Red Hat :: 7.2 X-server Does Not Start After Installation?
Jan 18, 2009
I had been using Redhat 7.2 (2.4.7-10) on a desktop PC with an i810 chipset till recently and never encountered any problem with the X-server. A few days back, I shifted to an i845 chipset. The X-server worked well at installation time, but does not start when I boot off the hard-disk. I configured my X-server to use the i810 driver at installation time. what do I have to do to get the X-server started ? I am most unwilling to move to some other distribution of Linux. Redhat 7.2 is the only one I like. Interestingly, using the i810 driver works very well with FreeBSD 6.2 on the same i845 chipset.
View 2 Replies
ADVERTISEMENT
Mar 3, 2011
I'm using Ubuntu 10.04 LTS - the Lucid Lynx.
I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".
But its giving error message at the end of installation when its trying to start the server.
The error message is as follows.
When i tried to start the server after the installation, i get this error message
Note : The file "/etc/mysql/my.cnf" is empty.
View 1 Replies
View Related
Jun 14, 2011
Recently i upgraded my laptop from ubuntu 9.10 to 10.04 but alas! after the upgrade i don't get anything, just the 10.04 boot up screen and my cursor after some time. when i run it in recovery mode and tried to startx from there , it gave me a message " no protocol defined " now i can only access my system in failsafe x mod. code...
View 2 Replies
View Related
Feb 20, 2009
I have a problem with running Apache web server. I think my problem is either I can not get httpd to load automatically or it's being blocked from external unless I'm logged in, don't know which. Or, I'm completely off base. Either way, being logged in solves the problem. Now I just need to fix it. This is a brand new server running latest apache and fedora 10 (all fully patched). Loaded from source to all default (non RPM directories - apache is /usr/local/apache2/... )
I modified the existing /etc/init.d/httpd script and had it point to the /usr/local/apache2 areas.I even did a chkconfig --add httpd and show it is on for run levels 2345.The problem is that when I reboot the server httpd does not load because I can not access the website.However, the minute I login to the server as a user (non-root) it automatically loads httpd and the website works.Then, when I logout, everything is inaccessible again. I even tried to put the commands in the /etc/rc.local script (or wherever it is).Same thing happens.I know this is a simple fix. Just don't know what it is. Is it related to SElinux? However, wouldn't SElinux create access problems regardless of being logged in or not? Once I'm logged in, everything automatically fixes itself (either it's a service load or a rights filter fix).
Remember, everything works perfectly as long as I'm logged in to the server (even as a non-root user). Just the act of logging in makes the web server accessible from to the rest of the world. However, when I logout, the web server is inaccessible.
View 5 Replies
View Related
May 31, 2010
I'm trying to install ubuntu-10.04-server-i386 in Virtualbox on Windows XP Home (for use as a Drupal development server) using the instructions here [URL]... the Ubuntu server will not start properly. Instead it goes to an initramfs prompt as follows
[code]...
Another thread suggested typing 'exit' after a while but it just repeats the same output. It seems the root disk doesn't exist. I allowed the installer to set up partitions to its own recommendation (Guided?) although I'm not entirely sure what it did - I think there are two partitions but you guys will know that. The host disk is SATA. The CPU is a dualcore but I've only enabled one CPU on the guest within Virtualbox. Also, I had to enable PAE mode as without it Virtualbox crashed every time I started the guest. PAE wasn't mentioned in the instructions mentioned above. I've tried changing the various other disk parameters in Virtualbox (without fully understanding them) but no luck. I also ran run the boot info script from a desktop LiveCD and the results are given below.
[code]...
View 9 Replies
View Related
Jul 18, 2011
After upgrading Ubuntu to version 11, vmware-server-console stopped working - only gray window opens. After killing the process error message appears:
/usr/lib/vmware-server-console/bin/vmware-server-console: symbol lookup error: /usr/lib/i386-linux-gnu/libgio-2.0.so.0: undefined symbol: g_cclosure_marshal_VOID__VARIANT
View 4 Replies
View Related
Apr 18, 2011
I have had Ubuntu desktop on my PC for a year now and am very happy with it. A couple of months ago I got a Ubuntu server 10.04 for playing about with. I have installed the gui, for personal reasons, but I want to upgrade to 10.10
Whenever I attempt the upgrade my server becomes unbootable and I have to reimage and start again. I have even tried performing the upgrade before I install the GUI but it still makes no difference.
Although I have the GUI I am doing the upgrade via command line.
Upon watching the upgrade in process, I find that no errors are occurring. Could it be something to do with my server provider?
Server Specs are: Specification: Intel Dual Core, 2.2 GHz 800MHz FSB, 2MB L2 Cache, 2Gb DDR, 1x 250Gb HDD
View 4 Replies
View Related
Oct 13, 2010
Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
[code]...
but still no dice.
View 9 Replies
View Related
Jun 7, 2010
I have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
View 3 Replies
View Related
Sep 2, 2010
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
View 3 Replies
View Related
Oct 20, 2010
So I am creating a LDAP server for my school's Linux lab, so users on our school network can log into the Linux machines.
I found a guide here url...Authentication
But during the install, I get the following error.
update-rc.d: warning: libnss-ldap start runlevel arguments (2 3 4 5) do not match LSB Default-Start values (none)
View 2 Replies
View Related
Oct 27, 2010
I installed Ubuntu 10.10 64-bit, downloaded Adobe reader '.bin', from the terminal
It extracted and asked me for a installation location, to which i put [~]
It then finished the installation.
But when i click on the icon in the start menu or on desktop it fails to start, when i also click on a .pdf document it also fails to start!
View 2 Replies
View Related
Dec 6, 2009
I use FC8 and i want some services like HTTPD and NAMED to start at the start of the system , how to create a script to do that .
View 9 Replies
View Related
May 25, 2011
Fresh install, followed the directions,
# ./configure --with-mysql --with-openssl --with-openssl-libs=/usr/lib (MySQL 5.5.12 & OpenSSL 1.0.0)
Everything seemed to go well enough. Stock lighttpd.conf. However, it won't start on boot. Not even manually via:
# /etc/init.d/lighttpd start
or
# /etc/init.d/lighttpd -f /etc/lighttpd/lighttpd.conf (came across that while scouring Google).
No messages, no logs, nothing. ?
View 17 Replies
View Related
Apr 10, 2011
I installed IBSng in ubuntu-server .but i can not start this server :Code:[root@myserver]# /etc/init.d/IBSng start.: 8: Can't open /etc/rc.d/init.d/functions"functions" file is in RPM base system . and ubuntu have not this file
View 2 Replies
View Related
Apr 29, 2011
when i start qmail seervice it gives error#/etc/init.d/qmail startStarting qmail-toaster:
svscansupervise: fatal: unable to acquire pop3/supervise/lock: temporary failure
supervise: fatal: unable to acquire log/supervise/lock: temporary failure
supervise: fatal: unable to acquire log/supervise/lock: temporary failure
supervise: fatal: unable to acquire pop3-ssl/supervise/lock: temporary failure
View 9 Replies
View Related
Jun 29, 2011
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
View 2 Replies
View Related
Apr 11, 2010
I am trying to do a https access with virtual hosting with apache.
But when I install mod_ssl rpm httpd server does not start again
I am stumped
httpd -t shows syntax is OK
View 5 Replies
View Related
Mar 18, 2010
I am running CentOS 5.4 and Postfix. So when I start Postfix server than immediately maillog is starting to grow. And the first lines that I see in it are:
[Code]...
Server is already in several blacklists and I desperately need to do something.
View 12 Replies
View Related
Sep 9, 2009
I have one server with Jboss and Tomcat installed, I have to start these servers manually everytime I do reboot the server.How I could do to start Jboss and Tomcat automatically, when I do reboot the server?
View 1 Replies
View Related
Nov 3, 2010
I'm trying to move a mysql 5.1.50-community InnoDB database from one location to another.When starting the service I get:Starting MySQL.Manager of pid-file quit without updating file [FAILED]I've searched for a way to do this but I can only find people who describe what I've just done.
View 6 Replies
View Related
Oct 28, 2009
i've made a big update of almost 300Mb.I'had a working DNS server.Now, when i boot the box, named works and it resolves all the clients.If i make any change (enter a new client for example) and of course i restart named (service named restart), named stop but does not start again !!!In order to get a working named, i 'm obliged to reboot the box?
View 6 Replies
View Related
Mar 15, 2010
I am getting the following error when starting mysql using 'sudo /etc/init.d/mysql start':
Mar 15 16:33:56 MoodFishDev /etc/init.d/mysql[18317]: 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in
Mar 15 16:33:56 MoodFishDev /etc/init.d/mysql[18317]: ^G/usr/bin/mysqladmin: connect to
[code]....
View 1 Replies
View Related
Nov 12, 2010
how to start and stop jboss server i had done but it is saying permission denied.
View 2 Replies
View Related
Jan 22, 2011
How to start X server in Red Hat Linux.
When i booted my linux server the gui is not appearing, instead it asks to login in a non-gui textual mode.
View 4 Replies
View Related
Apr 30, 2010
My Windows Vista installation won't start after upgrading from Karmic to Lucid. If I select it on GRUB2, it leaves a blinking cursor on screen. And I tried doing the whole test disk thing and the boot info script. This is what my Results.txt file says
[Code]....
View 8 Replies
View Related
Feb 22, 2011
when I reboot the server with centos 5.5 the SMB deamon doesn't start?
View 2 Replies
View Related
Feb 12, 2010
How do I start a new X server?I boot in runlevel 5 so my 'main' console (VT1) is the GUI. So I switch to the second virtual console (Ctrl+Alt+F2) and login as same user. I try starting a new xserver (startx), but I get an error. Then I tried to google for an answer on found this on the Ubuntu forums: ok...i'm jumping in on this one and hopefully i can help. bring up another ttyl do this: ctrl + alt + f2 it'll bring you to a login screen. login as any user you have on the box (yes you can log in as yourself more than once unless you tell it not to). then start an X window in that terminal on a new server like this: xinit -- :1 vt12.
View 14 Replies
View Related
May 10, 2011
i use webmin to manage the networking tools and services and i am trying to setup an ssh server and webmin keeps telling me that the server isn't started i updated ssh by installing the source tarball from openssh.org and built and installed it. the installation was a success but i can't start the service and when i run the command
[Code]....
why won't the ssh server start i gave it a port and address whats missing do i have to downgrade the version number?
View 4 Replies
View Related
Feb 5, 2011
How to get GUI while ssh to a server? This is what I have so far.
Code:
yum groupinstall "X Window System" "GNOME Desktop Environment" on server
How to start the gui?
View 3 Replies
View Related
