I installed LAMPP a couple of weeks ago and was working fine. Today when I try to start lampp, it will only start MySql and ProFTPD. It says "XAMPP: Another web server daemon is already running." How can I find out where this other server is located and stop it?
View 2 Replies
I'm trying to modify an existing user so that any files they create can be at least read (although writing and execution would be nice) by any other user. The reason is because I need the daemon running my Apache server to be able to access files created by a daemon running under this user, files which will be created and accessed in real-time.
View 3 Replies View RelatedI have ubuntu 9.10, and installed the latest lampp with default options. Apache/Mysql/Proftpd would start and stop fine. I then did:
...which I got from here...[url] Although I'm pretty sure I was never prompted for the mySQL password. At any rate, now mySQL will not start (Apache and ProFTP are OK). Where can I start debugging this? Where is the conf file for mySQL?
I configure my apache and can run http://localhost. There "I see it works!" but if I try to stop apache I get message that httpd is not started. I run
apachectl start - ok
but when I run apachectl stop it says "httpd (no pid file) not running"
I need to stop apache, because this is my dev machine and I want to start apache only when I make changes to my site. I am with slackware13.
I Bought A New Centos VPS,Not Much Details Are Provided About Setup Etc..I Wanted To Check If FTP Service Is Running Or Not And Which FTP Daemon Is Running.(Is There Any FTP Daemon Pre-Installed With Centos)
View 6 Replies View RelatedI had xampp going, but it got messed up and mysql wouldn't start. I thought reinstalling wou;d fix it, but it didn't.
when i do:
Code:
sudo /opt/lampp/lampp start
i get:
Code:
Starting XAMPP for Linux 1.7.3a...
[Code]....
I'm trying to install ispCP and i need to start mysqld but it won't seem to start. I'm somewhat of a nooblet to linux (have a year of VPS 'experience', but nothing too fance) so bear with me.
When i run "service mysqld start" it fails with the error: "MySQL Daemon failed to start."
I ran: "tail -n 30 /var/log/mysqld.log" and this is the output;
[root@dragon575 mysql]# tail -n 30 /var/log/mysqld.log
110726 16:03:10 InnoDB: Completed initialization of buffer pool
110726 16:03:10 InnoDB: highest supported file format is Barracuda.
110726 16:03:10 InnoDB: 1.1.8 started; log sequence number 1588761
110726 16:03:10 [ERROR] Aborting
[Code].....
My problem now is that lsyncd does not automatically start if the server reboots. I need lsyncd to start automatically also using the --delay 5 option.
I've had trouble finding any info on this other that some Japanese sites (I cant read japanese) using chkconfig, although it didn't work as I think chkconfig is depreciated anyway.
I have a VPS running on centos-5-x86 and mysql server went down two days ago this is my mysql server log
110602 18:28:09 mysqld started
InnoDB: The log sequence number in ibdata files does not match
InnoDB: the log sequence number in the ib_logfiles!
110602 18:28:14 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
[Code]...
I have installed version of ntop 4.0.3 by guide.But I can't start ntop daemon/service. I didn't find a service file for starting.During the installation there was no problem only want to RRDTool so I installed that. Now there is no necessary package required.
View 1 Replies View RelatedHow would you use chkconfig to set the bigd daemon to start at runlevels 2 & 3?
View 3 Replies View RelatedWe want to build a couple internal web apps for about 150 people to use, maybe 10 concurrently of any one app/site. LAMPP seems to be pretty simple to use for all it does, but their website has the following disclaimer at the bottom of this post, and there's some people here, programmers who like to make things way more intense/"cool" for programmers than they need to be for a small shop, who agrue that it shouldn't be used in production. I'm not really sure our internal 150 people classify as the type of "production" they are referring to below, I think they more mean a public facing site. We're never going to grow any bigger than this people-wise, or ever make these public facing sites. Just looking for some advice, as lampp seems very easy to use, as well as easy to backup and restore the entire lampp folder and get going on another server quickly in the event of a disaster.
As mentioned before, XAMPP is not meant for production use but only for developers in a development environment. The way XAMPP is configured is to be open as possible and allowing the developer anything he/she wants. For development environments this is great but in a production environment it could be fatal.
I inherited a project that someone built in lampp, and I need create new SSL certs.
So I go to do so and it says that OpenSSL is not installed and to apt-get and install it.(Ubuntu by the way)
So before I did so, I wondered if it would cause any problems...since it was supposed to be part of the lampp stack.
I have fedora version 8 with mysql 5.0.45 installed. I have also installed drupal. Recently drupal gave me an error "error code 28". When i checked it out it seemed to be with the db. When i tried to created a db (for testing purposes) in root...i wasn't able to. so then i tried to restart mysql ...it stopped but unfortunately i have not been able to get mysql back up...i get a message saying
"Timeout error occurred trying to start MySql Daemon".
I have a single CentOS server with two separate NIC's. I was asked to install an internal Wiki on Apache but have that dedicated to one NIC so it's internal only. Then have just a site running on Apache on the 2nd NIC which is externally accessible. I have never done anything like this and would like tonow how difficult this would be on a single stand alone server that I have above?
View 1 Replies View RelatedWhen I do " ps aux | grep apache " I can see that apache2 is running. But when I do the same thing for http or httpd there is nothing. I looked for this question in the forums but couldn't find it. I probably don't know just what to look for.I'm using the new Debian Squeeze, and was fooling around heavily with new software installations and modifications, and just noticed all of a sudden that I couldn't get on the internet - so I know I did something but don't know what.I can plug in a thumb drive with a bitnami joomla stack on it and run, " ~/tmp/joomla-1.6.0-0/./ctlscript.sh start "and that gets things going for the joomla stuff (apache, http, mysql, php), but that stuff is pretty self contained and does not effect the browser's attempt to reach the web.
View 12 Replies View RelatedI just did a fresh install of ubuntu 9.10 and install apache2 webserver with php5 and mysql, but for some reason I have no idea why but when upload files to the computer running apache2 webserver
http://69.242.228.170/ is the link to the ubuntu system It's not displaying the website correctly and it's not working on any pc on my network either, but it looks fine in dreamweaver when I was designing it on my laptop. list of all the files and folders in the /var/www path
Code:
root@requiem:/var/www# ls -lh
total 92K
-rwxr-xr-x 1 root root 446 2010-02-25 18:27 bg.gif
-rwxr-xr-x 1 root root 2.3K 2010-02-25 18:27 contact.php
-rwxr-xr-x 1 root root 143 2010-02-25 18:27 content_bg.gif
[Code]...
I need to allow certain users (who do not have root access) to be able to stop and start specific daemons
View 2 Replies View RelatedWhen I want to start nfs services ,I get this error, Starting NFS daemon: [FAILED]
View 1 Replies View Relatedi have apache and mysql running, i can access my web server by visiting localhost on port 80 but for some reason when it doesnt work when i try using my ISP provided IP address... (it used to work).. i have my router setup with a DMZ on my LAN IP (my computers IP, this is the computer in my home network that serving with apache).. i also cant seem to shut down my mysql server (theres an update ive been trying to get) even when i use sudo...
View 5 Replies View RelatedI set up my first web server and it works flawlessly -when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.
I have two network interfaces on my server, eth0 (public static IP connected to internet directly) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1. It is connected directly to the internet and serves as a SNAT for other comps on the lan.I added "192.168.1.1 www_server_com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.HOwever, the server itself only opens website if the address islhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www_server_com ( I cant use dots as I do not have more than 15 posts on the forum )Here is the firewall script I am using.
#!/bin/sh
#
# Example Firewall Script
[code]...
I am running Apache 2.2.3 on a CentOS release 5.3 (Final) with 100 Sites. I've notice that Apache is making my server Swap around 200 MBs.
"http://www.xxx.yyy.zzz/server-status" doesn't show me too much to, so I am looking the behavior of specific httpd process.
ProcessID "18753" is the one for "http://www.xxx.yyy.zzz/server-status" in my browser.
This command show me (In KBs) how much virtual memory is that specific process using:
# /etc/init.d/httpd start
# grep Private_Dirty /proc/18753/smaps | awk '{ print $2 }' | xargs ruby -e 'puts ARGV.inject { |i, j| i.to_i + j.to_i }'
3012
... Running this command a lot of times it gives me the same output, but suddenly...
# grep Private_Dirty /proc/18753/smaps | awk '{ print $2 }' | xargs ruby -e 'puts ARGV.inject { |i, j| i.to_i + j.to_i }'
21708
Something make that process (and all the others httpd process too) to use a lot more memory!
Part of my httpd.conf:
# Timeout 120
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 3
<IfModule prefork.c>
StartServers 5
MinSpareServers 5
MaxSpareServers 20
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 100
</IfModule>
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule> #
My server is running Mysql 5.1.34, vsftpd 2.0.5, BIND 9.3.4-P1 (as slave). I couldn't found anything running in the specific time that httpd processes start to use that much memory.
I trashed my Karmic Ubuntu install and installed Lucid (I had heard that the boot times were much reduced and I didn't see any improvement in my normal upgrade). I reinstalled Drupal but find that my installation of Apache does not run the scripts, but rather passes the php text file to the browser. IIRC when I installed it apt configured Apache correctly without me having to edit .htaccess or /etc/apache2/httpd.conf which makes me think that I am missing a key dependency.
Does anyone know of a check list to which I can refer to make sure that I've installed everything? My installation has Postgres instead of MySQL. Failing which, in the event that my memory is faulty, where can I find which changes need to be applied to the configuration files above?
OS: Ubuntu Server x64 10.04 Apache: 2.2.14-5ubuntu8.4 I have a virtual server which has been running for months with no problems then one day I saw that it crashed and I had to power cycle it. Since then I have been unable to start Apache as it segfaults no matter options I give it. Before I try to reinstall Apache, why is this segfaulting?
Code:
execve("/usr/sbin/apache2", ["/usr/sbin/apache2"], [/* 21 vars */]) = 0
brk(0) = 0x7f9f48f8d000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9f47e0d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
[Code]...
I'm trying to get Apache to run in a user's home directory. I changed the conf file so that Apache runs under the user and group "kiosk" and changed the DocumentRoot and Directory from the default to "/home/kiosk". Then I set Apache to start at boot (chkconfig --level 235 httpd on) and rebooted. When I checked, httpd is running as kiosk like it should (ps aux | grep httpd). However, when I try wget localhost, I get a 403 response back. If as root I call "httpd -k stop" and then "httpd -k start", then everything works exactly as it should (curiously, if I try using "-k restart", it still doesn't work). After this, httpd still shows as running as kiosk and if I check before calling start, it shows no httpd processes running as expected.
This only happens when I use httpd to stop and then start the web server. If I try to restart using apachectl I still get a 403 error. As an interesting aside, after I've used httpd, if I try using "apachectl restart" I get a "(13)Permission denied: Error retrieving pid file run/httpd.pid" error. This is all on a freshly installed CentOS 5.5 server. Why I'm seeing this very different behaviour from what I thought were just equivalent ways of starting Apache? And then what I could do to get it to start up and run properly on boot? One last item to mention is this isn't a permissions problem. I set the permissions to 777 to both the home and kiosk directories (and 666 to the web files) just to be sure that's not the problem.
I am having a problem.I use Ubuntu 10.04 server edition.Two computers on LAN one with Public Ip A other with local (Class C IP)say it BWith a third computer in same subnet I can access a TomCat application running on B as http://Ip of B:8080/applicationI want to use A as a Reverse Proxy for this application to be reachable from internet.So on Googling I came across some thing known as mod_ajp I enabled that on my Server A asa2enmod proxya2enmod proxy_ajpa2enmod headersbut after that I am not able to understand as how do I define vhost to be able to forward HTTP request which come on A as www.myserver.com/appto B which I can see internally as http://Ip of B:8080/application so Tomcat on B handles this.
View 4 Replies View RelatedI am a newbie to linux of 4 weeks. I set up my first web server and it works flawlessly - when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.I have two network interfaces on my server, eth0 (public static IP connected to internet) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1
I added "192.168.1.1 www.server.com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.
HOwever, the server itself only opens website if the address is localhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www.server.com.I do not understand why the record in etc/hosts doesn't point it in the right direction. It seems that when I open address 192.168.1.1 it still gets routed to the external network. I have seen using DNAT to deal with the problem but it didn't work in my case (maybe I didn't do it correctly). I have spent whole evening/night trying to sort it out, it's 4AM now, going to bed frustrated and angry (at myself hahaha). Still like linux very much, won't be going to windows anymore. Please help
On my server I provide OCR file conversion service but the problem is when a user uploads a file and it's being converted then if you open another tab and try to load the site it won't respond until that conversion is completed. In other words until the PHP script finishes execution apace doesn't serve any other request to the same browser.
Here is my apache configuration:
Code:
ServerTokens OS
ServerRoot "/etc/httpd"
PidFile run/httpd.pid
[code]....
You can check what I mean if you try to upload and convert a file and while the file is converting try opening the site in another tab.
My apache server don't want to start by itself on boot.
View 9 Replies View RelatedBeen a very long time since I have played with Linux.Now in a new position and have setup a Nagios server running on Centos 5,5 for a NMS.How do I set apache that when I visit: whatever.org it starts Nagios.. Currently I have to go to whatever.org/nagios.
View 9 Replies View Related
