My server listens to POP3/IMAP requests. Some users have configured their mailers with high checking frequencies, say once every minute, such that the system logs are full of entries with no significance at all.I'd like to ask if there is a way to limit the per IP frequency of POP3/IMAP access ?I'm using "xinetd" to wrap the "ipop3d" and "imapd" which come with the Alpine package.
View 4 RepliesI used to have this setup on an old server and i'm trying to move it to a new server.I have a new box installed with Ubuntu 10.10, sendmail, courier-imap and courier-pop.I've configured virtusertable/local-host-names/virtual-domains/sendmail.cf and such.Everything is set up to take any mail arriving to @mydomain.com and move it to a user called "mobileinbox".When i log in as mobileinbox (su mobileinbox) and check my inbox using mutt, i see all the e-mails , but when i login from the outside using pop3 or imap , it says i have no new emails.
View 2 Replies View RelatedI have installed Postfix with LDAP, Dovecot IMAP/POP3 Server on RHEL 5.5whether Postfix without IMAP/POP3 server is possible??
View 5 Replies View RelatedThis is my first post to the forum
I've recently migrated my office PCs to ubuntu. My server doesn't server any big purpose but to provide Internet Connection to the rest of the nodes. Things were quite easier during the windows era using ICS.
Even in Ubuntu we were able to do it using the "shared network" option, simple & straight forward. But things got complicated only after installing "squid". Needless to say it brought in a lot of add ons as far as the http proxy serving is concerned & we are enjoying a better internet(http only) connectivity without any doubt. But we are not able to use our email clients, MS Outlook or Thunderbird
But to best of my knowledge squid strictly is a http proxy hence doesn't support handling requests on ports other than 80. (465 & 995 in my case)
Now I have two queries, 1. Can "Squid" really be used to do what I want here??? using iptables, port forwarding or any other mean
& 2. Can any one suggest a good pop3/imap proxy as good as squid is.
I want to retrieve emails from my POP3 servers to my home server. But from there, I want to be able to access them via IMAP from my other computers, i.e. desktop, laptop, phone. And then of course I want to be able to send emails from said devices via IMAP to my home server which POP3's them out to my mail servers. Basically, I have a few POP3 accounts with various hosts and I want to conveniently interact with them from lots of devices using my preferred software (i.e. Mutt, or Thunderbird on my Windows boxes). My home server is Ubuntu Server if that's relevant.
View 6 Replies View Relatedi have some problems to start my dovecot server. I tried to install it from webmin using "un-used modules" but it was allways the same error: "E: Unable to locate package dovecot-pop3d".When I tried to install it from console using the commands: apt-get install dovecot-imapd dovecot-pop3d dovecot-common - and there are no problems with dovecot-imapd and dovecot-common, but still the same error with dovecot-pop3d. After command: service dovecot status: could not access PID file for dovecot ... failed!
After try to start dovecot with comand "dovecot": Error: mail_executable: Can't use /usr/lib/dovecot/pop3: No such file or directoryFatal: Invalid configuration in /etc/dovecot/dovecot.confI've read a few similar threads in this forum about dovecot errors but still can't to fix it.
I'm trying to configure dovecot in RHEL6, but seems system won't accept local user login. I've already disabled pam. I've tried mutt -f imap://xxxx, and Thunderbird to connect as imap and pop3, but both failed, seems dovecot won't accept the password of the login user.the dovecot info log as, Jul 03 20:48:42 imap-login: Info: Disconnected: Too many invalid commands (no auth attempts): rip=192.168.1.3, lip=192.168.1.3, mpid=0, secured
#passdb {
# driver = pam
# [session=yes] [setcred=yes] [failure_show_msg=yes] [max_requests=<n>]
# [cache_key=<key>] [<service name>]
[code]....
I had installed opennms im getting email alert when all port are getting down and i also getting pop and imap messaage to whn th eport get dwn i want to stop asap mesage of pop3 and imap..whether its poasssible to block partilar imap and pop3 port .
View 2 Replies View RelatedMy actual mail is via pop3 from verizon. What I've done so far is just pull my pop3 mail onto my main machine at my house. But I'm finding I'd rather have a single imap server on my network so then all my machines could see the same mail.
I don't really want the imap server to poll verizon for mail, I just want the imap server to check pop3 mail at verizon only when one of my mail apps checks into it to look for mail.
CentOS 5.4
/etc/init.d/dovecot start
Starting Dovecot Imap: Fatal: Protocol pop3 given more than once
Having my Diploma Final Project on setting up a virtual mail server within Local Area Network (LAN) only. I had follow this how-to [URL] and complete up to squirrealmail web mail. I added two new user to try on sending and receiving mail. It works. I run CentOS on VMplayer. I using my laptop to do all the stuff, the laptop default OS is windows 7, I install VM player on it and run CentOS inside the VM Player.
I want to do testing on Windows 7 side by installing Thunderbird email client program, I want to connect to mail server with SMTP, IMAP/POP3 using the email service. I have problem while setting up user account on Thunderbird, Thunderbird seems like cannot detect my CentOS mail server. How? Do I have to do any other configuration on CentOS? Any DNS? Port number for IMAP, POP3 or SMTP?
I'm somewhat familiar with Linux and became pretty decent at installing and configuring packages in Ubuntu. One of the things I was able to do with my tinkering was set up a functioning imap and pop3 mail server using dovecot-postfix. Now I'm experimenting with Slackware to get the feel of another distro, and I noticed that the mail server packages were already installed. On my client computer they can pick up that I have users configured and my mx record is working.
However it is failing to send mail saying that it is failing to relay the e-mail message and that the server responded 5.7.1 which was a problem that I was having in Ubuntu when first configuring the mail server. The fix was to edit the postfix.conf file and adding the localhost name of my server. Does anybody know of the file that I need to edit to make it possible to relay my messages with both pop3 and imap.
Is it possible in Linux to restrict POP3 or IMAP for particular users.I need a confirmation on this, that it is possible or not in Linux.
View 3 Replies View RelatedI'm trying to set up my gmail account with Evolution. I am trying to set up a mail client where -
1) All the mails are stored locally, so that I can work offline. When I reconnect, the client (Evolution) syncs with the server - sends emails and updates any changes.
2) All the labels/folder system to be respected and retained.
After struggling with various sites that argued Pop3 and IMAP (numerous blogs and google searches), I came across this conclusion (pls correct them if they are wrong)-
1) Pop3 allows mails to be stored locally, but will not break them up into folders.
2) IMAP will allow the folder system, but will only store the headers of mail on the local server, and the content will be downloaded as per request.
1) Will Pop3 access allow syncing between the local version and the server version? For instance, a mail read in Evolution should be marked as read when I sign into the web-interface as well.(I can always create a filter/rule that replicates gmail filters)
2) Will IMAP allow me to store all mail locally (isn't this exactly what IMAP is not!)? The combination of imap-gmail-evolution was not so successful when I tried it out - too slow!
PS: I would prefer Evolution over Thunderbird so that I can integrate the Calendar. However, if ThunderBird is the easiest solution, then it's fine too...
I'm trying to connect to Gmail to pull my emails from the Gmail site, via the IMAP/POP3 access server. However, I can't seem to connect to the server when in Ubuntu code...
And it hangs here indefinitely. However, if I reboot my PC into Windows, it connects fine. I've turned off UFW so I would expect the connection to work. I've also been able to POP3 into other servers, so it seems to be something specific to the gmail IP.
Anyone else had the same problem or know how I can debug/fix this?
Now, i want to change port smtp, not use 25
View 3 Replies View RelatedI would like to change an email account from POP3 to IMAP on an ISPConfig 2 system, I can see that the IMAP and POP3 process are both running.
I have the Maildir check box ticked for the server
Is there anything else I need to do, or is it just a case of changing the mail client from expecting POP3 to expecting IMAP?
I was looking for a way to protect my samba server for limiting access to certain domains.Can I use the parameterhosts allow = example.comor something like that or is there another way to do the job for domains
View 4 Replies View RelatedI want to know that by default do we need to configure SMTP and POP3/IMAP sever for sending and receiving mails in Linux server and client machines or we can directly send and receive mails without configuring these mail servers?
View 2 Replies View RelatedI'm installing Lotus Domino on Linux Server. Did anyone know how to reverse proxy for HTTP and POP3/IMAP on linux ? I've problem when try to open webmail from internet. I can't access webmail and POP3 from internet. Seems because connection from internet can't directly to Domino through Firewall. If using apache seems no problem with the webmail, but POP3 still can't access.
View 5 Replies View RelatedHow can I download Mail from Dovecot POP3 Server to new Dovecot POP3 Server of all users and will always run every minute. I've tried fetchmail and getmail but only in one user and need to run fetchmail or getmail to retrieve new emails.
View 6 Replies View RelatedOn our web server I want to have a WebDAV folder and I would like customers to be able to log in with MySQL authentication from our customers database (this I have set up with no problems and it works fine). HOWEVER, I want each customer to have their own subfolder and, having logged in with access to the main WebDAV folder, I want each customer ONLY to be able to access their own subfolder(s). I don't mind them seeing other subfolders exist but obviously I don't want them to have access to other customers subfolders.
OK, of course I could achieve this by adding new WebDAV locations to the httpd.conf for every customer but with a large number of customers httpd.conf will become very large and messy. I have tried applying further restrictions by putting an .httaccess file in each subfolder but that doesn't work - indeed the presence of a .htaccess file oddly prevents users from seeing any other files in the subfolder but has no effect on the access.
I just created new user account, but the new user is able to access all the directories structure (including other's home directories).I'd like to limit the user to access ONLY his home directory (and nothing "above"). How do I do this?
View 1 Replies View RelatedI have a server with a /data/ directory, everything in the /data/ folder has "-rwxrw-rw- 1 root root" permissions.all works fine, multiple users are mounting this over a lan and everyone is able to modify files. However I would like to be able to access the /data/music/ directory from the internet.
Is it possible to configure sshfs to only accept logins from a user restricted to reading the /data/music directory, or would it be possible to tunnel nfs over ssh in such a way that everyone on the lan 192.168.0.xxx has unrestricted access to the data directory, but something coming from outside only has read access to the music directory. Although is one were tunneling nfs over ssh, the nfs mount request would appear to come from the server itself. The router is at 192.168.0.1 and the server is at 192.168.0.3.This Seems very much like what I want to do, however I'm having a bit of trouble getting this to work well with other users mounting with full rights over the lan too.
For long-term migration from courier to dovecot I would like to install courier-pop and dovecot-pop3d simultaneously. Aptitude offers me to install one, by removing the other, only. Can this be done without creating problems for the package manager and future upgrades? And why if not?
The following NEW packages will be installed:
The following actions will resolve these dependencies:
Remove the following packages:
Score is -170
I have recently set up a mail system using Postfix, Dovecot, Spamassasin, ClamAV and atMail - I'm new at this, so proud of myself to have gotten this far. I have required secure authetication for both sending through SMTP and access via POP3 and IMAP. All seems to work properly. I have tested POP3 with KMail and Evolution and everything works great. The only problem is I cannot get Outlook 2007 to authenticate for POP3. I can send through SMTP with secure authentication from Outlook, but no matter what I try I cannot get it to authenticate for POP3 access. Checking SPA in Outlook causes it to repeatedly ask for credentials which it does not accept, while un-checking it causes the client to be immediately rejected by the server.
I have turned on all the various relevant client work-around options in Dovecot and Postfix (that I am aware of) and I have hunted through the web to see what I can find, but no luck.
Besides using the listed client work-arounds in the Dovecot config file, can anyone shed light on what else I might need to do to get Outlook 07 working with POP3?
I've set up Ubuntu 9.04 (desktop) at home in a lab environment (workgroup rather than domain) and have configured Squid. Everything works fine but, when I took it to the next level and made the proxy transparent, my problems began. I can still access sites (having pointed the XP Pro client to the squid box as the DG) and the sites are logged in /var/log/squid/access.log but I am unable to use Outlook to access my SMTP and POP3. I guess that the setup is blocking ports 25 and 110 and I'll need to configure iptables to forward packets destined for these ports directly to the "real" DG, rather than the Squid box. Here's the set up:
A single NIC (eth0) on 172.19.0.250 / 16 (static) ADSL router ("real" DG) on 172.19.0.1 I executed iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 3128 My squid.conf:
Code:
acl all src all
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8
acl localnet src 10.0.0.0/8# RFC1918 possible internal network
acl localnet src 172.16.0.0/12# RFC1918 possible internal network
acl mynet src 172.19.0.0/16
[Code]....
I have 2 ISP where give me IP Public with ISP A (/29) and ISP B (/28). So, I connect this two ISP to unmanaged switch. And from that switch, I take one cable connected to eth0 on the server. (Note : My server have 2 dev ethernet, eth0 and eth1). eth1 will go to the Switch which will go to the LAN.
My Question is : 1. Is this possible to make bandwith control on the gateway server with mode separating International bandwith and local bandwith (my country bandwith)? ie, for my Mail Server I will give the "intl bandwith" only 512 kpbs and for local bandwith with 1Mbps. What a software can I use for this model ?
2. Which model I should to used, with NAT or with Bridging router? That's all for now..
So: On the VPS / Dedicated Server Linux wich 3 users created. How can I limit bandwidth each in a separate? For example first user speed 1 MB. 5 MB second and third 10 MB. Expect some clear answers. Regards, Silviu!
View 5 Replies View RelatedI run Debian 64-bit. I host GameServers on my machine. Yesterday, some corrupt files or error in configurations of one of the game-servers caused my whole system to destabilize. On checking, I saw one of the Gameserver's console giving Net_sendpacket spam errors. I disabled that server and things were fine then. It used up more than 100GB of my bandwidth in just 12 hours.
I deleted the server and copied all the files over again to fix that error. Now I want a prevention to this, if just in case it happens again. I want to limit a sub-user's bandwidth in Linux. Like if I want a user only to use 10GB bandwidth per month + not more than 5MB/second. Is there any way to do it?