Well i have an 20GB HDD (/dev/sdb) formated with ext4 and has very important files on it .All of sudden something went wrong and the 20GB partition has been lost . Now how do i have to recover that partition and primarily recover those files . Gparted shows no partition on it but unpartitioned space .
View 1 RepliesA HP Netserver LP2000r, with original SCSI controller and HP NetRaid-2M controller, 3x 36GB Ultra3 HDD in RAID5, Debian (sarge/etch), has crashed after 992 days without reboot. From all that I can see, a hardware failure, most likely with the memory. The HP Diagnostic tools cannot find any problem, but everytime I boot into Knoppix, I get between 2minutes and 2 hours of runtime, and then either a kernel oops or just a complete and sudden halt.
Well, the box has earned its money. However, there is some data on the drives that I need to recover (yes, I have beaten myself up properly about not backing up that data, don't even go there !). There are three partitions: sda1 is /, sda2 is swap and sda3 is a LVM volume with 3 logical volumes on it. As far as I can tell, the hardware defect must have been creeping in and has made a total mess of the inodes in all these partitions.
After booting into Knoppix, I can restore the volumes using pvscan, vgscan, lvscan, vgcfgrestore and vgchange. If I try and mount them: mayhem. So I try and check them, using fsck.ext3. All sorts of interesting nonsense, such as a completely empty inode 11 (the first inode) and then obviously from there on all else is pointless. I tried using debugfs, but the information on what to do with it is somewhat spurious.
P.S.: Tomorrow I will go and get myself a 16GB Flash Drive and then hopefully I will be able to dump the partitions one by one onto that drive and transfer the images onto a different computer for analysis and data recovery.
I am facing a serious problem.I installed UBUNTU 10.04 and encrypted it during installation. I accidentally erased some of the necessary files from root folder. now the the OS is NOT booting.luckily i still have the encryption key i have some important documents in that drive (desktop folder).
PS: I have tried to run Live Ubuntu it shows the Root, but it does not enter any of the folder.
Original disk:
XP NTFS primary
Linux / ext4 logical
Linux /home ext4 logical
Win 7 NTFS logical
NTFS data logical
swap space
NTFS recovery partition
I tried to install linux, as there was a problem with XP overwriting grub, I chose write grub to /dev/sda8 (which is where the linux install was appearing earlier).
I guess this borked the filesystem somehow. Now the NTFS data partition and the swap space are appearing as one free space.
Well actually before that some linux live CDs (including gparted were seeing the entire drive as unpartitioned). I had to go into XP and delete the /ext4 partitions.
Is there any way for me to recover the NTFS data partition ?
Well, my laptop slid off my couch and crashed down onto hardwood floor. The hard drive is shot. I was using grub and had both ubuntu 10.10 and windows 7 on it. Can't load either OS.
What options do I have for trying to recover data off the ubuntu partition? I tried loading livecd...for some reason, it won't work. Does livecd require a working harddisk?
I installed windows 7 over an existing xp partition and windows 7 made a 100 mb partition as some sort of windows swap space thing. This basically made my ubuntu partition unreadable, even with gparted. How to recover this data?
View 5 Replies View RelatedI unknowingly formatted my whole 160GB hard disk to ext4 file system from Fat while installing Ubuntu. Now my hard disk has only one ext4 partition. recover my old data.
View 2 Replies View RelatedI deleted an old ubuntu partition, I reinstalled Ubuntu but is there any software for Ubuntu or any other Linux operating systems that can recover my data?
View 2 Replies View RelatedI need to mount a bsd/386 partition on my hard drive to recover data. I am running the latest CentOS 5.3, downloaded and installed in the last week.My searches have turned up a mount command, that does not work.
[root@new-host-2 ~]# mount -t ufs -o fstype=444bsd /dev/sda3 /mnt/bsd
mount: unknown filesystem type 'ufs'
[root@new-host-2 ~]# mount /dev/sda3 /mnt/bsd
[code]...
So, is there a patch to get mount -t ufs working?is there a patch to get bsd/386 filesystem type? have not build a kernel before, so I would like to avoid that, but I will attempt it if I have no other options.
is there a way to recover data from a hd partition type fat32...cause ...cause right now it shows up as unallocated space..earlier i tried installing windows in a unused partition located just above this partition....i need to recover the data real soon...
View 1 Replies View RelatedI wanted to upgrade from Intrepid to Jaunty. I opted for a format/reinstall as I figured upgrading usually sucks. To save my important data, I resized my partition (partition A), formatted the empty space with ext3 (now partition B), and moved the necessary files from partition A to partition B. Then I went through the install process and installed Jaunty on partition A, telling the installer to NOT format partition B. It gave a warning about the installer deleting system folders (var, usr, etc) but I figured it didn't apply. I was wrong.
So now partition B is "empty." I know it didn't format it, but I need to get those files off of there. I have created an image of partition B using ddrescue, but I don't know where to go from there. I tried using foremost, but it won't recover things like my virtual machines and completely nukes the original file structure I had. And I've tried mounting it (using sudo mount -t ext3 -o loop /home/user/recovery.img /mnt), but that doesn't seem to work. The mount command completes successfully, but nothing shows up in the folder I mounted it to.
I was putting the cover back on my Antec p180b, and I guess it got stuck and gave it a hard bump (pretty much broke the cover). As a result, one of my hard drives, a Seagate Barracuda ST3750640AS, got messed up or something. All the other hard drives are fine. It's in an LVM with another hard drive, so now I can't boot up into my computer. So I booted into the installation CD:
Code:
# find /dev/sd[a-c][1-3]
/dev/sda1
/dev/sda2
[code]....
This led me to believe the partition was messed up. So I ran cfdisk, and it said something about a missing partition table or something. Additionally, instead of showing the single partition on it, it displays, from my recollection, Pri*Log. To my knowledge, this is the only problem with the hard drive. So now I need to either somehow create or restore the partition table without overwriting the data. Or get a new hard drive, and some how recover the data (LVM, partitions, and all).
By mistake I formatted an ext3 partition on my external hard-drive. Now it has turned into a vfat filesystem. Is their any chance of recovering the lost data?
View 4 Replies View RelatedI have 8.04 running mdadm raid 1. I selected the wrong drive in gparted and managed to hose my partition tables.
View 7 Replies View RelatedI used to have a 1TB external drive with lots of stuff on it. But after a reported drive failure during a F11 install the partition table seems to have been lost. (I think F11 toasted it)
Disk /dev/sdc: 1000.2 GB, 1000215724032 bytes
255 heads, 63 sectors/track, 121602 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
The drive used to have xfs and a partition. Is there any way to rebuild the partition? Or is my 1TB of data gone forever? The drives seem to be fine now... I just want to get it up enough to either pull any data or just to get a file list. Most of the stuff on the drive was from somewhere else.(ie 300GB of NRN data for all of North America.
I have a 250 GB external disk, where there was store a hundred and something GB of data. Pictures, music, documents and TV-shows. It was FAT32. In an attemt to make an live USB drive with openSUSE, I did exactly what I shoulden't do: I mistook the external disk for the the USB drive. Now the external disk has a 700 mb linux partition, while 232.2 GB is unpartitioned. TestDisk from CGSecurity is looking to see if there is a lost partition table there, somewhere. Is there anything I can do? There was no formating, so the data is still there (except for those 650 mb that was overwritten). Is there any way to rebuild the old partition?
Output from "fdisk -l":
Disk /dev/sdc: 250.1 GB, 250059350016 bytes
64 heads, 32 sectors/track, 238475 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
[code]....
My main partition having all my data like movies, music, files,etc has become inaccessible. Its file system was NTFS. Due to some recent resizing using GParted, the partition as well as my WIndows 7 OS has become unbootable due to some errors. The data partition's file system has become unknown. I don't care much about the OS but I would like to recover my drive. I am trying to achieve this using Testdisk and Photorec but haven't met with much success so far. The main problem is I can see my partition and all my files through Testdisk but I am not able to copy them to another drive. When I try to copy the option I get is of copying them to the DVD and not to any other partition.
View 4 Replies View RelatedPossible Duplicate:Recover a file deleted using rm command in Linux.I have accidentally deleted all the stuff under my home directory, say /home/OriginalWood, is it possible to recover?Now the home directory is empty and not yet overlapped by any data. So, is there a way to recover?
View 1 Replies View RelatedI wanted to get some data off a second disk, let me tell you what I did. (that didn't work). The data I am looking for is under /etc/ on the second disk. I looked in /dev for /dev/hda or hdb but there was nothing.
I found:
/dev/sda
/dev/sda1
/dev/sda2
/dev/sdb
/dev/sdb1
/dev/sdb2
So I guessed /dev/sdb /dev/sdb1 /dev/sdb2 was the second disk. So I did:
mkdir /tmp/olddisksdb
mkdir /tmp/olddisksdb1
mkdir /tmp/olddisksdb2
Then I did
mount /dev/sdb /tmp/olddisksdb and got mount: you must specify the filesystem type
mount /dev/sdb1 /tmp/olddisksdb1 and got no feedback (good?)
mount /dev/sdb2 /tmp/olddisksdb2 and got mount: you must specify the filesystem type
If I do:
ls /tmp/olddisksdb - I get nothing.
ls /tmp/olddisksdb2 - I get nothing
ls /tmp/olddisksdb1 - I get:
config-2.6.18-128.el5 symvers-2.6.18-128.el5.gz
config-2.6.18-164.9.1.el5 symvers-2.6.18-164.9.1.el5.gz
grub System.map-2.6.18-128.el5
initrd-2.6.18-128.el5.img System.map-2.6.18-164.9.1.el5
initrd-2.6.18-164.9.1.el5.img vmlinuz-2.6.18-128.el5
lost+found vmlinuz-2.6.18-164.9.1.el5
message
This is a CentOS box.
During a new installation of openSuse 11.2, because of a mistake, I lost access to previous partitions.
I was advised to use testdisk/testimage, but of course it didn't work, because my lost data had beeen encrypted.
How can I make linux ask me the previous root password?
I think any program that doesn't ask the previous password, isn't able to recover data. Is it true?
I bought an IcyBox NAS a little while back, and it recently died on me. I have physical access to the disks inside (1.5TB RAID 1 array), and the box was running a version of Linux. I now have the difficulty of retrieving the data from the disks. As best I can tell, the NAS uses software RAID. All I have available are 2 Windows machines, one of which has sufficient free space to hold the data from the NAS. I've booted one of the Windows machines into Linux using a Ubuntu CD, and Ubuntu can see the array drive(s), but cannot mount them.
What would be the quickest and easiest way to retrieve the data from the disks? What data can I collect from Ubuntu (10.10) that will help me pin down why it can't mount the array volume?
On my drive I had 2 partitions for an Ubuntu 9.04 (swap, /) and one partition for Windows. I figured out that I should upgrade my Ubuntu, so I deleted the "/" partition and in its place created 2 new partitions (/, /home) .
After installing the latest Ubuntu 11.04, I realised that although I had backuped everything I needed in a 2nd disk and I could access those folders and their data from my Ubuntu 9.04, both my Windows and the 11.04 can locate neither the folders nor the data now. I have no idea why this happened (perhaps some issue with the mounting?) I have tried the trial version of Stellar Phoenix linux data recovery tool, but it cannot locate the old partitions.
I have accidentally removed vmware virtual disk, my host operating system is RHEL5.2 with ext3 file system, i have used photorec, magicresue and foremost but still no luck to recover the vmdk file. i have seen in foremost configuration file that there are some predefined files (ex- doc, pdf, jpg, avi, zip, etc),
1. is there any way to add vmdk file extension on that configuration file?
2. if yes how can i do ?
3. by adding vmdk on configuration file, can i specifically use recover option for vmdk?
I have accidentally ended up in deleting my root directory while I blindly fired command while watching movie.
I fired following command
#rm -rf ~/<SPACE>*.out
instead of this command
#rm -rf ~/*.out
Things already done:
1) Created /root directory relogged to get some of basic settings of gnome and Desktop.
2) Things went well now when I login my desktop ,gnome environment and other things looks to be working well only prompt on my terminal has changed. I can fix it any ways.
Things I want to ask:
1) I haven't studied much about contents of /root directory to best of my knowledge is it like other user's home directory with some basic configuration files for mostly required applications. SO my question is have I lost any thing important system file or something?
2) If I have lost any important configuration or system data how can I recover it without reinstalling whole system? (My opinion about this is, It is quite possible but to do so, as far as I know capabilities of linux. But I still want comments from experts before I try any things on it because I don't want to backup my whole HDD and reinstall the whole stuff again for me and also my sister's stuff in MS.)
Last night I made the mistake of formatting my media drive. Before the format, it was ext4. then I formatted it to ext4 again because I wasn't paying attention to what I was doing(this mistake only gets made once). Now im looking for away to recover any/all of my data. The drive in question is 1tb. I have not written any new files to this drive.
View 5 Replies View RelatedI have deleted the ubuntu partition on my xp pc. Now at restart i have the following:
GRUB loading.
error: no such partition
grub rescue>
I have no idea what to do now. I have downloaded super grub - because one of the pages that i googled said it would help - but my pc does not read from either the cd or usb drives - don't know why.I need this pc recovered today .
I've been using Ubuntu 10.10 for just under a week. Recently, a partition called 'Data' has disappeared, and all my music and documents along with it. The folder is not to be seen in Places or on my desktop. My only way of finding it is to go to terminal. But when I try to open it there I get an error saying I don't have permission to read it. In Puppy Linux and SliTaz I can easily find the partition and read it. What should I do to bring it back in Ubuntu?
View 3 Replies View RelatedI've formated partition to empty - only erased information that partition is NTFS.
Partition data haven't been changed. So i think only little change to partition table is required.
How can i recover it?
I was installing windows vista on my computer, so I backed up everything to a external drive which was formatted with ext2. I then proceeded to install windows vista. When I got to the partition section I tried installing windows vista to my raid 0. When it didn't work I decided that I would delete all my existing partitions and create a new one. Well in my haste I accidentally deleted my ext2 partition from my backup drive that was still connected. As soon as I realized what I had done I shutdown the windows install and disconnected my external drive. This is the current state of my drive from parted:
Model: WD 15EADS External (scsi)
Disk /dev/sdb: 1500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
I know that the drive only had one partition before and that it took up the entire disk and it was ext2 (maybe ext3).
I moved my NTFS partition with XP and after restarting got the grub> prompt. ls,grub-install and mount are not recognized. find /boot/grub/stage1 (hd0,2,a)
how can I recover? my *nix is osol and I have grub 0.97 (legacy)
I have both a osol and ubuntu cds, but it seems I should be able to load from the grub prompt.