Red Hat :: How To Start X Server
Jan 22, 2011How to start X server in Red Hat Linux.
When i booted my linux server the gui is not appearing, instead it asks to login in a non-gui textual mode.
How to start X server in Red Hat Linux.
When i booted my linux server the gui is not appearing, instead it asks to login in a non-gui textual mode.
Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
[code]...
but still no dice.
I have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
I use FC8 and i want some services like HTTPD and NAMED to start at the start of the system , how to create a script to do that .
View 9 Replies View RelatedFresh install, followed the directions,
# ./configure --with-mysql --with-openssl --with-openssl-libs=/usr/lib (MySQL 5.5.12 & OpenSSL 1.0.0)
Everything seemed to go well enough. Stock lighttpd.conf. However, it won't start on boot. Not even manually via:
# /etc/init.d/lighttpd start
or
# /etc/init.d/lighttpd -f /etc/lighttpd/lighttpd.conf (came across that while scouring Google).
No messages, no logs, nothing. ?
I installed IBSng in ubuntu-server .but i can not start this server :Code:[root@myserver]# /etc/init.d/IBSng start.: 8: Can't open /etc/rc.d/init.d/functions"functions" file is in RPM base system . and ubuntu have not this file
View 2 Replies View Relatedwhen i start qmail seervice it gives error#/etc/init.d/qmail startStarting qmail-toaster:
svscansupervise: fatal: unable to acquire pop3/supervise/lock: temporary failure
supervise: fatal: unable to acquire log/supervise/lock: temporary failure
supervise: fatal: unable to acquire log/supervise/lock: temporary failure
supervise: fatal: unable to acquire pop3-ssl/supervise/lock: temporary failure
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
I am trying to do a https access with virtual hosting with apache.
But when I install mod_ssl rpm httpd server does not start again
I am stumped
httpd -t shows syntax is OK
I am running CentOS 5.4 and Postfix. So when I start Postfix server than immediately maillog is starting to grow. And the first lines that I see in it are:
[Code]...
Server is already in several blacklists and I desperately need to do something.
I have one server with Jboss and Tomcat installed, I have to start these servers manually everytime I do reboot the server.How I could do to start Jboss and Tomcat automatically, when I do reboot the server?
View 1 Replies View RelatedI'm trying to move a mysql 5.1.50-community InnoDB database from one location to another.When starting the service I get:Starting MySQL.Manager of pid-file quit without updating file [FAILED]I've searched for a way to do this but I can only find people who describe what I've just done.
View 6 Replies View Relatedi've made a big update of almost 300Mb.I'had a working DNS server.Now, when i boot the box, named works and it resolves all the clients.If i make any change (enter a new client for example) and of course i restart named (service named restart), named stop but does not start again !!!In order to get a working named, i 'm obliged to reboot the box?
View 6 Replies View Relatedhow to start and stop jboss server i had done but it is saying permission denied.
View 2 Replies View RelatedI'm using Ubuntu 10.04 LTS - the Lucid Lynx.
I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".
But its giving error message at the end of installation when its trying to start the server.
The error message is as follows.
When i tried to start the server after the installation, i get this error message
Note : The file "/etc/mysql/my.cnf" is empty.
when I reboot the server with centos 5.5 the SMB deamon doesn't start?
View 2 Replies View RelatedHow do I start a new X server?I boot in runlevel 5 so my 'main' console (VT1) is the GUI. So I switch to the second virtual console (Ctrl+Alt+F2) and login as same user. I try starting a new xserver (startx), but I get an error. Then I tried to google for an answer on found this on the Ubuntu forums: ok...i'm jumping in on this one and hopefully i can help. bring up another ttyl do this: ctrl + alt + f2 it'll bring you to a login screen. login as any user you have on the box (yes you can log in as yourself more than once unless you tell it not to). then start an X window in that terminal on a new server like this: xinit -- :1 vt12.
View 14 Replies View Relatedi use webmin to manage the networking tools and services and i am trying to setup an ssh server and webmin keeps telling me that the server isn't started i updated ssh by installing the source tarball from openssh.org and built and installed it. the installation was a success but i can't start the service and when i run the command
[Code]....
why won't the ssh server start i gave it a port and address whats missing do i have to downgrade the version number?
How to get GUI while ssh to a server? This is what I have so far.
Code:
yum groupinstall "X Window System" "GNOME Desktop Environment" on server
How to start the gui?
I have Apache running fine on a webserver but now just tried to get SSL running also. I made a copy of default-ssl and changed the SSLCertificateKeyFile record to match the certificate I had. I enabled the site through a2enmod and restarted apache but a telnet to 443 tells me that SSL is not running. Also apache2ctl -S is not listing the record. There is no indication in the errors logs to give me a clue.
View 3 Replies View RelatedI had been using Redhat 7.2 (2.4.7-10) on a desktop PC with an i810 chipset till recently and never encountered any problem with the X-server. A few days back, I shifted to an i845 chipset. The X-server worked well at installation time, but does not start when I boot off the hard-disk. I configured my X-server to use the i810 driver at installation time. what do I have to do to get the X-server started ? I am most unwilling to move to some other distribution of Linux. Redhat 7.2 is the only one I like. Interestingly, using the i810 driver works very well with FreeBSD 6.2 on the same i845 chipset.
View 2 Replies View RelatedI'm running CentOS 5.4. I rebooted the machine for the first time in at least a month or so. I reboot into runlevel 3 (no X11). Things seem fine. But when I login and try to start X with "startx", the screen goes blank. X doesn't appear to start. In fact, the only thing I can do is reboot the machine and start over. This is really annoying.
View 1 Replies View RelatedI've installed mysql server and starting it "service mysqld start"
I get:
Here is what get in "mysql.log"
I have Suse linux 7.2 Prof' Yes I know its old but I have an old machine. I start installing with YAST in graphics mode but the title message is displayed.
View 6 Replies View RelatedI run a headless Ubuntu file server which I access remotely via ssh or using VNC. After reboot, short of moving monitors around, is there anyway to start the GUI and continue using VNC as I normally would? I still rely on the GUI to get done what I need for the most part.
View 9 Replies View RelatedCode:
mulo@mulo-System-Name:~$ sudo vncserver
You will require a password to access your desktops.
Password:
Verify:
New 'mulo-System-Name:1 (root)' desktop is mulo-System-Name:1
Creating default startup script /home/mulo/.vnc/xstartup
Starting applications specified in /home/mulo/.vnc/xstartup
Log file is /home/mulo/.vnc/mulo-System-Name:1.log
I just need to do this?
i tried doing this but on windows with another machine if i try to connect at this ip it says me "connection refused"
When I restart the NFS server I end up with this
Code:
/etc/init.d/nfs-kernel-server restart
* Stopping NFS kernel daemon start-stop-daemon: warning: failed to kill 1609: Operation not permitted
start-stop-daemon: warning: failed to kill 1604: Operation not permitted
[Code]...
how to properly start a new x-server(duh!), but i have few a couple questions to be more direct. The main purpose is to play games and such, also other utilities such as connect through ssh to another pc.
Now to the questions: -Does the use of a new x-server really improves game perfomance? In my tries i couldn't notice, but the obvious advantage of return to regular desktop without quiting the game seems not that great when switching between servers lagged a lot( in the tries).
[Code]...
I would like to know how I can make GDM to start the x server with another display number (and on different vt).
The reason for this is that I have a chroot environment and I believe I have installed the necessary packages but when I do $ /etc/init.d/gdm start it seems to start but no new x server is running on any of the vt.