I am using RHEL 5. I have enabled rpmfusion, epel and rpmforge yum repositories and installed Audacious and dependecies. But I could not find any mp3 playback plugins. Installed Audacious plays ogg format but doesnt play mp3. How can i make Audacious play mp3 format ?
View 8 RepliesI have installed Audacious and audacious-plugins-freeworld-mp3 on F15. MP3 support now works (i.e.: mp3 files are being played) but audacious does not show me the scroll bar/widget with which I can move within a track. The horizontal line of said widget is being displayed but it's not showing the button which marks the offset within a track and clicking on the horizontal line has no effect.
View 2 Replies View Relatedi am using FC11. I have installed GD and it is showing in RPM list. Copied libgd.so in php modules and made an entry in php.ini. php version is :
php -version
PHP Warning: PHP Startup: Invalid library (maybe not a PHP library) 'libgd.so' in Unknown on line 0
PHP 5.2.9 (cli) (built: Apr 15 2009 09:30:33)
Copyright (c) 1997-2009 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies
[code]....
I don't see floppy drive in Nautilus. How to enable FDD support in Fedora?
View 5 Replies View RelatedI followed this tutorial [URL] to enable my TRIM support and now my fstab looks like this:
Quote:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[Code].....
but when I follow the second half of the tutorial http://lightrush.ndoytchev.com/rando...bledandworking to check and make sure it's working I don't get all zeros like I'm supposed. I tried waiting a while like I saw in another tutorial as well and check it again.. Still random numbers and no zeros.
Configure desktop (Desktop - System Settings) --> Desktop
Message indicates:
Compositing is not supported on your system.
Required X extensions (XComposite and XDamage) are not available.
I can't find XComposite or XDamage as a package to install with Software Management. code...
I need to use my TV as a monitor via DVI.
Using Meerkat 64. Here's some specs:
Code:
Because the Physical ID is 2.1, I'm fairly certain this is the DVI port. Do I need a driver for this to work?
first, sorry for my bad english, I am german I have a problem enabling IOMMU on my MSI 970A-G45 mainboard. I need the IOMMU support for PCI passthrough in KVM ( I need my DVB pci cards in the virtual machine).
I have installed Ubuntu server 11.04 and enabled IOMMU in bios. The first strange thing is, that when iommu is enabled in the bios i cant access network or USB devices in ubuntu. Only when its disabled in bios.
Well, i tried the tutorial from here: http://www.linux-kvm.org/page/How_to...th_VT-d_in_KVM and compiled a new kernel with "Support for DMA Remapping Devices", "Enable DMA Remapping Devices" and "PCI Stub driver" enabled and installed it (based on description in wiki)
[Code]...
How to install or enable freetype support in php version 5.2.2. I already installed gd support in php. I using RHEL4. I not able reinstall or recompile in my server.
View 1 Replies View RelatedHow to enable multiple language support in centos?
understand that we need to install scim (smart common input method)
but if I install and choose only one language, what should I do after installation
from http://www.centos.org/docs/4/4.5/rhel-ig-x8664-multi-en-4/s1-langsupport.html
I guess right now after i install scim, I'll still not able to view other language (Asian Language) web sites
i'm using pidgin 2.7.1
how do i enable video support for pidgin?, or is it on by default?? because when i click a chat room from yahoo's list of rooms(that say people have web-cams)i don't see any options to view any of the webcams.
trying to understand the two underlined sentences below I got to ask Step by step. I created a new group called usb. I inserted a usb printer and scanner. I tried to find the file usbfs and there is where get stuck already. I only can find a folder with that name. The sentence (3 -) makes almost no sense to me.
a) modify file /etc/fstab clear open terminal, go to etc, su gedit fstab
b) inserting a line yes I understand that!
c) the right path and the number corresponding the "usb" group :
none /sys/bus/usb/drivers usbfs devgid=503,devmode=664 0 0
2 - locate file usbfs: in my case is /sys/bus/usb/drivers (I suggest to find the file with a usb device inserted;
3 - modify file /etc/fstab inserting a line containing the right path and the number corresponding the "usb" group :
none /sys/bus/usb/drivers usbfs devgid=503,devmode=664 0 0
I think I have finally arrived at an insolvable equation:
Chromium v.7 + Ubuntu 10.04 + Sun Java 6 + Webcam + Facebook + Flash 10 = non-functional
All of those items listed above are potential points of failure in this situation, and any help narrowing them down would be fantastic. I am simply trying to enable webcame support directly through Facebooks website.
Forum searches and the usual googling turn up few posts related to this specific equation. Two of the major suggestions include:
1) Installing the Sun (I refuse to say oracle sob)-provided Java implementation instead of the OpenJDK normally installed in Ubuntu. And yes, after installing it, I did update all my default supports to use the sun commands over the openjdk.
2) Somehow enabling Facebook as a permitted site to access my webcam using Flash settings.
I have not been able to explore option 2 because I cannot find a way to adjust the Flash settings in chromium 7.
I have tried many ways to enable vdpau support in my machine but for no avail. A member here helped me very much but I couldn't manage to succeed. My system has Ubuntu 9.10 64-bit, Nvidia 8500GT 512mb, Intel Core 2 duo. I have installed Nvidia driver version 195 currently available from their site. I tried compiling mplayer with vdpau support from various tutorials thread here around in Ubuntu forums.
Is there anyone in this forum with Ubuntu 9.10 64 bit with the same other system requirements as mine who have successfully managed to make the VDPAU work?
I have ubuntu jaunty 9.04 installed in my system(thats my only OS.. no dual boot). When I tried to install hplip to enable hp printer driver, I understood that 9.04 is obsolete and no more support for it. I want to upgrade now. Update manager shows '10.04' for uogradation but it seems I cannot jump from 9.04 to 10.04 without getting into 9.10.
View 2 Replies View RelatedI had the elrepo kmod-r8168 driver running smooth for a while on my development box.
Yesterday, I did a clean install on it and when I tried to install the latest kmod-r8168 rpm, it failed to enable the networking support:
# yum --enablerepo=elrepo install kmod-r8168
The install performed all proper steps to disable the 8169 driver, I double checked to be sure.This is not a connectivity issue. If I remove the kmod-r8168 rpm, reboot the server and run the ifconfig eth0 up to activate the interface, everything works as expected. I use the latest kernel (2.6.18-194.26.1.el5 x86_64).
First, I performed a clean install, activated the eth0 and did a yum update, then installed the kmod-r8168 with yum. Then, I reinstalled the OS again, activated the eth0 and installed the kmod-r8168 on a 5.5 CD based kernel, same fail results. The only hiccup is: every time I start the box, I have to activate the eth0 interface (with default CentOS 8169 driver):
# ifconfig eth0 192.168.1.3
# ping -c 3 192.168.1.1 (no packets lost)
# ifconfig eth0 up
Once I do this, I have network connectivity.
I see "Virtual Directory Support" is disabled in phpinfo.php, how can I enable it ? I didnt find any option in php.ini related to Virtual Directory Support.
View 1 Replies View RelatedI recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedI'm using Crunchbang Statler which is based on stable Debian Squeeze and I was wondering if anyone knows when audacious 2.4.2 will be available in the repository?
View 3 Replies View RelatedOk so I have some music that I have burned from cds, within windows, I have them in a wma format. The video player, handles those songs just fine. However I really enjoy using the Audacious player. Whenever I try to run in Audacious,Is there a way to update the decoders for audacious specifically, either through the repo or CLI?
View 14 Replies View RelatedI am using F15 beta 1.
View 4 Replies View RelatedStatus update:
Latest builds including a few more fixes will hit updates-testing with the next push: [URL]
This time, karma automatism is enabled, so the update will hit the stable updates repo after either +3 votes or after 7 days. Regardless of whether the -freeworld packages are available. Those are being worked on as well, but since RPM Fusion doesn't build their packages against Test Updates, it seems they don't spend the extra effort on pulling the Test Updates into their buildroot and instead wait till those get marked stable.
OpenSUSE 11.3 KDE 4.4.4 64bit. Installed Audacious thru Yast2 using the Packman repository [ver 2.4.3-1.pm.1.1-x86_64]. When I look in the start menu it shows up under Multimedia > Audio Player > Adacious. When I try to start Audacious, by either:
1] clicking on the icon in the start menu
2] starting it from terminal
3] typing it from run command
I can see the bouncing 'a' for Audacious. It bounces for a few seconds and then disappears and then nothing more happens. I am using Audacious on my 32 bit system [running openSUSE 11.3 KDE 4.4.4 ] and it works just fine.
I used to be able to play MPC (musepack) in Audacious but can't any more. I have the Audacious 2.1.1 package and libmpcdec3 installed, running Ubuntu 9.10
View 1 Replies View RelatedI am trying to install audacious from a tar.gz. Here is the ./configure output
Code:
elliotn@elliotn-desktop:~/Desktop/audacious-2.3$ ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no .....
Configuration:
Install path: /usr/local
Use one plugin dir:
Allow user plugin dir: yes
Additional debugging output: no
Automatic character code detection: yes
D-Bus support: no
Session management (eggsm) yes
XSPF playlists no
SSE2: yes
AltiVec: no
WARNING! DBUS support is disabled. This means that various features the user might expect (such as remotely adding files to session via commandline) will not work! If I type make it dies make but I see nothing under sounds if I type make here is the output:
Code:
elliotn@elliotn-desktop:~/Desktop/audacious-2.3$ make
Entering directory src.
Entering directory libeggsmclient.
Successfully generated dependencies.
Leaving directory libeggsmclient.
Entering directory libaudcore .....
Whenever I try to click any of the places under the "Places"-menu in the panel under Gnome audacious gets started instead. How strange! Only way to stop it is to uninstall audacious. This seems very strange, it started today and I have no idea of why it started. Ubuntu 10.04. Do you need any more information? I am pretty new to the Gnome environment, I have always been running Fluxbox before.
View 4 Replies View RelatedThe audacious in the ubuntu software center is an old version and I really hate it.
View 4 Replies View RelatedI know we can change the skin of a conventional audacious player but is there a way we can do it with audacious GTKui?
View 4 Replies View RelatedWhenever I try to add or update metadata from a MP3 file, Audacious gives the message "Metadata updating failed".I use Ubuntu (9.10) and installed Audacious (2.1.0) from the Ubuntu Software Center.Does anybody know what causes this or how I can find out what the problem is...
View 2 Replies View RelatedI've recently installed Audacious and I can't seem to make it play ogg files. My OS is Debian Lenny 64-bit. Thank You guys, I'll see if I can get it to work or find any errors.
View 5 Replies View Related