I have a database in SQL Server 2005 in my local Windows System and I want to import this database to my linux (ubuntu) server remotely using putty.
View 5 RepliesIf you would share the different options to access MS SQL 2005 using C? We are using gcc compiler.
View 2 Replies View Relatedi have configured ldap server on a Debian5. But Am failing to import base.ldif, mygroup.ldif and myuser.ldif into my ldap database. How can i do that?
View 1 Replies View Relatedi am having a problem while hosting a website on rhel apache server.when i write the url on browser than its doesnt show any page ,neither it displays any error.However when i am hosting a simple php webpage apart from that website its works fine.i also want to know how can i import a databe file in mysql which is a part of that website.
View 3 Replies View RelatedI've down loaded mysql database file and now I'm looking at adding it into a new dedicated server. Should I upload that sql file to the root folder I created for the domain and insert it with shh like that? If not where should I upload this mysql file to insert it to the new database. It's rather large so I have to use SHH Fir example if this is the code,
Code:
mysql -uUSERNAME -pPASSWORD DATABASENAME < MYDATABASE.sql
where is that actual location of MYDATABASE.sql
I have created a website in php.wamp server is used to run the site.i created the database in phpmyadmin using mysql.These all were done in windowsXP.Now I want to import it into redhat linux system.how can I import database and its tables to rhel4 inorder to working the website properly
View 7 Replies View RelatedI am running RHEL5 and I have just upgraded my RPM software manager from RPM version 4.4.2 to RPM version 4.9.0 (the latest version) by doing a clean install of v4.9.0. The version 4.4.2 came with the RHEL5 and at the moment is very old so I cannot install certain newer rpms. I followed the INSTALL instructions that comes with the tarball for V4.9.0. The problem is the new install (i.e. RPM V4.9.0) has no knowledge of my old RPM manager i.e. V4.4.2, hence it does not know of the rpm packages installed on my system.
I think the problem is that the V4.9.0 is a new install rather than an upgrade (There are no instructions on how to perform a 'real' upgrade). I have tried to rebuild the rpmdb for v4.9.0 but that does not help and I have no idea how to import the data from v4.4.2 database to v4.9.0 database. My question is, how do I import the database from RPM manager V4.2.2 into RPM manager V4.9.0 or how do I 'upgrade'properly from V4.4.2 to V4.9.0. I have trawled the internet for some guides but there does not seem to be anything regarding this.
I am out of ideas of how to run videos at a remote machine that has a display. I have a debian system with gnome installed and everything is set up but I just don't now how to start the video over anything. I have tried simply to start #vlc video file - but this way it thinks that I want to run it in my bash over at a nother computer. I tried installing vnc but this just ports a new desktop and masically is a terminal which does not give me any control over the display.
View 7 Replies View RelatedI have X Window running on one of RHEL Machine 192.168.2.2.I have logined through putty from remote Windows Machine 192.168.2.5. Now What I need to open the xterm (if I run the command through putty it should open xterm in the linux Machine).
View 2 Replies View RelatedExecute putty to start a script on a remote linux server which requires user input The remote script does a read -p "Please enter name" NAME I can use plink to execute a script over SSH, the following attempts and problems are shown below :- Note the -load ns is to load a session that doesnt exist, ie ensure no defaults are used
1) plink.exe -load ns <ip_addr> -l <user> -pw <password> <script path/name> Problem) Doesn't allow/show user input, ie its non-interactive.
2) Add -t to allocate a pty :- plink.exe -t -load nc <ip_addr> -l <user> -pw <password> <script path/name> so now the user input can be seen, but I get Ctrl+H (^H) when backspace is pressed, ok if the user doesnt make a mistake!
3) Use putty instead with a saved session putty.exe -load "SavedSession" Get a new window opened, not a biggy, but not as nice. (b) saved session cannot be easily moved. (c) Get password prompt, cannot provide password like with plink, I know I know, use keys, but this is a closed, private network, and its easier not to bother with keys!I would like the SSH to execute in-line, that is from within the batch file/command line shell I am in, not prompt for username/password, run the linux script and allow prompts and delete/backspace to work.
Enable remote access to MySQL database server I used the link above to enable remote access to mysql for a specific user. But when I try to telnet 3306 or user mysqladmin to connect, both just hang there. Using mysql 5.0 on opensuse 11.1
View 1 Replies View RelatedSeemingly simple question, which yields slightly undesired results. Execute putty to start a script on a remote linux server which requires user input The remote script does a read -p "Please enter name" NAME I can use plink to execute a script over SSH, the following attempts and problems are shown below :-
Note the -load ns is to load a session that doesnt exist, ie ensure no defaults are used
1) plink.exe -load ns <ip_addr> -l <user> -pw <password> <script path/name> Problem) Doesn't allow/show user input, ie its non-interactive.
2) Add -t to allocate a pty :- plink.exe -t -load nc <ip_addr> -l <user> -pw <password> <script path/name> Problem) Ok, so now the user input can be seen, but I get Ctrl+H (^H) when backspace is pressed, ok if the user doesnt make a mistake!
3) Use putty instead with a saved session putty.exe -load "SavedSession" Problem) (a) Get a new window opened, not a biggy, but not as nice. (b) saved session cannot be easily moved. (c) Get password prompt, cannot provide password like with plink, I know I know, use keys, but this is a closed, private network, and its easier not to bother with keys!
So ideally, I would like the SSH to execute in-line, that is from within the batch file/command line shell I am in, not prompt for username/password, run the linux script and allow prompts and delete/backspace to work.
I am trying to ssh a remote box from putty but I am getting following error. "No supported authentication methods available" I don't have access to the server so I must have make my ssh client compatible to ssh server. This is the trace from another client
[SSH] Protocol Version 2 (OpenSSH_5.3p1 Debian-3ubuntu6)
[SSH] Cipher: aes128-ctr
[SSH] FAIL: Unable to authenticate
[SSH] INFO: DISCONNECT
Trying to get OpenbavoPOS to connect to my remote Postgresql database, but so far i've only been able to connect to the local postgres installation. I _am_ able to access the remote databases with psql. I've read literally dozens of pages, and am pulling my hair out. I'm trying jdbc:derby.//192.168.15.10:5432/bravo I get back java.sql.SQLException no suitable driver found for jdbc:derby.//192.168.15.10:5432/bravo If I use jdbc:derby./root/bravo - all is OK, using a local database created in /root I have jdk installed on the client; does it need to be on the server also?
Server = CentOS 5.4 PostgreSQL version 8.1.21
Client = CentOS 4.8 PostgreSQL version 8.1.4
[code]....
I am importing my project to another machine on my LAN to the directory:
/srv/svn/repos/my-repo
where my-repo was created via svnadmin create option
The permissions of /srv/svn/repos/my-repo are
drwxr-xr-x 6 svn svn 4096 2010-04-19
17:30 my-repo
I executed following command to import myProject files to my-repo on remote system
sudo svn import -m "First import" myProject svn+ssh://baltusaj@192.2.12.133/srv/svn/repos/my-repo
This command started 'Adding' files but gave following error after 'Adding' 7 files
svn: Can't open file '/srv/svn/repos/baltoros-valgrind/db/txn-current-lock': Permission denied
I'm trying to connect to a remote database but can't connect directly (I think due to security reasons). Here's the setup:
Computer A - my computer
Computer B - server, I can SSH to this from computer A
Computer C - server that runs database, I can SSH to this from B but can't from A
Any ideas how I can can connect to C directly from A? I think I need to setup a tunnel or something like that but I can't figure it out.
I have logged into one Linux VM and I want to test remote access to another Linux server on the same network but I cannot recall the Linux application to call?
View 10 Replies View RelatedHow can I make the user in remote LDAP server to be used to authenticate Local Linux server ?
View 5 Replies View RelatedI am trying to remotely access a linux machine to run Cadence from my laptop.I downloaded Putty and Xming/XLaunch.I run Putty, enable X11 forwarding, then sign into my host address.I am successfully able to access and navigate through my home directory, however once I try and run Cadence, I get the attached error.
View 4 Replies View RelatedI can't figure out why I keep getting kicked out of the ssh session almost immediately after login to an ubuntu 9.10 server (32bit).See the screenshot. I just installed this server and didn't make any ssh config options. I thought it would work right away.When I ping that server I get sporadic responses where some packets are lost. It's an old Dell poweredge 1400.where should I start troubleshooting? Authentication? Hardware?
View 4 Replies View RelatedI am using CentOs 5.5.
I use Putty to ssh from my windows laptop to a remote CentOS machine. Is there a way to start a shell that doesnt dies when I disconnect so I can connect again and reclaim it?
Whats the best way to setup a cluster for HBase database system?
View 1 Replies View RelatedI use PuTTY to connect to an Ubuntu Server (VPS). I would like to use Tab-Completion when I'm working with the command line on Ubuntu Server... How can I configure it?
View 1 Replies View RelatedThe whole day was more or less spent reinstalling a basic Gnome Ubuntu system. Everything went swimmingly until I started with the XBMC part of the installation. After wrestling with PPAs and apt-get for hours I finally got it installed, but then it all turned awkward in a hurry. It simply refused to start up. I clicked the icon and nothing happened for a good few seconds. The screen then flickered black for an instant, but after that nothing. I started from a terminal and it showed an error message saying it couldn't import Python's os and shutil modules. I found that mighty strange since both modules are part of the Python Standard Library.
Finally, in a bizarre twist, it turns out this doesn't seem to be a XBMC problem, suddenly apt-get started complaining too. TL,DR: I (nor the system) can't import any Standard Library modules in Python in Ubuntu! Is this a path problem? Or have I actually managed to uninstall some vital python packages, if so which ones? I am running Ubuntu 10.10, but I don't think this is necessarily a Ubuntu specific problem. Here are some dumps to show the error messages: (I forgot to copy the XBMC error message, but it looked exactly the same as these below, i.e., it couldn't import the os module) First from apt-get:
Code:
tv@tv:/usr/lib$ sudo apt-get autoremove
[sudo] password for tv:
Reading package lists... Done
Building dependency tree
[code]....
I've been allowed to work on the server of a forum. I was given the username and password, and with them logged in successfully on the server using PuTTY, but now I'm not sure what command I use to do anything to the users on the forum For example how would I change someone's username or password, etc.
View 3 Replies View RelatedI have a server program in ubuntu which i run using putty remotely. My problem is that when i closes my putty window, my server automatically closes and stop working.
I want that once i start my server it remains on when i closed my putty window.
I would like to learn basic linux commands and editors (eg : vi). Am using windows and it is difficult for me to install linux in ma laptop. So is there any free linux login servers available in internet so that I can login to server with putty and try using basic linux commands and editors.
View 4 Replies View RelatedOn Linux I do:
rdesktop remotepc
How do I copy and paste between my local system and the remote system?
i try to write a script to start and stop jboss service from remote systems. starting and stopping jboss service is working fine on local system. when i try to start jboss service from remote system . i not able to start jboss service.
View 1 Replies View RelatedI am trying to setup a putty session to putty from one Ubuntu machine to another. I know how to setup to connect to the machine from Windows and I am using the same settings for the one I am trying on the Ubuntu machine but it fails to connect. It fails immediately so I believe that putty is not able to find ssh. Is there some configuring that I need to do.
View 7 Replies View Related