Red Hat / Fedora :: How To Recover Entry After Installation Of WindowsXP In Another Partition?
Jul 26, 2009
After installation of Windows XP in the disk where Linux was installed in another partition the GRUB menu allowing to choose operation system to load dissapeared. This menu previously appeared right after switching the computer on. But after installation of Windows in the partition intended for it only WindowsXP is loaded automatically once I switch on my computer. But switching it on with Linux rescure cd-disk results in loading my ordinary Linux from hard drive. This shows that Linux is not destroyed at the loading of Windows, but just made unreachable. Possibly installation program for Windows has destroyed GRUB or some of its files. Does somebody know how to restore normal functioning of GRUB?
Details:
I am using Scientific Linux 4, which is derivative of RedHat Enterprise Linux.I have currently installed WindowsXP SP3. But previously I had the same problem with SP2 at the same computer and the same partition. At that time I needed to reinstall the full Linux after installation of Windows. This was not a problem, since this was right after its purchase and there was nothing useful. But recently I needed to re-install Windows, now it is SP3. And unfortunately I have received expected result: Windows have been installed, but it made unreachable Linux. Now I need to find a way to solve the problem with fixing access through GRUB to all systems without reinstallation of Linux, since it will be too time consuming to pass all its adjustments and loading which I need.
Probably the problem is typical and well-known. Grub, Linux in one partition and installation or re-installation of WindowsXP in another partition. How to repire GRUB and entries to all systems after that?
Accidentally, I deleted my '/etc' & '/bin' folder (i know, my fault). Then, I boot liveCD and tried to copy or fix this issue. And then when I can't figure nothing to fix it, I don't know why, I want install system on my existing system, and I thought that new installation don't touch and change my /home folder. And this step Was my biggest mistake, after this I get raw /home partition without my data. Now, I'm trying recovery my data from /home, and I don't know how do this. I'm using program testdisk but I don't know how it work with lvm and ext4. Can I recover content of '/home' or it's impossible?
I had installed Ubuntu 10.10 on a W7 OS, as a dual boot. I have removed Ubuntu, and now have that space as "free space". Between the original partition (c:) and the free space, there is a partition that contains the laptop mfg's factory image. I want to recover that free space back to the original c: partition. I was reading about GParted, but do not want to attempt anything until I have some expert advice.
By mistake I formatted an ext3 partition on my external hard-drive. Now it has turned into a vfat filesystem. Is their any chance of recovering the lost data?
So, I wan't completely paying attention to the default partitioning that Red Hat Enterprise 6 does.
I was setting up a base image for VMWare and the disk was 200GB, but for some reason the default is for about 40% to go to the root partition and then the rest of it to go to /home (this doesn't include the 2GB or so in swap).
Is there an easy way to recover the space under /home and expand the root partition? Assume there are no user accounts created.
I am running a Linux server from 2000, I have Fedora12 installed as the OS. I know you can virtualize Windows XP on the system to be able to run Windows programs, but the problem is I My server has only one 1333Mhz Pentium 3 processor and 1G of Ram. granted this is a pretty kick ass computer for the day, but lacking the second processor I'm afraid that I will not be able to run Windows virtualization to support Photoshop CS3. Is there any program out there that runs similar to Photoshop, like windows Digital Image suite 10, that will run smoothly in my Linux Fedora 12 environment? or can I virtualize windows and run the Windows digital image suite 10, without slowing or corrupting my system?
I am using windowsxp in one pc and another running on fedora 11,,, i develop socket based applications which run on fedora linux. But i need to test these applications with a software running on windows xp. i found that i could not connect to socket of the application running on fedora from an application running on windows. i am not able to identify the problem. should i try any other linux distribution?
We installed Fedora on top by my WindowsXP, we have updated the connection information with the addresses, but can't access any website. Connection Manager says we're connected. We created a new wired network connection, but it doesn't appear in the choices.
I installed Ubuntu recently and had a similar problem, only mine was that my computer was competing with hers (something to do with DHCP). The solution was to alter my /etc/network/interfaces file, but I also screwed with settings in the "Network Connections" thing, pretty much altering a connection my /etc/network/interfaces file seemed to have made. My problem was only solved as far as I cared. I wonder if this is the same problem.
On the other hand, we attempted connecting the Fedora box directly to a modem and still no internet, so I believe they are entirely unrelated. But I wanted to include this for completeness in case they are.
I installed Ubuntu9.10 on a USB hard drive attached to my laptop. Laptop has pre-installed XP in the in-built hard-drive. Point to be noted is that my hard-drive is protected via encryption software called Pointsec.
The installation of Ubuntu on the USB hard drive went through fine and I'm able to boot Ubuntu from it.
But now the problem is, GRUB2 fails to detect the Windows XP installation.
Can someone tell me how I can force GRUB2 to boot Windows XP from hd0,0?
The GRUB1 way of configuring /etc/grub/menu.lst does NOT seem to work with GRUB2.
If i boot to fedora and boot back to windows i can no longer can access network/internet on windows! It says the network is disconnected. The cable is connected properly and this message is happening only because i booted to fedora 12 previously before booting into windows.
I did not have this problem with fedora 10, 9. recently i did an upgrade to 12 and this is one of the problems among the many other i am facing. In order to get internet back on windows i have to shutdown the pc and wait for a while and power on again to get network back on windows. the same issues exists on windowsXP64 and vista32.
I am connected to the internet like this pc->Realtek RTL8168D(P)/811D(P)->linksys router connected to pc by network cable --> DSL modem. the router connects to DSL by ppoe
My router's ip is 192.168.0.1. usually if i type this on my browser it will take me to the routers configuration. But a previous boot to fedora and i cant even access my router. its like it says "network disconnected".
why is fedora messing up my network connection? its pathetic that there is no OA in linux and it makes my life miserable.
I want to avoid kernel id in Grub entry. I have searched before and one poster (can't find it again) posted a very simple Fedora Grub entry that just pointed to Fedoara's menu.lst. which worked.
For Suse I use: title openSUSE 11.1 (on /dev/sda7) by symlinks root (hd0,6) kernel /boot/vmlinuz root=/dev/sda7 splash=silent showopts vga=0x31a initrd /boot/initrd savedefault boot
I nave tried: title Fedora root (hd0,4) rootnoverify (hd0,4) chainloader +1
Where Fedora is on sda5 but, doesn't work for some reason.
I am using x86_64 fedora 12 along with WinXP. I install ed windows Xp first and then F12. I can boot into F12 without any problems. But when i try to boot into windows, a blank screen appears with a blinking cursor on the top left position.
I successfully installed Fedora 11 from the DVD iso. At the end, the installation program prompts me to reboot the system. But when the boot loader appears after rebooting, there are only the old entries.
I have 2 IDE disks and one sata disk. The first IDE disk is hd0, the second IDE is hd1. The SATA disk is hd2. In the setup, I selected hd0 to install grub. Fedora 11 was installed on the SATA disk (hd2).[edit] I forgot to say, that Fedora 10 is on /dev/sda and Fedora 9 on /dev/sdb
I have a working Ubuntu install with the Grub2 bootloader. I need to manually add an entry to boot Fedora 13 off of sda. Sda1 is the boot partition, sda2 is LVM. None of the examples I've tried work. I do also have F13 grub installed on sda, but chainloading to it didn't do anything other than a blinking cursor.
a windows installation on a fake-raid, /dev/mapper/ddf1_AR01p1 and an xtra penguinFS on ddf1_AR01p2. I simply tried to boot "Super Grub Virus" from a usb stick ... and the $%!($ER hosed the array. Luckily, my day to day OS and important data is on a different set of disks ... but my BIOS boot target is set to the fake-raid, so it did not kill anything genuinely important ... I just got lucky.
I would really like to restore the windoZe partition as it WAS. I actually use it a couple of times each year. I would just reinstall the OS ... really NOTHING important on those 2 disks, but I have no idea where my XP disk can be found ... but I know the xp installation is hiding in /dev/null ....
In my dual booting system consisting windows & fedora 12, for some unfortunate reason I have to reinstall windows .Earlier it was XP. Now it will be Vista. Now how shall I recover my fedora after windows installation. Can I follow the following steps or I have to do something else:
Code: #grub #root(hd0,8) [since my / partition is in /dev/sda9] #setup(hd0)
I have installed Windows 7 and fedora 12 on my system.I want to reinstall my windows 7 but as I know after installing windows 7 , i will not be able to boot my fedora 12 how to recover bootloader of fedora 12 after installing windows 7. [URL]
I deleted Ubuntu partition from Windows and it deleted one of the LOgical partition(used for Data storage) along with it.Anny ideas how to recover that Logical partition?Windows disk manager now displays that partition as 'FRee Space'
I recently had to install ubuntu 10.10 through wubi because my olde ubuntu broke after a failed upgrade. Now I am quite happy with everything in 10.10 except I can't get to the files in my olde home folder because I chose the home folder encryption option in the installation process. How can I recover my home folder? They all seemed to be recovering from another user not another partition.
I need a way to recover my Windows partition that was completely repartitioned when I originally moved to Ubuntu.
When I first moved to Ubuntu 8.04, I somehow overwrote my Windows partition. It happened on a laptop and since then, I've purchased a new one so I can now go back and attempt to unzip the partition holding 10.04 and get to the files I had under Windows.
Well, my laptop slid off my couch and crashed down onto hardwood floor. The hard drive is shot. I was using grub and had both ubuntu 10.10 and windows 7 on it. Can't load either OS.
What options do I have for trying to recover data off the ubuntu partition? I tried loading livecd...for some reason, it won't work. Does livecd require a working harddisk?
I was trying to resize to the left the sdb5 partition where ubuntu is/was installed and things got messy. I lost the partition it was unallocated. Next "cleverly" used livecd and reinstall ubuntu (thinking it was just like a repair the system thing) but instead ubuntu install from new...all my data is lost...gone with the wind. I try sadly enough testdisk but it says partition corrupted impossible to recover. Now the whole disk shows as unallocated in gparted.
I am running ubuntu from a second hard drive and strange enough my windows 7 partition with files is save and sound. I wonder if there is anything I can do to recover my files (guess the enitre partition now is lost). I try photorec and no files were able to recover then try scalpel and it says files were not find or couldn't read the partition. Of course "cleverly" I didn't had a recent back up of my files. Now I cant access the new ubuntu partition that still in sdb5 at boot takes me directly to windows 7.
Well i have an 20GB HDD (/dev/sdb) formated with ext4 and has very important files on it .All of sudden something went wrong and the 20GB partition has been lost . Now how do i have to recover that partition and primarily recover those files . Gparted shows no partition on it but unpartitioned space .
I have deleted the ubuntu partition on my xp pc. Now at restart i have the following: GRUB loading. error: no such partition grub rescue> I have no idea what to do now. I have downloaded super grub - because one of the pages that i googled said it would help - but my pc does not read from either the cd or usb drives - don't know why.I need this pc recovered today .
Just now I accidentally used gparted and wiped the partition table on my main hard drive, and now fdisk -l shows nothing! How can i recover my partitions and avoid having to reinstall Gentoo all over again?
I have some problems with LVM partition.We have suse linux 9 on our FTP server. After crashing our power supply we face some problem with our hard disks.We have 3 hard disks on our system, one is 80 G and two are 250 G. The Os is installed on 80G hard disk and 250G hard disk has LVM partition.After fixing the power supply, the Os is booted but LVM partitions are not mounted automatically.After researching on the web, I found a lot of article about LVM partitions but I want to recover my LVM partition.
1)What should I do to be able to mount my LVM partition and recover my data. 2)Can I mount this LVM partition on another system. I mean I have connected one of 250G hard disks to usb port, and yast detect this hard disk. Of course on the main system it was detected, too.