Server :: Webmin Through Apache Proxy - Authentication Cookies Not Working
Jul 9, 2011
I am trying to set up Apache and Webmin so that I can access Webmin by going to [URL]. I am using the direction at [URL] under the "Webmin In A Sub-Directory Via A Proxy" section. I had this setup working before, but I think an update of either Webmin or Apache broke it. Now, I can go the the webpage and I see the login screen. However, when I try to log in, I get an error.
Quote:
Error - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode I have tried adding the ProxyPassReverseCookieDomain and ProxyPassReverseCookiePath directives to my virtual host config file, but it still doesn't work.
i have been looking up ways to block websites in linux but most all of the free ones only block the sites the software makers want to (or you can't block just the sites you enter without blocking the sites that it wants to)i need to know how to block only websites i enter with squid using webmin
To make my problem simple to understand I've attached a picture. Basically, in the Webmin>Apache configuration page, where I used to also enable/disable the modules Apache was using (on Ubuntu 8.04) I've noticed now that the option to configure the modules is no more (on Centos 5). So, I'd like to disable and enable some modules but can't, like the mod_python for example which gives me hundreds of errors in the Apache's logs, but cannot.
how to view the Apache modules again in Webmin?
just noticed can't attach images... here's the link to the picture: [URL]
this might not be a Centos related issue, but since I'm using Centos I guess it doesn't hurt to ask; I've used Ubuntu before and haven't encountered this. So, I've just installed Centos and Webmin and now I'm trying to configure the server. Problem is that on the Apache configuration page I don't have the option (should be there) to configure the Apache modules. I've attached a file to show where the modules option should (as before) appeared.
I tried creating a virtual server in apache and it got created successfully. (I also added a zone in dns for that domain successfully) However, when I try opening that domain in my browser, I see a popup window which asks me what to do with "default" which is a php file type.
I dont see the index.php which should actually open. What do I do to make the php files display correctly?
Am using Fedora 15, in which i was able to configure the proxy server and authentication. i confirmed this by configuring web broswer and it works. Now the problem is that i want to deploy it out to other computer system(client) i dont want to use the transparent proxy because the Proxy Authentication will not work. I even tried to configure a DHCP server if it will work but i cant still configure for other computer system to work.
I'm fairly new to Linux and very new to Squid and am having authentication issues! I am using Oracle Enterprise Linux (which is basically Red Hat without the branding) and wanting to use Squid Proxy Server for web access with authentication to Active Directory. I've found a number of articles about this online and all of them say to use auth program squid_ldap_conf which should be in /usr/lib/squid/. I don't have a squid directory in /usr/lib for starters and my squid binaries are in /etc/squid but there is no squid_ldap_conf in there either. I have installed the latest version of Squid (3.0) to see if that helped but I still cannot find the authorisation program.
I have a question to masters of Apache. In my operating system (CentOS 5) I have installed two Apaches. One is Apache (port 80) from repository where I planning to configure proxy and second one is Apache integrated(port 8090) with KnowledgeTree software. The problem is that when I am trying to configure proxy reverse it simply doesn't work.
This is link to KnowledgeTree software: - http://127.0.0.1:8090/knowledgeTree
This link I would like to rewrite with proxy like this: https://myserver.com/knowledgeTree (HTTPS dont forget)
In my ssl.conf in VirtualHost part I have created something like this: Code: <IfModule mod_proxy.c> <Proxy *> Order allow,deny Allow from all </Proxy>
I am trying to configure a reverse proxy server that can act as a reverse proxy for ms sharepoint server that uses https. Usually when I accessed the sharepoint server at [URL], I will be prompted to enter active directory login. But what was "500 internal server error" and in error.log: failed to enable ssl support for 10.10.1.1 (sharepoint.mycompany)
I've read the documentation, but I'm still confused. I have two servers, one running Postfix and SquirrelMail, and another i want to setup a wiki(already setup) and Photo Gallery.On my Second server(2)I have two virutal webservers, wiki.rmasonfamily.info and photo.rmasonfamily.info, both running on port 80.My first computer is running my mail server again as a virtual server, mail.rmasonfamily.info. Default server is not used in either one.
Server 1 will be my proxy server, and if I understand correctly, my reverse proxy. Ubuntu had Apache set with a configuration in etc/apache2 using sites-available with configuration for each Virtual Server with sites-enabled with links to configuration files in sites-available. My Virtual Server in Server 2 are working fine, along with my mail server in Server 1. this is the code I assume I must use to bypass to wiki.rmasonfamily.info. In server 1, under sites-available, in the file wiki.rmasonfamily.info this is the code I put
<VirtualHost *:80> ServerName wiki.rmasonfamily.info ProxyRequests Off ProxyPreserveHost On
Here my setup of Apache : I have two virtual hosts on separate IP and on both I am using port :80 one is main website domain.name and another webmail.domain.name. And to get full link path I am using index.html with redirection derectives. My question how I can setup each Vhost to he is own redirection directive to set two full link like: when type webmail.domainname -----> redirect to webmail.domainname/horde/imp/file.php and www.domainname ------> redirect to www.domainname/csr/ Right now working only one of this Vhosts, just problem to separate them when I type www.domainname -----> apache redirect to webmail.domainname.
I have CentOS 5 configured with apache web server. but it is not asking for password authentication while accessing the web page. the config detail is as below code...
But when I try to check for syntax errors tells me SSLRequire not allowed here I do not want to add SSLRequire on the main httpd.conf because I only want it for one virtual host. The rest of the virtual hosts do not need it.
OS :red hat 4.2 oracle EBS SUITE Applications:11.5.10
Iwould like to install Proxy(Apache) server on linux.is it possible?
I would like to trace the user activities by proxy server. we are running many applications on that.How to trace that.is there any server better than Apcache?
A Linux (CentOS5.3) server is setup with apache reverse proxy. The reverse proxy server is opened to outside and an internal server is mapped to ProxyPass configuration. SSL certificate is also installed on the Apache reverse proxy server. The problem is, it is extremely slow in serving http requests through reverse proxy. There is no problem with server resources or bandwidth. When the internal server is directly accessed through Internet, there is no delay. The backend server and the reverse proxy server are also on the same switch (same subnet). When I searched the Net, there were recommendations to enable cache in Apache. I did so as follows in httpd.conf.
But still there is no progress. Do I want to enable cache in ssl.conf too? Or is there any other workaround to speed up Apache reverse proxy. Is there a way to check that caching is happening?
I just made a script to install a Transparent Proxy with DHCP Server, Content Filtering and Webmin. It installs and configures the modules and starts them. I can use from two to five interfaces (eth0, eth1, eth2, eth3 & eth4). I've tested in 8.04 to 9.10 and works fine. It does not configures BIND and IPTABLES, just install all the modules needed for a transparent proxy, and configures DHCP, SQUID, DANSGUARDIAN and WEBMIN for Ubuntu. I did it because mostly all configurations I do are transparent proxies.
What does: 1. Installs many packages needed for transparent proxies, and webmin. Also installs perl modules needed. 2. Configures default Squid settings for transparent proxies, and a better Dansguardian content filtering for public access. 3. Configures and fixes Webmin DHCP and Dansguardian modules to work on Ubuntu. 4. Configures DHCP Server subnets.
What doesn't: 1. IPTABLES and BIND. You must configure both manually. IPTABLES can be configured with Firewall Builder or other firewall tool. BIND can be configured using Webmin or the CLI. 2. Configures /etc/network/interfaces. You must configure all network interfaces correctly. Any mistake can screw the automatic configuration. 3. Dansguardian Blacklists. You must use your prefered blacklists. I use URLBigBlacklist with a modified script to work on Ubuntu (downloaded from Danguardians' Extras and fixed up to work on Ubuntu). 4. Check the script if there's something missing.
Pretty much as described in the thread title. I'm running RHEL6 on both the server and the client.I followed Red Hat's own instructions to set the kdc upI have a user called krb, that has been added to the KDC and I can get a ticket from the KDC, by using
Code: kinit -p krb If I then try to log in to the KDC, from the KDC, with
I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.
This is the common part:
Code:
AuthType Basic AuthBasicProvider ldap anon Order allow,deny Allow from all
This part by itself works for the LDAP authentication:
Anonymous guest Anonymous_VerifyEmail Off Anonymous_MustGiveEmail Off Anonymous_LogEmail on Require valid-user
But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?
I created a new virtual host in Apache using Webmin and am having trouble getting it to work. When I created it, I opted to create the config file as a "New file under virtual servers directory /etc/apache2/sites-available". So now I have a default config file /etc/apache2/sites-available/default and a new one created by Webmin at /etc/apache2/sites-available/webmin.1412323.conf. It seems like the settings in that new Webmin config file aren't being picked up by Apache -- when I try and browse to mywebsite.com it shows my root /var/www folder, not the subdirectory /var/www/mywebsite.
Is there a way I can tell Apache to include the new Webmin config file for the virtual host or should I just copy the directives into the default file at /etc/apache2/sites-available/default? It seems like Webmin should automatically configure Apache to work with any newly generated config files.
I am using FEDORA 11 and Squid 3. Squid configured and working perfectly but some Win XP users unable to access their mails through outlook express. can anybody guide me what should i do to enable pop/smtp ports via through nating / MASQUERADE etc..
I am re setting up a server of mine running red hat enterprise Linux server 6 and I had all of this working befor but for some reason I had troubles getting sasl to work and now when I login my smtp server I get an error stating that my username or password is incorrect though I am sure I am entering both correctly. Would anyone know what could be happening? I have been spending days on the web looking for the solution and only went from sasl not working when started as a service to this. For some reason I can't use Pam with saslauthd and had to use shadow instead of which from what I hear I get to use better methods of secure authentication with smtp
How do you get SSH to use a socks proxy? I have tried: Code: ssh -o "connect -5 -S socks_proxy:1080 %h %p" host_server 22 I have tried to use socksify but I am not sure how to setup the client.
I have an issue with Adobe AIR, which I use to run Tweetdeck. It keeps on asking me to authenticate for my proxy server - every time Tweetdeck tries to load someone's avatar, for instance, which is making it pretty unusable right now.
I'm not sure why it's doing this, other than that I've just upgraded to 9.10 (well, to Mint 8, actually, but I would think the issue is the same). I've got all my proxy settings working, and indeed AIR seems to be able to read the settings from somewhere (it autocompletes the authenticate box with the correct details), but it just doesn't seem to be able to authenticate once and then be done with it, like it had done previously.
when i use the terminal, and i run "sudo apt-get update", there is a notification which says, "407 proxy authentication required". i use the internet of our school which requires its users to log into its proxy server so that the user can have access to the internet. the problem is i cannot run update or install commands through the terminal, though i can connect to the internet through firefox.
