Fedora Networking :: Can't Access Remote Desktop
Jul 16, 2010
New Fedora 13 Install. I have Remote Desktop Enabled. I can access the machine from itself but not others on the network. I stopped the firewall, that did not work. I looked in hosts.allow and hosts.deny, no entries there. The vino server is running. There is nothing in /varlog/messages, dmesg or /var/log/secure, at least nothing I could find related to vino. What else can I check? The conf file in my home folder looks exactly like one on another machine where it is working. forgot to add the message I get when I try it from a remote machine is "The connection to host 192.168.1.100 was closed". So it appears something is actively rejecting the login.
View 6 Replies
ADVERTISEMENT
Feb 19, 2010
Running Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
View 1 Replies
View Related
Feb 23, 2011
my g/f was able to access her jobs computers from home in Windows. she'd go start->program->access->connect to remote desktop... (or something like that) in any event, i've found some programs in Fedora 14 that say they'd do the same, however i can't get it to work. in "remote desktop viewer" i'm trying to use 'VNC' protocol,and trying to put the ip in the first of the "Host" lines.
now, there might be another issue, is it possible she need more info than the ones she got in order to use LINUX remote desktop? she has (what she has written down as) Computer # 111.111.111.11 and then ';' and 4 additional numbers, so (for the sake of the example) computer#: 111.111.111.11;2222 she has a 'username' and a 'password'.
View 1 Replies
View Related
Mar 13, 2011
I just set up Remmina the other day to be able to access my desktop remotely. However, I can only do this when I am connected to my home network. Is there a way to set up Remmina so that I can connect to my desktop remotely from outside my home network?
View 4 Replies
View Related
Feb 7, 2010
They are running Kubuntu. How to access their desktop from my home or office using Internet. Logically I remembered about kfrb and X11-vnc. But both of them need some approach to provide security. I'd like if someone could give me some pieces of advice on choosing the simplest and better approach:
To secure kfrb or x11-vnc is simpler or better to mount a vpn or to use an ssh tunnel? Is there any other solution? My pearents ISP use DHCP, so I think it would require some service like dyndns or similar...
View 2 Replies
View Related
Feb 17, 2010
I have 4 boxes on a local network: 2 with XP only, 1 with Ubuntu 9.10 only, and 1 with both. All boxes can share folders, set up with share-admin instead of using Nautilus right-click properties for each folder. I can see and control the remote desktops on all boxes, to all other boxes, from all other boxes,with one exception: I can only access the XP desktop on the dual boot box, not the Ubuntu desktop. When I try I get: "Connection to host 192.168.1.102 was closed." I am refused access to the Ubuntu desktop in this manner from both the other Ubuntu machine, and from both XP machines.
My setups are basically plain vanilla with routine installs of Ubuntu 9.10. On the XP machines I am using TightVNC on the XP machines to view both other XP desktops, and the Ubuntu desktop that is accessible. On both Ubuntu setups I am using (I suppose) vino and vinagre, and have completely re-installed what I think is the relevant software. There is no firewall running on the Ubuntu dual boot, when I check ufw. For reasons I cannot determine the inaccessible Ubuntu desktop is not providing its own address but instead in the Remote Desktop config dialogue it identifies itself as 27.0.0.1 which I think is the loopback id. I know so little about this sort of networking that I am not giving all relevant info, but I still thought I'd try.
View 1 Replies
View Related
Jun 17, 2009
I want to access RHEL5 by remote desktop from windows XP.
View 1 Replies
View Related
Jan 8, 2010
Setting up desktop (9.04) behind router for remote access by latptop (9.10) I am setting up desktop (9.04) behind router for remote access by latptop (9.10). Rationale: All of my files are on my desktop HD, but I am often out of my home needing to work on my files. It is becoming labour intensive to keep track of the files I make/change and try to copy them on my non-connected desktop/laptop.
Dream: Able to remote access and modify my desktop files from my laptop (while the files remain on the desktop). Request: A simple, GUI, basic, non-technical guide how to set it up!
What I know: 1.I was going to use the 'Remote Desktop' VNC connection under System->Preferences. However, if I understand this correctly, this only secures my computer (i.e. Locks the front door of my desktop) and the data streamed between them is not encrypted.[URL]..
2.Then I need to set up my router to accept the connection from my laptop.
3.Then I will need to use SSH to secure the info sent between them. This is the bit I don't really have a good grip on.
[Code]...
View 5 Replies
View Related
May 22, 2010
Alright so i just wanted to try and get remote desktop connections running so i can access files on the other computers in my house. For my first try i went after my laptop. I'm using rdesktop.
First couple times i tried i typed in
Code:
After about 15 seconds it would pop back with
Code:
I realized that my laptop's firewall was blocking the packets, so i created a custom rule that allows all TCP packets on port 3389. So i fired up rdesktop again. Now it pops back with:
Code:
But instantaneously, not after 15 seconds (not sure if thats significant or not.) I checked my firewall's log and it allowed the tcp packets.
View 6 Replies
View Related
Jun 28, 2011
My linux PC is connected at work and I was able to configure the IP to connect to the network. I need a way to access the linux computer from other windows PC in the office via shared folders and or remote desktop. I am stumbling upon "VNC" on google.
View 1 Replies
View Related
Dec 3, 2010
I am at a loss. I can not access my work remote desktop via the terminal server client on my wired box running Ubuntu 10.10. My wireless laptop is able to connect right away once I established the VPN connection. The VPN connection is established on both boxes with no problems.
When I tried the Terminal Server Client on my wired boxed, it says it can not establish a connection. Yet my wireless box gets connected immediately!
I check the /etc/dhcp3/dhclient.conf and the /etc/resolv.conf to see if there were any differences, but they are essentially the same. When I have the vpnc connection, they both recognize it and I am able to ping the IP address shown when I do a "ifconfig" on the terminal.
What can be the problem? Anything I need to configure on a wired computer versus a wireless one? What else can I check?
View 7 Replies
View Related
Jun 12, 2009
My company blocked port 22/23 for telnet and SSH which would have been quite nice to access my box at home.I found a page on the net (URL...) which works perfectly fine, but due a demo version stops after 20 seconds.Does anybody know a similar page or any other way I could remote access my PC?
View 3 Replies
View Related
Jan 10, 2011
We have a fedora 10 server that the company connects to with other computers in the office. The file everyone access, public_share has no restrictions to the people that use it. We have another file, art_share that is password protected and everytime someone wants to access it they must login with it, but there are only 3 people out of the 15 that need to access it. Everyone needs to access public_share at some time.
My question is: is there a way to limit the permission for certain remote users to public_share so that they cannot write or execute, but at the same time allowing others full permission? I tried to do use chmod, but then it changes everyone's permission (I assume because of the remote access).
View 9 Replies
View Related
Jul 8, 2009
how to connect fedora 10 using remote desktop? i have a notebook and a desktop. both machine is in same LAN. and Both machines are using fedora 10. i would like to access my desktop from my notebook. how to do this? i have installed the remote desktop. and vnc viewer. but couldn't get thorugh it...
i have done this.
1. sudo yum install vino
2. intall vnc viewer.
View 3 Replies
View Related
Feb 3, 2011
I'm trying to set up the Remote Desktop and am not getting anywhere. No matter what I do it seems that I'm only able to set it up to be viewable locally, over the local intranet. Do I need to open specific ports on a router? If so, what ports? Is there anything else I need to configure?
View 2 Replies
View Related
Jun 23, 2009
This is a strange problem, 2 Fedora 11 machines, both Dell's. On machine A, remote desktop is okay. On Machine B, remote desktop display is corrupt/unusable.
However, prior to upgrading to Fedora 11, both machines had Fedora 10, and, remote desktop on Machine A was corrupt and Machine B was okay.
Any idea what happened? Why did the upgrade fix one and break the other? Both machines where upgraded with Pre-upgrade. The two machines are in to separate locations, un-related to each other.
View 1 Replies
View Related
Jan 6, 2010
I am trying to set up a remote server on an old desktop that i have and i am running into problems. I have the packet installed but i can not get it to run. When ever I enter /sbin/service sshd start
I get Generating SSH1 RSA host key:[FAILED] and i can not for the life of me figure it out. Running fedora 12
View 2 Replies
View Related
Mar 16, 2010
I am a Linux newbie. I am trying to see if it is possible to access a windows pc through some form of vpn/rdp setup. My machine is dual boot with Windows XP. On Windows XP, I am able to connect to my office via VPN client to connect to my office, then Remote Desktop to my local machine on the network.. Is there some way for me to do this with Linux? I find it really annoying to have to boot to Windows just to access my work pc.
View 9 Replies
View Related
Apr 23, 2011
Most discussion of lightweight desktops seems to focus on cpu and/or gpu load. I want to ask a different question (though it may have the same solution): how to set up a secure remote desktop server for students to minimise network load. My current setup (gnome plus vncserver, tunneled over ssh) is certainly a bad choice, but I'm having trouble finding the right information about what to choose. My current best guesses:LXDE (not too unfamilar to students used to gnome)NX (generally said to give better compression) Is this a reasonable compromise? Is there a better solution? host server settings to reduce network load client settings the students could use to minimise network load security implications of distributing the nx ssh session key widely
View 1 Replies
View Related
Aug 28, 2009
My home linux box is behind a Linksys WRT110 router. I have enabled the Remote Desktop from System-->Preferences-->Remote Desktop. I then run TightVNC from my WinXP box. As I wish to run a secure connection, my first obstacle comes from PuTTY.
In PuTTY, my settings are as follows:
Host Name(or IP address) Port
xxx.xxx.xxx.xxx 22
SSH-->Tunnels:
[code]....
I recieve "Network error: Connection refused" I have gleened all of this information from other boards and tutorials. I know there is something critical that I am missing.
View 3 Replies
View Related
Nov 7, 2010
I have recently installed fedora 14 and configured vpn to access my work network. I need to access some windows machines which although I can ping I cannot remote desktop into. When I go to Applications>Internet> Remote Desktop Viewer and put in the machine name (either just the machine name or the FQDN including the domain name) I get an error "Connection to <machinename> was closed".
View 4 Replies
View Related
Jan 15, 2011
is it possible in the standard remote desktop viewer in Fedora 14 to use RDP instead of VNC protocol? I know that Ubuntu provides this feature. I already installed tsclient and rdesktop but that didn't help.Before you say I have to use VNC: I know... I am just curious how I can set up RDP to connect to Windows based machines.
View 2 Replies
View Related
Aug 7, 2011
Weird thing going on on my headless lenny box. The shared desktop won't let me in.I am trying to connect with my Mac, ssh is ok. I can connect, start vino-preferences, change everything I want to change, and still it won't let me in. both Mac Ctrl-k to vnc://lenny and Chicken of the VNC won't connect.
View 2 Replies
View Related
Nov 21, 2010
so it's been a while [a long while!] since I needed any desktop access to my suse server.... what are my options for an RDP server these days? VNC and.....? is there anything else? anything better?
View 9 Replies
View Related
Aug 21, 2011
I use a hosted machine for work which has vnc and apache servers running. To work on a shell, I connect to the VNC server, and to access files I host them using apache and open them from my browser. It would be great if I can access my shells via my browser itself instead of using VNC or command prompt.
I am looking for an end result like this: [URL].. What are my options? PS: I already tried [URL]..but this uses a java applet to run and does not do it in browser itself.
View 2 Replies
View Related
Sep 22, 2010
what is a good software i can use to rdp to my linux rh5 from a windows computer
View 3 Replies
View Related
Aug 31, 2009
I've just been tasked with making our company's workstations available from remote locations over our internet connection. While it seems simple in concept, I know there will be several issues I'll have to deal with. What I'd like to know is if anyone has recommendations as far as software to use and methods for securing connections. I'd like to have communications encrypted, which last I heard OpenVNC couldn't do (maybe that's not the case?). Also, I'm not really sure how the interactions between windows clients vs. my linux server and the remote connections should be handled. Would I need a separate instance of say, OpenVNC, on each client that I wanted to be allowed remote access?
View 3 Replies
View Related
Nov 10, 2010
There are things I have to when im at school and I need to access my slackware file and destop or the (X)
View 13 Replies
View Related
Oct 28, 2010
I have just installed linux 10.10, I want to use vnc on my another computer to access my desktop using remote access. When I navigate to Remote esktop Preferences. Your desktop is only reachable over the local network. Others can access your computer using the address localhost, no ip address. this is not working.
View 5 Replies
View Related
Jun 5, 2011
I was sitting watching a TV show on the internet (streaming from channel 4) and all of a sudden I get a request from an unknown IP address, outside of my local network attempting to access my ubuntu desktop, I obviously declined straight away and stupidly didn't take note of the IP I've checked my firewall settings and no ports are being forwarded, everything is as it should be. I am running Ubuntu 11.04, and a little bit concerned. As of now I have completely disabled remote desktop on my laptop.
View 1 Replies
View Related
