I am trying to remotely access a linux machine to run Cadence from my laptop.I downloaded Putty and Xming/XLaunch.I run Putty, enable X11 forwarding, then sign into my host address.I am successfully able to access and navigate through my home directory, however once I try and run Cadence, I get the attached error.
View 4 RepliesI've been spending sometime trying to setup anclient on windowso access my fedora serverI'm currently using xming but there's no way whatsoeverme to make gnome available remotely. The closest I got was to open a standard X session with no icons but just a terminal.Is there any quick sanity check I can do before spending more time on this
View 2 Replies View RelatedI was installed xming application on windows XP & Windows 7to access Linux server's GUI session and i was able to access it using root account but when ever iam trying to access GUI using normal account it is giving some error.I am testing this since it is a freeware.
View 7 Replies View RelatedI am out of ideas of how to run videos at a remote machine that has a display. I have a debian system with gnome installed and everything is set up but I just don't now how to start the video over anything. I have tried simply to start #vlc video file - but this way it thinks that I want to run it in my bash over at a nother computer. I tried installing vnc but this just ports a new desktop and masically is a terminal which does not give me any control over the display.
View 7 Replies View RelatedI am using CentOs 5.5.
I use Putty to ssh from my windows laptop to a remote CentOS machine. Is there a way to start a shell that doesnt dies when I disconnect so I can connect again and reclaim it?
I have X Window running on one of RHEL Machine 192.168.2.2.I have logined through putty from remote Windows Machine 192.168.2.5. Now What I need to open the xterm (if I run the command through putty it should open xterm in the linux Machine).
View 2 Replies View RelatedExecute putty to start a script on a remote linux server which requires user input The remote script does a read -p "Please enter name" NAME I can use plink to execute a script over SSH, the following attempts and problems are shown below :- Note the -load ns is to load a session that doesnt exist, ie ensure no defaults are used
1) plink.exe -load ns <ip_addr> -l <user> -pw <password> <script path/name> Problem) Doesn't allow/show user input, ie its non-interactive.
2) Add -t to allocate a pty :- plink.exe -t -load nc <ip_addr> -l <user> -pw <password> <script path/name> so now the user input can be seen, but I get Ctrl+H (^H) when backspace is pressed, ok if the user doesnt make a mistake!
3) Use putty instead with a saved session putty.exe -load "SavedSession" Get a new window opened, not a biggy, but not as nice. (b) saved session cannot be easily moved. (c) Get password prompt, cannot provide password like with plink, I know I know, use keys, but this is a closed, private network, and its easier not to bother with keys!I would like the SSH to execute in-line, that is from within the batch file/command line shell I am in, not prompt for username/password, run the linux script and allow prompts and delete/backspace to work.
I have a database in SQL Server 2005 in my local Windows System and I want to import this database to my linux (ubuntu) server remotely using putty.
View 5 Replies View RelatedSeemingly simple question, which yields slightly undesired results. Execute putty to start a script on a remote linux server which requires user input The remote script does a read -p "Please enter name" NAME I can use plink to execute a script over SSH, the following attempts and problems are shown below :-
Note the -load ns is to load a session that doesnt exist, ie ensure no defaults are used
1) plink.exe -load ns <ip_addr> -l <user> -pw <password> <script path/name> Problem) Doesn't allow/show user input, ie its non-interactive.
2) Add -t to allocate a pty :- plink.exe -t -load nc <ip_addr> -l <user> -pw <password> <script path/name> Problem) Ok, so now the user input can be seen, but I get Ctrl+H (^H) when backspace is pressed, ok if the user doesnt make a mistake!
3) Use putty instead with a saved session putty.exe -load "SavedSession" Problem) (a) Get a new window opened, not a biggy, but not as nice. (b) saved session cannot be easily moved. (c) Get password prompt, cannot provide password like with plink, I know I know, use keys, but this is a closed, private network, and its easier not to bother with keys!
So ideally, I would like the SSH to execute in-line, that is from within the batch file/command line shell I am in, not prompt for username/password, run the linux script and allow prompts and delete/backspace to work.
How I can get access to my Gnome Desktop through PuTTY?
View 2 Replies View RelatedI've seen other posts on this issue, but don't know if they were ever resolved. I've tried some of the suggestions but none seemed to apply.Flavor - 10.10 Issue - Access via VNC after reboot
All in all, I have had nothing but success with Ubuntu, being that I'm no to it, but knowing what I need, I can usually find the solution. My problem is accessing via VNC after a reboot. The issue is the keys (keyring)
Router is setup for SSH on 22 for PuTTY to work, 5900 for VNC to work. If I am at the machine and login, VNC is possible from outside. Should I be running a different server other than the Remote Desktop that is included?
Is there a way to login via SSH to unlock the GUI to allow VNC access? I would not even bother with GUI, but I'm not there yet with the CLI To all that have suggested I learn it, believe me I'm working on it. All of us out there that have the Swindows syndrome have an uphill battle. I can't be the only one up against this. If anyone who has serious skills could take 5 minutes and peek. I can't think of any other information that I could supply. If there is,
My company blocked port 22/23 for telnet and SSH which would have been quite nice to access my box at home.I found a page on the net (URL...) which works perfectly fine, but due a demo version stops after 20 seconds.Does anybody know a similar page or any other way I could remote access my PC?
View 3 Replies View RelatedI installed teamviewer recently. I can remotely access a windows system from my fedora machine. But i cannot access my fedora machine from the windows machine.
The windows machine is unable to connect to the fedora machine. Do I need to open some ports on fedora machine ?
I got an old PC I am using as a game server (Counter Strike and Left 4 Dead), it's a dual core Athlon 5000+ with 2GB Ram, the motherboard is kinda old and has a SiS Chipset with terrible graphics causing the video to flicker at somewhat high resolutions (anything above 1280x1024 will cause problems).I decided to add a Geforce 8400GS just so I don't have to deal with that terrible onboard VGA, upon installing the card I noticed the VNC is unusable, awfully slow over a 1gbps lan. I have installed the kmod drivers and it hasn't changed anything
View 4 Replies View RelatedNew Fedora 13 Install. I have Remote Desktop Enabled. I can access the machine from itself but not others on the network. I stopped the firewall, that did not work. I looked in hosts.allow and hosts.deny, no entries there. The vino server is running. There is nothing in /varlog/messages, dmesg or /var/log/secure, at least nothing I could find related to vino. What else can I check? The conf file in my home folder looks exactly like one on another machine where it is working. forgot to add the message I get when I try it from a remote machine is "The connection to host 192.168.1.100 was closed". So it appears something is actively rejecting the login.
View 6 Replies View RelatedWe have a fedora 10 server that the company connects to with other computers in the office. The file everyone access, public_share has no restrictions to the people that use it. We have another file, art_share that is password protected and everytime someone wants to access it they must login with it, but there are only 3 people out of the 15 that need to access it. Everyone needs to access public_share at some time.
My question is: is there a way to limit the permission for certain remote users to public_share so that they cannot write or execute, but at the same time allowing others full permission? I tried to do use chmod, but then it changes everyone's permission (I assume because of the remote access).
I'm trying to access a remote computer by tunnelling VNC through ssh. I've used VNC for years, but never through ssh. Both computers are running Fedora 14, installed by me. Doing a general Internet search, I found three articles, and they all had basically the same instructions. However, they don't seem to work. Here's what I did. Call my local computer "computer A," and the remote computer "computer B." I installed vncserver on B using yum:
(1) yum install tigervnc-server
(2) Then on B I started the server:
vncserver The first time you do this, you're asked to set up a password. Everything else was automatic. I did nothing to /etc/sysconfig/vncservers.
(3) With vncserver running on B, on A I issued the following command:
ssh -L 5901:localhost:5901 username-on-B@IP-address-for-B After giving the password, this logged me into a terminal session on B.
(4) At that prompt on B, I issued this command:
vncviewer localhost:1 According to the tutorials I found, this is the last step. The desktop window on B should open. It does not work. The following error was given: vncviewer: unable to open display "" What am I doing wrong? How does one tunnel VNC through ssh?
I am trying to ssh a remote box from putty but I am getting following error. "No supported authentication methods available" I don't have access to the server so I must have make my ssh client compatible to ssh server. This is the trace from another client
[SSH] Protocol Version 2 (OpenSSH_5.3p1 Debian-3ubuntu6)
[SSH] Cipher: aes128-ctr
[SSH] FAIL: Unable to authenticate
[SSH] INFO: DISCONNECT
I recently configured a server that I would like to access remotely. I want to start x through ssh and then log in through vnc, but I get prompted to type in my password in gnome before I have a change to login. Which is a problem because you need to be at the box to enter the password. Is there a way to authenticate this through ssh or give vnc automatic keychain access?
View 2 Replies View RelatedUnable to access Apache from remote server..
Also, my php pages won't load..and php is installed.
I am trying to setup a putty session to putty from one Ubuntu machine to another. I know how to setup to connect to the machine from Windows and I am using the same settings for the one I am trying on the Ubuntu machine but it fails to connect. It fails immediately so I believe that putty is not able to find ssh. Is there some configuring that I need to do.
View 7 Replies View RelatedI'm trying to open port 8080 on my application server. I've included it in my iptables; however I still cannot access through ssh nor putty and it doesn't show up when I netstat either.Here is my iptables-config:
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -i eth0 -s xxx.xx.x.0/24 -j ACCEPT
[code].....
Code...
The server is running under debian sid and the client under fedora 13 beta. I don't have any idea what may be wrong.. selinux perhaps?
I've got a USB Epson Perfection1200 (usb-id: 04b8:0104) connected to my Fedora 13 x86_64 system. The scanner works fine for me, the console user. If someone logs in to the system via "ssh -X ..." and starts "xsane", xsane reports that no scanner is available.
Googling turns up countless recommendations, mostly identical, which pretty much say:
1. find usb device (lsusb)
2. find bus and dev IDs
3. chmod 666 /dev/bus/usb/BUSID/DEVID
this is a best a miserable hack. I would like to know how to adapt the permissions that hald uses when a usb device is connected. Does someone understand this and can explain it?
My linux PC is connected at work and I was able to configure the IP to connect to the network. I need a way to access the linux computer from other windows PC in the office via shared folders and or remote desktop. I am stumbling upon "VNC" on google.
View 1 Replies View RelatedHow can i connect to FortiGate1 SSL VPN Remote Access router from Fedora/CentOS or Ubuntu/Debian?It only working with Windows Internet explorer for the moment using Vbox (But i cant use Windows only for this)How can i use it from my favourate Linux?
# vpnc
Enter IPSec gateway address: xx.xx.xx.42
Enter IPSec ID for xx.xx.xx.42:
[code]....
I currently have two computers at my desk, 1 is Fedora 12 and the other is Windows Vista. I am using the synergy client to share mouse/keyboard but I would like to run Xming which is a Xserver for windows to display on my Windows machine. I have 3 monitors 1 is connected to the Linux machine and then I have 2 connected to the windows vista and I want to share 1 one using a windows Xserver. I have the server installed and setup on my windows machine and I just curios on how to configure my Xorg.conf file to use my Xming Xserver as a seccond monitor.
View 3 Replies View RelatedThe application is Ericsson CDMA C-EMS V1702 and the tool allows a user to remotely log into an Ericsson/Nortel CDMA Base Station Manager server at a Mobile Telephone Switching Office.I hope I can explain this well, I will include screen shots:Here are the steps I follow:[URL]
View 4 Replies View RelatedI have a openSUSE 10.3 box with kde and gnome on it.I can enter in Kde or Gnome from that machine but from remote (using Xming) I can enter only to the KDE.After I introduce the username and password nothing happens.Why I could not enter in the Gnome environment too?
View 5 Replies View RelatedI had Xming working great with XDMCP on my Debian 6 server at work. I had to replace the UPS and when I brought the machine back up xming/XDMCP no longer worked correctly. When I launch Xming and connect to XDMCP session I get the Xming window, the X Cursor but the GDM login window never appears. So I am getting some level of connectivity. The only change that was made to the server was that OpenVPN service was turned on. I do not know if this is the right log to be looking at but /var/log/gdm3/:0-greeter.log has this in it a number of times:
(polkit-gnome-authentication-agent-1:2252): polkit-gnome-1-WARNING **: Error enumerating temporary authorizations: Remote Exception invoking org.freedesktop.PolicyKit1.Authority.EnumerateTemporaryAuthorizations() on /org/freedesktop/PolicyKit1/Authority at name org.freedesktop.PolicyKit1: org.freedesktop.PolicyKit1.Error.Failed: Cannot determine session the caller is in