Networking :: No Rule To Make Target `VERSION', Needed By `gen/version.c' / Fix This Error?
Apr 6, 2011I am trying to install ns2.1b5 on fedora and I am getting the following error:
No rule to make target `VERSION', needed by `gen/version.c'
I am trying to install ns2.1b5 on fedora and I am getting the following error:
No rule to make target `VERSION', needed by `gen/version.c'
I am using Fedora 8. I tried to install ns 2.31. But error came as " No rule to make target "VERSION" needed by gen/version.c".
View 2 Replies View RelatedMy make file has the following lines:
blah blah
INCLUDES= -I./src
-I./include
-I$(PROJECTPATH)/myproject/libs/liburi/include
LDFLAGS+= -L$(PROJECTPATH)/myproject/libs/liburl/
[code]....
The LDFLAGS specifies the library path, which is specified as -L$(PROJECTPATH)/myproject/libs/liburl/ When I check this directory on my machine I see that the file: liburi.so.1 is indeed there.
When I compile my application, I received following error: ERROR: Source object libxml2.so has EABI version 0, but target turbine has EABI version 4. So I need a libxml2 file with ARM EABI version 4. Can I find one from the internet? or does anyone know how to create one?
View 1 Replies View RelatedI want to gave much details as possible. working directory (~/a1/shell) in the shell directory i have Makefile. also in the shell directory i have subdirectory's (obj, src, include)
My current Makefile
Quote:
#What needs to be built to make all files and dependencies
clean:
# End of Makefile
I wanted it so: all .o files are created in the obj subdirectory, and my application, sshell, is created in the shell directory.
I am getting this error when i run the make run: No rule to make target 'shell.h', needed by 'shutil.o'. stop
I am getting an error as below.
How do I resolve the error: make[2]: *** No rule to make target `', needed by `mpg123'.
How can I resolve this error.
I'm using build root to make an embedded rootfs and compile some code. However I get the following error
make: *** No rule to make target `linux26', needed by `linux-fusion'. Stop.
Code:
anisha@linux-p0mg:~> uname -r && cat /etc/*release
2.6.25.5-1.1-pae
openSUSE 11.0 (i586)
VERSION = 11.0
My small Makefile:
Code:
obj-m += serialPortISR.o
all:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
clean:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
Errors I receive:
Code:
anisha@linux-p0mg:~/Desktop/serialPortISR_31_10_09> make
make -C /lib/modules/2.6.25.5-1.1-pae/build M=/home/anisha/Desktop/serialPortISR_31_10_09 modules
make[1]: Entering directory '/usr/src/linux-2.6.25.5-1.1-obj/i386/pae'
make[1]: *** No rule to make target `modules'. Stop.
make[1]: Leaving directory '/usr/src/linux-2.6.25.5-1.1-obj/i386/pae'
make: *** [all] Error 2
I am trying to compile a kernel in the following directory:/usr/src/kernels/2.6.30.9-102.fc11.x86_64
Note I am not trying to build an rpm but just do a simple make. After configuring with make menuconfig I issue the make command and get the following error:
Code:
[root@compaq 2.6.30.9-102.fc11.x86_64]# make
CHK include/linux/version.h
CHK include/linux/utsrelease.h
SYMLINK include/asm -> include/asm-x86
make[1]: *** No rule to make target `missing-syscalls'. Stop.
make: *** [prepare0] Error 2
how to resolve this error? It seems to be fedora-centric.
I am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.
I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.
Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.
I have googlled and get these commands to install extracted .tar.gz file such as ./configure, make and make install, after extraction it becomes a directory called eclipse. But when i giving these commands also i got error like this
[Code].....
I am following the instructions on Section 8.1.* Device Driver ConceptsHere I was able to proceed till section 8.1.4.After making the hello.c file,the make file and patching the Kconfig as mentioned,I tried to run the $ make ARCH=ARM CROSS_COMPILE=xscale_be- gconfig This gave error as:make: *** No rule to make target `gconfig'. Stop.I am not sure if my kernel is correctly compliled,but I was able to complie and build the kernel for arm before by cloning the kernel and building from the following link without any error. https://omapzoom.org/gf/project/omap...ux+OMAP+Kernel
View 2 Replies View RelatedAfter reading all the forum entries and tutorials I could find, which all make it sound very easy to do, however I type the command 'make' in the folder where I have the "rtl8192su_linux_2.4_2.6.0003.1019.2009.tar.gz " unzipped and get the following output:
make[1]: Entering directory `/lib/modules/2.6.35.6-45.fc14.i686/build'
make[1]: *** No rule to make target `modules'. Stop.
make[1]: Leaving directory `/lib/modules/2.6.35.6-45.fc14.i686/build'
[code]....
I am getting this following error when I do compilation..Please let me know what is missing
ubuntu@ubuntu-desktop:/home/swamy/ttviewer/uvcvideo-2.6.32$ make
make -C /lib/modules/2.6.31-203-gee1fdae/build SUBDIRS=/home/swamy/ttviewer/uvcvideo-2.6.32 modules
make[1]: Entering directory `/usr/src/linux'
[code]....
I have down loaded: slapt-get-0.10.2h-i386-1.tgz I have read the install directions:
Quote:
- Using pkgtools: ----------------
To install:
$ make pkg
$ installpkg ./pkg/slapt-get-${VERSION}-${ARCH}-${RELEASE}.tgz
When I try make pkg, I get:
Code:
root@darkstar:/home/rob# make pkg
make: *** No rule to make target `pkg'. Stop.
I guess that I do not understand the instructions?
i'm trying to install driver for some PCI device but i have problems with it - when i run it it gives me an error
Code: Select allmake: Entering directory `/lib/modules/2.6.32-5-686/build'
make: *** No rule to make target `modules'. Stop.
make: Leaving directory `/lib/modules/2.6.32-5-686/build'
i've tried to find solution in internets but have no success usually they say that problem is that ppl forget to download kernel-headers and kernel-sources or unpack kernel-sources or make symlink usr/src/linux but i've done it all and the result is the same.i think the root of problem is that `/lib/modules/ 2.6.32-5-686/build' folder is empty but there have to be this RULE, so what i have to do to have it there? my system is Debian 6.0.10 Squeeze, Kernel 2.6.32-5-686.
make /usr/bin/make all-am
make: Nothing to be done for `/usr/bin/make'.
make: *** No rule to make target `all-am'. Stop.
whats wrong with this???
I've had qmail running on a server for three years, almost forgot how difficult that installation was. I got away with it because I downloaded Qmail Rocks and followed all their instructions step by step. However, Qmail Rocks is based on qmail 1.03. I just had to install qmail on a new server, so this time I looked around and found netqmail 1.06 and decided to go with it, following the instructions on Life With Qmail. It was a good decision. A read a lot more documentation and now I understand qmail a lot better.
But I can't get past one point: authentication. Consider this test on Qmail Rocks:
Code:
telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 somewhere.anywhere.com ESMTP
ehlo localhost
250-somewhere.anywhere.com
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-STARTTLS
250-PIPELINING
250 8BITMIME
starttls
220 ready for tls
quit
quit
Connection closed by foreign host.
That test works fine on my old server. But qmail behaves differently on my new server:
Code:
# netqmail-1.06> telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 domain.com ESMTP
ehlo localhost
250-domain.com
250-PIPELINING
250 8BITMIME
starttls
502 unimplemented (#5.5.1)
quit
221 domain.com
Connection closed by foreign host.
That same page on Qmail Rocks says that I need to have a certificate, the procedure is described here. The installation procedure given by LWQ does not include that step. Running 'make cert' inside the source directory of netqmail-1.06 does not work:
Code:
# netqmail-1.06> make cert
make: *** No rule to make target `cert'. Stop.
In my vast ignorance, I copied /var/qmail/control/servercert.pem from my old server over to the new one. I also fixed all ownership and permissions. I don't know if I am allowed to do that. But although those are two different boxes, I am in fact installing the same domain in the new box. The new server is going to replace the old one as soon as it's running perfectly. I restarted qmail and... authentication still does not work.
I am compiling libmp3lame from svn and I got following error No rule to make target `basic.html', needed by `all-am'. Stop. which package am I missing.....??
View 9 Replies View RelatedI'm attempting to build cloog-ppl-0.15.10 but even the configure script tells that everything look good, "make" complains saying "No rule to make target `m4/libtool.m4`, ...". I'm running Scientific Linux 5.5 on a x86_64 machine.
View 1 Replies View RelatedWhat is default socket name and version in redhat linux with kernel version 2.4-20-8.
View 1 Replies View RelatedAFAIK, in addition to implementing the standard C library, glibc provides wrappers for system calls, threading support, and basic application facilities. So because of that, glibc that will be used on my target system should be built based on the kernel version running on my target, right?
Based on the above, I am trying to build a glibc version for my target machine's kernel. However, I don't know to to build a glibc library for a target system and also where on the target's filesystem should be put? In which location Linux will start looking for the libraries required for a program to run (should I create an /etc/ld.so.conf file)?
Does anyone know the wine version needed to run the online installer of WoW? I get stuck on the End User License Agreement because I cannot click Agree. Oh and if you know, how do I go about getting that version?
View 2 Replies View Relatedi am having following error: /usr/src/dahdi-tools-2.4.1/ppp :this is my current path when i use make here i get below error pppd version not found (in patchlevel.h). Install ppp source/headers and/or ./configure --with-ppp=PATH. exit 1 make: *** [dahdi.so] Error 1
View 1 Replies View RelatedI get the following error message trying to install dazuko on xubuntu 10.04: "headers for target kernel version could not be found" But when I run sudo apt-get install linux-headers-$(uname -r), I get the message that I already installed the headers. My current kernel is 2.6.34-020634-generic
How can I install dazuko withouth having this problem??
I'm trying to install wine. First I'm not a hot shot Linux guy. I tried to follow the download instructions for wine.
1. I downloaded wine_gecko-1.2.0-x86.msi to /usr/share/wine/gecko and downloaded wine-1.3.17-1.1.i586.rpm to /usr/share/wine
When I try to install I get message that wine_gecko version>= to 1.1 is needed.
I have a problem where I'm using Ubuntu linux to mount a Windows Vista machine's USB drive and access it on the web using Apache. I did have the USB drive plugged into the Linux machine directly and that was working via the web. FollowSymLinks is on in httpd.conf
[Code]....
The mount works and I can see the files (see above) from my regular linux user account. If I make a test file in /mnt and soft link to that, I can see it on the web. So it's just the mount to the vista machine that seems to be a problem. It's supposed to be a simple read-only mount and the apache login should (I think) be able to see the same generic root access permissions.
log from apache: [Mon Apr 26 20:39:42 2010] [error] [client 99.99.99.99] Symbolic link not allowed or link target not accessible: /home/user1/pub_html/Music, referer: https://xx.xx.xx/~user1/music.html
The credentials have a login and password that matches a special read-only account on Vista. I can see the files on the system from Linux, but not via the web. As mentioned above, a different link to the same /mnt area works fine via the web. I've tried several different mount options with no success.
I want to install EVMS n machines with openSuse 11.2. The EVMS installation procedure (EVMS: Installation: Installing the EVMS Tools), point 3, says to do: "make install".
I'm in the correct folder, there is the file Makeinstall.ini, but just try to run the command I've an error (make cannot have install like target).
this is my output:
linux-vxth:/usr/src/evms-2.5.5 # ls
.makefile.swo INSTALL.initrd aclocal.m4 engine po
.makefile.swp Makefile.in autoconf include tests
COPYING PLUGIN.IDS config.h.in intl ui
[code]...
I tried too rename "Makefile.in" into "makefile" and "make.rules.in" into "make.rules", but then I have other problems
How do i check for updates to the current version of rkhunter and if possible upgrade to a new version?
View 2 Replies View RelatedI have a doubt, may sound funny but wanna know whether it is possible to share DVD drive in windows [version 7] and use it in Linux system [version fedora 12]?
View 4 Replies View Related