Fedora :: Mounting A Weird Filesystem?
Nov 23, 2009
Following a slight dose of vandalism, I have invested in a security camera system.It is basically a hard drive in a box which connects to a couple of cameras.There is also a USB lead to connect it to a PC, and some software that enables Windows to look at the recordings (I can't get it to work on WINE).I was hoping to simply bypass that, and just look at the drive directly, but it seems from here that the disk "doesn't contain a valid partition table".Obviously, the box thinks it has a valid partition table, else it would not work.I was quite surprised: I had assumed the box would have some kind of cut down Linux based system, but if that were the case, you would expect it to use a recognisable filesystem.
View 6 Replies
ADVERTISEMENT
Jun 4, 2010
i am getting weird results after mounting the /home directory from the server. seems like the client sees the ldapuser and it's directory from the server side.. /home/ldapuser. but it's pulling the "blank" user as it's permission. blank is the actual user on the client side. any ideas why?
server side:
[root@localhost ~]# showmount -e
Export list for localhost.localdomain:
[code]...
View 2 Replies
View Related
Mar 1, 2010
Is it possiable to mount a DVD-RW disk as a RW filesystem so I can do things like ...
mkdir /dev/dvd/mydir
cp ~/.profile /dev/dvd
ls -la /dev/dvd
I would like to use it, even create a partition on it using cfdisk or somthing. Can I do that ? If so, what is the mount command or tools I need ?
View 2 Replies
View Related
Jul 7, 2011
I am new to Linux platform and have installed RHEL 6 on my computer. I have gone through different posts on websites regarding how to mount windows drive on to the Linux file system.Here are few results of my trial where results are slightly overwhelming for a guy like me:
1. Mounting NTFS file system using mount commandAs a su-)
" $mount -t ntfs /dev/sda1 /media/MyFilesystem"
Output: error: unrecognised file system ntfs
2. I followed step by step instructions of installing Fuse and ntfs-3g_ntfsprogs but had no luck:
while using this command for the installation of for FUSE-0.9(which I guess prepares files for installation) I am getting this error :
" Command use: ./configure --exec-prefix=/; make;make install"
Error: "Checking Kernel source directory.../usr.src/kernels/2.6.32-71.e16.x86_64...Checking Kernel source version.......Not found "
Configure error: cannot determine the version of the Linux kernel source.Please configure the kernel before running this script.
Woooh , as u can see my Linux version is mentioned in that message so can anyone lemme know whether this issue is because of the incompatibility of Fuse with my version of Linux or am I suppose to make some changes in the command itself.
View 7 Replies
View Related
Mar 28, 2011
I just updated Fedora 14 with the updates it downloaded and I am now stuck with the error.
View 10 Replies
View Related
Sep 13, 2010
I have an XFS filesystem (not my root filesystem) that is not mounting.
We had a power failure over the weekend. All but one of our XFS mounts is comming up. Its a large mount (2TB) and I am not seeing errors per se...
But after attempting to mount it, it has been 4 hours and all we see in either dmesg output or in the messages file from the kernel is:
Our mount process is dead and I don't see any disk i/o going on. Am I missing something here on this?
I rebooted the box once earlier and was able mount read-only with norecovery...
I tried xfs_check and it also produced a dead "xfs_df -i -p xfs_check -c check /dev/sdd1"
View 5 Replies
View Related
May 18, 2011
I am very new to linux, and I have a question regarding the filesystem check (fsck). The power recently went out and when I tried to restart linux the following error appears:
*/dev/sda1 contains file system w/errors, check forced it then goes on to say..
*An error occured during the file system check. Dropping you to a shell; the system will reboot when you leave the shell. Give root password for maintenance (or type Control-D to continue) I wasn't sure what to do, but checked some other online forums and they suggested running fsck manually - so I typed in the root password - and used the command, "fsck -A -V ; echo == $? ==" it then gave the following message
*WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage
*Would you like to continue (y/n)
Again, I wasn't sure what to do so i just checked no. I then manually turned off the computer and was prompted at the beginning to press Alt-3. I was brought to another screen and it informed me one of the drives was degraded and suggested rebuilding the array. I tried doing this, but it still brings me back to the original error of, "/dev/sda1 contains file system w/errors, check forced," and the process continues.
Also, when I tried to rebuild the array, I didn't backup any of the data on our home directory before doing this (which was probably a big mistake). After being prompted to type the root password, I was able to give the ls command and look at all the directories...the home directory where our data was stored was empty and I am afraid I may have lost some information. Is there a possibility that data was lost when I was trying to rebuild using the old drives?
View 2 Replies
View Related
Apr 16, 2010
I am using Ubuntu 9.10 (along with Win xp). I have to authenticate everytime I mount filesystem (My d: , e: drives in windows). Or to connect to the internet (I use mobile broadband) I have to authenticate, also if I have to install something from synaptics I have to authenticate. I know this is good for security but I am the only person using my computer , so is there any way out of this authentication business.
View 6 Replies
View Related
Jan 20, 2010
I have a external HDD with eSATA and USB connectors available. I want to use this HDD to store my backups. The HDD should be encrypted (my main system is as well).
So here is what I did so far:
1) I used the following code to create the encrypted LUKS partition with EXT3 Filesystem:
Code:
cryptsetup -c aes-xts-plain -s 512 luksFormat /dev/sdb1
cryptsetup luksOpen /dev/sdb1 luks
mkfs.ext3 /dev/mapper/luks
The system always hang when I executed the "mkfs.ext3..." command, so I switched the HDD from eSATA to USB and then it worked fine.
2) When I switched on the ext. HDD the first time, the drive was recognized automatically and Nautilus asked for the password. I typed it in as checked the checkbox to remember the password in the future. For the backup I use a nice script that I found in another forum, where I can define a mountpoint and then the script will check for previous backups and only make a incremental backup based of the latest version. The script also mounts the drive automatically. In order to always have the same mountpoint, I want to make an entry in the /etc/fstab using the UUID of the ext. HDD.
Whatever I tried, it doesn't work. What am I doing wrong? Here is my current /etc/fstab
Code:
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/mapper/ubuntu-root during installation
UUID=2ea47421-73ce-4c66-9606-8a1db81ae640 / ext3 relatime,errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=dbdeb793-1d4e-43ea-8986-7b37fdbc9674 /boot ext3 relatime 0 2
# /home was on /dev/mapper/ubuntu-home during installation
UUID=42702091-83e6-43eb-aad1-108f43eedf9d /home ext3 relatime 0 2
# swap was on /dev/mapper/ubuntu-swap during installation
UUID=e225bcf9-908b-4226-a963-6b02ee658df1 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
# Eintrag wegen iPhone
none /proc/bus/usb usbfs devgid=125,devmode=666,nodev,nosuid,noexec 0 0
# external HDD
UUID=913977f7-8fa6-416f-af79-b5f913b68f53 /media/backup-hdd ext3 noauto,users 0 0
I made the "none /proc/bus/usb..." entry because it was recommended to ensure correct behaviour of the iPhone. Not sure if I need it though.
I created the mountpoint with this command:
Code:
sudo mkdir /media/backup-hdd
Now it seems the mountpoints owner is not root - strange right?
Code:
2 4 drwxr-xr-x 3 michael michael 4096 2010-01-15 02:45 backup-hdd
How should I mount this drive correctly? It will be automounted as every USB device, but that should not be the case. I want the script to mount and unmount the drive.
View 2 Replies
View Related
Sep 6, 2010
I've just got a new laptop with 4GB RAM available, in order to fully utilize the available memory I'm going to install Ubuntu Lucid Lynx 64bit, but when I boot with Live CD, I always get the following errors:
Code:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Input/output error
Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
View 1 Replies
View Related
Mar 6, 2010
I need to examine a hard drive that came from another system running Ubunut Server (not sure what version). I know the drive has LVM on it, so as far as I understand that means the drive will be treated as EXT4 for mounting. I can't boot from the actual disk, but I have used a IDE to USB connector to make a binary copy of the drive, which I've mounted as a loopback device. However, when I try to mount the loopback device properly, I get this:
root@~je:/# mount -o ro -t ext4 /dev/loop0 /mnt
mount: wrong fs type, bad option, bad superblock on /dev/loop0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I tried using -t ext4dev too, but that just gives an unknown filesystem error. The file I've got mounting in /dev/loop0 is a .dd file, created by imaging the drive using dcfldd on the server drive while it was mounted (as /dev/sdb). System I'm working on is running Ubuntu 9.10. All I need is to be able to mount the server drive so I can traverse the file directories, there's a few things I need to check on it. If needed I can dispense with the whole loopback setup and just directly connect the server hard drive again using the IDE to USB cable, but I'd rather not do that; it's imperative that the drive doesn't get altered, or at least as little as possible.
View 5 Replies
View Related
Oct 26, 2009
I was looking at the root filesystem folder for mounting a device when I noticed extra folders. I'm using an encrypted filesystem so I'm not sure if it's that, a break in or the default Red Hat layout. I searched these forums and Google to no avail on extra folders. The root system contains the following:
bin {fda00e13-8c62-4f63-9d19-d168115b11ca} media opt selinux usr
boot home misc proc srv var
dev lib mnt root sys
etc lost+found net sbin tmp
View 3 Replies
View Related
Apr 6, 2010
I have a number of diskless hosts which are to bootth PXE and mount their root filesystem on an NFS share. Most of the NFS share will be common to to all of the diskless hosts. No problem with that part.I also need part of the NFS shared filesystem to be unique to each individual host. The only difference between the hosts is the ethernet MAC. I use it in the DHCP server to key a specific unique IP to each host. I would like to be able to use either the MAC, or the IP, or any other unique identifier that can be derived very early in the boot process to access a filesystem or directory that is unique to each diskless host.
I need/want to do this because I need/want to isolate all of the system maintenance to one small part of the boot host. Modifying the hardware (these are VME CPUs) in any way is not an option; they must be field swappable, with all maintenance isolated to the boot host(s).I know I could run ifconfig and parse its output to derive an IP &/or MAC, but that seems a bit kludgey and fragile. The DHCP server is presently assigning IPs. I know I can arrange to pass a unique option value via the DHCP server, but don't know if or how this can be retrieved on the diskless nodes. I am presently passing the 'root=' kernel argument from the bootloader, but I don't think there is any way to pass other filesystem information using that mechanism.
I know I can pass some kernel arguments from the bootloader, but there doesn't seem to be any generic message that can be retrieved in userspace as part of the boot process. I've scanned around in the /proc filesystem, looking for the IP or anything else that seems to uniquely identify the host, but don't see anything there, either.The init process has not yet been cast in stone, but is very likely to be a BusyBox built-in
View 5 Replies
View Related
Jun 18, 2010
my friend using XP and it was closed because he didnt activate it . he want to try Linux , i adviced him to use UBUNTU 10.10, but after we order the boot we got a loading screen for ubuntu then this error appeared
Quote: busybox v1.15.3 ( ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) enter 'help' for a list of built-in commands. (initramfs) stdin :I/O error mount: mounting /dev/loop0 on //filesystem.squashfs faild: no such device can not mount /dev/loop0 (/cdrom/casper filesystem.squashfs) on //filesystem.squashfs udevd[75]: worker [171] unexpectedly returned with status 0x0100 udevd[75]: worker [171] failed while handling ' /devices/virtual/block/loop0'
i change the cd to another one but an error was changed to :.............
View 7 Replies
View Related
Nov 2, 2010
So i insert the ubuntu 10.10 in the dvd and boot it. The menu comes up and i choose to install ubuntu. After that it shows some black screens and this error:
(initramfs)mount:mounting/dev/loop0 on//filesystem.squashfs failed: Input/output error cannot mount /dev/loop0(/cdrom/casper/filesystem.squashfs)on//filesystem.squashfs
The disc aint scratched. I tried installing from Windows but i got another error.
And for some odd reason Ic ant make a removable startup disk:
View 2 Replies
View Related
Nov 7, 2010
my friend using XP and it was closed because he didnt activate it . he want to try Linux , i adviced him to use UBUNTU 10.10 ,but after we order the boot we got a loading screen for ubuntu then this error appeared
[code]...
also , the labtop cannot boot from usb coz no option for that in BIOS. what can i do to solve each problems?
View 2 Replies
View Related
Feb 11, 2011
So I just turned my computer on and it was beeping rapidly, and it would stop if I hit "Enter". Also this came on my screen: Cannot set Fray", something like that. It boots fine..just what is that?
View 1 Replies
View Related
Aug 27, 2010
an idea what might be wrong with fs 0x06 FAT16? I have a mobile, Sony Ericsson K750i, which was mounted in previous distributions without problems (up to 11.1). Now I use 11.2 and I am unable to mount it. I tried to do it via yast, but it says "non-existing or uknokwn file system" even it was recognized as 0x06 FAT16. I read that this fs is outdated, however still supported.
View 5 Replies
View Related
Feb 27, 2011
I was recently using OO-calc to try to organize some table-based data to clean it up (delete unneeded columns) before converting it to a database insert statement. While doing this, at one point, open office changed the grid width and height to being really small. I changed it back to normal, but now even the font is really small, but the font-size is set to 10 px. I can't figure out (a) what happened, and (b) how to put it back to normal. I'll attach 2 images to make it more clear about what it's actually doing...
View 4 Replies
View Related
Jul 14, 2010
I am setting up a server and trying to access its partition over the nfs on a client machine. Our server has 4 1.5TB disks and the idea was to make a RAID 5 out of it.Now here is the problem:When I used only 1 disk that is nfs partition was of 1.5TB, I got fine speed(30MBps), but with multiple disks whether I am making 3TB (Raid 10) or 4.5TB (Raid 5), I get a really poor speed of 5-6MBps. I/O just waits.But for all above cases, disk I/O locally works fine.Does anyone knows any NFS limitation that is causing this problem?
View 4 Replies
View Related
Mar 26, 2010
I have FedoraCore 12 x86 DVD already installed since the last weekend, no Internet connection available yet for such PC for lack of time to work in such PC. Since two days ago my video resolution has a weird behavior (I only did one configuration change about pass 800x600 to 1024x768) and since there I never did other change video resolution, and with the new configuration I have been using Linux without problems. Now two days ago When I start up the PC and arrive to the login screen I can see clearly that the resolution for my all graphical interface can be 800x600.
After to enter to my account I see the follow behavior, that consist in load the graphical environment and changing to 1024x768 resolution. See my Photo01.png, after that the pointer of my mouse (black row) never is show, I must do something like Photo02.png to see the black row. My only solution by the moment is arrive to the configuration resolution (see Photo03.png) and only do click in Apply button to refresh all the environment and see the desired black row (pointer), see Photo04.png, but I must do this each time when I start up the PC.
View 8 Replies
View Related
May 31, 2010
The installation was fine, after all the updates were done, I've installed Mesa-dri-experimental and then Gnome-shell.After I activated Gnome-Shell windows have some weird aspect (see image below )I've a acer 8930g laptop with a geforce 9600m gt.Do you have any Idea of what's wrong?I've also noticed that this problem disappear as soon I apply a theme with non rounded windows ( like Crux )
View 1 Replies
View Related
Nov 12, 2009
I've only seen this occur in cases where I'm viewing a GPG-signed message and a line wraps. A plus sign appears at the beginning of the next line. Is this something I can get rid of?
View 10 Replies
View Related
Nov 29, 2009
I've been installing/tweaking F12, and I've found something that I can't say I've ever seen or expected to find before: the contents of my ~/Documents folder has lost its permissions and ownership info. I restored it from a backup last night/this morning, and I've rebooted a few times since then. Other folders from the backup are OK, just Documents.I don't know what my options are. I could try to blow it away and restore it, but that doesn't answer what caused it. If there's a "relabel" or something, that might help... though I've never had to do it before. Could it be that after these two-and-some-change years, my hard drive is giving out? Good thing I have a recent backup... but it'd be a shame to lose all my work getting F12 to work again.
View 4 Replies
View Related
Aug 23, 2011
I have a Nvidia 275GTX and I installed the nvidia drivers via RPM fusion and blacklisted Nouveau as instructed by a guide online that I see matches the one on these forums. When my system boots up now instead of having the cool blue screen with the fedora logo in the middle that loads up I get a black screen with a bar at the bottom that says Fedora 15 to the right and the bar fills up blue and white. It looks like 8 bit Nintendo. Did I do something wrong? Is there a way to get the nice Fedora 15 load screen back?
View 4 Replies
View Related
Mar 27, 2010
When I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
View 6 Replies
View Related
Mar 11, 2011
I am trying to mount a file image, like this
mount -o loop /tmp/apps.img /media/apps
But I get the following:
mount: you must specify the filesystem type
I try ext3:
mount -o loop /tmp/apps.img /media/apps -t ext3
dmesg says:
error: can't find ext3 filesystem on dev loop6.
I've also tried ext2, vfat etc. How can I detect the filesystem type of apps.img?
View 2 Replies
View Related
Jul 9, 2010
I have a following problem: Recently my drive with Ubuntu 9.4 has mysteriously stopped working, i.e. when I switch the computer on it informs me that GRUB didn't find the filesystem. Well, I suppose it happens.
First, I though it was due to the drive dying, but I popped it in an external enclosure and HDTune told me the drive was fine. Wanting to recover the files on the drive before reinstalling I first tried to mount it in said external enclosure under Windows (I have Win Ext2 driver installed which used to work just fine). This time, however, drive gets assigned a letter but upon opening it Windows popped up an error saying that the drive was not formatted and whether I would like to format it then.
Unfazed by this streak of failures I tried to mount it under Linux but, alas, to no avail. I might have tried every single -t operator under mount command but it still won't budge and let me mount.
View 5 Replies
View Related
Mar 24, 2010
I've had a look at some similar threads but as I'm very new to linux they're already a bit technical for me. Sorry, this calls for someone with patience. I gather from other threads that disconnecting an external drive without unmounting is a no-no, and this seems to be the likely cause. Now the disk is read only and I'm unable to change any settings through the usual control panel on ubuntu. I'm just not familiar with the terminal instructions. I tried to cut and past a few command lines from other threads but I got some warnings that proceding could damage data. Like this one: WARNING! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage.
View 5 Replies
View Related
Apr 30, 2010
Quote:
an error occurred while mounting /proc/bus/usb - press s to skip mounting or M for manual recovery
I'm getting this error while booting.
View 9 Replies
View Related
