until recently, they did fstab mount quite happily, but now, they don't
the error I get is:
Code:
Mountall mount /media/win7 [1089] terminated with status 21
My fstab has not changed but here it is:
Code:
/dev/fd0 /media/floppy0 vfat noauto 0 0
UUID=da252821-a30d-415b-84cb-adca92be5b72 / ext4 defaults 0 1
[Code]....
Oh if I make the windows drive the first avail, then it boots just fine.
I know nothing about linux. But my friend says linux is good. So, I kept a copy of fedora core 10 i386. My fiend has a lot of movies about 100 in his ipod. So, I took it. It contains lot of viruses and I opened the ipod in windows but my windows has malfunctioned due to the virus. So, I have installed the fedora core 10 i386. I have some important information in the windows ntfs partitions. How do i mount those ntfs partitions.
View 8 Replies View RelatedI've got a Desktop System that Automounted Two NTFS partitions in F10 so I could declare them SAMBA Shares and have my other XP and Vista Machine Access them whether my dual boot machine ran XP or F10. Now I've switched to F11 and cannot get the NTFS Partitions to Automount at boot. If I browse with COMPUTER and let the system mount the NTFS partitions once it is running the mount command returns the following output:
[code]....
I believe I need to modify /etc/fstab but cannot get the syntax correct to save my life.
I need to my NTFS partitions mount automatically "at first" after login without any further intervention of user.
View 11 Replies View RelatedI've recently installed Arch on my main PC, and I decided to use Xfce4 desktop environment as appose to gnome that I use on my laptop. Firstly, I had to search round for an icon theme to get any of the icons working (they were all just papers with red crosses in them to start with), which I think is taking lightweight a bit too far :P, but just my opinion.Now i've got that sorted I turned to the problem of auto-mounting partitions. I'm having some trouble getting HAL to auto-mount my NTFS partitions which have my documents and music on. They are NTFS because i've got dual boot windows, and had windows before Archlinux so NTFS was the logical fs type to use. I think HAL is auto mounting dvd's etc. (can't be sure as I aren't in Arch at the minute)I can mount the NTFS partitions manually using:mount -t ntfs /dev/sda(number from 1 through 3) /mnt/sda(1 through 3)
However, I can only access this via root, so I carried out: mchmod scott.scott /mnt/sda(1-3)or something similar and that works fine, so I know they can be mounted successfully. I've tried auto-mounting them using fstab but can't seem to get this working, and I would rather not have fstab auto-mount them, I would rather let HAL sort all that out for me.I have checked that dbus, hal, consolekit and xf86-input-evdev are all installed (although im not sure what xf86-input-evdev does).Has anyone got any ideas why its not auto-mounting the NTFS partitions. My laptop mounts the NTFS windows partition fine using gnome.
I have installed Redhat Enterprise Linux Server 5 on my laptop. I have also installed Windows 7 Operating system on the laptop. I want to access windows 7 created ntfs partitons on RHEL 5 server. I tried installing the following rpm's on the rhel5 for accessing the ntfs partitiins.
1. fuse-2.7.4-8_12.el5.i386.rpm
2. fuse-devel-2.7.4-8_12.el5.i386.rpm
3. fuse-libs-2.7.4-8_12.el5.i386.rpm
4. fuse-ntfs-3g-2010.5.22-1.el5.rf.i386.rpm
[code]....
On a clean install of Arch linux I edited fstab to be like so :
Code:
/dev/disk/by-id/usb-Hitachi_HTS543232L9A300_9002555dd84a21024b000000-0:0-part1 /media/EXT ntfs-3g user,rw,uid=mas,gid=users,noauto 0 0
I tried ntfs and ntfs-3g but the result is the same I can mount root but I would like to be able to mount as a user. When I try to mount as a user I get
Code:
Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at [URL] Before installing ntfs-3g I was able to mount as a user but there was no rw permission. Any way to mount an ntfs partition as a user without suid as the message said?
Just installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org. freedesktop.hal.storage.mount-fixed auth_admin_keep_always <--
Anyone having an idea how I can fix this?
I am doing major deployment of opensuse 313 pcs from windows to opensuse. I am having a problem that I have to keep 2 ntfs partitions intact will deleting the partition that has windows. Now everything goes well, opensuse installs but the problem is that I cannot give user full rights to ntfs folders. I have used graphical file permission methods n terminal chown n chmod methos but still permissions revert back to root.
View 3 Replies View RelatedHow to mount ntfs partitions into red hat linux. I'm trying to mount but not mounted that
View 8 Replies View RelatedIs I issue this request on my sustem, does it link all storgae for the squid folder onto the sda2 partition? What happens to storage on the /var folder, which is already mounted on the sda3 partition?
mount /dev/sda2 /var/spool/squid
[root@]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda5 4.8G 1.5G 3.0G 34% /
[code]....
I have ubuntu 10.04 LTS installed. I want to mount a windows partition. I can, of course, use fstab. However, I open nautilus and click on the windows partition in the placed panel. How do I use mount (or any other command) to emulate this?
View 6 Replies View RelatedI have Debian Squeeze installed. I have 3 different HDDs, one of them is SATA, the other 2 are IDE, on one of which I have the distro installed.
How do I mount the other 2 partitions? I see them in "Places" but when I click on them I get an error message "Unable to Mount <The name of the volume> Can not get volume.fstype.alternative".
I can see both volumes in /dev/ntfs. I tried doing
Code:
how can it be done?
I'm running 64 bit linux mint 9.
What are the necessary packages for mounting NTFS partition on CentOS? i tried installing fuse-ntfs-3g but got a result saying its not available.
View 1 Replies View RelatedI have installed ubuntu on my notebook, and there are 4 partitons in the hdd, all are NTFS, only one is ext4.
the problem is i deleted some hidden folders(in ubuntu which are not hidden, such as recyclebin and file information table folders) in ntfs partitions, now i need to reinstall the windows 7 back, i have a doubt that even windows will ever recognize those partitions again?
i have a window xp////on the same machine i installed linux mint9.....mostly i am using linux mint9.....i want to operate my NTFS (Window XP) Partitions from linux mint9..
View 9 Replies View RelatedI have 17 gb free in two ntfs partitions. What I'm going to do is.,.
boot 139mb ext4
root 9gb ext4
swap 1200mb swap
home 7gb ext4
Is it ^ ok ? Should I change anything ?
Whenever I try to install W7 it says the partitions aren't NTFS.My question, how do you change the partitions to NTFS in Kubuntu?
View 3 Replies View RelatedI have an Ubuntu 10.04 box that accesses NTFS drives along with ext4. Recently, I switched from ntfs-3g to Paragon NTFS driver, which is proprietary, but free of charge. It feels quite faster on my internal drives. Now I have a problem with external eSATA NTFS drive. When it is detected, I mount it via Nautilus GUI, but it gets mounted with the ntfs-3g driver. (It can be mounted via command line with the Paragon driver, but this is less convenient. How can I configure my system (is it Gnome or some system-wide configuration ?) to mount all NTFS drives with the Paragon driver?
View 2 Replies View RelatedI have installed three flavors of linux on vmware
1.rhel5
2.centos 5.5
3.fedora 14
and also install centos 5.5 on a separate hard disk (not on vwware).
I want to mount my pen drive on linux which is ntfs. I have tried a lot on rhel5 only. Please tell whether it is possible mount ntfs on any distributions I have mentioned above? I have already installed fuse, fuse-devel, fuse libs, ntfs-3g, ntfs-3g libs on rhel5. But I still got error:
"fatal : module fuse not found"
"ntfs unknown file system"
I need to mount NTFS drive on RHEL 5.1. I tried NTFS-3g & FUSE as well, but still getting
FATAL: Module fuse not found error.
Actually i've packages to show my ntfs partitions on my red hat linux but i 'm unable to install these packages. how can i install the packages
View 2 Replies View Relatedi have dual OS in my hard disk. win xp and rhel5. i used use ntfs partition too while working in linux. There is no problem until i enable selinux. When i enabled that, its giving some error at startup and left the partition unmounted. But manually i can mount after logged in. But i need it at the startup itself. How to solve this.i am installed dkms* dkms-fuse* fuse* and fuse-ntfs-3g* rpms to use the ntfs partitions.
View 4 Replies View RelatedI have a windows box running w2003 server on 1 volume with 2x ntfs basic partitions. c: = the windows bit, d: = the data bit for user data.I have cloned (clonezilla) the volume to another and deleted the data (d bit and want to extend the c: into the freed space.I'm booted from a partedmagicv5 cd and using gparted to attempt this.I can't see a way to do this with gparted but then, I could be thick. Maybe I clone off reformat and copy back?Is there a better way or even is this the correct forum (please don't refer me to Microsoft website:-) for this type of question?This is a test box so not worried about breaking it, but the test is to try to solve a live problem at a school I support which is running out of hd space.
View 3 Replies View RelatedI am trying to setup fstab to automatically mount my NTFS partitions. I have used various Mount managers to create the entries in fstab. The fstab seems fine, but when mounting at boot or even via Nautilus I get the error message that I do not have permission to mount the disk.
1) Can this permission be set in the fstab file? If so what is the syntax of the fstab entry?
2) If not, is there a tool i.e. GUI to set the mount permissions?
I have both windows and ubuntu 11.04. In ubuntu I can mount then edit NTFS drive without being asked for permission. It's not safe that way because anyone using my computer can edit my windows files. How do I make it ask for password when mounting NTFS?
View 2 Replies View RelatedI have just managed to install OpenSuSE 11.3.When I try to access a NTFS partition (holding my .MP3s) I get the error message.There is no application installed that can open files of the type block device (inode/blockdevice).Do you want to install one? Attempting to install one doesn't seem to lead anywhere othe than the same sequence. I used to be able to read NTFS partitions with 11.2 - what has changed?
View 6 Replies View RelatedI am using jaunty. I have it installed in a 80 GB ext3 HDD. (This is sdb) I have another 500 GB. Its NTFS. (This is sda) It has 3 partitions. Download, Movies, Dump. They are probably sda1, sda2 and sda3 respectively. Few days ago when I was using intrepid, all three partitions were showing in the Places menu. But I was being able to mount Movies and Dump. Not the Download one. It was continuously saying 'unable to mount'. Now, after fresh installation of jaunty (not upgraded from intrepid) only Download partition is showing in the Places menu. There is no option for the other two partitions.
View 9 Replies View RelatedI am trying to install Debian in an old laptop. Of course, in this laptop there is windows installed and I want to respect it. My plan is to install Debian in a spare drive.Before installing Debian, I want to check what is inside each drive. In order to do that, I am trying to use the Debian installer CD. Then start an admin shell, mount the drives in read-only mode, and check their contents.
But when I run the command:
# mount -r -t ntfs /dev/sda3 /mnt/windows
I get the following response:
mount: mounting /dev/sda3 on /mnt/windows/ failed: No such device