Ubuntu Networking :: Zyxel NWD-271N Usb Adapter Will Not Connect
Feb 9, 2011
I'm having some trouble getting my Zyxel NWD271N usb wireless adapter to connect.I'm using Ubuntu Desktop 64bit 10.10 What happens is that i'm always asked to enter the wpa key, and i've double and tripple checked that it's entered correctly. The wierd thing is that it has connected once or twice, but lost connection quickly, but i saw that i got an ip. I'm not sure about the maximum range on the adapter but i would estimate the distance to be no more than 4-5 meters from the wireless point. Also the signal indicator on the list of wireless networks shows strong, if not full. when i run lsusb i get:
Code:
Bus 001 Device 007: ID 0586:3417 ZyXEL Communications Corp. NWD271N 802.11n Wireless Adapter [Atheros AR9001U-(2)NG] when i run lsmod |grep ar9170 (saw the command on a german forum so i didn't understand what was talked about, but i got that it was about the same adapter) i get:
I'm using ZyXEL 660HW T2 router for my internet connection. The router is already set up.., my connection is working on winXP(just plug the cable and that's it). How to connect my suse 11.2 to internet? I tried to setup in YaST --> Network Settings
I have a Belkin N150 USB Wireless Network Adapter and a Belkin N150 Wireless Router. I cannot seem to get NetworkManager to connect to the internet. I have blacklisted the 9.10 staging driver and associated rt files. I have downloaded and built the ralink 2.3.0.0 driver. The light flashes on the usb but I cannot connect to internet.
lsusb output: jerry@jerry-desktop:~$ lsusb Bus 002 Device 003: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 002 Device 002: ID 046d:c50e Logitech, Inc. MX-1000 Cordless Mouse Receiver Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 046d:09c2 Logitech, Inc. Bus 001 Device 005: ID 050d:935b Belkin Components Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsmod output: jerry@jerry-desktop:~$ sudo lsmod Module Size Used by rt2870sta 554908 1
iwconfig output: jerry@jerry-desktop:~$ sudo iwconfig lo no wireless extensions. eth0 no wireless extensions. ra0 Ralink STA ESSID:"11n-AP" Nickname:"RT2870STA" Mode: Auto Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:1 Mb/s RTS thrff Fragment thrff Encryption keyff Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I am not sure what the ra0 is telling me but what about the Access Point: Not-Associated statement? Does that mean that the network adapter is not connecting to the router?
I picked up the computer for free (Dell P4 with no HD), stuck in a hard drive I had laying around and installed Ubuntu Studio 10.04 yesterday. I am completely clueless about how to do anything with Linux. I put in a Zyxel g-360 wireless pci card, and found the ACX111 driver online. I found the wiki here: [URL] Are those installation instructions? I can't understand what it says. I have the Zyxel installation disk for Windows XP if that helps.
I have Ubuntu 9.10, which I just now installed on my Dell Dimension 3000. The computer has all of its USB ports working perfectly; tested in Windows. I plugged in my SMC USB Ez Connect g wireless adapter, and it isn't even recognized by the system. I used lsusb, and nothing except the USB keyboard and mouse shows up. Every time I boot or shut down, I get tons of errors saying that it's "unable to enumerate USB device on Port...," then the port number of whichever port I plug the wireless adapter into. I've tried using ndiswrapper, and have completely installed the Windows drivers using that (which were the same ones that worked perfectly in Windows XP Pro). I've tried looking into compat-wireless and Linux Wireless, and have successfully installed the zd1211rw drivers and everything. The drivers install completely and work, there is just no hardware present, or so it says. This is what the terminal says when I type dmesg, and also part of what shows up on booting and shutdown:
[code]....
I hope I've given enough information. Oh, and I downloaded Ubuntu a few days ago from their website, burned to a CD-R, installed, and downloaded all updates that it asked me to. Other than that and the ndiswrapper and driver installation, I've done nothing on the system.
I have an HP Pavilion dv5 1002nr laptop running Vista. I decided to install Ubuntu using the windows installer, which did install well, but I decided that it wasn't for me, and uninstalled it. Now, my wireless adapter which is a Atheros AR5007 802.11b/g can see the network, find networks by itself, and is supposedly installed correctly according to Vista, cannot connect to any networks at all despite being able to see them and acquire a signal strength. Up until installing Ubuntu I have never had an issue like this. Other devices have no trouble connecting to this network, and I am currently using a Netgear wireless usb dongle to connect to the very network that my Atheros can not connect to.
I've just upgraded my old laptop from xubuntu to ubuntu 10.10 and I have some connectivity problems with my usb adapter Netgear WG111v3. On xubuntu I had no problems with connecting on the network but with ubuntu, it says I have good reception but it doesn't connect on the network (rarely it does, but for a very short time). I have another laptop currently running on ubuntu 10.04 and it has no problems at all (however it has an internal usb card).
I would like to access my NSA-220 Plus through the Internet without having computer turned on. I tried to set it up as a FTP server but I was not successful. I tried few tutorials but all allow me to access NSA-220 Plus only within my home network which is not what I want. Also I tried user manual which does not really tell you how to do this.
I am using the Belkin wireless g usb adapter f5d7050 v1000 or at least that is what ubuntu says when I lsusb.
Code:
ceegee@Valar1:~$ lsusb Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 019: ID 050d:7050 Belkin Components F5D7050 ver 1000 WiFi
i need to build an ipsec vpn between a linux debian server and a zyxel prestige, The debian server got 2 ethernets connection one for the internal network and the other one is public with a public ip adress.I need to know what i need for the build the tunnel, could you please let me know what i need? Let me explain i have only to configure openswan or i have to configure the iptables or somethings else too? I found this one do you think this would be work for me? [URL]..Is debian a right distro or should i try someone else?
My laptop has an internal wifi adapter, but I recently purchased another one because of its extended range.susb, shows that the new adapter is:
Code: Bus 002 Device 027: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter After disconnecting my internal adapter from the wireless network, I can scan for networks
I currently have a Nexxt Lynx 150 Wireless USB adapter attatched to one of my home destops to recieve my wifi signal, however, i have run into a speed bump in terms of getting it connected to my ubuntu 11.04. This adapter works perfectly in windows and on the ubuntu live cd, but, when i install ubuntu to my hard drive and try to connect to my network,
it just takes a very long time, then says, disconnected. My signal is WPA2-Personal protected. Here is a link to the adapter's home page > [URL] It seems to me that this is a driver problem. The cd that my adapter came with has drivers for linux on it, but i havent the slightest clue how to use them.
We need to fina a wireles adapter that works with Ubuntu.We have a netgear adapter but the OS doesn't recognize it when we plug it into the USB port and there isn't software to install so it will recognize it - only Windows documentation.My daughter loves this OS and wants to keep it but can't connect to our wireless network without an adapter.
WG111v2 USB that works just fine on my Ubuntu 12.04 Dell can't connect on my Debian Gigabyte. It finds the network name just fine, remembers its password, and tries to connect 3 times before giving up. This tower is 4 days old, as is the OS.
I recently moved out of state and don't have access to the net, however the neighbor of where I am staying is nice enough to let me leech off of her network till I get going. I know next to nothing about slackware and wireless networks since I have never had to mess with it. I have done my reading and have gotten this far.
1) wirelss card is installed and recognized, its a PCI b/g card that uses the ath5 module. The module is loaded and seems to be working.
2) I have heard wicd is easy so I installed it from /extra and it found my essid and accepted the wep password and it says connected at 45% and shows an IP.
however when I launch firefox or try to ping out nothing happens.
I felt the urge to build my own "Incredible PBX" system, and in the process downloaded pbxinaflash-i386-5.4.iso which is based on CentOS 5.4. The PC that I'm using is an old desktop, and the onboard ethernet adapter is not working, so I installed Trendnet PCI Adapter (te100-pciwn h/w : 2.2 R), which used to work greatly under Windows XP. Since my on-board ethernet adapater doesn't work, I disabled "eth0" device, and I modified eth1 device to load during boot. But, for whatever reasons, eth1 fails to get the IP address. I thought the driver that is part of CentOS 5.4 may not be working, so I thought of building the driver from the files provided in the CD (that came with TrendNet adapter box).. and unfortunately my attempts to build the driver have also failed.
Following files are attached in the zip file - basedata.R3721 (info collected by ./getinfo.sh all ) - Directory 2.2.X has "te100.c, makefile, kern_compat.h copying.txt" (These files came with the Trendnet CD) - errors (makefile errors when tried to build te100 driver) From what I understand, TrendNet TE100-PCIWN is based on "Realtek Semiconductor Co., Ltd. RTL-8139" chipset. How to get my ethernet adapater (eth1) connected to internet.
I want to run snort through a web application with exec("snort -v -i eth0 ") php function.for example when start button was pressed snort should be run,but the execution failed with this error:but when I run snort command via command line as root it will execute successfully.I think this problem is for that apache user haven't access to network adapter, is my guess correct? I have no experience with apache, should I change apache configuration? what is the configuration for this problem.I think I should find a way to allow apache to access but I don't know how?
I recently tried to install Crunchbang on my IBM Thinkpad T20 laptop. Everything went OK as far as I can tell (I still have to adjust acpi and display settings), but I cannot get my laptop to connect to the internet via wireless (wired connection works fine). I've done a good deal of searching online, and I realize that my wireless adapter (wpc54gs, bcm4318 chipset) is problematic in linux, and that b43-fwcutter is typically required. I did install b43-fwcutter, and it seemed to install OK, but nothing subsequently happened when I opened networkmanager. I'm not sure at this point if my problem is that I don't know how to configure any wireless adapter in crunchbang, or if it is that my particular adapter is not being recognized.
I've setup a CentOS apache web server, and loaded a site onto it. The site previously was functioning under windows xp (before I "stepped in") and wamp. What I did was copy the site in /var/www, reconfigure the httpd.conf (DocumentRoot /var/www/site, etc). Although when I try to open the webpage I get this error: Database Error: Unable to connect to the database:The MySQL adapter "mysql" is not available.
Migrated bunch of RHEL4 servers from one enclosure to another. Could not connect to SAN as adapter state was showing "DEAD". These are Proliant BL460 and BL680 Blades with native RHEL QLA2300 and QLA2XXX drivers. It only happended to RHEL4 servers and no issue found with RHEL5.x servers.
I just purchased Buffalo Nfiniti Wireless USB Adapter (WLI-UC-GN) but have no idea how to get it to work in Ubuntu. My previous adapter (a D-Link) just had to be plugged in and it was ready to go. The WLI-UC-GN adapter lights up (stays solid though), but no wireless networks are found. I believe Ubuntu sees the adapter, it just isn't working with Ubuntu.
I have read a few other posts but them a little confusing. If any one could please help me and keep it simple (I'm fairly new to Ubuntu); I would be grateful. By the way, I just upgraded to Ubuntu 10.04 from 9.10 last night hoping I am also using WICD Network Manager because I heard it's better than the native manager.
I have installed ubuntu lucid 10.04 release, and i want to install a wireless adapter usb or pci in my desktop. Can somebody recommend me a model that works fine?
I am running a dual boot PC, Ubuntu 10.10 & Win7. I do sticky static IPs on my local network, but it doesn't work cause the Ethernet adapter gets a different MAC address in Windows 7 (EF:9F:E9:F7:F7:F7) than it shows for Ubuntu 10.10 (00:13:74:00:5C:3. I am not sure if this is a Windows problem or something up with Ubuntu. The card is an on-board Atheros L2 fast Ethernet adapter. I have tried updating the drivers in Windows & nothing is working.
I have tried a couple of wireless adapters (USB dongles) but none of them work all that good on Ubuntu. I keep loosing connexion when on Ubuntu while on Windows (dual boot) there never seems to be any problems, so signal strength is probably not the issue. I bet it's a drivers problem so what I want to know is which adapters work really really good/great/fantastic on Ubuntu? The first option, wext, was chosen when I installed Wicd (running side by side with GNOME Network manager).
