I have enabled desktop effects in KDE on Fedora 10.
I clicked "everything is OK", and accepted the settings and then everything went black ...
Then I have restarted X, logged again, still nothin' ... all black .... windows and action is present, but I can't see anything ...
How can I recover this ? I am using gnome now, ...
This community is very helpful to me.i have one external usb harddisk but its not getting detected any where.i have some important data.i want to recover that data.so could any one telme how to recover data from dead usb external hard drive.any help appreciated please helpme.no hardware is detecting but one small green light is coming.
View 3 Replies View RelatedSince I started using Fedora 10 I can't login as root. Even though the system recognizes the root password when it requires it for certain administrative tasks it refuses to let me login as root.
When I try to edit httpd.conf I get the message "could not save file..." it doesn't even prompt me for the root password. My httpd service is dead and I can't resurrect it, what should I do?
I find myself in the strange position of having an old P4 system that I want to throw Fedora 10 on - it's a considerable upgrade from the old 866Mhz P3 that I've been using to do some number crunching on. (It's a personal project, but it's CPU intensive, so the P4 is a welcome upgrade.) My problem with it is that the motherboard's AGP socket is dead, and I can't find a PCI graphics card, so I'm trying to do a totally headless install - I have no idea what errors may be shown, if any. All I know is that whatever I've tried up till now hasn't worked.
1. Remove the hard drive from the P4, stick it into a spare, semi working system (AMD Athlon, RAM isn't working too well), install F10 on the hard drive, remove the drive, put it back into the P4, and let it boot. Results: Nothing. No DHCP announcement, so I don't know if it's done anything.
2. Try a variation of a PXE boot using the vnc parameter. I've copied the instructions here with no luck. Tried it using a nearby mirror (mirror.nus.edu.sg) as well as method=cdrom, with no luck on either. Results: Also nothing.Should I give up on this, or is there anything else I should try?
I have a dell inspiron 530 desktop with core 2 quad and 4GB memory, running 32bit vista and 64 bit fedora 10. I searched on the web with "can I install 8GB memory on dell inspiron 530", and got couple of articles that says I only needed a bios upgrade.I downloaded bios version 1.0.18 from dell and run that in Windows to replace bios 1.0.12.After it said upgrade successful and asked me whether I wanted to reboot to have the new bios taking effect, and I said yes. And it shutdown the computer, and never came up Now, when power up, I see nothing, not even the "F2 to setup, F12 to boot menu" message, much less the grub selection. Is there a way to revive the computer?
View 4 Replies View RelatedI have a problem with the openoffice 3.1, install it and I worked fine in Fedora 14, but I restart the system and no longer works. nothing happens with any file.
to download from the official site and install it manually.
I can not fix
I have installed Fedora 12 then updated all the packages, after that my windows got crashed so i reinstalled Windows 7 then i lost my grub loader
recover my Fedora 12 with out reinstalling it again
In my dual booting system consisting windows & fedora 12, for some unfortunate reason I have to reinstall windows .Earlier it was XP. Now it will be Vista. Now how shall I recover my fedora after windows installation. Can I follow the following steps or I have to do something else:
Code:
#grub
#root(hd0,8) [since my / partition is in /dev/sda9]
#setup(hd0)
I have installed Windows 7 and fedora 12 on my system.I want to reinstall my windows 7 but as I know after installing windows 7 , i will not be able to boot my fedora 12 how to recover bootloader of fedora 12 after installing windows 7. [URL]
View 1 Replies View RelatedAfter installation of Windows XP in the disk where Linux was installed in another partition the GRUB menu allowing to choose operation system to load dissapeared. This menu previously appeared right after switching the computer on. But after installation of Windows in the partition intended for it only WindowsXP is loaded automatically once I switch on my computer. But switching it on with Linux rescure cd-disk results in loading my ordinary Linux from hard drive. This shows that Linux is not destroyed at the loading of Windows, but just made unreachable. Possibly installation program for Windows has destroyed GRUB or some of its files. Does somebody know how to restore normal functioning of GRUB?
Details:
I am using Scientific Linux 4, which is derivative of RedHat Enterprise Linux.I have currently installed WindowsXP SP3. But previously I had the same problem with SP2 at the same computer and the same partition. At that time I needed to reinstall the full Linux after installation of Windows. This was not a problem, since this was right after its purchase and there was nothing useful. But recently I needed to re-install Windows, now it is SP3. And unfortunately I have received expected result: Windows have been installed, but it made unreachable Linux. Now I need to find a way to solve the problem with fixing access through GRUB to all systems without reinstallation of Linux, since it will be too time consuming to pass all its adjustments and loading which I need.
Probably the problem is typical and well-known. Grub, Linux in one partition and installation or re-installation of WindowsXP in another partition. How to repire GRUB and entries to all systems after that?
I have a system set up with Fedora 9 - the Fed10 installer choked on an older Intel video chip. I've decided to try updating to 10 in anticipation of further upgrading to 11. Reading this forum and elsewhere convinced me to try preupgrade. I started it and saw Fed10 as an available upgrade path, selected it. At that point, the system appeared to freeze -- the progress bar got about 10% along and everything sat for 10-15minutes. I exited out of preupgrade and tried the rpm path.
That didn't fly either -- I was told that there were no packages marked for upgrade. I read more about preupgrade, including the fact that it might give the appearance of having locked up although it was still working. So I went back to preupgrade. This time, Fed10 didn't show in the selection box. It was, in fact, empty except when I checked the box for beta/unstable and could see Rawhide.
How do I get back to where I was with preupgrade so that I can finish what I started? Alternatively, how can I do a 9 to 10 upgrade from this point (preupgrade grayed out and rpm reporting no packages)? I expect to further upgrade to 11 in a couple of months, so the step to 10 is necessary. I do not have a separate /home partition and I have some very expensive (and difficult to set up) software that insists on sitting in /usr/local, so a full install, though doable, isn't something I want to undertake -- I'd much prefer to do to upgrades from 9.
I have installed a bad kernel that refuses to boot and there are no other options in the grub menu.But I can boot from the liveCD and fire up a Terminal. So my question is, what commands do I run to mount the /root and /home partitions so that I can copy the bad kernels to /home/username/ and restore the system by updating the kernels to the latest one* ?*: Either by issuing 'yum install kernel kernel-devel kernel-headers perf' at the # prompt or by manually copying the vmlinuz, and initramfs image files from the latest rpms. However, I don't know how to extract files from rpms in general and I don't know where to look in the rpms for the specific files.
View 6 Replies View RelatedDid an upgrade today from 9.04 to 9.10. As far as I can tell, everything is working, with the exception of Firefox 3.5.6 with new install. I've attempted an uninstall and install. Tried the following with 3.5.6:URL...I finally found that if I use sudo (or gksudo) I can run firefox at the command prompt. Any other time I run it, it just shows an icon on the lower bar and then it disappears, but within the system monitor it shows Firefox and will show as many as you run the icon with.
I've deleted the entire .mozilla directory, and manually removed all the firefox info fro /usr/bin also before a reinstall. I assume it is either a strange permission issue or some link related issue."which firefox" shows:/usr/bin/firefox and the 3.5.6 files are located /usr/lib/firefox-3.5.6 . Any help would be great, I'm at a loss at this point. I'm sure it's something simple, but it's a royal PITA.I have nxserver on the machine, if that means anything and there was a session locally as well as one remote during the upgrade (using the same account).
I've got a toshiba A135 series. I installed 9.10 from a live cd, and the installation process went fine.
When I rebooted the computer, it loaded up giving me the option to select one of the following:
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)
Memory text (memtest86+)
Memory test (memtest86+, serial console 115200)
I chose the first one, hit enter and the computer went to a black screen with the cursor up in the top left corner blinking away. Then nothing. I've read that this distribution is giving folks a lot of trouble. Has anyone had this same thing happen to them after a clean install?
I recently had ubuntu as my main operating system on my computer, but that wasn't working out because iTunes just does not work on ubuntu. So I started to try to dual boot windows XP, but when I tried to create the partition, all of them crapped out on me, so now I'm left with a computer boot anything, it just goes straight to error loading operating system. Now I can't get the one folder that I need off of the ubuntu installation because I don't have permission too.
View 5 Replies View RelatedI just installed Windows 7, so my grub is gone. I was wondering if there is a way to use a live cd to boot into my ubuntu partition. I'm likely going to scrap my ubuntu partition soon, so I don't want to mess with installing grub.
View 5 Replies View RelatedMy part time hobby PC, running FC12, has started misbehaving following some recent updates. I hadn't booted the machine for about 10 days. It booted OK, I checked for updates, applied them, and then my problems started.When I boot now I get LONG delays after logging in and eventually will get the following error:
Could not display "x-nautilus-desktop:///".
Error DBus error.org.freedesktop.DBus.Error.NoReply:
Did not receive a reply, etc, etc...Have tried re-installing Nautilus, same problem. Being a relative Linux (though not Unix) newbie, what is Nautilus? Do I need it? Can I just get rid of it? Is there an alternative I can install that does work?
I know that this topic has been posted, responded to, and maybe even resolved, many times here, but I am stuck here with partially dead fileserver and need some pointers.
Problem: one disk drive that was part of a logical volume died. I have a replacement, but I can't get it into the LV and get the LV back up again.
pvcreate --uuid <uuid of dead drive> /dev/sdX1, where /dev/sdX1 is the newly created drive and its partition.
vgcfgrestore VolGroup
vgscan VolGroup
vgchange -ay VolGroup
e2fsck /dev/mapper/VolGroup-LogVol
but, e2fsck can't find a superblock. Apparently this drive is the first in the LV sequence, and it is not formatted as part of the LV.
So how to I get this new disk formatted into the LV without reformatting the entire LV and losing what data I still have?
(FWIW: this is on F11)
Quote:
When I look the Services panel, nxserver is listed but shows as "Service is Dead". Does this mean anything specifically? Could it be related to firewall or security issues? Right above it a related program to nxserver, nxsensor, is listed and it's shown as operational.
Same thing here in my Services panel. Just getting into using NX...the display seems near Win RDP quality over the home lan. I'm now trying to get the sound to work. What is this 'dummy output' in my Sound preferences and where did my sound cards go? I have one onboard sc and a PCI card, neither recognized via the NX client session. Looking to get ESD going which might be the issue.
/dev/sda1 * 63 35166284 17583111 7 HPFS/NTFS
/dev/sda2 35166285 80228609 22531162+ 83 Linux
/dev/sda3 80228671 234440703 77106016+ 5 Extended
[code]....
I've got a problem with samba and the nmb service. My system boots in Gnome
Ive set up Samba and it works ok, untill I reboot, then I have to go into services and restart Nmb service. the services bit says its dead after a reboot, its running on run levels 2345 I had a few hicups setting it up took me a couple of days to figure out the fire wall and SElinus were blocking things, so I ticked all the samba things - and it works a whole lot better.
I have to admit its a whole lot more polished than last time I tried linux - Red Hat 5. I like the Yum installer it takes a lot of guess work out for us novices, one thing I would like is to be able to edit and open things as root in Gnome or just log into it as root so that you can set things up, but I'll save that question for another day.
I have Fedora 11. After my most recent update, I can't log in. Every time I authenticate, the logon window disappears, the screen goes black briefly, and then I am back at the log in window I entirely reinstalled, and then it worked, until I updated to the newest kernel then it didn't work anymore. Update: I now generated a xorg.conf with system-config-display --noui I manually removed and reinstalled xorg-x11-drv-intel with yum. It didn't work. By the way: now the start hangs on "Starting atd: OK" If I specify "vesa" in xorg.conf, then it gets past the point, but display doesn't load properly.
View 14 Replies View RelatedI have FC 12 install on a Compaq nx9600 that comes with a Broadcom BMC4306 wireless card. I'm not sure what my kernel is, but I have all of the updates for FC 12.Whenever my laptop resumes from Hibernation/Suspend my Enable Wireless check box in the Network Manager is greyed out and it will not come back till I reboot the computer. Is there any one out there that can help with this problem, as I do not want to disable my Hibernation/Suspend as I tend to forget to turn the laptop off for a few days on end, and this beast sucks a lot of power so it is a drain on my power bill.
View 2 Replies View RelatedI have opened up the Service Configuration window that shows all the services and their status. My httpd says that it is enabled, but also that "this service is dead" and there is a orangish triangle. I can run phpMyAdmin on my server, but I can't run it from any other PC on my network.
View 13 Replies View Relatedi just installed Fedora 12, clean without anything change in it. I opened services dialog, and the openvpn service have status:dead, however it shows that it is enabled.when i try to run it as:/sbin/service openvpn start.It write OK. However if check it:/sbin/service openvpn status it write that service not running. What is a point of a problem? I have opened openvpn in FireWall,however without success, may be some additionsl services for openvpn are not running?
View 1 Replies View RelatedI have been running Fedora 12 on my HP Proliant DL140 Server for about 6 months now without any issues, yesterday I ran yum update and rebooted afterwards but the server now wont boot
View 14 Replies View RelatedI have cloned linux installation from USB drive to another. The system is Fedora core and it is used as a software for encoding live stream (it's using PCI encoding cards). The system works well on original hardware configuration, however when I use this cloned flash drive on another hardware configuration one service will not start. It is a "calld" service and it is a service which has a protection which limits its execution to original hardware platform only (mac authentication probably). I need to get this service up, so when I type command "service calld starts/tatus" or "etc/init.d/calld start" I get response "service is dead and subsystems are locked". I tried matching mac address to original hardware configuration but still the same. This is a config file of service /etc/init.d/calld
#!/bin/bash
#
# /etc/rc.d/init.d/calld
#
# Starts the calld
#
# chkconfig: 345 44 56
# description: xxxxxx
# processname: calld
### BEGIN INIT INFO
# Provides: calld
# Required-Start: $syslog $local_fs
# Required-Stop: $syslog $local_fs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: start and stop calld
# Description: xxxxxx
### END INIT INFO
# Source function library.....
I wonder is it possible to get it up by changing its configuration.
I'm having major network issues. I cannot get a real IP address with this RHEL installation I have. Im using a Braodcom NetLink ethernet card and the tg3 driver that came with my install cd. When I go to services it says my NetworkManager is enables but dead.
View 5 Replies View RelatedI downloaded one of the businesscard isos and booted up, but have run into the problem that my usb keyboard is dead in the installer. It works in setting up my bios, and has always worked before, but I cannot choose any items on the installation menu. I found a bug report that seems to be this issue, but it said that this would be fixed when debian moves to the 2.6.32 kernel on the installer.
View 1 Replies View RelatedI've been searching these forums for about 2 hours now, trying nearly everything I've come across to make these two things work... all I want to do is watch some damn ..... videos and maybe some videos off [URL].
View 4 Replies View Related