After upgrading Ubuntu to version 11, vmware-server-console stopped working - only gray window opens. After killing the process error message appears:
/usr/lib/vmware-server-console/bin/vmware-server-console: symbol lookup error: /usr/lib/i386-linux-gnu/libgio-2.0.so.0: undefined symbol: g_cclosure_marshal_VOID__VARIANT
installed VMWare workstation by following the steps on this page. Everything seemed to install ok, I have a VMWare Workstation and VMWare Player link in my System menu, but when I click them nothing launches.
I even rebooted to see if that would help, nada.
how I can launch VMWare Workstation? Need to set up a couple Windows clients.
Since a few weeks I cannot open a console in vmware server 2.0.2 anymore. I don't know exactly when this started because I use vmware only occasionally (I have only 1 program (an old Ashlar DrawingBoard) which does not run properly in wine). VMware server and the console have been working before without problems, but now I get the message "Cannot connect virtual machine console." and it times out. This is on Opensuse 11.1 with VMware Server on the same pc, Firefox and the guest is Windows2000.
I have tried to disable all extensions in firefox 3.6, disabled the firewall, even created a new user (on the same pc) with a clean firefox, all without any result. However when I connect from a different computer which runs Internet Explorer under windowsXP, then I can get the console without problem.
So, somewhere there is something wrong between Firefox and VMware server.
I am very new to this site. Is there a good tutorial on installing CentOS X86_64 on VMware Server Console?
View 2 Replies View RelatedI'm trying to access the VMWare console from firefox using the VMWare plugin. The problem is that it doesn't work on Firefox version 3.6.8. So how can I access the console?
View 2 Replies View RelatedI have installed fc12 on my core2due machine, and I have installed the vmware server on it, its rpm is installed successfully with out any error, after that a message is displayed
The installation of VMware Server 2.0.2 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "rpm -e VMware-server".
Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
I tried this command and find the this message
[Akram@localhost Downloads]$ su -c "/usr/bin/vmware-config.pl" Password: Making sure services for VMware Server are stopped.
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] yes
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
Your kernel was built with "gcc" version "4.4.2", while you are trying to use "/usr/bin/gcc" version "4.4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.4.3" anyway? [no] yes
What is the location of the directory of C header files that match your running kernel?[/usr/src/linux/include]
Now it asks me in last lines that "What is the location of Directory of C header files that match your running kernal?"
Recently i upgraded my laptop from ubuntu 9.10 to 10.04 but alas! after the upgrade i don't get anything, just the 10.04 boot up screen and my cursor after some time. when i run it in recovery mode and tried to startx from there , it gave me a message " no protocol defined " now i can only access my system in failsafe x mod. code...
View 2 Replies View RelatedOk so I followed the instructions here [url] and this works great for the install however if the machine is rebooted the VMWare server refuses to start back up stating that it knows that its installed but it was not installed with the right installer.
This is on a Dell Server I can't remember the model right now but its got Dual PIII in it. I'm running Ubuntu Server 32bit 10.10 on the box as well. Thank you in advance for your assistance with this. Once I get this first server figured out I'll get my other one fired back up.
I performed a system update yesterday to CentOS version 5.4. Now I cannot get vmware to start. I get the error "VMware Server is installed, but it has not been (correctly) configured for the running kernel. To (re-)configure it, invoke the following command: /usr/bin/vmware-config.pl." I tried running vmware-config but that did not resolve the issue. I saw the bug related to 2.0.x (after the update), but that does not seem to apply to 1.0.9.
View 7 Replies View RelatedI have a headless server, and I want to prevent GDM 2.30 from starting the graphical login on the console screen. As I use XDMCP, I still need GDM running on the server... With previous versions of GDM, I was doing that through gdmsetup, which ended with these lines in /etc/custom.conf :
Code:
[servers]
0=inactive
but it seems that it's not working anymore with 2.30...
How can I start a program from tty1 console text mode to be executed in tty2 console text mode? Actualy I would like to start a program (chat client cli program) in tty8 automaticaly when linux PC boots.
View 6 Replies View RelatedI'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
Why my mouse doesn't work in console?
View 2 Replies View RelatedI finally got my system to boot to a console prompt. This is a fresh installation of fc10 that I have struggled to get working with my old Adaptec 2940 scsi hardware. I am a little fuzzy on the whole gtk, gdm, gnome thing. So how do I go from this console prompt to configuring the new installation with desktop?So let's say I am logged on as root on the console.
View 8 Replies View RelatedI tried most methods suggested on many sites to install drivers
## through the additional driver panel only
## through the Nvidia.run file I downloaded
## through the terminal using apt-get
All failed to start ubuntu gui it takes me to the console login and I noticed it says "saned disabled" edit /etc/..something. This problem made me install ubuntu again three times and every time I activate the driver then install the driver Nvidia.run or through apt-get and both leads to a black screen tty1 login. So what to do now I installed and removed many things and I won't reinstall ubuntu again. Also I typed compiz and this came on:
root@ubuntu:/home/sherbieny# compiz
Xlib: extension "GLX" missing on display ":1.0".
compiz (core) - Fatal: Root visual is not a GL visual
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :1.0
Launching fallback window manager. I want to install properly so that I can start normally and enable the extra visual effects and the custom effects. Please elaborate the steps clearly
New Info:
When I enter nvidia-settings : server X opens and says
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root), and restart the X server. When I enter nvidia-xconfig as root and restart nothing happens and when I enter:
nvidia-detector it says none
and when I enter: nvidia-smi
Error: API mismatch: the NVIDIA kernel module has version 260.19.21, but this NVIDIA driver component has version 260.19.29. Please make sure that the kernel module and all NVIDIA driver components have the same version.
Failed to allocate an RM client
Could not allocate resources!
root@ubuntu:/home/sherbieny# apt-get update kernel
E: The update command takes no arguments
A new and very exciting error everyone now also the windows 7 that I have besides linux has also crashed and cannot open the login window. I don't know whats happening all I know is that few hours ago I logged in to windows normally now I cannot login to either one of them and the funny part is: I'm working on my thesis on this computer and I cannot work anymore and I'm supposed to meet with the professor on monday.
run VMWare ESXi and have installed Ubuntu 10.10 in a virtual machine.People say you press CRTL+ALT+F1 to exit back to command line from the gnome login screen but this never works for me.If I do something like "sudo service gdm stop" it just delivers me to the desktop background almost like the machine has hung, no menus toolbars, mouse or anything.Basically what I want to be able to do is start up the machine with command line, and go into gnome on occasion and exit back out to command line to save resources, this is because the machine will mainly serve as a web server. I followed the guide here [URL] which tells how to make ubuntu always start at CLI, which works nicely, but I need a way to be able to get back to CLI from inside gnome.
View 3 Replies View RelatedThe usual way to access to a virtual machine console from a VmWare server 2 is to use Firefox :
- you type the URL of your VmWare server, e.g. : https://myserver:8333
- then you click on the console tab, for the vm you want to access to
- the first time, firefox tells you to install a dedicated plug-in
- then, when you click on the right panel, a new window appears for the vm console.
But on a fresh installed x64 Suse 11.3, with Firefox 3.6.6, the plug-in does not open the window and you get an error : "Cannot access virtual machine console. The request timed out." There is a workaround that I find much more convenient than to use firefox :
- you need to access to your vmware server installation :
/usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/webapps/ui/plugin
- you fetch the vmware-vmrc-linux-x64.xpi file and you copy it somewhere on your Suse PC (e.g. /home/myhome)
- you change the extension : mv vmware-vmrc-linux-x64.xpi vmware-vmrc-linux-x64.tar.gz
- you unzip it : unzip vmware-vmrc-linux-x64.tar.gz (it will create 2 files and 2 directories : components and plugins)
- you will run the VmWare plug-in directly : plugins/vmware-vmrc
- for the hostname, you have to enter : myserver:8333
- and it works !
ref : VMware Communities: HOWTO: Standalone Linux remote console ...
I am using a virtual pc software called VMWare workstation ver 7.1. platform win 7. I installed a redhat linux 5 in vmware. I am able to access graphical mode but unable to access the console mode (ctrl+alt+f1....f6).
View 4 Replies View RelatedI'm trying to move a mysql 5.1.50-community InnoDB database from one location to another.When starting the service I get:Starting MySQL.Manager of pid-file quit without updating file [FAILED]I've searched for a way to do this but I can only find people who describe what I've just done.
View 6 Replies View RelatedI completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
I have just loaded Ubuntu 10.0.4 all OK
Loaded VMware Server 2.0.2 All OK
Opened VMware Infrastructure Web page and created new machine. Still OK
Click on new machine and go to console and power on.
Receive error:
Cannot access virtual machine console. Request timed out. The attempt to acquire valid session ticket for "xxxxxx" took longer than expected. If this problem persists blah blah blah
I suspect this is a problem with Mozilla Firefox 3.6.3.
I have an old computer (Pentium 4) without a monitor. To make the most of it I installed Ubuntu server on it and have been using it for almost a year. A couple of months ago I don't really recall what I did but since then it doesn't start-up unless a monitor was plugged in.
I've tried pinging it but it doesn't respond when no monitor is plugged in. meaning it's not even booting correctly.
I'd like to know what the problem is and how to fix it. And I'd really appreciate any help in diagnosing the problem. I just don't know where to start.
I installed wamp server and it doesn't start. port 80 test successfully,
View 1 Replies View RelatedI know this has been discussed many times, but with the current versions, things have changed again. So I ask again.
I am installed:
- Fedora 13, x64
I want to install, config and run:
- VMWare Server 2.0.2 (Community Edition)
I have already upgraded my Fedora 13 system using important commands:
- yum install kernel-headers kernel-devel
- yum install gcc
I have a directory:
/lib/modules/2.6.33.5-124.fc13.x86_64
with some subdirectories, but no include folder there.
vmware-config found the gcc, but cant find the kernel-header files. Also I dont know how to give it the correct path to these kernel-header files.
Since upgrading from Wheezy to Jessie I have not been able to start the MySQL-server. When I do a "systemctl start mysql" I get the following answer on the console:
Job for mysql.service failed. See 'systemctl status mysql.service' and 'journalctl -xn' for details.
Entering 'systemctl status mysql.service' the answer is:
● mysql.service - LSB: Start and stop the mysql database server daemon
Loaded: loaded (/etc/init.d/mysql)
Active: failed (Result: exit-code) since Don 2015-06-18 18:35:41 CEST; 4min 1s ago
Process: 11272 ExecStart=/etc/init.d/mysql start (code=exited, status=1/FAILURE)
syslog and hostname.err don't show any pertinent messages.
I need help adding a nohup command in this command line: su - rhx12 -c "/rhythx/rhythx/bin start /rhythx/rhyth" When I execute the script using root on the command line it works fine. But, when I reboot the server the process doesn't start. This script will go into the etc/init.d and rc2.d directory.
#!/bin/bash
case $i in
start)
su - rhx12 -c "/rhythx/rhythx/bin start /rhythx/rhythx"
;;
[Code]...
I want to install debian on vmware workstation 7.1.4 but there's a problem! when I try to install vmware tools or open-vm, it can't complete compile modules of vmware. It is a big problem... It seem problem of kernel version after 2.6.37... But I can't find solution. logs.... Before you can compile modules, you need to have the following installed...
[Code].....
I just did "do-release-upgrade" from ubuntu 9.10 > 10.04 > 10.10 > 11.04 which successful but after a restart, no login console just a blinking underscore. However I still able to login to server using ssh. During the boot I saw this failure "Starting system V runlevel compatibility [fail]".
View 4 Replies View RelatedAfter upgrade to Ubuntu 10.04 I realized that Firefox doesn't start, it just shows "Firefox starting"on the taskbar for a second and then dissapear. New Gwibber software doesn't start either.I have separate /home partion and installed new version to the system partition marked it to be formatted first. Opera browser works perfectly fine.
View 1 Replies View RelatedI have just bought two SSD, Intel X25-M 80GB, to install Ubuntu 10.04 64-bit server with vmware on a computer with 8GB RAM. I have tried to find out how to set up the system, but is somewhat confused on the setup. The idea is to use software raid to aviod data loss if one SSD is giving up in the future. When installing I have thought about using tree partitions.Swap Root Vmware vhd When reading about how to optimize vwware I found this:
Quote: Disks, Disks, Disks: I always attempt to put my guest OSs on their own partition and I format that partition thusly because VMWare server reads guests in huge blocks (/dev/sdb1 is the partition my guests reside on): mke2fs -b 4096 -R stride=8 /dev/sdb1
Then I set the block readahead value to somewhere around 16384, but you can go as high as twice that value (in my case this is an entire disk array, so I dropped the partition indicator): blockdev �setra 16384 /dev/sdb
How should I setup the file system on each partition? When using an SSD, each partition should be aligned. How do I do that? Let say I would like to have 4GB swap, 60GB root and the rest for vmware. At last, I have fount out that full support for TRIM is supported by kernel v2.6.33. Ubuntu 10.04 is using v2.6.32? If so, for full TRIM support I must upgrade kernel to v2.6.33.