I am trying to launch the IBM installer on RedHat ES 5.2 and getting "the installer is unable to run in graphical mode". I am able to do xclock and made sure the export Display=:0.0.
View 3 RepliesI am running Lotus Notes on top of openSuSE since 10.3 and version 7 of Lotus Notes. The last packages provided by IBM (8.5 and 8.5.1) provide a smooth and easy way of installing it through rpm packages. Some issues had appear and I solved them (or lived with ), but this time I did a full fresh install of 11.2 64bits. I then install the brand new packages of Notes 8.5.1 and had the following problem : The Notes GUI wasn't able to display some elements of the interface (i.e. small view of calendar, search bar, popups, Notes basic settings in the properties etc...). Searching by big blue, I found out a solution for Ubuntu that I customized for openSuSE 11.2 64bits.
Step one : Install Lotus Notes: Have a copy of the .tar package from IBM. untar it into a new directory. With YaST add the directory to the repositories Install all the packages provided (the ones with Symphony are really optional).
[Code]....
I am trying to get Notes to run on Ubuntu 9.10 karmic x64 and haven't had any luck. I started off by following the steps from the following location [URL] This didn't work and I had the symptoms listed below. I then looked at the following guide and did all the steps that were not on the above link: [URL] However I still had the same issue. So the symptoms:
1) I don't see notes in the apps->office menu, but I am able to start it via:
cd /opt/ibm/lotus/notes/framework
../notes
2) I get the login window and am able to go through the setup (pointing to the notes id file, and my domino server etc). However at the end of it all, no GUI is displayed. Even though lnotes shows up in the running processes.
3) In the terminal window I get the following error:
Gtk-Message: Failed to load module "canberra-gtk-module": /usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so: wrong ELF class: ELFCLASS64
(:6077): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libmurrine.so: wrong ELF class: ELFCLASS64
(:6077): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libmurrine.so: wrong ELF class: ELFCLASS64
[code]....
With the release of Lotus Notes 8.5.2, it looks like Ubuntu 32bit support is there, however I am running 64bit Ubuntu 10.04.
I had 8.5.1 (32bit) installed and it was working fine. I did take alot of tweaking to get it running.
Just wondering if anyone has tackled the new 8.5.2 which is supposed to be much nicer in Ubuntu.
I've tried removing the old 8.5.1 and the install for the 8.5.2 doesn't really work correctly even with "--force" commands.
Always a challenge with Notes and Ubuntu Why they didn't make 64bit debian packages is beyond me.
I tried to install Lotus Notes 8.5.2 (deb package) on Ubuntu 11.04 64 bit. Unfortunately, Lotus is not able to complete the installation! I googled and I found a guide on IBM forum (but for 10.04 release) and on [URL], I installed required dependencies (ia32lib, all getlibs, ecc) but I am not able to continue the installation. I tried to install in different Ubuntu release. Here a summury:
- Ubuntu 10.10 64 bit: Lotus Notes and FP2 install and works fine
- Ubuntu 11.04 32 bit: Lotus Notes and FP2 install and works fine (also in Unity environment)
- Ubuntu 11.04 64 bit: Lotus Notes cannot install.
[Code]..
I use Windows XP and Ubuntu 10.04 using Dual Boot in my notebook, but the company that I work support just the Windows XP. I work with Lotus Notes on Windows and I wish read nsf file on Ubuntu. As long as I know I should by Lotus Notes license for linux.
I want a software just to read nsf file in order to can see my e-mails storeds. Anyone knows some program for read nsf file?
I tried to install Lotus Notes 8.5 client on my opensuse 11.2 machine, the installation process goes smoothly but i couldn't find any short cut to run the software !!! nor in the desktop neither in the Recently Installed sub menu !!
View 7 Replies View RelatedI install Lotus Notes 8.0.1 on Karmic Ubuntu 9.10, the setup is successfully. However, the mail could not show correctly. the Home shows blank. The mail address could not show for each mail. And some html mail could not show at all.Below are the console output.
05/03/2010 03:42:49 PM Lotus Notes client started
2010/05/03 15:43:15.532 SEVERE err.csilabelprovider.fetchimage.exception ::class.method=com.ibm.rcp.csiviews.providers.CSIL abelProvider$1.run() ::thread=Worker-5 ::loggername=com.ibm.rcp.csiviews.providers.CSILab elProvider
[code]...
I'd like to do a fresh install of newly released Jessie with only Xfce in a graphical installer. When I come to the point where i have to select the DE to install, there are options: Debian desktop environment, and then ...GNOME, ...Xfce, ...Lxde etc.
I guess that with the first option, it's like in Wheezy - it installs the default, which is gnome. But if i choose the ...xfce option, do i have to keep the 'debian desktop environment' option checked, or will that just install gnome alongside Xfce? Do i have to check only Xfce as an option?
I'm facing a problem installing Fedora 12 x64 on my desktop.I've been trying to get the Graphical Installer (anaconda) to run, in vain. The error message I get is reproduced below:
Code:
(EE) [drm] drmOpen failed
(EE) NOUVEAU(0): [drm] error opening the drm
[code]....
I need to migrate data from Lotus Notes (LN) to MySQL system. I googled around, but didn't find much information about it. The LN has an option to export data like Lotus 1-2-3, which allows you to open the data into excell, but nothing apparently to MySQL. I also opened the MySQLMigration-ToolKit. In the import DataBase System, it doesn't appear LN as an option of supported systems. We are trying to keep things using freeware and cross-platform, although sometimes providing final customer products that run on MS. There is any tool available around, or should we go and code the routines to read the tables from Lotus to MySQL using a programming language like C?
View 3 Replies View RelatedCan anyone tell me what names the tomboy notes application gives to its notebooks and notes? Not the file format (xml) I found that on the web, but the filenames and directory where it stores things.
View 2 Replies View RelatedHas anyone else here had a problem getting virtual terminals to work when booting into F15's 'graphical mode'? This is what used to be runlevel 5 in the old SysV init system, before the switch to systemd. Before F15, I could do a Ctrl-Alt-F[n] (for n=1,...6) to get virtual terminals while in runlevel 5, and this was easy to control by editing /etc/inittab.
But with systemd, /etc/inittab is no longer used, and finding where the virtual terminals get created took me a bit of time. I tracked it down to the /lib/systemd/system/prefdm.service file, which seems to stop creating virtual terminals after tty1 in order to prevent the display manager and plymouth from conflicting on that virtual terminal. I'm using the Slim display manager (installed via yum), and I only got tty1 (showing console messages), tty2 took me back to X, and there were no tty3-6 any more. I noticed from ps that there was some kind of "plymouth --wait" process running, so I killed it. After doing so, the other virtual terminals showed up. Has anyone else here experienced something similar?
It appears that /lib/systemd/system/plymouth-quit.service is not exiting properly, and this is causing the problem. This problem only occurs in graphical mode, not in console mode (what used to be runlevel 3). My first solution was to put "/bin/plymouth quit" in /erc/rc.d/rc.local, and upon rebooting that did indeed fix the problem. But eventually I just removed plymouth altogether, which also fixes the problem. It would be nice though if plymouth-quit.service just worked as it was supposed to. I'm just wondering if anyone else has seen this problem.
I was reading /usr/share/kde4/config/kdm/kdmrc and see this 3 lines:
# Allow root logins?
# Default is false
#AllowRootLogin=false
this doesn't mean that root can't login in a graphical mode? (I can login as root)
[Code]...
I was using win-7. I tried to install RHEL 6 today. [dual boot]/ = 40000 MB and /boot = 1000 MBThe installation completed successfully.The problem is that it is not showing the graphical mode. Only the terminal mode is available. I tried chvt 1-7but I am unable to go to the graphical mode. It is not appearing.What should I do? System config:MSI CR420 Laptop.ntel core i3-350MEdited after following user76871's answer:There is no Xorg.0.log file in /var/log/, There is no xdm in /etc/init.d/, there is no kdm also.I tried startx that also didn't work. I tried system-config-display but the display is not available at system-config-
View 2 Replies View RelatedI'm having a problem booting Ubuntu. Last time I used Ubuntu I did 2 things that might have caused this:1- I added a repository to my software sources:
Code:
deb http://ppa.launchpad.net/xorg-edgers/ppa/ubuntu (lucid main #xorg-edgers PPA)
deb src http://ppa.launchpad.net/xorg-edgers/ppa/ubuntu (lucid main #xorg-edgers PPA)
[code]....
I have just been using distro's that install with a graphical interface, but some of the distro's forum members recommend are installed text mode only. How difficult is a text mode install
View 9 Replies View RelatedNeed your suggestion for below issue :
Operating System : LINUX RED HAT 9.
Problem :
The OS reboots normally.
and monitor stay on upto before getting into graphical logging window.
Once it try to get into graphical logging mode, the monitor keeps on and off
I can access Linux Box remotely. The server is fine.
I cannot get into logging prompt locally.
It was working fine before.. I am not sure if I have made any changes.
How can I reset to default settings so I can get to logging mode locally.
Having turing power off on Bios will that help ?
Could anyone telme how to go from text mode to graphical without restart.i know we need to change in /etc/initab as runlevel 5.but i want to do this without RESTART.is there any method.currently runlevel is at 3.PLZ TELME I CANT RESTART BCZ ITS PRODUCTION SERVER.
View 7 Replies View RelatedI'm installing Lotus Domino on Linux Server. Did anyone know how to reverse proxy for HTTP and POP3/IMAP on linux ? I've problem when try to open webmail from internet. I can't access webmail and POP3 from internet. Seems because connection from internet can't directly to Domino through Firewall. If using apache seems no problem with the webmail, but POP3 still can't access.
View 5 Replies View RelatedI want to switch to Ubuntu 9.10 but the computer always freezes 30 to 45 seconds after entering the graphical mode. This includes the 64bit installer, the 64bit live CD version and I even installed the 32bit version with the alternate install CD (text-mode). In all 3, I can use the system (e.g. log in, click Next) just fine for half a minute, then it crashes. It even crashes if I don't do anything.
Here are my hardware specs:
MB: Biostar TF560 A2+
CPU: AMD Athlon 64 X2 Dual Core 5000+
RAM: DDR2 800 Dual 128 bit, 2T (4GB)
GPU: ATI Radeon HD 3870
The sound and network cards are integrated but I've tried disabling them from BIOS as well as removing all hard drives and the problem persists. I have also verified the CD successfully. Note that right now I'm using SLAX from a CD as I formatted my hard drive (so at least some Linux works).
Is it possible to instruct Ubuntu to start up (GUI) Graphical User Interface mode from (CLI) Command Line Interface mode? In the old days, you can type "win" in DOS to get into Windows - something along that line. Is it possible for Ubuntu in this case?
Yes, you can reboot to switch between the modes, but shouldn't there be a command for this?
I am facing the problem that when I login to the machine in graphical mode the machine get reboot and same time when I login to the same machine through ssh using another machine, it is successfully login to that machine,and also ,if I do ctr+lalt+f1 and login to the machine in text mode it also works,
I am using Centos 5
I have kubuntu 9.04 installed in my computer and I am normally using a Gnome environment desktop (though I get back to KDE or Xfce if I have any troubles with Gnome)
This afternoon I restarted my computer and since ever I am unable to log in. I press the on button, get to the partition page and select Ubuntu 9.04 and the computer shows the login page
however, once I type in my password, the computer tries to log in but then brings me back to the login page asking for the password again. I have tried to login as Xfce, Gnome, KDE, Failsafe mode and the result is the same. The only way to get through is to login through the terminal, but then I am unable to get back to the graphical mode.
Sometimes I would like to start XBMC on my media center using my laptop. I manage this system fully via SSH, but there is one thing that I don't know how to do, or know if it is even possible. I would like to start XBMC from my laptop so that I don't have to reboot the machine in order to do that (XBMC launches upon boot). Is it even possible to launch a GUI on a remote computer using SSH, and if so, how?
View 9 Replies View RelatedProblem installing graphical mode of red hat 5 on virtual software. But text mode is getting installed but its also taking more then 1hr. I've adjusted all the recommended options regarding memory,hard disk ,etc. Also please suggest me good virtual software for red hat enterprise Linux 5.
View 5 Replies View RelatedI had tried to install Centos 5.3 using the graphical interface but it gives me a black screen with no response. I've read into it and installed in text mode but still need a graphical interface. Whats the command/steps I need to take?
View 1 Replies View RelatedI'm getting a "Server Error Something has gone wrong (500)" when i try to access the notes page for several days now. When will it be OK?
Bug report:[URL]
Just now:
Something has gone wrong (500) This is a robot
We've recorded this problem and it will get investigated with the logs. If this problem is urgent, please file a bug report and include this number: OOPS-ID-1534appserver79128
When I start my ubuntu linux system it automatically logs into a user (not root) in graphical mode and it does not asking for any password. when I try to go to the command prompt the password is required. How do I give password for my user. The provider installed the system and not me..
View 5 Replies View RelatedI'd like to install Fedora12/13 on a external USB 2.0 HDD. Ive managed to do so with the live image several times, but the DVD installer does not see that particular USB HDD so I cannot install Fedora on it. Its the same with F12 and F13.Ive already tried to start the installation in expert mode. The expert option is ignored or something (linux expert/expert does nothing). Im not sure where exactly to write the options. I chose the rescue line and changed rescue to expert (nothing happend).
Then Ive tried Ctrl+Alt+F2 > "modprobe usb-storage" with no output (that should be right, right?). Again nothing.How to start anaconda (the DVD installer) in expert mode?How to load proper modules (to get the USB Drive to be recognised)?How to install Fedora12/13 from DVD onto USB2.0 HDD?