Red Hat :: Error - /home1/env/tau3.0/bin/taubatch --project ../Model/TRXHM.ttp --config Target -G

Feb 25, 2011

Recently after reboot, our server is generating Segfault on running one application (Rational Tau 3.0). Below is the error log:/home1/env/tau3.0/bin/taubatch --project ../Model/TRXHM.ttp --config Target -G Telelogic Tau Application Builder make: *** [generate] Segmentation fault (core dumped)

The server was rebooted after some firmware upgrade on Network storage and no changes were made to Server Settings. Interestingly this problem is coming only for a particular revision (Tau 3.0) while other revision is working fine. Application (tau 3.0) is available on a network share (mounted on server) and is working fine on other machines.

[Code]...

View 6 Replies


ADVERTISEMENT

CentOS 5 :: Differences Between Scsi-target-utils & Iscsi-target

May 8, 2009

I want to run ISCSI target on CentOS. Both "scsi-target-utils" and "iscsi-target" can be used.

They seem to have the same function.

Is there any significant difference between them, on performance or stability?

View 4 Replies View Related

Ubuntu Installation :: 10.04 Netbook Remix On Acer Aspire One Zg5 Model - Error: No Such Device

Jul 30, 2010

I just tried to install ubuntu 10.04 to the hard drive of my netbook as i prefer it greatly over the standard linpus one. The operating system booted fine from a bootable usb drive and so i thought if i install it it should run.

so...i got to work installing the system...it completed and asked me to restart, which i did. From there the boot up screen comes on for the pc.....the one where it says press f2 for setup and f12 for boot priority....then goes to a black screen. on this black screen i have a message which says...

"error: no such device: 992fddd7-54c1-45e0-b990-7220c6fa9005 grub rescue>"

View 2 Replies View Related

OpenSUSE :: Error - Make Cannot Have Install Like Target

Aug 18, 2010

I want to install EVMS n machines with openSuse 11.2. The EVMS installation procedure (EVMS: Installation: Installing the EVMS Tools), point 3, says to do: "make install".
I'm in the correct folder, there is the file Makeinstall.ini, but just try to run the command I've an error (make cannot have install like target).

this is my output:

linux-vxth:/usr/src/evms-2.5.5 # ls
.makefile.swo INSTALL.initrd aclocal.m4 engine po
.makefile.swp Makefile.in autoconf include tests
COPYING PLUGIN.IDS config.h.in intl ui

[code]...

I tried too rename "Makefile.in" into "makefile" and "make.rules.in" into "make.rules", but then I have other problems

View 9 Replies View Related

Fedora Installation :: Can't Config The Network Config ( IP Address ), Due To The Error Of Network Manager?

Jan 17, 2010

When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )

View 1 Replies View Related

Programming :: No Rule To Make Target `linux26' Error

Feb 14, 2010

I'm using build root to make an embedded rootfs and compile some code. However I get the following error

make: *** No rule to make target `linux26', needed by `linux-fusion'. Stop.

View 7 Replies View Related

Fedora :: Error In Invoking Target 'agent Nmhs' Of Makefile

Jun 26, 2010

I am having an error during my Oracle 11g R2 installation on Fedora 13 that I couldn't get rid of or fix it, and I just continued the installation by clicking on the continue button to skip this error. The error message on the alert window is:

Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.

and here is the contenets (error part) of the installActions2010-06-24_03-22-15PM.log file

INFO: /usr/bin/ld: /u01/app/oracle/product/carried(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line
/u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation

[code]....

View 2 Replies View Related

Ubuntu :: Error. Exception Has Been Thrown By The Target Of An Invocation"

Mar 30, 2010

Ubuntu 9.10 64-bit. I was importing photos into f-spot. Then my laptop shutdown because it overheated (a different problem). Now f-spot will not open. A dialog pops up and says "F-Spot Encountered a Fatal Error. Exception has been thrown by the target of an invocation." Here are the error details:

Code:
An unhandled exception was thrown: Exception has been thrown by the target of an invocation.at System.Reflection.MonoCMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000]

[Code]...

I've read somewhere that there might be a bug with themes, but I've changed mine back and forth. I don't really think this is a bug as much as something that happened when the computer crashed. I've tried uninstalling f-spot and reinstalling it, I get the same error above. Anybody have any idea on how to get it working again?

View 5 Replies View Related

Ubuntu Installation :: 10.04 SSD Error: Read-only File System: '/target/bin'

Nov 28, 2010

I'm having real issues installing 10.04 to an SSD - I had one SSD fail, and have replaced it with a brand new one, but the 10.04 installer fails at beginning to write files to the disk with this error:

[Errno 30] Read-only file system: '/target/bin'.

Curiously:

* Windows XP will install to this SSD with no issues

* I can install 10.04 to a standard HDD with no errors.

What is happening that is stopping me from installing 10.04 to this drive? I am fairly sure that there is no issue with the SSD (I have two brand new, identical OCZ Vertex II 60gb drives which both encounter this error.)

I have tried partitioning the drive using gparted on another machine, leaving 5mb free at the start of the drive, and having a single partition for /, and a 1gb swap partition. "Round to cylinders" was unchecked. The partitioning was successful, and the drives can be mounted on my other machine, but the 10.04 installer encounters the same error.

View 1 Replies View Related

General :: Getting Error (No Rule To Make Target Version) / Install Ns 2.31?

Mar 22, 2011

I am using Fedora 8. I tried to install ns 2.31. But error came as " No rule to make target "VERSION" needed by gen/version.c".

View 2 Replies View Related

Programming :: Makefile Error - No Rule To Make Target Modules

Mar 30, 2010

Code:
anisha@linux-p0mg:~> uname -r && cat /etc/*release
2.6.25.5-1.1-pae
openSUSE 11.0 (i586)
VERSION = 11.0
My small Makefile:

Code:
obj-m += serialPortISR.o
all:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
clean:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
Errors I receive:

Code:
anisha@linux-p0mg:~/Desktop/serialPortISR_31_10_09> make
make -C /lib/modules/2.6.25.5-1.1-pae/build M=/home/anisha/Desktop/serialPortISR_31_10_09 modules
make[1]: Entering directory '/usr/src/linux-2.6.25.5-1.1-obj/i386/pae'
make[1]: *** No rule to make target `modules'. Stop.
make[1]: Leaving directory '/usr/src/linux-2.6.25.5-1.1-obj/i386/pae'
make: *** [all] Error 2

View 12 Replies View Related

CentOS 5 :: ISCSI Target Directory - Getting Error For Make Command

Feb 1, 2010

I am trying to install iscsi-target on centos 5.4 i386. When I go into the iscsi-target directory and type make I get the following error:
[root@cluster-storage iscsitarget-1.4.19]# make
cc: /lib/modules/2.6.18-164.el5/build/include/linux/version.h: Datei oder Verzeichnis nicht gefunden
cc: keine Eingabedateien
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -le: unary operator expected
/bin/sh: line 0: [: -lt: unary operator expected
make -C usr
make[1]: Entering directory `/opt/iscsitarget-1.4.19/usr' .....
make: *** [kernel] Fehler 2

View 3 Replies View Related

Slackware :: Error - Could Not Load Project Management Plugin KDevQMakeManager

Feb 7, 2010

When trying to load Qmake project in kdevelop it fails and write: "Could not load project management plugin KDevQMakeManager" and then:

"project importing plugin (KDevQMakeManager) does not support the IProjectFileManager interface."

View 5 Replies View Related

Fedora :: Kernel Compile Error : No Rule To Make Target `missing-syscalls'?

Dec 13, 2009

I am trying to compile a kernel in the following directory:/usr/src/kernels/2.6.30.9-102.fc11.x86_64

Note I am not trying to build an rpm but just do a simple make. After configuring with make menuconfig I issue the make command and get the following error:

Code:
[root@compaq 2.6.30.9-102.fc11.x86_64]# make
CHK include/linux/version.h
CHK include/linux/utsrelease.h
SYMLINK include/asm -> include/asm-x86
make[1]: *** No rule to make target `missing-syscalls'. Stop.
make: *** [prepare0] Error 2

how to resolve this error? It seems to be fedora-centric.

View 4 Replies View Related

Ubuntu Installation :: Error Message: The Grub Package Failed To Install Into /target

Oct 2, 2010

I was trying to install ubuntu 9.10 as a dual boot system with windows and I recieved this error message: The Grub package failed to install into /target/. Without the Grub boot loader, the installed system will not boot

This Error comes up after 94% of the install. I also cannot seem to get the side by side install option to work (sometimes this option appears sometimes it does not) I am not sure but I beleive seome of the install files have been placed on the hard drive because I only get the option now to install on the hard drive and totally wipe clean or the emptiest hard drive. So how would I get the possible Ubuntu install off the Hard drive. I have used this CD to Install before it has no scratches therefore should work. Also If I have Win Xp on a Raid 0 will the Ubuntu 9.10 install ?

View 4 Replies View Related

OpenSUSE Network :: Installing Driver Error - No Rule To Make Target `modules' - Stop

Apr 13, 2011

I am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.

I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.

Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.

View 9 Replies View Related

Ubuntu :: Evolution Error Object Class EMFolderTree Doesn't Implement Property 'paste-target-list' From Interface 'ESelectable'

May 24, 2011

When I start evolution from the terminal I get this: (evolution:3265): GLib-GObject-CRITICAL **: Object class EMFolderTree doesn't implement property 'paste-target-list' from interface 'ESelectable' The program still starts though. I am fairly new to Ubuntu.

View 2 Replies View Related

Networking :: No Rule To Make Target `VERSION', Needed By `gen/version.c' / Fix This Error?

Apr 6, 2011

I am trying to install ns2.1b5 on fedora and I am getting the following error:

No rule to make target `VERSION', needed by `gen/version.c'

View 2 Replies View Related

General :: Error "No Target Specified No Makefile Found Stop"

May 7, 2011

i m trying to install glib on my pc but i was always encounter a probelem in make. it says "No Target Specified No Makefile Found Stop"

[code]...

View 14 Replies View Related

Programming :: Makefile - Error When Run The Make Run - No Rule To Make Target - Shell.h

Sep 15, 2010

I want to gave much details as possible. working directory (~/a1/shell) in the shell directory i have Makefile. also in the shell directory i have subdirectory's (obj, src, include)

My current Makefile

Quote:

#What needs to be built to make all files and dependencies

clean:

# End of Makefile

I wanted it so: all .o files are created in the obj subdirectory, and my application, sshell, is created in the shell directory.

I am getting this error when i run the make run: No rule to make target 'shell.h', needed by 'shutil.o'. stop

View 1 Replies View Related

Server :: Configuration Error "No Rule To Make Target 'install'. Stop" In Eclipse

May 18, 2011

I have googlled and get these commands to install extracted .tar.gz file such as ./configure, make and make install, after extraction it becomes a directory called eclipse. But when i giving these commands also i got error like this

[Code].....

View 2 Replies View Related

Fedora Installation :: Installing Madwifi - Getting Following Error "make" Project

May 8, 2010

I am trying to install madwifi on fedora 12. I am getting following error which i "make" the project.

[code]...

View 3 Replies View Related

Debian :: Edit Link Target / Edit The Link Target To Force Ip String At End?

Jun 16, 2011

What I am trying to do is edit the link target to force ip=xxxx.xxx.xxx string at end. I have a software program which access 4 different servers running the software but with different configs. In xp I can copy links and modify as above to correctly force the program to the various servers.

I have read the various how tos on hard vs sym links which I get. Playing around with hardlinks and sysmlinks (the examples I find) does not seem to be what I need. Feel like this is pretty basic stuff but I am a bit stumped.

View 1 Replies View Related

Ubuntu :: ZSh Config Error After Upgrade?

Apr 7, 2010

My .zshrc and .zsh/functions/prompt_fhsm_setup have been the same for a long time. I recently upgraded from Hardy to 9.10 and have started having a problem with my prompt. The error is:prompt_fhsm_setup:32: bad math expression: illegal character: I think the line referenced is:prompt_gfx_hyphen=$'xe2x94x80' but that doesn't seem like a likely cause.Here's the whole file

Code:
# fhsm prompt theme
prompt_fhsm_help () {

[code]....

View 4 Replies View Related

OpenSUSE Install :: X COnfig Error Startup?

Jul 4, 2010

I have a Dell Inspiron 5160 with a volare xp5 video card (only recently supported under linux most linux distros and OpenBSD)Thus far I have done graphics install of KDE based on 11.2 and -- froze end of install and at at the logon / splash screen dueing the reboot could not get to a successful run level 3 text logon. (commandline was vga=x317, I think if n ot it was closeInstalled gnome using text install -- first boot (vga=normal - (default from install)) succeeded at configuring X and started gnome.

I really want KDE so I tried again Text install == hung near the end of the install after printers -- I assume trying to configure XRebooted no command line parameter at all ( no vga=) -- hung at login password screen (blank)Rebooted again with -- vga=normal 3 -- and got a text mode login prompt and successfully logged in -- now I can not find the page that talks about sax2 configuration from run mode 3. This video card needs to be set for VGA I think maybe vesa at 1024X768 16 colors (I succeeded at this under OpenBSD)I believe if necessary I can probably successfully edit the x config file but I would like to try the recommended approach first (as a non-root user as recommended) -- can anyone direct me to that page I cannot find again. It discussed 11.3 x config recovery with a section at the bottom for 11.2 and earlier

View 3 Replies View Related

Ubuntu :: Lucid Apache2 Directory Symlink Error "Symbolic Link Not Allowed Or Link Target Not Accessible"

Jun 2, 2010

There is a symlink from /var/www to a personal directory. FollowSymlink and chmod 755 are all set. It works perfectly until each morning I will get a "Symbolic link not allowed or link target not accessible" error. When I do a "sudo service apache2 restart", the problem will go away.

View 1 Replies View Related

Debian Configuration :: Nagios Server Config Error

Feb 5, 2016

Running natios server in Debian 8? I cannot start nagios3 demon, it got following error:

Error: Check period '24x7' specified for service 'check ssh connection' on host 'testk2' is not defined anywhere!
Error: Notification period '24x7' specified for service 'check ssh connection' on host 'testk2' is not defined anywhere!

But if I commented following statement in generic-service_nagios2.cfg, it works just fine.

# check_period 24x7
# notification_period 24x7

View 2 Replies View Related

Fedora :: NTFS - Config Tool Will Not Open And Gives Error

Sep 10, 2009

When logged in as my standard user in Fedora 11 gnome desktop the installed ntfs-config tool will not open and gives an error which says this; "no authentication program found", and to run that ntfs-config as the root in a terminal. So then the only way to open that tool is to type that in a terminal, and it did open, but how can I fix this ? Can this issue be related to ownership and permissions of it ? Also the num lock does not come on during boot up, is there a easy fix for that too ? This is a recent fresh updated install from the DVD with the ext4 file system. All the ntfs-3g applications are installed as default, so I just added that enable ntfs write support tool with the package manager.

View 2 Replies View Related

Ubuntu :: 9.10 - Warning After Update (Error In Config File)

Mar 18, 2010

I am using ubuntu 9.10 and I updated by ubuntu machine. It updated but at the end it gave me a message that "You have new mail in /var/mail/root". When I checked it via the command "tail /var/mail/root" it showed me this.

tail /var/mail/root
X-Cron-Env: <SHELL=/bin/sh>
X-Cron-Env: <HOME=/root>
X-Cron-Env: <PATH=/usr/bin:/bin>
X-Cron-Env: <LOGNAME=root>
Message-Id: <20100318051502.0D1ABB1C01@Infosec-Lab04>
Date: Thu, 18 Mar 2010 10:15:02 +0500 (PKT)
WARNING: "MaxBytes[leased]" not specified
ERROR: Please fix the error(s) in your config file

View 1 Replies View Related

Ubuntu Installation :: Sdl-config Error When Compiling DOSbox 0.70?

May 8, 2011

Trying to compile DOSbox version 0.70. Apparently this is the only version that can run Privateer flawlessly.Problem is, when I extract the source and try to './configure', I get an error that SDL 1.2 is not installed.

Code:
anthony@anthony-1010:~/Games/DOS/dosbox-0.70$ ./configure
checking build system type... i686-pc-linux-gnu

[code]....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved