How can I download Mail from Dovecot POP3 Server to new Dovecot POP3 Server of all users and will always run every minute. I've tried fetchmail and getmail but only in one user and need to run fetchmail or getmail to retrieve new emails.
View 6 RepliesI'm somewhat familiar with Linux and became pretty decent at installing and configuring packages in Ubuntu. One of the things I was able to do with my tinkering was set up a functioning imap and pop3 mail server using dovecot-postfix. Now I'm experimenting with Slackware to get the feel of another distro, and I noticed that the mail server packages were already installed. On my client computer they can pick up that I have users configured and my mx record is working.
However it is failing to send mail saying that it is failing to relay the e-mail message and that the server responded 5.7.1 which was a problem that I was having in Ubuntu when first configuring the mail server. The fix was to edit the postfix.conf file and adding the localhost name of my server. Does anybody know of the file that I need to edit to make it possible to relay my messages with both pop3 and imap.
I am trying to install Mozilla Thunderbird email client. When I configure this program, it defaults to IMAP4-type incoming mail server (Port 143) instead of POP3 (Port 110) which my ISP uses. I did not see POP3 anywhere in the available dialog boxes. Is there any way to get Thunderbird to use POP3 in opensuse 11.2 Gnome Edition?
View 3 Replies View Relatedhow to set the following requirements:1-user1 must be be able to retrieve email from my m/c using pop3 from within domain example1.com.2-users within domain example2.com should not have access to my pop3 services
View 1 Replies View Relatedi've been tryin to configure sendmail with cyrus to create a mail server that'll allow outlook users to connect to and download mails. I've done a lot of googling but so far no success have been able to configure sendmail with cyrus but can't connect the outlook to the server. I've come across certain documentation that says it requires to configure saslauthd. Is there any way i can create a mail server to which users can connect and download their mails. Shall i switch to postfix and dovecot instead? Is that easier?
View 14 Replies View RelatedHow can mail attachments be downloaded from a POP3-supporting mail server and saved as local files? I've looked into a variety of mail clients and studied mbox, maildir and MIX but no solutions are jumping out and saying "It's me you're looking for!" (story of my life ) The requirement is for an organisation with no document management system; as a first step I want to get all their files in one place, including files that may exist only as email attachments.
View 8 Replies View RelatedFor long-term migration from courier to dovecot I would like to install courier-pop and dovecot-pop3d simultaneously. Aptitude offers me to install one, by removing the other, only. Can this be done without creating problems for the package manager and future upgrades? And why if not?
The following NEW packages will be installed:
The following actions will resolve these dependencies:
Remove the following packages:
Score is -170
Originally Posted by http://salcedoweb.com/rds/server.htmlUncomment or add line in /etc/inetd.conf:
# Post Office Protocol version 3 (POP3) server:
pop3 stream tcp nowait root /usr/sbin/tcpd /usr/sbin/popa3d
How do I add an account so I can access my mailbox from M$ Outlook from a Windows 7 machine?I am planning on using my ISPs smtp server for sending mail.Or is there anything else I should be aware of?http://www7.pic-upload.de/21.04.11/ieg6wv3qx6g.jpg
i have some problems to start my dovecot server. I tried to install it from webmin using "un-used modules" but it was allways the same error: "E: Unable to locate package dovecot-pop3d".When I tried to install it from console using the commands: apt-get install dovecot-imapd dovecot-pop3d dovecot-common - and there are no problems with dovecot-imapd and dovecot-common, but still the same error with dovecot-pop3d. After command: service dovecot status: could not access PID file for dovecot ... failed!
After try to start dovecot with comand "dovecot": Error: mail_executable: Can't use /usr/lib/dovecot/pop3: No such file or directoryFatal: Invalid configuration in /etc/dovecot/dovecot.confI've read a few similar threads in this forum about dovecot errors but still can't to fix it.
I am having problem to collecting email from remote POP3 (all the emails for a domain is stored here) and distribute it after collecting to several users defined to Linux server. I have install postfix in Linux server for email distribution.
View 3 Replies View RelatedI have been beating my head for the last few weeks on this problem, (although I have been taking the wrong approach, it seems).
I need a gateway to direct web traffic to three separate servers/domains. I have been trying to do this with both a dns server and , (seperatly), apache server to forward requests. The dns server was a no go, and <i can only get apache to redirect http and ftp.
After Googling this ALOT, I believe that what I need is a gateway server to redirect my traffic to the 3 different servers. I have been reading about using using nat and iptables for this and was wondering if anyone had any advice/suggestions on this. The other thought I had was to use something like pfSense to create the gateway, but I am still reading the documentation, and I am unsure if this approach will work.
I have installed Postfix with LDAP, Dovecot IMAP/POP3 Server on RHEL 5.5whether Postfix without IMAP/POP3 server is possible??
View 5 Replies View RelatedI'm a newbie here but I have a question on how to make the connection between webmin and thunderbird via POP3. I have webmin set up and it is able to send and receive mail via webmin but when I enter the account details in thunderbird it cant find the settings for my mail account. I'm not exactly sure where I need to go in webmin to set it up to allow a connection from a client to allow the downloading of mail to the client. Would simply prefer to go to thunderbird to send and receive mail as opposed to logging into webmin then going to my mail.
View 3 Replies View RelatedAccording to RFC 1939: "POP3 is not intended to provide extensive manipulation operations of mail on the server; normally, mail is downloaded and then deleted." However most of the mail clients have that option "Leave messages on server" after they have been downloaded. How is it done?
I tried sniffing mail traffic with Wireshark, but the only POP3 provider I have is Gmail and its POP3 access is SSL secured, so I was unable to gather any info from this... I tried downloading sources of Thunderbird and Evolution and checked what are they doing with "leaving messages", but it seems my C++ skills are not enough - I was unable to understand what is happening when "leaving"...
Suggest me some POP3 provider, that is providing unsecured POP3 access, so I could try again reverse engineering with Wireshark?
running debian 6.0 "Squeeze" I installed Evolution trough official debian squeeze mirrors, installed all available updates (that know off) but i still can connect to my POP3 (email) server.what does evolution need to connect to pop3 ? when use Kmail, everything works fine
View 11 Replies View RelatedMy server listens to POP3/IMAP requests. Some users have configured their mailers with high checking frequencies, say once every minute, such that the system logs are full of entries with no significance at all.I'd like to ask if there is a way to limit the per IP frequency of POP3/IMAP access ?I'm using "xinetd" to wrap the "ipop3d" and "imapd" which come with the Alpine package.
View 4 Replies View RelatedI use fetchmail to get mails from POP3, but I get an error if I use SSL.
.fetchmailrc
poll pop.server.de with proto POP3
user xxx there with password xxx ssl is "xxx" smtphost xxx
This cause this error:
[Code].....
It looks are some packages missing or something like that.
This is my first post to the forum
I've recently migrated my office PCs to ubuntu. My server doesn't server any big purpose but to provide Internet Connection to the rest of the nodes. Things were quite easier during the windows era using ICS.
Even in Ubuntu we were able to do it using the "shared network" option, simple & straight forward. But things got complicated only after installing "squid". Needless to say it brought in a lot of add ons as far as the http proxy serving is concerned & we are enjoying a better internet(http only) connectivity without any doubt. But we are not able to use our email clients, MS Outlook or Thunderbird
But to best of my knowledge squid strictly is a http proxy hence doesn't support handling requests on ports other than 80. (465 & 995 in my case)
Now I have two queries, 1. Can "Squid" really be used to do what I want here??? using iptables, port forwarding or any other mean
& 2. Can any one suggest a good pop3/imap proxy as good as squid is.
I want to retrieve emails from my POP3 servers to my home server. But from there, I want to be able to access them via IMAP from my other computers, i.e. desktop, laptop, phone. And then of course I want to be able to send emails from said devices via IMAP to my home server which POP3's them out to my mail servers. Basically, I have a few POP3 accounts with various hosts and I want to conveniently interact with them from lots of devices using my preferred software (i.e. Mutt, or Thunderbird on my Windows boxes). My home server is Ubuntu Server if that's relevant.
View 6 Replies View RelatedI'm trying to configure dovecot in RHEL6, but seems system won't accept local user login. I've already disabled pam. I've tried mutt -f imap://xxxx, and Thunderbird to connect as imap and pop3, but both failed, seems dovecot won't accept the password of the login user.the dovecot info log as, Jul 03 20:48:42 imap-login: Info: Disconnected: Too many invalid commands (no auth attempts): rip=192.168.1.3, lip=192.168.1.3, mpid=0, secured
#passdb {
# driver = pam
# [session=yes] [setcred=yes] [failure_show_msg=yes] [max_requests=<n>]
# [cache_key=<key>] [<service name>]
[code]....
I had installed opennms im getting email alert when all port are getting down and i also getting pop and imap messaage to whn th eport get dwn i want to stop asap mesage of pop3 and imap..whether its poasssible to block partilar imap and pop3 port .
View 2 Replies View RelatedI'm run 10.10 desktop x64 and when I start setting up an account in thunerbird and enter name, email address and password in the first window and go on to the next next that window flashes pop and imap very quickly before stopping with a showing of imap. There is no edit button and I have not been able to find out how to set the protocol to pop3. Is there and error? Or am I missing something. I like thunderbird and would like to continue using it but my email providers only support pop3. I'm writing to this list because I'm thinking the problem may be specific to my version of ubuntu but I'm not sure.
View 2 Replies View RelatedMy actual mail is via pop3 from verizon. What I've done so far is just pull my pop3 mail onto my main machine at my house. But I'm finding I'd rather have a single imap server on my network so then all my machines could see the same mail.
I don't really want the imap server to poll verizon for mail, I just want the imap server to check pop3 mail at verizon only when one of my mail apps checks into it to look for mail.
I'm installing Lotus Domino on Linux Server. Did anyone know how to reverse proxy for HTTP and POP3/IMAP on linux ? I've problem when try to open webmail from internet. I can't access webmail and POP3 from internet. Seems because connection from internet can't directly to Domino through Firewall. If using apache seems no problem with the webmail, but POP3 still can't access.
View 5 Replies View RelatedCentOS 5.4
/etc/init.d/dovecot start
Starting Dovecot Imap: Fatal: Protocol pop3 given more than once
Having my Diploma Final Project on setting up a virtual mail server within Local Area Network (LAN) only. I had follow this how-to [URL] and complete up to squirrealmail web mail. I added two new user to try on sending and receiving mail. It works. I run CentOS on VMplayer. I using my laptop to do all the stuff, the laptop default OS is windows 7, I install VM player on it and run CentOS inside the VM Player.
I want to do testing on Windows 7 side by installing Thunderbird email client program, I want to connect to mail server with SMTP, IMAP/POP3 using the email service. I have problem while setting up user account on Thunderbird, Thunderbird seems like cannot detect my CentOS mail server. How? Do I have to do any other configuration on CentOS? Any DNS? Port number for IMAP, POP3 or SMTP?
I have recently set up a mail server running dovecot and everything is fine. However, I now want to retrieve the contents of 2 pop mail boxes and insert them into the IMAP structure under dovecot. I need to check for spam and sort them according to sender and recipient.
What is my best software option for retrieving the mail?
I'm having trouble using my hotmail account on Evolution. It used to work just fine but I when I opened Evolution today the following error ocurred: Could not login on server POP3 pop3.live.com. Error when sending username: -ERR command not expected now It then asks me to put my hotmail password... which I do and the same error appears again. Can someone tell me what's going on?
View 1 Replies View RelatedTiscali had a problem Sunday night(24/25th) reported by a number of people.Passwords rejected, etc.My Windows Vista machine and Aspire One Linpus were both affected.Come Monday morning and the Vista machine now works but Linpus still doesn't.I haven't changed anything on either machine. Tiscali are (of course) not much help.I have now deleted and recreated the accounts with all the same data and ports, etc just in case(!) No change.
View 3 Replies View RelatedI need to make a bash scripting, based on a password and a user,that connect to pop3 server and see if it login,if you can,return ok, otherwise return ERR .
View 10 Replies View Related