SUSE :: Connect 11.2 To Internet Using ZyXEL 660HW T2 Router?

Jan 13, 2011

I'm using ZyXEL 660HW T2 router for my internet connection. The router is already set up.., my connection is working on winXP(just plug the cable and that's it). How to connect my suse 11.2 to internet? I tried to setup in YaST --> Network Settings

********************************** Code: OUTPUT OF "lspci":
linux-1c1l:~ # lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
[Code].....

View 2 Replies


ADVERTISEMENT

Ubuntu Networking :: Installed WLAN Router ZyXEL 660HN - Cannot Attach Big Files - 1.7 Mb - To Emails

Jan 15, 2010

Does anybody know what to do? Internet works fine except for that problem.

I can attach files of 33kb in web-based email service (Gmail) but no big ones.

View 3 Replies View Related

Ubuntu Networking :: Unable To Connect To The Internet But Can Connect To The Router

Apr 6, 2011

I am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.

[Code]....

View 5 Replies View Related

Ubuntu Networking :: Zyxel NWD-271N Usb Adapter Will Not Connect

Feb 9, 2011

I'm having some trouble getting my Zyxel NWD271N usb wireless adapter to connect.I'm using Ubuntu Desktop 64bit 10.10 What happens is that i'm always asked to enter the wpa key, and i've double and tripple checked that it's entered correctly. The wierd thing is that it has connected once or twice, but lost connection quickly, but i saw that i got an ip. I'm not sure about the maximum range on the adapter but i would estimate the distance to be no more than 4-5 meters from the wireless point. Also the signal indicator on the list of wireless networks shows strong, if not full. when i run lsusb i get:

Code:

Bus 001 Device 007: ID 0586:3417 ZyXEL Communications Corp. NWD271N 802.11n Wireless Adapter [Atheros AR9001U-(2)NG] when i run lsmod |grep ar9170 (saw the command on a german forum so i didn't understand what was talked about, but i got that it was about the same adapter) i get:

Code:

ar9170usb 54294 0
mac80211 267163 1 ar9170usb
ath 10413 1 ar9170usb

[code]....

View 5 Replies View Related

Ubuntu Networking :: Accessing External Hard Drive (Zyxel NSA-220 Plus) Over The Internet?

Feb 27, 2011

I would like to access my NSA-220 Plus through the Internet without having computer turned on. I tried to set it up as a FTP server but I was not successful. I tried few tutorials but all allow me to access NSA-220 Plus only within my home network which is not what I want. Also I tried user manual which does not really tell you how to do this.

View 2 Replies View Related

OpenSUSE Network :: Connect To The Router - But Not The Internet?

Jul 17, 2010

installed openSUSE 11.3 and round that both wireless and ethernet connections could connect ok to my router but couldnt access the internet. I think its a bug because I didn't have this issue in previous versions of openSUSE.

The solution is to go into the ip settings in the wireless configuration, select the option to manually assign ddresses (not DCHP) and

- enter the ip address of your router in the default gateway and DNS server addresses

- manually assign an ip address to your computer rather than have the router do it

- it has to be in the same range as your router -n normally 192.168.1.x where x can be any number not already used.

View 2 Replies View Related

Networking :: Connect To Internet Through A (wireless) Router?

Jul 30, 2010

I connect my internet using pppoe to may DSL modem with bridging mode, and it goes fine until I try to put a wireless router between my PC and the modem. After I configure both modem and the router, I can run my wireless network fine by connecting it from a laptop, but my PC is unable to reach the modem at this configuration.

PC has address 192.168.2.100
Router has address 192.168.2.2
Modem has address 192.168.2.1
all with netmask 255.255.255.0

With bridging configuration in modem and automatic detect configuration in the wireless router, the wireless network run well, except the PC cannot ping the Modem saying that

Code:

root@firefly:~# ping 192.168.2.1
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
From 192.168.2.100 icmp_seq=2 Destination Host Unreachable

Looks like my PC, which has Slackware 13.0, don't know how to reach the modem even they are physically connected.

1. how can I configure the modem, PC, and router so that the PC can reach the router? Do I need to do add route gateway from the PC?

2. How can I configure internet connection from the PC (before I use PPPoE)?

3. How can I configure the modem, PC, and router so that the wireless network is on?

View 7 Replies View Related

Slackware :: Unable To Connect To The Router Or The Internet

Feb 21, 2011

I am running Slackware -current. Every thing was working fine and suddenly it stopped. I am unable to connect to the router or the internet. Which is a problem since I'm using it right as a server.

[Code]....

View 14 Replies View Related

Fedora Networking :: Cannot Connect To Internet (Netgear Router)

Apr 27, 2010

I cannot connect to internet. I just installed Fedora 12 w/ the Live CD and I have a Linksys WMP54G Wireless Card (v4.1 I believe) and it apparently installed fine upon install of fedora. It will not thought connect to the internet. It reads my connect (NETGEAR-2.4-G), my router is a Netgear WNDR3300. It worked perfectly fine on Windows XP. Like I said, it picks up my wireless connection. But when I go to connect it attempts to connect for like a minute or two then goes back to not connected.

View 3 Replies View Related

Ubuntu Networking :: Connect To Internet Using ADSL Router?

May 23, 2010

I'm a beginner in Ubuntu, I'm using Ubuntu 9.10.
Currently using a Dlink GLB-802c router and using a ADSL connection. I try to connect to the Internet but it is unsuccessful. Ubuntu is not indicating my router when I connect to the PC.

My PC is P4 and using USB to connect to internet, PC haven't a Ethernet interface.

View 1 Replies View Related

Ubuntu Networking :: CAN Connect To Other Computers But Not Router Or Internet - 10.04

Jan 3, 2011

- CAN connect to other computers - ssh and vnc over the home network (via D-link 524 router).
- CAN get an IP address via DHCP
- CANNOT get internet connections - including router at 192.168.0.1
- CANNOT even ping router (but I get an IP address - weird)
- Other computers on the network CAN access internet
- Live CD could not access internet

results of ifconfig

Code:

Code:

I am wondering if his ISP could be doing this - he has received a warning letter about bitorrent. Could the isolate a single computer behind a NAT router?

This is the results from dmesg:

Code:

I have tried:

- to set proxy settings as "Direct internet connection"
- disconnecting power to (including 30 sec wait): modem, router, computer + unplugging ethernet from computer
- Live CD (he only had an old one 7.10) which also didn't connect to internet, but as I am remote, I couldn't do any more. We are downloading a 10.04.1 iso for him to burn tomorrow, and will try that again.
- Uninstalled Crashplan which was the last software that we installed (and it was working ok).

I am currently ssh'ing into another computer on the network that IS working, and then ssh'ing into my Dad's computer - including a VNC session (tunneled through both machines and router).

View 5 Replies View Related

Ubuntu Networking :: Connect To Internet Using Wired Router?

May 4, 2011

i recently connected this router to mahh modem..http:[url]....before router connection i was able to connect to internet via "pppoeconf command" but now i am not able to connect to internet from ubuntu ..i am still using lan cable coming out or router to connect it with pc..

View 2 Replies View Related

Hardware :: VoIP Router - Browser Cannot Connect To Internet

Aug 24, 2009

When I install 99% of Linux distros they all come up as wired eth0 connected but the browser cant connect to the net. I found out it was because it cant find my Voip router if I disconnect the voip router they work fine. I am using NetCom V300 telephone router yet PCLinuxos 2009 has no problem with this issue. I have to use my Voip and also want to use the other 99% linux distros.

View 4 Replies View Related

Networking :: Cannot Connect To Internet With AT&T 2WIRE Wireless Router

Oct 4, 2010

AT&T will not help. I am trying to connect with Cable (CAT5). When I try to configure my network card with YaST here is the message received. "Unable to configure the network card becasue the kernal device (eth0, wlan0) is not present. This is mostly cause by missing firmware (for wlan device) See dmesg output for details"

View 2 Replies View Related

SUSE :: Modem Can't Connect To Internet

Oct 12, 2010

My modem can't connect to internet but my broadband connection works, i dont want to login the broadband connection every time i start thte computer.

View 2 Replies View Related

SUSE / Novell :: Cannot Connect To Internet With 11.2?

May 17, 2010

I am trying to connect to my network. I am dual-booting with windows 7 ultimate and that connects just fine. When I plug in my ethernet cable to the LAN adapter of the motherboard nothing happens. In the network manager it doesn't even acknowledge something has been connected (ie no eth0 or anything). I'm guessing that I don'tave a driver for it installed under linux. The adapter is the Marvell Yukon 8059 (88E8059 I think)

View 5 Replies View Related

Ubuntu Networking :: 3g Internet Stop Working When Connect Wi-fi Or Lan To Router?

Feb 12, 2010

Useing gnome network manger. I thught that is DNS resolve problem, and wrote in linksys router the same DNS as 3g huaweii modem use. Steel the some result. NO INTERNET. Change for static ip in router and try use the same gatway , but steell can't use connected at the same time to internet with 3g and local router.

Only one devace at the same time, Router have no any acces to internat. SO why 3g internet stoping working after connecting router to LAN ports? Has it some thing to do with subnet or ip range and routing table?

View 1 Replies View Related

Ubuntu Networking :: Connect To Wireless Router But No Internet Access?

Oct 27, 2010

At work, we (like almost everyone) are still full-on windows. I am currently trying to get away from windows because I am not a fan. my current windows machine (different from my Ubuntu machine) is accessing the wireless network fine, and there are no obvious problems there. Also, my Ubuntu machine can access my wireless network at home, so I know there are no driver issues. I set up the connection for the Ubuntu machine, and it seems to be connecting OK. I can ping internal IPs and by all statuses, the connection to the router is functioning. However, when I attempt to load a web page or ping a domain or external IP, it fails. I tried to ping the IP, thinking if that worked, it's probably the DNS, but pinging both domains or IPs fails. I have looked around at forums and posts, but none of them seem to match my issue (that's probably not true, but I am struggling to see the commonality).

Here are the results of "netstat -r":

Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.45.0 * 255.255.255.0 U 2 0 0 wlan0
link-local * 255.255.0.0 U 1000 0 0 wlan0
default 192.168.45.5 0.0.0.0 UG 0 0 0 wlan0

And here is "ifconfig":

wlan0 Link encao:Ethernet HWaddr 74:f0:6d:XX:XX:XX
inet addr:192.168.45.49 Bcast:192.168.45.255 Mask:255.255.255.0
inet6 addr:fe80::76f0:6dff:XXXX:XXXX/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

[code]....

View 3 Replies View Related

Ubuntu Networking :: Wifi Router Recognised Can't Connect To Internet?

Jan 7, 2011

After forgetting my wifi router password, I had to reset and reconfigure the router. I enabled WEP, and after I typed the password, the computer now recognises it automatically. But I can't connect to the internet no matter how long I wait. (The wired internet connection works fine.) How can I get the wifi to connect to the internet?

View 1 Replies View Related

Ubuntu Networking :: Connected To Wireless Router, But Can't Connect To Internet?

Aug 2, 2011

I think something weird is going on. On a fresh installation of 11.04, I seem to be connected to my router just fine, but I can't reach the internet or anywhere else on my network. Anybody see my problem from what I've posted? The computer is only connected via wireless (so I don't know why eth0 would be connected as well). I can't think of what I'm missing...My system seems to be connected to my router on two interfaces. "ip addr" gives:

Code:
1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

[code]....

View 9 Replies View Related

General :: Connect To The Internet With A Smartax Mt880 Adsl Router?

Feb 28, 2010

i need to connect to the internet with my huawei smartax mt880 adsl router from a linux redhat 9 box ,

- I can get into the router as user admin / admin at address 192.168.1.1

- I get missed in between pppd setup & my kernel modules insertion . . .

- can I find a clear step by step guide to get me connected to the internet ?

View 2 Replies View Related

General :: Connect To Internet Using D-Link GLB-802c Router In Ubuntu 9.10?

May 31, 2010

I'm using D-Link GLB-802C router to connect to internet, It has one Ethernet port and USB port. I want to connect to internet in ubuntu using USB port. My PC is P4 machine and it isn't a Ethernet interface. My router's driver CD includes usb drivers to windows 98, xp OS only. I want step by step guide to setup the internet connection in ubuntu. I'm from sri lanka and i using SLT ADSL connection.

View 14 Replies View Related

OpenSUSE Wireless :: Exchanged Modem/router For Same Model But Now Cannot Connect To Internet Using WEP

Dec 1, 2010

I had an ATT "2Wire" modem/router that was working but connection to the Internet was often poor. An ATT technician came to my home and swapped out the modem/router for the identical model. I changed the ESSID and WEP code to match the new unit and everything was fine with the following wireless units: a wireless desktop, two cellphones, three wireless Archos tablets, and a couple of e-reader tablets. So all seemed to be fine wirelessly. However...

My laptop (SuSE 11.0, KDE3) simply won't connect no matter what I do. I changed the ESSID and WEP info in the lappy exactly as was done with the other wireless devices named above. But no good. The lappy does see the modem/router (a good, strong signal appears in KNetworkManager). But it seems as if the modem/router is rejecting the lappy's attempted handshake using the new ESSID and/or WEP information.

I thought that perhaps there was something wrong with the lappy's wireless card, so I took it to a Starbucks to see if it would connect there on an open network, and it did without problem. So the lappy's wireless card appears to be working fine. It just won't talk to the encrypted modem/router at home. Here are the settings on the lappy. Hopefully something here is easily identified as the culprit. With all the clicking I've done it certainly is possible that I ticked something that should not have been ticked and just don't realize what I've done.

Network settings screen:
Global options tab:
Network setup method: user controlled with Network Manager
Change default route via DHCP (ticked)

[code]....

Why won't the new modem/router which is exactly the same as the old one except for the ESSID and WEP work with my lappy yet it does work with a bunch of other wireless devices?

View 9 Replies View Related

Ubuntu Networking :: No Internet Connection Mint 8 - Won't Connect With My Wireless Router

Feb 12, 2010

I have just installed Linux Mint 8 to an Asus A6000. My problem is that the computer won't connect with my wireless router. I have tried with MAC-adress and such, but still no respons. I also tried to connect with a cable to my modem, but no response there either.

I think I may lack some drivers, to what I think is Broadcom b43, but I am not sure. I tried to download the drivers on my other computer, and transfered them to the Asus. I managed to install 2/4 drivers, but on the two others, I get this message "Failed to fetch ... Couldn't reach archive.ubuntu.com"

View 2 Replies View Related

Networking :: Getting An Ip Address From The DHCP Router, But Cannout Ping Any Other Ips Or Connect To The Internet?

Jan 31, 2010

I've only been using linux for a few days so I don't know all the tricks. I'm pretty savy configuring windows networks however.My adapter is (according to windows) a: CNet PRO200WL PCI fast ethernet adapterLinux says it is a: 21x4x DEC-tulip compatible 10/100 EthernetI do seem to be getting an ip address from the DHCP router, but I cannout ping any other ips or connect to the internet.I've tried a bunch of different options, switching things back and forth, but it still doesn't work, and honestly i don't even know what some of the options mean.

ALSO, if this helps:
paladin:~ # ifconfig eth0
Eth0 Link encap:Ethernet HWaddr 00:08:A1:03:3C:99

[code]....

View 14 Replies View Related

Ubuntu Networking :: Wired Ethernet Connection - Unable To Connect To The Internet Or My Router

Dec 5, 2010

I have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.

View 9 Replies View Related

Ubuntu :: Tp-link Router - Laptop Had Connect To Internet But Browser Can't Open A Website

Dec 8, 2010

i have a problem with my new router and ubuntu 10.10. The problem is that my internet connection show me that my laptop had connect to internet but my browser can't open a website ( this problem is the same with my netbook ) to fix it always must turn it off and after on either it never makes.

View 4 Replies View Related

Ubuntu Networking :: Connect Only One PC At A Time To Adsl Router/modem For Internet Access?

Apr 1, 2011

I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.

Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).

View 5 Replies View Related

Ubuntu Networking :: Connect WiFi Router TP-LINK TL- Wr942nd To Provide Wireless Internet To Other 2 PC

Oct 27, 2010

I have a telephone connection of 1 mega internet modem huawei mt 880 SmartAX my desktop computer is connected via an ADSL PPPoE.I use Ubuntu 10.04 in Spanish and want to know how to connect a WiFi router TP-LINK TL- wr942nd to provide wireless Internet to other 2 PC, a desktop with a plaquet wireles G CNet CWP-854 and 500 series notebook olivetti olibook. The issue is that when I connect the router I can not even go online and do not know how to operate the network, I can not even connect the desktop to my internet provider

View 1 Replies View Related

Software :: Tata Photon In Suse - System Recognises The USB Device But Unable To Connect To Internet

Feb 1, 2011

Iam using suse linux desktop 10.0. when i connect tata photon USB modem for internet, the system recognises the USB device but unable to connect to internet. How to use tata photon in suse linux

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved