I have install Mandriva 2009 and install apache server but its not strating on default configuration file . What I should do for starting apache . i have tried /etc/init.d/httpd start but apache is not running .
View 1 Replies
I created VirtualHost in apache configuration file.
Code:
NameVirtualHost 77.79.13.20:80
<VirtualHost 77.79.13.20:80>
DocumentRoot "/var/www/host"
ServerName host.t2p.lt
</VirtualHost>
[Code]...
cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
I installed Apache server with Debian 5.0.2 Lenny. I am trying to write a script which would analysis web log files. I found the log files on /var/log/apache2. There is an access log file, `access.log`. My question is what configuration file determines the location and the name of the access log file. How can I change them? I used CustomLog in /etc/apache2/apache2.conf like below.LogFormat ": %h %l %u %t "%r" %>s %b" common
CustomLog /home/test/my_log_file common Apache2 generated /home/test/my_log_file. But no logs were written in the file even after I run `/etc/init.d/apache2 restart`. Ichanged the log file location. It still didn't work. However, Apache2 still wrote logs in the file `/var/log/apache2/access.log`
I've set up Apache once or twice in the past, but my memory is escaping me on something simple. This time the OS is Cent5 with Apache/2.2.3
When a user browses to: [url] <nothing else> I get as expected, a '403 'You don't have permission to access' because directory browsing is off for obvious reasons :-) If I enter the full URL to the script: [url]it works as expected. No issues there.
What I would *like* to do (and I'm sure I've done this before) is to set the cgi-bin up so if someone leaves off the script name: http://host.name/cgi-bin/ it serves "index.cgi" pretty much in the same way that if you browse to the root http directory, you index.html||php would normally serve. I just can't remember how to achieve this simple thing and I'm starting to wonder 'am I mad? - Did I do this before?'.
Sanity check - index.cgi exists and runs if you call it directly thus:
Code:
I have added:
Code:
That made no difference.
Tried:
Code:
For good measure, but that made no difference - and even
Code:
and no amount of playing with 'Options Indexes || -Indexes || +Indexes' helped me.
Like I say, I'm sure I've done it before (on Debian/Ubuntu) without the need to start playing with redirects or .htaccess - but I'll be blowed if I can remember how.
it may be a simple doubt i have but i really want to know this,in the httpd.conf file under the server root of apache server.they have instructed not to add a slash at the end when mentioning or giving the path for server root.I think both will still remain the same, then y is that mentioned that way?
View 6 Replies View RelatedI am configuring apche on rhel5, I got default page successfully, and virtual page too, when I keep only one file index.html in virtual folder it goes well, that file opens correctly, but when I keep other html files except index.html server shows default page again.
View 2 Replies View RelatedI am now using CentOS5 as the server providing Apache services. I have managed to setup the web page under /home/user1/public_html, now I wish to change the default web page of our server to /home/user1/public_html. i tried to modify httpd.conf, in which i changed the "/var/www/" to the above user directory, but didnot work. Please kindly suggest.
View 9 Replies View RelatedI'm trying to set up a PXE boot server on a PC running Slackware 13.0 using the default apps and info shipped with that Slackware version but to no avail...Carefully reading the Slackware 13.0 README_PXE I've put together this dhcpd.conf file:
# dhcpd.conf
#
# Configuration file for ISC dhcpd (see 'man dhcpd.conf')
[code]....
I have apache running on my server, and also Zoneminder, a surveillance system running on the same machine. Both services runs without glitches, and I think apache's config as well as ZM's config are fine. I am not sure I understand how apache (not to mention the whole thing zoneminder, apache, web browser...) works. Pretty hard to manage when you dont know what you are doing. Also, when I try the supposed to work zoneminder webpage in my web browser, I get nothing (a blank page), or sometimes a "Not found" error message. The latest seems to be from apache because it is the same font as the "It works!" message when I try http://localhost:80
The only bit of information I have so far is in the apache error log (/var/log/httpd/error_log) and it says:
Code:
[Sun Mar 21 00:35:14 2010] [error] [client 192.168.0.100] script '/srv/httpd/htdocs/zm.php' not found or unable to stat
[Sun Mar 21 00:46:04 2010] [error] [client 127.0.0.1] File does not exist: /srv/httpd/htdocs/zm
It seems that the "zm.php" is missing.... That would be why Apache cant find the page?
If any one knows about Apache-Tomcat installation.
View 5 Replies View Relatedi have several sites hosted on one machine (Apache 2.2 on Debian). They are configured at /etc/apache2/sites-available/ with this configuration (part of it):
RewriteMap lowercase int:tolower
RewriteRule ^(.+) ${lowercase:%{SERVER_NAME}}$1 [C]
RewriteRule ^(([^./]+.)?site1.com)/(.*) /www/site1.com/www/root/$3 [L]
RewriteRule ^(([^./]+.)?site2.com)/(.*) /www/site2.com/www/root/$3 [L]
RewriteRule ^(([^./]+.)?site3.com)/(.*) /www/site3.com/www/root/$3 [L]
RewriteRule ^(([^./]+.)?site4.com)/(.*) /www/site4.com/www/root/$3 [L]
[Code]...
CentOS 5.5 + Apache 2.2(httpd.conf) + SSL confiuguration(ssl.conf) gives following error in FireFox.Secure connection failed.An error occured during a connection to localhost.SSL received a record that exceeded the maximum possible length.Errorcode:s_error_rx_record_too_longThe page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
View 1 Replies View RelatedI am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
I have installed latest Nagios and Nagios plugins. Nagios is working properly, but when I go to the browser n write the www.server-name.com/nagios, it gives
Not Found
The requested URL /nagios/ was not found on this server. How can I tell Apache to open Nagios on adding /nagios in my URL.
I need to tune the mysql and apache server for the comparatively busy webserver. My scenario is like this.
1. The Web request is around 2000 request at a time or more.
2. Each web request will generate one mysql query.
3. The query to database is all read.
4. This server load will be at peak for around 3-4 hours after that the load will subside. As the task will be published, around 300,000 will be viewing the page.
5 quad servers are deployed, load is balanced via DNS but performance is not as expected. Centos 5.5 is used as OS. Top command shows The mysql process is around 185%!
I have server with Debian and Apache installed. Webpage content located in /var/www folder. For failserver I have Windows server 2003, which runs Mysql service thats needed for library software. And on this machine theres Inetpub/wwwroot with library webcontent. Sofar its only accessible localy. How can make Apche webserver to take content from this local server machine and show it publicly.
View 14 Replies View RelatedI have to run multiple instances of apache on the same physical machine, as we have different OAM policies for different domains.is in the httpd.conf file can I have ServerName same in two instances of apache, like
ServerName: prod_machine (actual machine name)
In the vhconf files I do have different servernames for virtual hosts. Apache instances are running on same IP but different ports. I am including various vhost files in the main httpd.conf file. Can I skip servername in the main httpd.conf file and include different servernames in the virutal hosts configs. OS: Solaris10
Just setup an Apache2 server, and I would like to setup a login. I also wanted to use the same method that is setup for vsftpd For vsftpd I've created a mysql database.... structured as:
Code:
mysql> use vsftpd
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
mysql> describe accounts;
[Code]...
I try to fix bugs on my web server. The remote web server allows redirects to arbitrary domains. Description : The remote web server is configured to redirect users using a HTTP 302, 303 or 307 response. However, the server can redirect to a domain that includes components included in the original request. A remote attacker could exploit this by crafting a URL which appears to resolve to the remote server, but redirects to a malicious location.
View 1 Replies View RelatedI have messed around with yum config files & my system is not updating anymore! is there is a way to reset yum configuration to its default?
View 4 Replies View RelatedI'm trying to write shell script to use etc/init.d In fact, my application has written by java and I have made the fat.jar (etest.jar)file as executable one and after I wrote the small script to run it background (etestruner.sh) that is,
Code:
#!/bin/sh
java -jar /root/les/run/etest.jar >/opt/etstout.out 2>&1 &
And after I wrote the service script That is ,
Code:
#!/bin/sh
#
# Startup script for epict
#
# chkconfig: 2345 25 88
[code]....
I tried with google to solve this issue but did not get any result.
How to best manage both http and https pages on the same apache-server without conflicts. For example, if i have both 000-default.conf and 000-default-ssl.conf pointing to mydomain.com, and don't want users who visit mydomain.com without specifically type the https-prefix to be redirected to the https-page - how to handle users using browserplugins such as https-everywhere etc?
Another option would be to create a subdomain ssl.mudomain.com and have users who want to reach the ssl site to have to type ssl. I have tested several things with https everywhere enabled in my own browser, and it seems really hard to make this working the way i want, in one way or another i always end up getting redirected to the ssl-site automatically.
The reason i need this to work is because i run one site that i don't care much about SSL, that is the "official" part of that site, and i also host some things for friends and family on the SSL-part. This would not have been a problem if it wasn't that i use self-signed certificates for my ssl-site and the major user become afraid when a certificate-warning pops up in their browser and therefor leave the site.
I'm using CFEngine 2.2.8 to configure a network of Debian servers, the servers have two interfaces eth0 and eth1, how can I configure cfagent to take as the default interface eth1? eth0 is the internal interface and eht1 is the one with the public IP, I need to define classes based on lists of public IPs and it would be really helpfull if I could use functions as IPRange that only consider IP in eth0 interface.
View 1 Replies View RelatedI'm running a linux cloud server with the following config
1.2ghz Processor allocation
752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
Httpd.conf
Timeout 20
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
code....
I want to restrict the access to my local web server by IP address. Im in a LAN (192.168.200.xx) so i have this:
[code]....
But when i try to connect from 192.168.200.4 it says i don't have permission to access
I have installed a linux server in my office to run 16 machines. Its main use will be a internal mail server but will be also running websites.
I have installed Ubuntu 9.10 server x64 and have got apache running.
I am looking for the simplest more robust solution for smtp, pop3 and imap. I have only ever used qmail before and found it a pain to configure and its getting old so I though I should probably try something new. I have not much experience with running pop3 or imap on linux so would love a suggestion on that.
I have a dozen huge folders loaded with files (images, and so..).. I was wondering if Apache marks the files it accesses..
Thus, in case I want to delete files which haven't been accessed or surfed for a long time.. is that possible?
I need to find the list of file being tagged by user jack starting from a given date.Eg:Tag Name:lcc_dev_p1User: jackDate: >= 2011-03-02can some done tell me what is the cvs command for this.Should the below command give the correct outputcvs log -R -S -N -rlcc_dev_p1 -d">=2011-03-13" -wjack > /tmp/output.txt
View 1 Replies View RelatedI'm currently upgrading my clients' CentOS 5 installation to use httpd-2.2.14 as we need it for the server to past some of the Hardware checks used in the PCI [Payment Card Industry] security test. I was basically wondering if anyone had the standard CentOS 'configure options' for building httpd/Apache so I could copy them to ensure it is a straight replacement for my existing 2.2.3?
[Code]...
