Hardware :: HP 30" Monitor Not Showing Video Display On RHEL 5.3?
Jan 29, 2010
I have RHEL 5.3 running on Cray CX1. I am trying to connect to HP LP3065 30" monitor and not getting any video display (no response at all). Monitor is working fine on Windows system. Monitor has only DVI-D ports and my Cray system also has DVI socket to connect with. I checked for drivers at HP site and I couldn't find one anywhere else. I have NVIDIA quadro FX4800 video card and NVIDIA driver installed.
View 8 Replies
ADVERTISEMENT
Aug 14, 2010
I am using linux from last three month.
View 1 Replies
View Related
Feb 24, 2010
I have recently installed ubuntu using wubi on a dimension 9100 PC.When i boot up ubuntu I get a message that it cannot display current video mode when the GUI tries to launch. The monitor is a Dell E173FPb.From digging about on google it seems I need to edit the xorg.conf file? However, it doesn't exist in the /etc/X11 directory. Does wubi not create this file?
I then created a template of this xorg.conf with the "sudo X -configure" command. I then copied the created file to /etc/X11/xorg.conf and editied the Monitor settings. however, I still get the same error even when I put in the HorizSync and VerRefresh settings shown on the Dell webpage (31-80 and 56-76 respectively).
View 1 Replies
View Related
Apr 20, 2010
I am now using Ubuntu 9.10. The prob is I am not able to increase the resolution of display. It is showing only 800 x 600 display. While trying to increase the resolution it is showing "Unknown Monitor". So, how can I detect the monitor so I can increase the resolution of my system.
View 3 Replies
View Related
Oct 16, 2009
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
View 5 Replies
View Related
Apr 3, 2010
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 1 Replies
View Related
Jul 29, 2010
I have 4 virtual disk on AX4-5i. RHEL for some reason shows 16 partitions in /proc/partitions. I got lot-lot of IO errors in dmesg. Some of those 16 partitions "work", others just give (on using fdisk for example): Unable to read /dev/sdb. On EMC I have 4 ports, so it might be somehow releated to this.
[root@db ~]# /etc/init.d/iscsi restart
Logging out of session [sid: 1, target: iqn.1992-04.com.emc:cx.sl7e2101800014.a0, portal: 192.168.10.101,3260]
Logging out of session [sid: 2, target: iqn.1992-04.com.emc:cx.sl7e2101800014.b0, portal: 192.168.10.103,3260]
Logging out of session [sid: 3, target: iqn.1992-04.com.emc:cx.sl7e2101800014.a1, portal: 192.168.10.102,3260]
Logging out of session [sid: 4, target: iqn.1992-04.com.emc:cx.sl7e2101800014.b1, portal: 192.168.10.104,3260]
Logout of [sid: 1, target: iqn.1992-04.com.emc:cx.sl7e2101800014.a0, portal: 192.168.10.101,3260]: successful
Logout of [sid: 2, target: iqn.1992-04.com.emc:cx.sl7e2101800014.b0, portal: 192.168.10.103,3260]: successful
Logout of [sid: 3, target: iqn.1992-04.com.emc:cx.sl7e2101800014.a1, portal: 192.168.10.102,3260]: successful
Logout of [sid: 4, target: iqn.1992-04.com.emc:cx.sl7e2101800014.b1, portal: 192.168.10.104,3260]: successful
Stopping iSCSI daemon:
iscsid dead but pid file exists [OK]
Starting iSCSI daemon: [OK]
[OK]
Setting up iSCSI targets: Logging in to [iface: default, target: iqn.1992-04.com.emc:cx.sl7e2101800014.a0, portal: 192.168.10.101,3260]
Logging in to [iface: default, target: iqn.1992-04.com.emc:cx.sl7e2101800014.b0, portal: 192.168.10.103,3260]
Logging in to [iface: default, target: iqn.1992-04.com.emc:cx.sl7e2101800014.a1, portal: 192.168.10.102,3260]
Logging in to [iface: default, target: iqn.1992-04.com.emc:cx.sl7e2101800014.b1, portal: 192.168.10.104,3260]
Login to [iface: default, target: iqn.1992-04.com.emc:cx.sl7e2101800014.a0, portal: 192.168.10.101,3260]: successful
Login to [iface: default, target: iqn.1992-04.com.emc:cx.sl7e2101800014.b0, portal: 192.168.10.103,3260]: successful
Login to [iface: default, target: iqn.1992-04.com.emc:cx.sl7e2101800014.a1, portal: 192.168.10.102,3260]: successful
Login to [iface: default, target: iqn.1992-04.com.emc:cx.sl7e2101800014.b1, portal: 192.168.10.104,3260]: successful
[OK]
[root@db ~]#
I've googled and read docs but got no idea what to do. Any experiences with EMC/RHEL/iSCSI - I just don't understand where those 16 (and half of them not working/giving lotof errors) come from? For example Citrix Xen on similar network conf can see/use same EMC thoughr iSCSI nicely. SO there should'nt be network/auth issues (not using CHAP btw). I got feeling that problem is on RHEL iscsi conf side.
View 3 Replies
View Related
Feb 7, 2011
Phenom 9500+ quad core, 3GB RAM, Nvidia 8800GT: 260.19.36 driver.Installed the latest Boxee for Linux. Got my remote setup. Everything works except when I open a video it opens in a tiny box in the upper left hand corner of my monitor.Is there any way to get Boxee videos to play full-screen?
View 6 Replies
View Related
Aug 10, 2011
One monitor is working fine but the display is not coming on other monitor. I guess no problem in monitor because I swapped the cable to check the individual monitor. When I try to install the new driver its giving GCC-VERSION-CHECK while installing. And I do not think I have to install the new driver because it has already one. What should I do to configure the dual monitor. Do I have to edit any configuration file.
My system configuration details are below.
Redhat version : Redhat Enterprise Linux WS release 3 (Taroon update 4)
Driver in SRBC 26: NVIDIA-LINUX-x86_64-1.0-7664-pkg2.run
Nvidia card model : Quadro fx p171
Bios version of Nvidia : 4.35.20.23.07
p/n : 900-50171-0400-0000K
600-50171-0002-201J
View 3 Replies
View Related
Jan 18, 2011
I am trying to install RHEL 6 on a machine without a monitor. After reading through their installation guide I have decided to try a vnc installation using my laptop. The guide says: To activate the VNC connect mode, pass the vncconnect boot parameter:
boot: linux vncconnect=HOST
The problem is that I have never had to do this before, I have no idea what "pass a boot parameter" means.
View 4 Replies
View Related
Jul 3, 2009
I was trying to take advantage of that new HTML5 <video> tag, and Firefox 3.5's native Ogg support, by embedding an .ogv video. Here is the references I used:
[code].....
Here was the code I put on my web page:
Code:
<video width="640" height="480" controls="controls">
<source src="http://path/to/uploaded/video/on/my/site.ogv" />
Your browser does not support the <code>video</code> element.
</video>
However, when I view it I get a video box, but it is grey and will not play a video. I keep playing with the various attributes but the result always seems to be the same. I also tried it on a Windows box with Firefox 3.5 (to make sure it didn't have something to do with my Linux config) but the results were the same.
View 4 Replies
View Related
Oct 5, 2010
I am trying to install RHEL 5.5 using rhel-server-5.5-i386-dvd DVD on my DELL Inspiron 1464 Laptop. However, after probing the hardware, I see a message at the bottom of the screen regarding xwindow, (cannot read it as it disappears fast) and then the first page of installation loads.(this has a redhat logo and a forward button at lower right corner) BUT this page is extremely DIM. Its as good as its not there.I have
DISPLAY:Intel(R) Graphics Media Accelerator HD (Core 3i) Intel Corporatoin Compatible
PROC: Intel (R) Core(TM) i3 M330 @ 2.13Ghz
RAM: 4.00 GB
What should I do to fix the issue? Also, earlier I was able to install Fedora 13 (32bit) successfully (dual boot with Win 7 Pro 64bit).
View 5 Replies
View Related
Oct 1, 2010
It seems that whenever I boot my laptop (hp probook 6450b) without a monitor attached, then boot with a monitor later attached, the configuration gets all messed up.
Currently, if I boot with the monitor attached, right after the blue loading screen (at the login prompt) i get two black monitors and a mouse, with no login screen. Unplugging the monitor shows the login screen on the laptop.
If i boot without the monitor attached, log in, then plug it in, i see the following from xrandr:
Code:
Screen 0: minimum 320 x 200, current 2390 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 310mm x 174mm
1366x768 59.6*+
1024x768 60.0
[Code]....
However, now when I reboot, all settings are lost, and if the monitor is attached, i get the black screen with a mouse at login.
I did notice that when I shutdown, it hangs on "Running guests on default URI", and i get a stack trace. It will keep dumping stack traces, and i have to hold down the power button to force it off.
View 2 Replies
View Related
Mar 23, 2011
I just installed Kubuntu 10.04. My monitor support up to 1680x1050 resolution but Kubuntu allows me to only choose up to 1360x768. How can I fix this?
View 1 Replies
View Related
Jun 7, 2011
How to monitor hardware temperature (CPU , Motherboard , HDD etc) in CentOS/RHEL ?
View 3 Replies
View Related
Jul 30, 2015
I've recently installed Debian v8.1 and installed Nvidia driver 340.46. In nvidia-settings I am able to enable my second monitor and enable it/set it's position..etc. My second monitor is not being detected in Debian Display and is 'on' but only showing a black screen. I've tried researching and implementing various 'fixes', but I'm not having any luck.
I'm running dual GTX 570's with a monitor plugged into one each (DVI). I noticed in my xorg.conf under Section "Screen" I have an option "MultiGPU" "Off"; would this be part of the issue?
I've tried:
- purging all nvidia drivers and re-installing
- installing different versions of nvidia drivers
- add nomodeset in grub
View 2 Replies
View Related
Mar 28, 2011
one of them is a TV with an HDMI input. The login screen shows up on the tv, so if someone is watching a movie, I have to pause it to switch inputs and login. Other than that, everything is fine. How do I get the login screen to show up on the main monitor?
View 1 Replies
View Related
Feb 23, 2010
I'm sure this is a very simple task but I don't have a lot of experience with Linux. I need to view what my display adapters settings are, specifically the refresh rate. I have found plenty on how to change the settings but not how show its current setup. I am troubleshooting an vga splitter/extender issue on a digital signage unit where the master screen syncs up but the remote screen does not, I think it has to do with H-Sync V-Sync or refresh rate.
View 3 Replies
View Related
May 21, 2011
i have a hp laptop with a cracked screen so i'm using and external monitor. It is an HP vs15c. Now it was working fine.. perfect even.. until i was working on a second virus infect pc in bed with the keyboard connection to this pc next to me. What happened next is a bit embarrassing and also why i have no idea what i did or how to fix it. Well i found the virus in the laptop i was repairing (god i hate vista.) when i wiggled in excitement .. only the keyboard slide under my breast and the next thing i know my screen looks stretched and i have no bars. i can move my mouse beyond the right and the bottom edges of the screen and i can't change anything cause i can't get any option.. or least i don't know how to get them without the bars.. i can't even reboot if i wanted to cause my task bar is GONE. the bottom active bar is there.. off screen where i can see it but if i drag my mouse down far enough it is there to click on things. However the top bar that i need is gone. I am NOT good with terminal.. nor do i know how to open it without the top task bar. Right now i'm cursing a storm and being very angry about being a woman.
View 14 Replies
View Related
Jun 9, 2011
I've checked gdmsetup and there isn't anything that I can see that keeps my general users from getting in remotely. I can get the Gnome to login as root but not as a user. SSH from PuTTY works fine for all users. The error I get actually says that the username or password is incorrect - checked using SSH and it is fine.
View 1 Replies
View Related
Feb 10, 2010
I am RHEL 5. I just installed it and when i try to config display it how only two resolution by default 640x480,800x600.No other resolution option is shown. I tried by editing xorg.conf but of no use.
View 2 Replies
View Related
Mar 31, 2011
My network monitor seems to have disappeared from the taskbar.I tried right clicking and "Add Pannel" however I do not see "Network Monitor" in the list.I tried running Code:nm-applet --sm-disableBut this gave me the errorI figure this because it's already running so I tried to killall and try it againThis time I getCode:** Message: applet now removed from the notification area** Message: applet now embedded in the notification area** (nm-apoplet:4498): old state indicates that this was not a disconnect 0I see a 1-2 pixel sliver of something appear briefly in my taskbar and then it disappears, I assume this was the n ntly installed tshark (curses-based version of wireshark)
View 1 Replies
View Related
Nov 30, 2010
I have OpenSuse 11.3, with KDE4. a few days ago, after an upgrade, are presenting several flaws in the system configuration.
But I think the cause of all is that at startup, before showing up loginscreen display the message box
Quote:
Could not update ICEauthority file / var / lib / gdm / .ICEautority.
I gave CRTR Alt F1 to switch to text mode, and consult the file in that directory to verify the existence of the file and its permissions:
Quote:
I've checked some forums, but apparently they relate to other scenarios that describe the solution does not work
View 2 Replies
View Related
Apr 11, 2010
the system was off and now it won't boot up. It have power because the monitor is showing the orange light as if the tower is off. I'm assuming it may be the PSU went dead. Well, today, I've changed the PSU which should be a good working one and still no power to the tower system. I dont overclock. As far as I can tell the fan is not spinning since this has happen. This is an Intel C2D, Biostar motherboard, 320gb WD HD & 2gb memory.
View 3 Replies
View Related
Jul 9, 2011
How to install Mplayer package on my Linux red hat 5.4 as I am using VMware on win7
View 10 Replies
View Related
Aug 10, 2010
I successfully installed linux mint 9 and at the same time update the system. Now that everything is running, I returned the pc to the owner, but when I power it on, no display. You can see the post but no display after that. And 1 more, I press the shift while loading grub2, nope nothing happens. And also tried booting the CD installer, same results.
I installed the system using an old 15" CRT monitor and the owner had a AOC 1619sw LCD monitor. I found this thread from ubuntu which I think was the same problem as mine, [ubuntu] Help! No display/keyboard on boot with differnet monitor - Ubuntu Forums, but no solutions yet.
View 4 Replies
View Related
Jan 10, 2010
Can Ubuntu display to a sepporat monitor? If so what do I need to do?
View 4 Replies
View Related
Jul 7, 2010
I'm having some strange problems with my monitor. It's an LG Flatron L1730S and the graphics card is a Nvidia Geforce 5600FX. The monitor is listed as unknown in monitor settings and is going at 51 HZ with performance and out of range issues in some game. How can I get ubuntu to recognise it, or better yet change the driver?I did some googling and discovered a tool called displayconfig-gtk, but I can't install it in Ubuntu 10.04
View 4 Replies
View Related
May 10, 2010
I've recently hooked up my pc to my very old TV-set and I've managed to get TV-out (S-video) working fairly quickly.BUT, I'm having a weird issue. The picture on the TV-set is distorted with 'white-lines' running through it horizontally.Its difficult to describe, but it looks a little like a sheet of writing-paper splashed across the screen... I've searched around and haven't found a solution yet. The weird thing is, that running windows, I get no such display corruption.I'm using the very latest xf-video-ati driver atop a r300 (radeon 9600) card. The TV is a very old model, PAL standard.Output from xrandr:
Code:
Screen 0: minimum 320 x 200, current 1280 x 960, maximum 4096 x 4096
VGA-0 connected 1280x960+0+0 (normal left inverted right x axis y axis) 355mm x 266mm
[code]....
View 10 Replies
View Related
Aug 12, 2011
I recently installed Debian. I have a monitor plug in to my laptop and i cant get my monitor to display its native resolution.
View 4 Replies
View Related
