I am trying to mount 3 NTFS partitions, but they aren't showing up in the /dev directory. If I fdisk the drive, the partition shows up, but nothing in /dev...
Here is the output of fdisk -l as well as the results of my attempt to mount the partition.
Just installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org. freedesktop.hal.storage.mount-fixed auth_admin_keep_always <--
Anyone having an idea how I can fix this?
I have successfully mounted the NTFS partition containing win7 via Ubuntu.
I followed these 3 steps:
Code:
Now I have unmounted the partition and want to remount it again except this time so that it is mounted as Read-Only.
I am running 11.4 from a thumb drive,mainly because something is fishy with my main hard drive, but installation is not my reason for this thread (though I think fixing one problem will remedy the other). My winbloze install is short stroked with ~50gb for OS and ~200gb for media storage. I have no problem accessing the storage from windows, but I am unable to mount the storage partition under Ubuntu. I get the following error:
Error mounting: mount exited with exit code 14: Hibernated non-system partition, refused to mount.
Failed to mount '/dev/sda2': Operation not permitted
The NTFS partition is hibernated. Please resume and shutdown Windows properly, or mount the volume read-only with the 'ro' mount option, or
mount the volume read-write with the 'remove_hiberfile' mount option.
For example type on the command line:
mount -t ntfs-3g -o remove_hiberfile /dev/sda2 /media/Laptop Storage
When I run that command, I get this:
su: invalid option -- 't'
How to mount ntfs partitions into red hat linux. I'm trying to mount but not mounted that
View 8 Replies View RelatedIs it possible to use the 'discard' option when mounting an ntfs-partition? Because I'm buying an ssd and I intend to dual-boot windows xp (which doesn't support TRIM) and Ubuntu 10.10 (which does).
View 3 Replies View Relatedhow can it be done?
I'm running 64 bit linux mint 9.
What are the necessary packages for mounting NTFS partition on CentOS? i tried installing fuse-ntfs-3g but got a result saying its not available.
View 1 Replies View RelatedI want to mount ntfs partition in rhel5 I searched a lot in google and finally understood that these three RPMS are must to mount ntfs partition in rhel5. My kernel version vmlinuz-2.6.18-53.el5. As per instructions in the net I downloaded these rpmms
fuse-2.6.5-1.el5.rf.i386.rpm
fuse-ntfs-3g-1.1030-1.el5.rf.i386.rpm
fuse-kmdl-2.6.18-53.el5-2.7.1-6_7.el5.i686.rpm
First and second rpms are installed successfully but third is showing errors saying
rpm -ivh fuse-kmdl-2.6.18-53.el5-2.7.1-6_7.el5.i686.rpm
Failed dependency
/boot/vmlinuz-2.6.18-53.el5 is needed by fuse-kmdl-2.6.18-53.el5-2.7.1-6_7.el5.i686.rpm
But I copied vmlinuz-2.6.18-53.el5 in /boot even though it is saying dependencies missing
#rpm -qa | grep kernel
kernel-headers-2.6.18-53.el5
kernel-xen-2.6.18-53.el5.
#modprobe fuse
FATAL: module fuse not found
#uname -a
Linux server2.vth.com 2.6.18-53.el5xen.
My query is that why am unable to install the kernel module. Currently running kernel-xen-2.6.18-53.el5. I tried in another system above three rpms were installed successfully without any errors. What was the reason for my system.
I come from ubuntu, and, although they are all linux distros, they differ in a lot of things. Well, I just install the OS and I have a 1 TB drive for storage formatted in NTFS, I identified the device with fdisk -l, but the problem is Centos doesn't understand ntfs partition out of the box. Is there any package I need to install. I tried yum install ntfs-3g, but got an error: "no such package in repos,"
View 8 Replies View Relatedlet's say this system has 3 hard drives. Drive #1 and #2 are RAID 0 and Windows7 lives there. It is a hardware RAID, not software.
On Drive #3 Ubuntu has been installed using WUBI - it boots up and works okay - but it does not see the RAID array.
Do I just need a linux driver to be able to see & mount my "Windows" RAID0 array? Or is this even possible? Can anyone point me in the right direction?
I have a dual-boot setup with winXP and openSUSE 11.2. I have both XP and SUSE partitions on a 160g HDD and then a Hardware RAID 1 array of 2 320g HDDs. The RAID arrray contains all my media/data files on an NTFS partition. For some reason SUSE shows both individual 320g disks mounted in the file system, but not the RAID array. If I attempt to browse either of the disks, I get an error and can't view them. How do I mount the RAID NTFS partition?
View 2 Replies View RelatedI am trying to install Debian in an old laptop. Of course, in this laptop there is windows installed and I want to respect it. My plan is to install Debian in a spare drive.Before installing Debian, I want to check what is inside each drive. In order to do that, I am trying to use the Debian installer CD. Then start an admin shell, mount the drives in read-only mode, and check their contents.
But when I run the command:
# mount -r -t ntfs /dev/sda3 /mnt/windows
I get the following response:
mount: mounting /dev/sda3 on /mnt/windows/ failed: No such device
I was attempting to format a flash drive, and well, used the wrong sdX device. I've run DiskInternals Partition Recovery tool, and all my files are still there (you have to pay $139 to have it restore the files). Is there any way using tools in linux to restore the ntfs partition/files? It was a single disk with the partition taking the entire drive. I've tried mounting it with the -t option, but it says invalid ntfs signature. Man, two lessons the hard way, make sure you backup (duh) and be careful what you type as root.
View 8 Replies View RelatedOn a clean install of Arch linux I edited fstab to be like so :
Code:
/dev/disk/by-id/usb-Hitachi_HTS543232L9A300_9002555dd84a21024b000000-0:0-part1 /media/EXT ntfs-3g user,rw,uid=mas,gid=users,noauto 0 0
I tried ntfs and ntfs-3g but the result is the same I can mount root but I would like to be able to mount as a user. When I try to mount as a user I get
Code:
Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at [URL] Before installing ntfs-3g I was able to mount as a user but there was no rw permission. Any way to mount an ntfs partition as a user without suid as the message said?
About dual boot system with winxp and lenny.
Storage information:
1st primary:SG 160G ATA 100
1st secondary:WD 160 ATA 133
SATA:WD 1000
2nd primary:DVD
2nd secondary:DVD±RW
Winxp in 1st primary.I did a fresh install of lenny on 1st secondary.
info about lenny setup:
1.Partition list:/boot,/,/home,swap
2.Every partition is XFS except swap.
At the end of installion,lenny installed grub on (hd0) that is 1st primary.
Everything seems OK.Lenny runs OK.
But when I switch back to windows xp,the diskmgmt can not detect hdd's info and the system meets a problem of shutting down.
After many times of trying.
I solved the problem by the following way.
1.Boot with windows xp's install CD and use fixmbr on (hd0).
2.Boot with lenny's install DVD , do a grub>root (1,0)>setup (hd1)
After that,edit /boot/grub/menu.lst and change (hd0,0) to (hd1,0) and also (hd1,0) to (hd0,0).
3.Reboot and Press F8 for a boot menu then I can select which disk to boot.
windows boot from 1st primary's mbr,lenny boot from lenny's grub.
The problem is caused by a bug between GRUB and windows' mbr and maybe more about GRUB and XFS.
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
Having using full-time on Windows (as a "trip down memory lane") I decided that Ubuntu is way better. Now, it won't resize my full-drive NTFS partition. I can move it on the drive, but I can not resize it.
View 3 Replies View RelatedI have a laptop with 500GB of hardisk. Here is the picture of my partition: sda1 and sda2 was one partition before, then I resize it to make some room for Windows XP installation. sda6 was sda5 before I shrink sda1. and the unallocated space was sda6 before. I really need some help. How to repair the unallocated partition so I can use it without losing any file in it? I have so much important file in the unallocated partition.
View 6 Replies View Relatedyesterday I did an upgrade from 9.10 to 10.04 and this time it was a mixed experience, most thing worked, but some things like gdm, sound and other setting need(ed) corrections to work again (as in 9.10).In 9.10 I setup my system so that the second partition (data) was only manually mounted after asking for my password.
After updating 10.04 I asking me at every bootup whether I want to manually mount or skip the mounting. And when I manually mount the partition I don't need any password anymore.Why did the upgrade change my setting?Not being an linux-expert, having not documented how I have done the previous setup and being unlucky with google, I could use some pointers in the right direction.Even if I sound not so happy at the moment I really appreciate the good work that went into ubuntu. After setting up my system after each new installation or upgrade I enjoyed a carefree time with ubuntu (where I forget everything I need to setup my system because it just works as it should).
I am currently downloading Ubuntu from a torrent at: [URL]. The file will be Ubuntu-9.10-alternate-i386.iso at 689Mb. I have a dial-up connection so the download is taking a long time to complete. I understand this to be a disk image file. I am using Windows XP v5.1 (Build 2600.xpsp_sp3_gdr.090804-1435 : Service Pack 3) as the operating system on my Emachine. This computer supports booting from a USB drive in the BIOS. I also have a DVD/CD +R+W drive to burn a disk image to if needed.
In short I want to install Ubuntu on a bootable partition of a NTFS external USB hard drive.
The external hard drive is a Western Digital 320Gb USB 2.0 that came formatted as NTFS.
I plan to use "EASEUS Partition Master 4.1.1 Home Edition" to create a ~40Gb NTFS partition on this drive for the Ubuntu install and any future Linux applications that I will acquire. The larger partition will be used for Windows backup storage and as a portable drive with a number of portable windows applications.
1) Should I use another file system other than NTFS? FAT? FAT32? Something Linux?
2) What steps are required to install Ubuntu on the partition?
In addition I would like to try to run Ubuntu inside a "shell" inside Windows XP from time to time. I have software (VMware player v3.0.0-197124) that I think can accomplish this. I have the following security and utility programs running:
WinPatrol (real-time)
SpyWare Terminator (scheduled scans)
WinMem Optimizer (real-time)
ThreatFire (real-time)
PC Tools FireWall Plus (real-time)
Avast Antivirus (real-time)
3) Are any of these programs known to interfere with the installation of Ubuntu or with Ubuntu running in a shell?
I used gparted to create 60GB free space which I then formatted as ntfs. However,when I go to install XP I get the blue screen of death.I know the XP installation disc is OK.The ntfs partition (sda3) is after the ext4 partition (sda1) - could this be the source of the problem?
View 9 Replies View RelatedI used Windows XP's encryption to encrypt some folders on an NTFS Hard Drive.Upon mounting this drive in ubuntu, I can see all folders, and all file names, but I cannot open the contents of the encrypted files, getting "Permission Denied" despite all permissions being -rwxrwxrwx.Is there a way to open these from linux? I know the Windows XP login / encryption password.
View 3 Replies View RelatedSo, my GParted (Ubuntu) won't create an NTFS partition (the option is greyed out). I'm trying to create an NTFS partition to allow for a Windows 7/Ubuntu dual-boot. Everywhere I check, they suggest either creating the NTFS partition in GParted BEFORE installing Windows OR leaving it "unallocated" with the Linux partition after it.
I have tried both now, with two results:
1) GParted can't create an NTFS partition within Ubuntu 9.10.
2) On the other hand, the Windows 7 Installer says that Windows can not create a partition or find a partition when I attempt to select the "unallocated" portion.
I am doing major deployment of opensuse 313 pcs from windows to opensuse. I am having a problem that I have to keep 2 ntfs partitions intact will deleting the partition that has windows. Now everything goes well, opensuse installs but the problem is that I cannot give user full rights to ntfs folders. I have used graphical file permission methods n terminal chown n chmod methos but still permissions revert back to root.
View 3 Replies View RelatedI am trying to restore an NTFS partition from a backup and I need the new drive to have the old (dead) drive's UUID (which I recorded).I really really really cannot use the option of changing fstab to mount using a new UUID, for this case I need the old UUID that existed on the other drive.Is there some ntfs equivalent of tune2fs that'll let me change the UUID on an ntfs partition?
View 4 Replies View RelatedI am trying To install debian 6 with xp in dual boot after a crash during update version 10.10 to 11.04 (not enought space but no information about that ....so it's moment for change something ..) so i found unetbootin like the more simple way for my "ecodieselesecondhanddust pc" with download only iso image : debian-6.0.1a-i386-xfce+lxde-CD-1.iso without use any bash command ... after launch the usb key everything work well , except during the manual partition where i want use xp partition (ntfs) and not others choices proposed like fat ,btrfs,jfs,xfs,ex2,3 or 4..! how i can use NTFS choice and to be sure to not delete my xp partition with an other choice not appopriate to ntfs ? it's seems to add a kernel module with modprobe in bash , but i have not idea with which option exactly ?
View 14 Replies View Related[URL] I used testdisk as the replies suggested recovered all my linux partition including my 2 linux distros and boot partitions, but now my windows 7 appeared as unallocated space, which is very ironic, I fixed my last problem only to have situation reversed. I recovered the mbr record from my boot partition, but because that record dose not include the ntfs partition, that partition appears as unallocated space. so how can I make that ntfs partition recognized again so I can update grub and boot to my windows 7 partition? Please help me out, I have had this partition stuck in my computer for a while doing nothing...
View 2 Replies View RelatedI am not been able to re size the partition. Can anyone please help. I tried to re size and install ubuntu 10.04 on two machines but it did not work. Details are HP mini ( windows xp pre installed with new ntfs partition). Lenovo thinkpad ( windows vista pre installed).Is new windows partition is non - re sizable?
View 7 Replies View RelatedI am about to do a clean install of Ubuntu 10.04 and I want to have my /home on a separate ntfs partition so that it can be accessed by windows 7. I know that i can move it after the install but i wold rather not go through all the problems of moving it.
View 5 Replies View Related
