I'm installing Lotus Domino on Linux Server. Did anyone know how to reverse proxy for HTTP and POP3/IMAP on linux ? I've problem when try to open webmail from internet. I can't access webmail and POP3 from internet. Seems because connection from internet can't directly to Domino through Firewall. If using apache seems no problem with the webmail, but POP3 still can't access.
View 5 RepliesI am using squid proxy in my office , now I can not access the webmail url is url.
View 5 Replies View RelatedI was having a hard time configuring ubuntu server with command line so this is the steps I did to install the GUI;
Code:
then
Code:
then
Code:
The GUI started up fine and I logged in as root, then I tried Update Manager and received this error message:
Requires installation of untrusted packages
I tried this in terminal window
Code:
and got
W: Failed to fetch [url]........(-5 - No address associated with hostname
So I did System Testing and got the result that my network was fine but my internet failed!
I could do command line update no problem before installing GUI. I can see it on the network on another computer though.
Trying to setup without the GUI is starting to look easier than with.
My server listens to POP3/IMAP requests. Some users have configured their mailers with high checking frequencies, say once every minute, such that the system logs are full of entries with no significance at all.I'd like to ask if there is a way to limit the per IP frequency of POP3/IMAP access ?I'm using "xinetd" to wrap the "ipop3d" and "imapd" which come with the Alpine package.
View 4 Replies View RelatedHow can I download Mail from Dovecot POP3 Server to new Dovecot POP3 Server of all users and will always run every minute. I've tried fetchmail and getmail but only in one user and need to run fetchmail or getmail to retrieve new emails.
View 6 Replies View Relatedi am getting error message when installing lotus on linux machine
"Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
edit your shell's DISPLAY environment variable to reflect an unlocked terminal that you would like to launch the Domino Setup Program on."
I have a linux box (fedora) with two ethernet cards eth1 and eth2. On eth1 I successfully configured a PPPOE internet connection. Such that from the server I can browse the internet. On eth2 I wired it to a wireless router essentially to provide the wireless cloud. On eth2 I also configured dhcp, such that the Linux box is both PPPOE and DHCP server.However my clients on the LAN cannot access the Internet.
On passing the routing command I get
Destination Gateway Iface
196.44.x.y 0.0.0.0 ppp0
192.168.1.0 0.0.0.0 eth2 (my subnet)
0.0.0.0 0.0.0.0 ppp0.
The router (functioning as a wireless access point mainly) has a fixed IP address of 192.168.1.2 and eth2 has IP address 192.168.1.1. The dhcp file running on Linux has been set with option router (Gateway) 192.168.1.1. I cannot figure out how to correctly set the routing table such that my clients on wireless can access the internet cloud. I googled and googled but no solid solution. Any suggestions?
I joined a company as an IT staff 2 months plus back. I now encounters a problem that the booting up hangs at the time when it is starting domino services. I have no clue where to look at and duno where to start checking. A little description of the server. : It's a lotus notes domino server for employees webmail service. -> Now it is down. it's an external dns server: recently high volumes of query cache denied surfaces. it's also our proxy server. The only way to get it up and running is to turn off domino service. The system is running still with high volumes of queries I last checked.
Althrough it can boot up now and DNS & proxy are running, I couldn't access the system anymore. It will hang when I attempt to log in from the command prompt. Below is an illustration:
iasaix login: root -> I attempt to log in using root user
password: xxxxxxxx -> I keyed in my password
-> The cursor comes down and just keeps blinking and nothing happens.
Remote access is not possible as it has sshd disabled by default. Our employees cannot access their webmail now, which is a major issue.
I tried to install Lotus Notes 8.5 client on my opensuse 11.2 machine, the installation process goes smoothly but i couldn't find any short cut to run the software !!! nor in the desktop neither in the Recently Installed sub menu !!
View 7 Replies View RelatedId like to ask you some advice. Im currently using as mail server Lotus Domino. Because of many reasons I need to create an SMTP server that receive the email from Dominothat relay those email into an authenticated SMTP on the internet. How can I do that? I create a Debian virtual machine and I installed Postfix. I edit the config file and set the relay host (authenticated SMTP on internet),the mtp_sasl_auth_enabled and smtp_sasl_password_maps parameters. If I try to send an email using that SMTP server I got a message that say âśRelay access denied, check the email address†What did I do wrong
View 5 Replies View RelatedI have successfully configured a local imap mail server following these instructions: url
Now I would like to make it available via webmail too.Is there an easy to install and configure webmail package?
I need to migrate data from Lotus Notes (LN) to MySQL system. I googled around, but didn't find much information about it. The LN has an option to export data like Lotus 1-2-3, which allows you to open the data into excell, but nothing apparently to MySQL. I also opened the MySQLMigration-ToolKit. In the import DataBase System, it doesn't appear LN as an option of supported systems. We are trying to keep things using freeware and cross-platform, although sometimes providing final customer products that run on MS. There is any tool available around, or should we go and code the routines to read the tables from Lotus to MySQL using a programming language like C?
View 3 Replies View RelatedFor long-term migration from courier to dovecot I would like to install courier-pop and dovecot-pop3d simultaneously. Aptitude offers me to install one, by removing the other, only. Can this be done without creating problems for the package manager and future upgrades? And why if not?
The following NEW packages will be installed:
The following actions will resolve these dependencies:
Remove the following packages:
Score is -170
I have a Toshiba M400 tablet laptop. I installed SuSE 11.2 and have connection to the internet via internal wireless connection to modem zoomtown. I click on mozilla or konquorer but get a blank webpage. I've tried everything I can think of but have not been successful.
View 6 Replies View RelatedMy wireless card: TP-LINK 322G + I ask, after the installation is complete debian5.04, how to configure wireless Internet access,
lspci entry:
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
[Code]...
I'm currently working on a project in a secure environment with no internet access and I need to install Ettercap and Wireshark on the machines. I thought this would be a simple task of loading Wireshark onto a USB but this did not work and replied with error messages such as: ' Invalid config x86_64-unknown-linux'
what does the error message mean and do I need internet access to install the apps?
I have recently set up a mail system using Postfix, Dovecot, Spamassasin, ClamAV and atMail - I'm new at this, so proud of myself to have gotten this far. I have required secure authetication for both sending through SMTP and access via POP3 and IMAP. All seems to work properly. I have tested POP3 with KMail and Evolution and everything works great. The only problem is I cannot get Outlook 2007 to authenticate for POP3. I can send through SMTP with secure authentication from Outlook, but no matter what I try I cannot get it to authenticate for POP3 access. Checking SPA in Outlook causes it to repeatedly ask for credentials which it does not accept, while un-checking it causes the client to be immediately rejected by the server.
I have turned on all the various relevant client work-around options in Dovecot and Postfix (that I am aware of) and I have hunted through the web to see what I can find, but no luck.
Besides using the listed client work-arounds in the Dovecot config file, can anyone shed light on what else I might need to do to get Outlook 07 working with POP3?
I am trying to launch the IBM installer on RedHat ES 5.2 and getting "the installer is unable to run in graphical mode". I am able to do xclock and made sure the export Display=:0.0.
View 3 Replies View RelatedWindows 2008 R2 Enterprise Edition, hyper-v install Windows 2003 R2 for normal Internet use.hyper-v no Internet access after installing ubuntu10.10 64bit is the use of the legacy network adapter, whether or static MAC address and MAC address spoofing is not the Internet,ubuntu network card settings should be no problem.?
View 1 Replies View RelatedWhat distro is the easiest for a new person to get started? I also need wireless internet access. I've tried to do this once before with linux (mandriva as I recall, I gave up)before and had problems installing the programs that would allow that. Also are there Linux versions that I could install on my pocket PC?
View 8 Replies View RelatedI used to have this setup on an old server and i'm trying to move it to a new server.I have a new box installed with Ubuntu 10.10, sendmail, courier-imap and courier-pop.I've configured virtusertable/local-host-names/virtual-domains/sendmail.cf and such.Everything is set up to take any mail arriving to @mydomain.com and move it to a user called "mobileinbox".When i log in as mobileinbox (su mobileinbox) and check my inbox using mutt, i see all the e-mails , but when i login from the outside using pop3 or imap , it says i have no new emails.
View 2 Replies View RelatedI use openSUSE 11.1 since quite a bit and I frequently use YAST (not as root of course). However, since the problems I have to deal with while trying to install WiFi internet access I meet the following problem. I call YAST, get the small authentication screen, I give the right password, which seems to be recognized as such, but I never see YAST appearing. So I can't manage neither my hardware, nor my software.
View 9 Replies View RelatedInstalling from Live USB: Installing from USB on my desktop (used this method for laptop install) goes without a hitch. EXCEPT, I notice there is no support for my wireless card chipset (Atheros 7413, used /bin/lspci to find). I download the drivers for Linux, but I need Make to build the drivers...ok. I download the Make files from my laptop, make coffee, slap the makefiles onto a flash drive and run the configure file on my desktop version of SUSE. Whoops, need a c compiler (odd that openSUSE did not come with gcc? bit confused on that). If you can't tell by now, I've been using linux for less than a month so I am what you would call a noob? After the lack of c compiler, I drove to my office to snag some DVDs to download the DVD iso image, hoping it would have some form of c compiler/make packaged, since the description does say the DVD has more software (can't find any prebuilt versions of either...?)
Installing from DVD: This was my next step. I wrote the iso image to a DVD and proceeded to boot from DVD. The installer fails at the system analysis, saying it cannot "create a repository". writing the iso to a second DVD produces the same result. Googling has not yielded a solution. tl;dr can't use openSUSE on my desktop because my wireless chipset is not suported by SUSE. I need Make to build the drivers, but I need a c compiler to compile Make, and I need the internet to get both for my machine.
What is the fastest setup to do this? All I want is an internally authenticated webmail server that other servers can send mail to for collection of test emails. Don't need LDAP or anything fancy, just a internal LAN only webmail server. I've got Squirrelmail setup on Ubuntu Server and can't get authentication setup with Squirrelmail and every tutorial I read is way over complicated or has nothing on how to authenticate Squirrelmail with internal, system users.
View 4 Replies View RelatedI am not really that good with linux, yet, I have a smc 2602W v3 wireless pci card, and I want to install it on linux, so I could access the internet, but I haven't found any solutions yet. Btw latest ubuntu desktop version. Info about the card: [URL]
View 3 Replies View Relatedhow postfix is work through webmail
ie purpose of Main.cf file, Virtual file, aliases file, Master.cf file, Transport file. How Postfix Works inside.
I have a linux webmail server which is old version. How should I upgrade this server?
View 3 Replies View RelatedI've set up Ubuntu 9.04 (desktop) at home in a lab environment (workgroup rather than domain) and have configured Squid. Everything works fine but, when I took it to the next level and made the proxy transparent, my problems began. I can still access sites (having pointed the XP Pro client to the squid box as the DG) and the sites are logged in /var/log/squid/access.log but I am unable to use Outlook to access my SMTP and POP3. I guess that the setup is blocking ports 25 and 110 and I'll need to configure iptables to forward packets destined for these ports directly to the "real" DG, rather than the Squid box. Here's the set up:
A single NIC (eth0) on 172.19.0.250 / 16 (static) ADSL router ("real" DG) on 172.19.0.1 I executed iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 3128 My squid.conf:
Code:
acl all src all
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8
acl localnet src 10.0.0.0/8# RFC1918 possible internal network
acl localnet src 172.16.0.0/12# RFC1918 possible internal network
acl mynet src 172.19.0.0/16
[Code]....
I am trying to set up a Horde Webmail service on my server.Sent emails are not copied into the sent-folder when sent by the user, but there is no error or log-entry.
View 9 Replies View RelatedHow do my user change password in webmail because there is no option to change password in my webmail. How to change password in webmail. I am using centos5.
View 1 Replies View Related