How to install or enable freetype support in php version 5.2.2. I already installed gd support in php. I using RHEL4. I not able reinstall or recompile in my server.
View 1 RepliesI think I have finally arrived at an insolvable equation:
Chromium v.7 + Ubuntu 10.04 + Sun Java 6 + Webcam + Facebook + Flash 10 = non-functional
All of those items listed above are potential points of failure in this situation, and any help narrowing them down would be fantastic. I am simply trying to enable webcame support directly through Facebooks website.
Forum searches and the usual googling turn up few posts related to this specific equation. Two of the major suggestions include:
1) Installing the Sun (I refuse to say oracle sob)-provided Java implementation instead of the OpenJDK normally installed in Ubuntu. And yes, after installing it, I did update all my default supports to use the sun commands over the openjdk.
2) Somehow enabling Facebook as a permitted site to access my webcam using Flash settings.
I have not been able to explore option 2 because I cannot find a way to adjust the Flash settings in chromium 7.
When I try to install my propriety graphics driver. I don't know what it means. Here are the steps I took and what resulted:
killerzen@Decode666:~$ cd ~/Desktop
killerzen@Decode666:~/Desktop$ chmod +x ati-driver-installer-9.2-x86.x86_64.run
killerzen@Decode666:~/Desktop$ ./ati-driver-installer-9.2-x86.x86_64.run
Created directory fglrx-install.pHiKQh
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.582
ATI Technologies Linux Driver Installer/Packager
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.32-22-generic; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.pHiKQh
I'm currently an user of OpenSuse, newer version of Suse don't support some of the hardware that I use and previous version of Suse will cease to have support in a few months. So I'm considering other versions of Linux and Ubuntu comes to mind. So I like to know if Ubuntu (Desktop 32 bits) supports this devices:
NVIDIA Quadro2 Pro (including 3d support)
Wacom Intuos 2 SERIAL tablet
Epson ActionScanner II PARALLEL
which vanilla kernel version provide support for QM57 chipset?
View 1 Replies View RelatedI see "Virtual Directory Support" is disabled in phpinfo.php, how can I enable it ? I didnt find any option in php.ini related to Virtual Directory Support.
View 1 Replies View Relatedi am using FC11. I have installed GD and it is showing in RPM list. Copied libgd.so in php modules and made an entry in php.ini. php version is :
php -version
PHP Warning: PHP Startup: Invalid library (maybe not a PHP library) 'libgd.so' in Unknown on line 0
PHP 5.2.9 (cli) (built: Apr 15 2009 09:30:33)
Copyright (c) 1997-2009 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies
[code]....
I am using RHEL 5. I have enabled rpmfusion, epel and rpmforge yum repositories and installed Audacious and dependecies. But I could not find any mp3 playback plugins. Installed Audacious plays ogg format but doesnt play mp3. How can i make Audacious play mp3 format ?
View 8 Replies View RelatedI don't see floppy drive in Nautilus. How to enable FDD support in Fedora?
View 5 Replies View RelatedI followed this tutorial [URL] to enable my TRIM support and now my fstab looks like this:
Quote:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[Code].....
but when I follow the second half of the tutorial http://lightrush.ndoytchev.com/rando...bledandworking to check and make sure it's working I don't get all zeros like I'm supposed. I tried waiting a while like I saw in another tutorial as well and check it again.. Still random numbers and no zeros.
Configure desktop (Desktop - System Settings) --> Desktop
Message indicates:
Compositing is not supported on your system.
Required X extensions (XComposite and XDamage) are not available.
I can't find XComposite or XDamage as a package to install with Software Management. code...
I need to use my TV as a monitor via DVI.
Using Meerkat 64. Here's some specs:
Code:
Because the Physical ID is 2.1, I'm fairly certain this is the DVI port. Do I need a driver for this to work?
first, sorry for my bad english, I am german I have a problem enabling IOMMU on my MSI 970A-G45 mainboard. I need the IOMMU support for PCI passthrough in KVM ( I need my DVB pci cards in the virtual machine).
I have installed Ubuntu server 11.04 and enabled IOMMU in bios. The first strange thing is, that when iommu is enabled in the bios i cant access network or USB devices in ubuntu. Only when its disabled in bios.
Well, i tried the tutorial from here: http://www.linux-kvm.org/page/How_to...th_VT-d_in_KVM and compiled a new kernel with "Support for DMA Remapping Devices", "Enable DMA Remapping Devices" and "PCI Stub driver" enabled and installed it (based on description in wiki)
[Code]...
How to enable multiple language support in centos?
understand that we need to install scim (smart common input method)
but if I install and choose only one language, what should I do after installation
from http://www.centos.org/docs/4/4.5/rhel-ig-x8664-multi-en-4/s1-langsupport.html
I guess right now after i install scim, I'll still not able to view other language (Asian Language) web sites
i'm using pidgin 2.7.1
how do i enable video support for pidgin?, or is it on by default?? because when i click a chat room from yahoo's list of rooms(that say people have web-cams)i don't see any options to view any of the webcams.
trying to understand the two underlined sentences below I got to ask Step by step. I created a new group called usb. I inserted a usb printer and scanner. I tried to find the file usbfs and there is where get stuck already. I only can find a folder with that name. The sentence (3 -) makes almost no sense to me.
a) modify file /etc/fstab clear open terminal, go to etc, su gedit fstab
b) inserting a line yes I understand that!
c) the right path and the number corresponding the "usb" group :
none /sys/bus/usb/drivers usbfs devgid=503,devmode=664 0 0
2 - locate file usbfs: in my case is /sys/bus/usb/drivers (I suggest to find the file with a usb device inserted;
3 - modify file /etc/fstab inserting a line containing the right path and the number corresponding the "usb" group :
none /sys/bus/usb/drivers usbfs devgid=503,devmode=664 0 0
I have tried many ways to enable vdpau support in my machine but for no avail. A member here helped me very much but I couldn't manage to succeed. My system has Ubuntu 9.10 64-bit, Nvidia 8500GT 512mb, Intel Core 2 duo. I have installed Nvidia driver version 195 currently available from their site. I tried compiling mplayer with vdpau support from various tutorials thread here around in Ubuntu forums.
Is there anyone in this forum with Ubuntu 9.10 64 bit with the same other system requirements as mine who have successfully managed to make the VDPAU work?
I love openSUSE, but I hate its default font rendering. On openSUSE 11.3, I am obtaining good results with the SubpixelHinting - openSUSE Community Wiki together with [url]. However, the previous repo doesn't have packages for 11.4. I know that there are some personal packages in the build service, but soon after the 11.3 release they pulled these personal packages because they might violate a patent. So where is a reliable, easy source for installing the best libraries for smooth fonts with subpixel hinting?
View 9 Replies View Relatedwhen i try to compile LMMS, I get this error:
CMake Error: Freetype_DIR is not set. It must be set to the directory containing FreetypeConfig.cmake in order to use Freetype.
there is no file on my machine named that or any lowercase/uppercase combinations thereof.
here is the full spit out:
[jayjay@localhost lmms-0.4.5]$ cd build
[jayjay@localhost build]$ make
PROCESSOR: Intel(R) Pentium(R) 4 CPU 3.00GHz
Machine: i586-mandriva-linux-gnu
-- Target host is 32 bit
-- Found Qt-Version 4.3.3
code....
i looked at version 2010 RPM file lists, still no FreeTypeConfig.cmake.
I even built cmake 2.8 from cmake's SF page, it has FindFreetype.cmake, but not FreeTypeConfig.cmake.
What can I do?
what version support sun sparc tell version or link load fedora support sun sparc
View 4 Replies View RelatedI just upgraded from Lucid to Maverick and I absolutely cannot get the proprietary fglrx driver to install. I've downloaded the binaries from ATI and they fail to install with a message that says:
Code:
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.35-22-generic:; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.Dtv3Sn
I tried installing the drivers from the System>Administration>Additional Drivers and it fails with
SystemError: installArchives() failed Based on what little I could find I guess the newest version of Xorg broke the ATI drivers. Is this true and is there absolutely no way to use the proprietary drivers? I'm a World of Warcraft nerd and the fglrx drivers are the only ones that work for me
I am trying to implement a chroot directory for a group of sftp users who all manage a shared directory. The relevant portion of my sshd_config file is below:
[Code].....
this is the latest yum reports as available. according to the error is would seem both 'Match' and 'ForceCommand' statements are not supported in this version of ssh? Do I have any options aside from installing from tarball from openssh.org? If I do that would that mean I could not use yum to maintain ssh on my system anymore? Not sure what to do, I have to chroot this group of users, I can't just chroot at the global config level because I need to still be able to ssh as my admin user to this box to administer it. I need the chroot'ing only for sftp purposes.
We will be installing some ibm software on our 2 Quad Core Intel server and ibm lists the OS requirements as RHEL 5 Advanced Platform Update 3 but we have the licenses for RHEL 5.3 (non AP). The question is, since we are not planning for any type of virtualisation and will have a single instance of OS installation, is there any reason (OS level) for the products being not supported on base version?
(I am also checking with IBM but would also appreciate some input from Red Hat as well) In other words, are there any hard dependencies or differences between AP and base versions other than virtualisation support?I just read that base version support only up to 2 CPUs. Does this include the Cores or it is just physical CPU sockets number (i.e will 2 CPUs with 4 core each still be supported).
I am installing Ubuntu 9.0.2 begineer version and when i connect access this server remotely it is not having SSH enabled. Does the ubuntu 10.0 server is having SSH enabled?
View 1 Replies View RelatedI'm a compiling noob, but one who can follow well-written directions. I was led to believe that I needed to compile an updated version of freetype to satisfy some build dependencies in Wine, which I also needed to compile to be able to use a custom patch. So now my fonts look awful. I read the directions that came with the freetype source code, and one thing I didn't configure properly was the auto-hinter, which I believe to be the problem (although that's just an educated guess), since the documentation lacked the necessary docs.
how do I go back to stonking great fonts? I'd rather keep the new version of freetype, if someone could tell me how to properly configure it to display fonts correctly.
I have the HD4850 and, I wanted to know if it is possible to use the CLI to see which version of OpenGL is the latest version I can use according to my driver. If it's not possible via the CLI then, what's the next best way? (I can't find a website for the radeon driver listing the latest OpenGL support per supported card).
View 6 Replies View RelatedIn FC11 i686, I notice that after yum install xsane xsane -v reports a version of xsane that is compiled without Gimp support. Is there a special name for the xsane package that does have Gimp support?
View 2 Replies View RelatedI have ubuntu jaunty 9.04 installed in my system(thats my only OS.. no dual boot). When I tried to install hplip to enable hp printer driver, I understood that 9.04 is obsolete and no more support for it. I want to upgrade now. Update manager shows '10.04' for uogradation but it seems I cannot jump from 9.04 to 10.04 without getting into 9.10.
View 2 Replies View Relatedwill going from 10.04 desktop to 10.10 netbook mean i have to reinstall everything? also, does the netbook version support mounting of networked drives?
View 3 Replies View Relatedi upgraded my ubuntu 9.10(karmic) to ubuntu 10.04 (lucid) by executing the commands " apt-get update apt-get dist-upgrade" one at a time in terminal after finishing upgrade ,i restarted my system, after restarting i can't access GUI (interface) in UPGRADED version ,it prompts me to terminal interface. how to enable proprietary drivers.., about enabling proprietary drivers! and also i used startx command it prompts me to gui but i can't access my keyboard and mouse or any other input devices.
View 5 Replies View Related