To automatically upgrade i need to connect to a FTP server. Now do i have to allow wordpress access via apache to the machine it is on or do i have to create a ftp server on another machine with the files on it?
View 2 Replies
I've created a application,i tried to deploy in JBoss application server..that application working fine.so i tried to run my allication in apache web server,i have done some configuration in apache & installed apache-tomcat connector also..its working fine.but i will try access next page its showing error.
View 1 Replies View RelatedI need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.
View 7 Replies View RelatedAt school can connect to my computer via SMB/Samba and VNC from the Windows Machines, but not by hostname (I still cannot VNC in at home on my desktop computer and have yet to try Samba there because I wanna setup Samba there from the comfort of my laptop and therefore need VNC first). How come I cannot access this machine by it's hostname?
View 4 Replies View RelatedI'm Rebuilding all the servers in the company I work for. I read anything I found about best practices in virtualizing, but I didn't find anything about virtualizing Apache. As MySQl is not considered to be virtualized as a best practice but to be on a separate machine - my question is "Do I virtualize an Apache server or put it on another real machine?". And also I'm going to put the server on Ubuntu!
View 11 Replies View RelatedI am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
Do I need to install APACHE web server & PHP on my machine ? or it is inbuilt there ? If it is so then how to use the server ? I have Fedora 9.
View 1 Replies View RelatedI have apache server running on Fedora 11. I want to test Self-signed certificate for SSL setup with Apache.HOw can I setup?
View 1 Replies View RelatedIs there some way that I can use apache/iptables to serve both of my servers through the same basic domain? I'm not talking about VirtualHosts either, I don't believe ( despite the fact that's all I can find anything to read about on Google when searching for this ).
Anyway, the problem is that I have a TorrentFlux php torrent-client that I run so I can add stuff to the download when I'm not around. I don't want to put this on my regular webpage server because there's just not enough diskspace in that machine. On the other hand, I don't want to replace that server all-together because the other machine is my desktop and would not make a reliable host.
So my idea was that there could be some way to have the apache2 server on my dedicated server redirect a subdirectory in its webroot to the webroot of my desktop's TorrentFlux server, but over standard HTTP ports so that it is more like the server is serving up the content of my desktop server through its HTTP service, instead of simply redirecting.
The reason I want to do this is because so far I have to use the TorrentFlux server on a nonstandard port so my dedicated server can still host its own things on port 80, but I've been running into several situations where the browsers I want to use do not support the nonstandard port such as with some instances of IE or the browser on my BlackBerry.
Anyway, I'm not looking for a step by step or anything ( though it couldn't hurt ) but I just need some ideas on what I could search for to get some better ideas. There's probably some term for what I want to do I'm not even aware of that would help me greatly.
Runnining Ubuntu 7.04 and apache 2.2.4 along with shorewall 4.0 as my routing/firewall software.
I'm trying to get wordpress to work with lighttpd and my home test server... <name>.dnsalias.org as my IP is not static... When I install wordpress ( via apt-get ) and set it up through install script like this:
bash /usr/share/doc/wordpress/examples/setup-mysql -n wordpress <name>.dnsalias.org It is accessible from outside of my network but not from local one where the sever ip is 10.0.0.200 From outside it is using correctly domain <name>.dnsalias.org but from inside when I try to use ip 10.0.0.200 from other pc on net it will not work..a s it still using <name>.dnsalias.org in all links... Also I would like to have it in <name>.dnsalias.org/wordpress as I have another test site in <name>.dnsalias.org/<test_Site> which by thee way works from inside and outside of my network.... its just wordpress ...
I have followed this guide: [URL] but its for apache... I spend whole night searching for some solution and now I'm dead tired and you are my last hope ...( ....Obi Wan Kenobi ) So does someone running wordpress in setup like I described above, if yes
I am trying to show library content (asp files, IIS server, MySQL database on Windows Server 2003 - Inetpub/wwwroot/library - 192.168.0.3) publicly. But Apache webserver is on Linux machine. In one of previos topics I was adviced to mount this remote machine webfolder into Linux /var/www. Well this way it want work. I was adviced it can be done through redirecting.
View 14 Replies View RelatedI am trying to add a virtual host to my machine by name to the IP here.It absolutely refuses to work.it is a mess server I hope to upgrade soon, but it has 2 versions of apache running together on it.The first one (php3) just proxies all the requests from 80 to 8080 which has another instance of apache running php5.I don't know what else to do, it keeps defaulting to the host header error virtual host.
View 1 Replies View RelatedI would like to install wordpress on fedora 14.so I downloaded the packages needed to install apache+php, and I saw the site is located in the directory /var/www/html.I unzipped the wordpress archive to this directory but when I enter the address "http://localhost/wp-admin/install.php" in the browser (firefox launched from the command line as root) I have the error message : ****************************You don't have permission to access /wp-admin/install.php on this server.****************************do you know what thing I have to do in order to make the directory available?
View 2 Replies View RelatedI installed Apache server with Debian 5.0.2 Lenny. I am trying to write a script which would analysis web log files. I found the log files on /var/log/apache2. There is an access log file, `access.log`. My question is what configuration file determines the location and the name of the access log file. How can I change them? I used CustomLog in /etc/apache2/apache2.conf like below.LogFormat ": %h %l %u %t "%r" %>s %b" common
CustomLog /home/test/my_log_file common Apache2 generated /home/test/my_log_file. But no logs were written in the file even after I run `/etc/init.d/apache2 restart`. Ichanged the log file location. It still didn't work. However, Apache2 still wrote logs in the file `/var/log/apache2/access.log`
I'm having a problem when I try to connect to my apache2 server from any client in my network using the .local address with the firewall on. I opened the port 5353 UDP but I still can't connect. The only way I can connect is disabling the firewall which I don't like to do on the server. What I'm doing wrong?
View 9 Replies View Relatedi have already configured a domain in my server. now i have configured multiple local ip addresses,can i configure a domain for each local ip address. is it possible. if possible how can i access the web page through apache.Because already i am accessing the web page for a pre-configured domain from the path /var/www. if i able to create new domain.From where the apache fetches that index.html file, when requested through browser.
View 5 Replies View RelatedI'm configuring a web server using Apache and Tomcat. I use Apache 2 and various instances of Tomcat5 and Tomcat6..I try that Apache serves the static data and tomcat the dynamic (Apache receives all requests, sending tomcat only the dynamic)I see that Apache and Tomcat can be connected using http or ajp Can any tell me:
- What connector should I use: ajp, http,...?
- How can I say Apache to serve the static data and Tomcat the dynamic?Due to I have many instances of Tomcat, connectins http and https, https with client certificates, and due to the port configuration:
- Is there any way to configure Apache-tomcat without the use of ports in tomcat (a differect connector)?
Ubuntu 10.x servervsftp mysqlwebmin Apache2I am running the Ubuntu server on the same 192.169.x.x subnet as the PC I am using to test vsftp and webmin and Apache.I can connect to the Apache web site hosted on the Ubuntu server but I cannot connect to any other service -- i.e. port 21 or port 10000 or 3306.Netstat shows:
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTENING
tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTENING
tcp6 0 0 :::80 :::* LISTENING
[code]....
I have a fresh fedora 13 install, I managed to browse and setup my phpadmin.....and browse everthing locally. I can not browse the web site from any other machine in my network. All my machines get their IPs from my dhcp (192.168.1.0).I googled and read a thread in this forum, I understood it might be due to SELINUX. I disabled it, rebooted, still have the same behavior, browse my apache locally but not from other machines. I did a telnet from one of my machines using the IP as followstelnet 192.168.1.11 80got the following onnecting To 192.168.1.11...Could not open connection to the host, on port 80: Connect failed.I checked error-log and access_log file, found no hint. I think it should be something related to some fedora systemor firewall or selinux config that is not allowing access to it.
View 4 Replies View RelatedI am looking for the best way to set up permissions in the following situation. I have a web server set up on debian. I have different web sites in /var/www. Each web has a group of developers who each have system users and ssh access to the server. For example i have a web site in /var/www/example.com and a group of developers in group exampledev. I need all the users in exampledev plus the apache user (www-data) to have read write and execute permissions on all the content of the web site. I can give the group exampledev these permissions without a problem. The problem is that when they modify or create new files (they either connect via ssh o sftp which is the same right?) they are created with their user and group rather than exampledev. Am i going down the wrong path? This must be a common situation but i haven't found the solution.
View 5 Replies View RelatedWe have Apache installed on CentOS 5.3 in our laboratory. Indeed the server is running fine for almost two years since it is actually the first CentOS 5 that was released just regularly updated. Now, most of our applications are custom made PHP applications and until now we somehow managed to avoid using PHP to fetch files that are on the internet itself. But now we are desperate because we need to allow PHP to fetch files through Apache but it seems as if Apache is not allowed to make a connection to the outer world. Additionally we use a proxy server to connect to the outer world so right at the beginning http_proxy is used to set that environmental variable. And for the root user it all works fine after that but it seems as if the apache user is not allowed to access the internet. Just to make a remark our web server can be accessed from the outer world so its a one way street for now.
View 1 Replies View RelatedI have installed Apache on Centos, had no issues during setup, httpd seems to be running but I can't access my slice through [url]. It looks like Apache has some issues or something?
View 2 Replies View RelatedRight now I have Apache and Tomcat running on the same server. For reasons I won't go into I'm experimenting with putting Apache on a separate server, and installing Tomcat on multiple back-end servers. This isn't a load-balancing scenario as each Tomcat container on the back-end servers will be providing a separate application/responding to a different url. In a typical setup (everything on one box) the configuration file (we use workers.properties)sets what appears to be parameters such as the location of tomcat and Java. For example, here is the current output of workers.properties:Quote:
workers.tomcat_home=/usr/share/tomcat6/
workers.java_home=/usr/lib/jvm/default-java
ps=/
[code]...
Im trying to config my intranet to be accessible from inside the network (lan) without need of password and ask for a passwd for those who are viewing from Wan ....
Today my intranet can only be accessed from Lan, external access give me an Unauthorized message, I took look around, try #irc and still can get the appropriated help, I hope that someone here could help me on that...
A piece of my config:
Code:
I was unable to access my dedicated server for few minutes. I have checked the apache error logs and found below notice:
[notice] caught SIGTERM, shutting down
I have tried to search from Google but could not find much information about this error.
I'm trying to set up a small Intranet system to run OpenERP or similar using browser-based clients. I have an Ubuntu machine running 10.04 desktop edition to act as a temporary/testing server until we set up a proper, dedicated machine with 10.04 server edition. I have installed Apache2 from the repos and it is up and running fine - locally. That is the problem, I can't access the server from other machines on the LAN. Ping works, btw. So I've been reading tutorials and howtos for the past week, but for the life of me, I can't find what I'm doing wrong. The standard Apache setup seems to be made to "just work", so although I've looked at the various configuration files mentioned in the tutorials, I haven't actually changed anything.
View 9 Replies View RelatedI set up my first web server and it works flawlessly -when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.
I have two network interfaces on my server, eth0 (public static IP connected to internet directly) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1. It is connected directly to the internet and serves as a SNAT for other comps on the lan.I added "192.168.1.1 www_server_com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.HOwever, the server itself only opens website if the address islhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www_server_com ( I cant use dots as I do not have more than 15 posts on the forum )Here is the firewall script I am using.
#!/bin/sh
#
# Example Firewall Script
[code]...
I am trying to set up an ampache server using apache as the webserver. The instructions have the following line as one of the requirments: Your webserver has read access to the /sql/ampache.sql file and the /config/ampache.cfg.php.dist file..I have essentially zero experience with apache, and I'm not sure how to grant read access to a file.
View 1 Replies View RelatedI need to make a script in which I want to block an ip when its access on a web server exceeds than certain number e.g., 5000 for a particular time period, let's say for 6 hours or 12. If any ip exceeds that limit, it should automatically be blocked. I also want to run this script on regular intervals in 24 hours for atleast 2 times.
View 2 Replies View RelatedIn CGI scripts, there are certain files that are getting "permission denied" when it seems they should be accessible by the apache user. I am running the default package install of apache under fedora. Here is an example:The following is /var/www/cgi-bin/test.pl
Code:
#!/usr/bin/perl
use strict;
[code]...
