %h %l %u %t "%r" %>s %b" common
CustomLog /home/test/my_log_file common Apache2 generated /home/test/my_log_file. But no logs were written in the file even after I run `/etc/init.d/apache2 restart`. Ichanged the log file location. It still didn't work. However, Apache2 still wrote logs in the file `/var/log/apache2/access.log`
View 1 Replies
View Related
Jun 14, 2010
I am having problems with scp during a backup operationI added a ps -ef before and after the scp operation used during the backup.The backup is a script to backup a Zimbra ServerI am including the code segment that I am having problems
Code:
# DRCP Section. To scp newly created archives to a remote system
if [ "$DRCP" = "yes" ]
[code]...
View 3 Replies
View Related
Nov 6, 2009
it may be a simple doubt i have but i really want to know this,in the httpd.conf file under the server root of apache server.they have instructed not to add a slash at the end when mentioning or giving the path for server root.I think both will still remain the same, then y is that mentioned that way?
View 6 Replies
View Related
Mar 3, 2010
I have a dozen huge folders loaded with files (images, and so..).. I was wondering if Apache marks the files it accesses..
Thus, in case I want to delete files which haven't been accessed or surfed for a long time.. is that possible?
View 8 Replies
View Related
Jul 27, 2010
I'm wondering how I can enable LDAP support for my Ubuntu 10.04 LTS server running Apache 2 and PHP 5.3.2? What I'm trying to do is allow users on my existing company's LDAP system to login to my Elgg site automatically (and possibly have their details filled automatically).
View 1 Replies
View Related
Sep 25, 2010
I have a VPS that has 512MB of ram. I'm using it as a mail/web server. It keeps running out of memory. I know amavis/clamav are memory hogs, but I checked my ps aux and found 100's of instances of "apache-init-server" running. I killed them all, and they keep spawning back. What could be causing this. I've never seen this on a webserver before. OS: CentOS 5.5
View 10 Replies
View Related
Dec 16, 2010
I created VirtualHost in apache configuration file.
Code:
NameVirtualHost 77.79.13.20:80
<VirtualHost 77.79.13.20:80>
DocumentRoot "/var/www/host"
ServerName host.t2p.lt
</VirtualHost>
[Code]...
View 1 Replies
View Related
Sep 22, 2010
I am trying to set up an ampache server using apache as the webserver. The instructions have the following line as one of the requirments: Your webserver has read access to the /sql/ampache.sql file and the /config/ampache.cfg.php.dist file..I have essentially zero experience with apache, and I'm not sure how to grant read access to a file.
View 1 Replies
View Related
Oct 14, 2010
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
View 7 Replies
View Related
Aug 4, 2010
what is the role of /etc/sysconfig/httpd configuration file in apache server .
View 2 Replies
View Related
May 23, 2010
Quite often I need someone to transfer a file to my laptop, and it's often different OS to different OS, and setting file-sharing, sshd/ssh, ftpd/ftp, and whatever else not is often not worth it. A USB key is also not always handy or big enough.
But, it's easy to be on the same network, just hard to get service working on top of it in less than 3 minutes if you've never dealt with that person's computer before.
What I was thinking would be the simplest thing would be if I could run apache, and have a very simple web script that simply allows file uploads. Something that would serve a web page that has a "choose file" button which brings up the file dialog, pretty standard I guess. I wouldn't say no to a few more functions on top of that.
Given that, does anyone know of a simple apache modules, or a web server script (language doesn't matter) that would allow for this?
View 2 Replies
View Related
