I make partition on fedora-12, after that it gives me warning
kernel was unable to re-read the partition table on /dev/sda (Device or resource busy). This means Linux won't know anything about the modifications you made until you reboot.
Is it possible to reload partition without reboot, i tried partprobe as well but no luck.
We have ubuntu server and bind9 installed and setup.When I issue rndc reload or /etc/init.d/bind9 reload I got this:rndc: connection to remote host closedThis may indicate that* the remote server is using an older version of the command protocol,* this host is not authorized to connect,* the clocks are not syncronized, or* the key is invalid.If I issue named-checkconf /etc/bind/named.conf I got this:/etc/bind/named.conf.local:165: unknown key 'rndc-key'I got the key files in the right location but I'm not sure if we even need to use them.
View 2 Replies View RelatedI installed Fedora 13 to sdb7 and installed Grub to root all went well on install. But when I reboot it stops at Loading Partition.
View 12 Replies View Relatedeog notices when a PNG file changes, and offers to reload it.But it does not reload until I move the mouse over to the monitor where I stuck eog, and click ReloadHow can I make eog just reload automatically without asking -- the way evince does, for PDFs?
View 1 Replies View RelatedWhen I try to reload httpd service through commandline interface directly, it works. But when I tried to reload service of named and httpd using php exec(), it doesn't works.service named reloadservice httpd reloadThe service named is OK but httpd got problem.My OS is CentOS 5.4 .
My script:
echo exec("service named reload"); result is " Reloading named: [OK] "
but
[code]....
I have copied /usr/share/gnome-shell/themes/* to ~/.themes/myShell/gnome-shell and also the folders from Adawita and my customisations etc.
When I look in the overview - themes I can select my theme however when i reload the shell the themes option has disappeared and i get this error in looking glass:
why I get this?
Also if I load gnome-tweak-tool and select another theme, move my custom folder out of ~/.themes and reload the shell I get the themeselector loading properly again.
I am a very new Linux user (newb) so I could be missing something very obvious. I have a Toshiba Satellite L645D-S4056 and recently installed Fedora 14 (64-bit GNOME) with all sorts of updates and software.
I'm working my way through all of the hardware to get it all running properly. I figured out how to get the RealTek wireless-n adapter working. The webcam is working even with Skype which is tricky on the 64-bit version.
At the moment, my touchpad doesn't work. I see a lot of articles online about the touchpad not double-tapping, but mine doesn't work at all. I've been using a mouse for all my GUI stuff.
I went to SYSTEM --> PREFERENCES --> MOUSE and selected the touchpad tab, but I can't figure out how to make it work.
last -a shows server rebooted, how to identify the source or cause of reboot? thx reboot system boot Wed Feb 16 08:52 (02:0 2.6.21.7-2.fc8xen
View 2 Replies View RelatedI created a large partition using parted (~6TB) and XFS. Everything seemed to be fine until I rebooted the system and now I seemed to have lost that partition. The details are:
Code:
media@media:~$ uname -a
Linux media 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 GNU/Linux
[code]....
sda6 is 10.04 sda 7 was dreamlinux. Deleted DL and on reboot received error 15. Tried super grub but all Linux options fail. Can only get to win 7 I do not have to re-install. I have data galore on 10.04 and not backed up.
View 3 Replies View RelatedUsing slack 13.0 32-bit I have a dual-boot configuration with slack at sda1, sda2, sda3 and ubuntu 10.04 on sda6, sda7, sda8 When I boot into ubuntu, then boot back into slack, the date setting is change to '00.. something' (zero hours).
View 4 Replies View Related I have been having trouble installing some programs because of some dependency resolution errors. Sometimes I can work around it, and sometimes I can't.
The problem is that it looks for a package named in a different way or something.
Currently, I'm having problems installing "evolution-data-server" from source. It gives an error during configuring that says "libdb" can't be found, but I do know I have it installed.
I'm giving "reseting the repos" a shot because this might solve everything else. Basically, what I want to happen is that the package manager, and the repository list, would be back to "normal", the state where it's as if I just installed F13.
Here are screenshots of my repo list
It's tiring sorting out dependencies manually. Plus, there are no guarantees that I can have a successful installation.
I've read hundreds of threads on this problem but they seem to be intermittent and the resolution has been using a different kernel version.
I'm using the latest kernel but I still have this problem
Running Logical Volume Manager gui and attempting to extend the volume results in the same error.
I am completely new to Linux in general, and have recently downloaded Fedora 15 KDE spin. I tried dual-booting between Windows 7 and Fedora by shrinking one of my Windows partitions (I have two, this partition not containing the Windows installation). I tried shrinking it to 30 GB less than the total space available on the partition, and after pressing continue, received an error (which I unfortunately dismissed quickly and can't remember). In the file manager, Fedora showed that my partition changed from 1.3Tb to 1.2 Tb, but I couldn't access it. Upon rebooting into Windows, I still can't access it, receiving a "format drive before use" popup and then error stating that it is possibly of a different filesystem or corrupt.
Unfortunately, I stupidly didn't backup any of my data (which I will be sure to remember to do in the future). I installed EASEUS Partition Master 8.0.1 Home Edition, which states that my drive is still of NTFS filesystem and has the total space it should. However, upon clicking "check drive," it states there are no errors and when trying to "explore files," it doesn't find any (yet it shows the correct amount of used and unused space). I then tried running TestDisk, but only allows me to check my media drive E, which is my dvd drive that has my Fedora Live CD in it (which cannot be ejected manually or through Windows, an error stating it cannot be ejected). I didn't go through with TestDisk for my DVD drive because I needed to verify the type of partition (which to my knowledge shouldn't even exist). It shows 700 something MiB / 600 something MiB. Although I have decent general knowledge about computers, I am a complete novice when it comes to doing something like this.
I've just installed 10.04 in dual boot with xp, completed all updates and tried to suspend. My swap partition is the right size and I don't recall doing anything wrong yet when I wake up the computer after suspending it, the monitor doesn't reactivate and I've had to force it to shut down. And also, now it tells me "networking disabled".
View 2 Replies View Relatedwhat now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
So I've always asked this in the past when I get on a Debian system. This makes no sense to me but I just don't see how I restart network interfaces (i.e. eth0) on a standard Debian install. If I change the static I.P. address listed in /etc/network/interfaces from x.x.x.100 to x.x.x.101, I then assume I can simply do any of the following:
- /etc/init.d/networking stop | start
- ifdown eth0
- ifup eth0
- service networking stop
- service networking start
All the commands above do nothing. My only solution I know that works and implements the changes I've made is a complete system reboot which to me in Linux, is ridiculous. I've struggled with this over and over and nothing I do correctly assigns the new I.P. in the 'interfaces' file to the actual adapter. This isn't my single isolated Debian machine but every Debian machine I can get my hands on. Servers, workstations, VM's, any release, etc etc etc. Below is my interfaces configuration file:
Code:
auto lo
iface lo inet loopback
[code]...
After making an changes (add/modify/delete) to /etc/static.routes, what command should we use to reload the routing table?
View 5 Replies View RelatedI make personal site with php on wamp. When uploaded it to my debian box I make some comments in index.php like
Code:
//include(realpath('inc/inc.php'));
echo realpath('inc/inc.php');
upload the changed php file, but when try to reload the site same errors stay there. There is some cache that I have to clear but I don't know where it is. In wamp I clear wamp mp* directory What cache I have to clear? Edit: It is not my browser. I use firefox and clear everything with several times ctrl+shift+del I even delete index.php but the same errors stay at the page:
Code:
Warning: include(inc/inc.php) [function.include]: failed to open stream: No such file or directory in /var/www/site/index.php on line 3 Warning: include() [function.include]: Failed opening 'inc/inc.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/site/index.php on line 3
I was playing with a theme (Atolm-GS) and followed the install instructions which stated to back up the /usr/share/gnome-shell/theme directory, and replace it with the one from the theme. I did this, logged off, logged on, got my wallpaper for a second, then the Oh No Screen. I logged off, logged in to IceWM, replaced the theme folder with the original, logged back in to Gnome3 and same thing. Alt+F4 does not get rid of the OH No screen. My ~/.xsessions-errors file contains the following:
/etc/X11/xim: Checking whether an input method should be started. sourcing /etc/sysconfig/language to get the value of INPUT_METHOD INPUT_METHOD is not set or empty (no user selected input method). Trying to start a default input method for the locale en_US.UTF-8. There is no default input method for the current locale. Dummy input method "none" (do not use any fancy input method by default)
[Code]...
I am using GEDIT and I would like to have a shortcut key that allows me to tell GEDIT (on Ubuntu) to force reloading from file system the currently opened file.
How can I do that?
I had finally go tmy netbook set up the way i wanted it, everything was working great. The notification popups were annoying me so i was trying to disable them. I used this string in a terminal: sudo mv /usr/ share /dbus-1/services/org.freedesktop.Notifications.service /usr/share/dbus1/services/org.freedesktop.Notifications. service.disabled
After rebooting i had nothing but a taskbar.No icons, no panels, nothing but wallpaper and the taskbar. I can't even figure out how to open up a terminal.Hopefully there is a way to load synaptics and reload the desktop somehow?
Try reloading my synaptic Package manager and I get the following message after a while:-
An error occured
the following details are provided
W: Failed to fetch http://ke.archive.ubuntu.com/ubuntu/...ic/Release.gpg Could not resolve 'ke.archive.ubuntu.com'
W: Failed to fetch http://ke.archive.ubuntu.com/ubuntu/...tion-en_US.bz2 Could not resolve 'ke.archive.ubuntu.com'
W: Failed to fetch http://ke.archive.ubuntu.com/ubuntu/...tion-en_US.bz2 Could not resolve 'ke.archive.ubuntu.com'
[Code]...
I want to reload windows xp + Ubuntu from scratch, I have no experience with dual-boot installation soNow we start with a blank 250GB harddrive in my Samsung N310 netbook, and then,Plan 1: partition the whole 250GB harddrive into 2 logical disk, namely drive c: and d:, both of them are NTFS, and then format them ==> install windows xp to Drive C: ==> boot from USB drive and run Ubuntu USB installer, and let the installer do its partition for Linux's EXT3Plan2:partition the whole 250GB harddrive into 3 logical disk, namely drive c:, d: and e:, with drive c: and d: being NTFS while drive e: being EXT3 ==> install windows xp to Drive c: ==> install Ubuntu directly to drive E:
The bottom line here is that 1) there must be 2 logical drives (both are NTFS) for windows xp; 2) I want a EXT3 partition where Ubuntu resides. Can any expert kindly advise me which plan mentioned above is more viable or feasible?
I'm working on a latex document with a default installation of latex/kile. Strangely enough, upon a document change, okular does not reload and display the changes. This is contrary to all other pdf viewers that I have used. Is there anything that can be done? I noticed that in the okular settings, there is an option to "Reload document on file change." Even though it is enabled, okular does not oblige.
View 1 Replies View RelatedI have written a shell script which amongst a heap of other stuff creates virtual hosts, and consequently also reloads apache, however my problem is that unless I include a restart in the shell script, the reload is causing the server to stop, yet restarting everytime a new vhost is created is not really an option since it will disrupt the service for other users. I know this is directly to do with the SSL passphrase as simply restarting gets everything running again with no errors.
I have configured mods-available/ssl.conf so the SSLPassPhraseDialog directive uses the passphrase file instead of bulletin, hence the restart can work fine from within the shell script, but obviously reload and force-reload must be running some sort of background process which involves reloading the SSL certs or something?? so my question is can I over ride this and if so what directive / params do I use? Im on ubuntu lucid 10.04 server and apache v2.2.14.
I have just install conky to my Linux Mint 9 system.I like to know if I can set up conky to auto reload a webpage.FYI, the webpage do not have rss feed therefore I cannot set conky to use rss.
View 10 Replies View RelatedWhat's the command to reload .vimrc without restarting vim?
View 2 Replies View RelatedLike in the subject. Does anyone knows how to do it without restart
View 1 Replies View Relatedfrist i want to thank all who worked on this website i was install squid and other service in my office network server and install the same services with same configration on biger network about 150 machines every thing well on office network but the other network have problem squid hang and stoped serve any request and squidclient command return "alarm clock " message after many time but the service still run at port 3128 and status is started when i run /etc/init.d/squid reload its run again sometime and hang again squid log file have not any problem on it i install my server on gentoo with flags
Code:
net-proxy/squid-3.0.19 USE="zero-penalty-hit -caps -epoll* -icap-client (-ipf-transparent) -kerberos -kqueue -ldap -logrotate* -mysql -nis -pam (-pf-transparent) -postgres -radius -samba -sasl (-selinux) -snmp -sqlite -ssl"
my squid.conf
[code]....