Server :: APACHE VirtualHost Not Working On Older Slackware Machine
Jan 25, 2010
I am trying to add a virtual host to my machine by name to the IP here.It absolutely refuses to work.it is a mess server I hope to upgrade soon, but it has 2 versions of apache running together on it.The first one (php3) just proxies all the requests from 80 to 8080 which has another instance of apache running php5.I don't know what else to do, it keeps defaulting to the host header error virtual host.
View 1 Replies
ADVERTISEMENT
Nov 3, 2010
I have figured out how to use virtualhost, proxypass and proxypassreverse. So far, so good.
The problem I'm experiencing is this:
I have a reverse proxy server running apache (123.123.123.123)
Behind this proxy server I have a http server running apache (124.124.124.124).
This http server has multiple sites (virtualhost), it's only reachable via the proxy server.
If i run a nslookup on www.somedomain.com I get 123.123.123.123 (Not really but you understand what I mean)
I put my proxy to have the IP 123.123.123.123, so far so good. The requests come in to the proxy server.
I want my http server to be named 124.124.124.124.
In the http server I wish to set up my virtualhosts like this:
How do I get my proxy to grab the data from the http server?
If I do like this I will only make another request to my proxy server.
If I do like this, only the first page in the httpd.conf in my http server will work.
Do I need to setup a different DNS server for the proxy server? I would hate that. Perhaps use hosts-file in proxy. Or maybe I can use sub-domains?
View 1 Replies
View Related
Dec 16, 2010
I created VirtualHost in apache configuration file.
Code:
NameVirtualHost 77.79.13.20:80
<VirtualHost 77.79.13.20:80>
DocumentRoot "/var/www/host"
ServerName host.t2p.lt
</VirtualHost>
[Code]...
View 1 Replies
View Related
Feb 26, 2011
I'm setting up a full server configuration on Fedora, moving it from Mandriva which sadly faces a rather uncertain future. Things are going well and I will be ready (and more familiar with Fedora) in time to upgrade to Fedora 15.
What I have done so far in regard to networking setup:
I first removed Network Manager and replaced it with the network service (chkconfig --level 25 network on). That put an end to the overwriting of /etc/hosts, which now reads simply:
View 2 Replies
View Related
Aug 22, 2011
I am setting up a VirtualHost on my Apache. I am quite not familiar with Ubuntu setup so I am wondering what will I do with the 000-default file (which contains a template of virtualhost syntax)? What filename will I save it to?
View 1 Replies
View Related
Jan 24, 2011
I'm Rebuilding all the servers in the company I work for. I read anything I found about best practices in virtualizing, but I didn't find anything about virtualizing Apache. As MySQl is not considered to be virtualized as a best practice but to be on a separate machine - my question is "Do I virtualize an Apache server or put it on another real machine?". And also I'm going to put the server on Ubuntu!
View 11 Replies
View Related
Aug 7, 2010
Do I need to install APACHE web server & PHP on my machine ? or it is inbuilt there ? If it is so then how to use the server ? I have Fedora 9.
View 1 Replies
View Related
Oct 26, 2009
I have apache server running on Fedora 11. I want to test Self-signed certificate for SSL setup with Apache.HOw can I setup?
View 1 Replies
View Related
Oct 19, 2009
Is there some way that I can use apache/iptables to serve both of my servers through the same basic domain? I'm not talking about VirtualHosts either, I don't believe ( despite the fact that's all I can find anything to read about on Google when searching for this ).
Anyway, the problem is that I have a TorrentFlux php torrent-client that I run so I can add stuff to the download when I'm not around. I don't want to put this on my regular webpage server because there's just not enough diskspace in that machine. On the other hand, I don't want to replace that server all-together because the other machine is my desktop and would not make a reliable host.
So my idea was that there could be some way to have the apache2 server on my dedicated server redirect a subdirectory in its webroot to the webroot of my desktop's TorrentFlux server, but over standard HTTP ports so that it is more like the server is serving up the content of my desktop server through its HTTP service, instead of simply redirecting.
The reason I want to do this is because so far I have to use the TorrentFlux server on a nonstandard port so my dedicated server can still host its own things on port 80, but I've been running into several situations where the browsers I want to use do not support the nonstandard port such as with some instances of IE or the browser on my BlackBerry.
Anyway, I'm not looking for a step by step or anything ( though it couldn't hurt ) but I just need some ideas on what I could search for to get some better ideas. There's probably some term for what I want to do I'm not even aware of that would help me greatly.
Runnining Ubuntu 7.04 and apache 2.2.4 along with shorewall 4.0 as my routing/firewall software.
View 1 Replies
View Related
Apr 19, 2010
To automatically upgrade i need to connect to a FTP server. Now do i have to allow wordpress access via apache to the machine it is on or do i have to create a ftp server on another machine with the files on it?
View 2 Replies
View Related
Mar 25, 2011
I am trying to show library content (asp files, IIS server, MySQL database on Windows Server 2003 - Inetpub/wwwroot/library - 192.168.0.3) publicly. But Apache webserver is on Linux machine. In one of previos topics I was adviced to mount this remote machine webfolder into Linux /var/www. Well this way it want work. I was adviced it can be done through redirecting.
View 14 Replies
View Related
Jun 9, 2011
I need to ask how to add new virtualHost in litespeed.I just installed it.
View 1 Replies
View Related
Jul 31, 2011
We'll yesterday I got a new server and just installed Linux Debian. The thing is it's been so long (for over 5 years) that was the last time I set up virtualhosts in apache. The thing is I googled around a bit and supposedly my virtualhosts are OK, but I get this WARN when I restart apache2:
[Code]...
View 1 Replies
View Related
May 15, 2009
My server running CentOS 5.3. I use yum to install httpd, httpd-devel, php and it's module to run my site.
When I setup VirtualHost, i open httpd.conf and add some directive:
View 3 Replies
View Related
Dec 5, 2009
I am a novice with linux but I pick up stuff pretty quick so far I have been able to figure everything else out except this, I have read all the documentation on apache 2 and getting virtual hosts to work and it appears I have everything setup right but yet I still can't get it to work, I have googgled my brains out and I still can not figure out whats going on here is my setup.I have two websites that I am trying to get to load[URL]I have webmin installed and I'm using their utilities to setup virtualhost. heres how it looks in my http config:NameVirtualHost 24.189.245.44:80 ( I have tryed * in place of my external ip)
<VirtualHost *:80>
DocumentRoot /var/www/html/gamerbreed
ServerName gamerbreed.com
[code]....
View 3 Replies
View Related
Nov 9, 2010
I have installed apache on slackware (I was isntalled slackware without apache) and "It Works" but when I try to access it remotely it returns "404 error". Apache server work pretty well localy either for localhost or IP adress.
View 14 Replies
View Related
Aug 25, 2010
I currently am running 10.04.1 and have successfully setup my home web server to run a single website. My current settings are:
-I have registered the domain name annarrankings.com through godaddy
-A record is - host = @ and points to = 71.114.220.3
-CName is - host = www and points to = @
-on my server I have the site running in /var/www
I've done some research and found that to run multiple websites I need to setup VirtualHost.
-So I created a folder /var/www/annarrankings.com and moved my site to that folder
-Edited Apache2.conf to add the following line
-I then went to /etc/apache2/sites-enabled and copied the default file to a new file called annarrankings.com. Here's the annarrankings.com file after I edited it
-I then created a link in /etc/apache2/sites-enabled to the annarrankings.com file in /etc/apache2/sites-available
-Next I editied /etc/hosts
-When i went to enable the site using a2ensite annarrankings.com I got the following
I figured this was ok since I had already created a symbolic link earlier (a result of trying to following multiple tutorials and ..... videos at once) so I reloaded apache2. I created an index.html file in /var/www/ just for testing purposes and when I load www.annarrankings.com I get the file located in /var/www/ instead of the website located in /var/www/annarrankings.com Do I need to change my A record or CName in godaddy or did I just do this completely wrong?
View 8 Replies
View Related
Jul 8, 2010
I have been out of the linux game for a few years and decided to get back into it, I've been working now for a few days on figuring out why my machine's network card does not seem to want to work on a new FC13 installation.The machine is an older Dell Dimension with an 2.53 Gig Celeron Processor, 512 Megs of RAM (A gig soon) and the ethernet card is an Intel Corporation 82562EZ. Sone generic thing, though FC13 does recognize and appears to have appropriate software.
ifconfig shows no IP address in the x.x.x.x sense, and restarting the network doesn't seem to do anything. The network card is in working order, I tested it in a winxp installation, and the cable is also functioning.
View 4 Replies
View Related
Oct 29, 2010
So I tried installing fedora 13 on old pc (5+ years), the live cd boots ok. but when I click install to disk, the "starting Install to disc" tab comes up and then goes away, then nothing.This comp definitely has a large enough hard drive. (are there ram requirements that could cause such a thing?). It currently has windows xp (and probably loads of viruses).
View 3 Replies
View Related
May 6, 2009
I've been trying to enable SSL in a Apache+Debian server. I already enable the ssl module, I added the 443 port in the ports.conf and I added a virtual host for the 443 port, as follows.
NameVirtualHost *:443
<VirtualHost *:443>
ServerAdmin webmaster@localhost
ServerName www2.domain.com
DocumentRoot /var/www/
ErrorLog /var/log/apache2/error.log
CustomLog /var/log/apache2/access.log combined
SSLEngine On
SSLCertificateFile /etc/apache2/ssl/apache.pem
</VirtualHost>
The certificate is installed also. After I restart Apache, the error log don't show anything unusual. The only showed is this: Apache/2.2.3 (Debian) PHP/5.2.0-8+etch13 mod_ssl/2.2.3 OpenSSL/0.9.8c configured -- resuming normal operations. Still, I can't open any pages with https protocol, only with http.
View 14 Replies
View Related
Mar 5, 2011
Apache 2.2 on Slackware 13.1 seems to be missing the MIME icons when i visit a directory containing files.
This command returned nothing related to httpd
Code:
find | grep /icons
Where do i find the icons and how do i enable them ?
View 2 Replies
View Related
Jan 1, 2010
I am trying to get PHP5 working on Apache 2.2.13. When loading the PHP file in the web browser, the server does not appear to be passing the php off to the interpreter.Instead, the browser just treats the first command as an HTML comment and displays the rest to the user.
Relevant lines from httpd.conf:
LoadModule php5_module lib64/httpd/modules/libphp5.so
AddType text/html .php
#AddType application/x-httpd-php .php
AddHandler php-script .php
The second AddType is commented out because it causes Firefox to try to download the php instead of displaying it.
Output from httpd -M:
Loaded Modules:
core_module (static)
[code]....
Does it sound correct to think that there is some type of disconnect between Apache and the PHP interpreter?
View 1 Replies
View Related
Mar 17, 2011
I am trying to add a second vhost to my once working apache config. Now I have things really bollixed up and cannot access anything. I am getting a error 400. The access log shows this:
192.168.0.2 - - [17/Mar/2011:11:24:41 -0400] "GET /" 400 951
192.168.0.2 - - [17/Mar/2011:11:24:41 -0400] "GET /" 400 951 "-" "-"
I have a default (I think) httpd.conf file and put all my config stuff in files in vhosts.d. I have 3 files there:
[Code]...
View 14 Replies
View Related
Jul 16, 2009
I'm trying to make a redirect rule on my .htaccess but it's not working as planned.
Quote:
The first rule works fine, but on the second rule i do have a problem.
When I type http://domain.com/?tempskin=_rss2 the redirect does not work, but if I change the ? to any other character or even group of characters, the redirect works fine. example:
[url] will be redirected to [url]
But i do need to redirect the ?tempskin=_rss2. I already tried some variations on the redirect rule without any success.
View 1 Replies
View Related
Feb 5, 2009
I've installed Apache Tomcat--6 and even jdk1.6.I've even created a tomcat.sh file to start the serverautomatically and it includes the Environment variables also ($CATALINA_HOME & JAVA_HOME) for automatic startup.Next when i'm using http://localhost:8080 to call the server it shows unable to connect.I've tried changing the port no of tomcat in server.xml file. but still its not working.
-->Then i tried using--telnet localhost comand--it shows Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
Here I'[m stuck i don't understand how do i make the localhost work.
-->If I'm giving telnet localhost 25 the sendmail server is working.But the 80 and 8080 ports are not getting configured.
-->I've tried adding the port and its name in /etc/services file but still its not working.
-->When I'm giving the command--/sbin/chkconfig --list--->Its shows: xinetd based services:
...
...
telnet on.what should i do to get my tomcat server work properly.
View 2 Replies
View Related
May 25, 2009
I run mysqld on another server. I just switched to another dedicated server now, and i'm having trouble connecting to the mysqld server. If i run the php script from the bash console( php connect.php ) it works perfectly and connects to the mysqld server. However, if i run the script from apache ( http://localhost/connect.php ) it returns this: Can't connect to MySQL server on '(mysqld real ip)' (13) Mysql connection from another server(old httpd server) works perfectly, so it's not from the database server.
View 4 Replies
View Related
Apr 16, 2010
i have apache and mysql running, i can access my web server by visiting localhost on port 80 but for some reason when it doesnt work when i try using my ISP provided IP address... (it used to work).. i have my router setup with a DMZ on my LAN IP (my computers IP, this is the computer in my home network that serving with apache).. i also cant seem to shut down my mysql server (theres an update ive been trying to get) even when i use sudo...
View 5 Replies
View Related
Aug 13, 2010
I have 2 servers that are mirrored. They host 3 separate websites. Two of these websites are regular HTTP and the other is HTTPS with Digest authentication as well. The reason there are 2 servers is because one is a primary and the other secondary in case the primary goes down. Recently I decided to upgrade the secondary server then make it the primary server. I have done most of the configuration and the sites using regular HTTP are working perfectly fine. The page using SSL is not. Apache fails to load and here are the errors I am receiving the the error log file:
Code:
[Fri Aug 13 09:27:00 2010] [warn] RSA server certificate CommonName (CN) `newserver.domain.com' does NOT match server name!?
[Fri Aug 13 09:27:00 2010] [error] Unable to configure RSA server private key
[Fri Aug 13 09:27:00 2010] [error] SSL Library Error: 185073780 error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch
For the first warning, I cannot find anywhere that says the CN "newserver.domain.com", only what the CN is in the SSL key. I have no idea where to even start with the other errors.
View 1 Replies
View Related
Feb 20, 2009
'm running on Ubuntu and I've succesfully setup apache alongside with a working php & mysql configuration - other computers connected to the LAN can access it by typing in my ip: 192.168.0.9however I would like my webserver to be accessible by all internet users...I've got my ports.conf file in the apache setup to listen on ports 80 and 8080 this is my ports.conf:PHP Code:
Listen 80
Listen 8080
Listen 2000
[code].....
View 5 Replies
View Related
Jul 9, 2011
I am trying to set up Apache and Webmin so that I can access Webmin by going to [URL]. I am using the direction at [URL] under the "Webmin In A Sub-Directory Via A Proxy" section. I had this setup working before, but I think an update of either Webmin or Apache broke it. Now, I can go the the webpage and I see the login screen. However, when I try to log in, I get an error.
Quote:
Error - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode I have tried adding the ProxyPassReverseCookieDomain and ProxyPassReverseCookiePath directives to my virtual host config file, but it still doesn't work.
Quote:
# webmin
ProxyPass /webmin/ http://localhost:10000/
ProxyPassReverse /webmin/ http://localhost:10000/
[code].....
View 1 Replies
View Related
