Programming :: How To Get Grep Output 0 - 1 And Test It
Apr 7, 2009
I am trying to use a shell script to find a string in a file and do something when found. code...
What should happen is pppd will start in a different process and stream it's output to pppdout. pppdout should be created in the current folder. Then the script should periodically check the pppdout file for the string Script (which eventually will appear, some seconds later) and when found exit the script. Ultimately the script will do something useful when the text is found. However, the output from the program is a repeating: 'scriptname.sh: 12: FOUND: not found'
Where scriptname.sh would be the name of your script and 12 refers to the line with 'done'.
Why does grep not find the text, or at least why deos my script not check the grep output correctly?
View 10 Replies
ADVERTISEMENT
Apr 14, 2010
How can I remove characters from grep output using sed? code...
View 9 Replies
View Related
Jul 28, 2010
I have two files :
FileA
prot1
prot5
prot9
prot15
[Code]....
What I need to do is to extract from fileB the fields containing only the strings in fileA.
I thought awk could do the job easily with :
Code:
awk 'BEGIN { RS = "###" } /'$variable'/' fileB > output
where variable would maybe be the output of grep from fileA. So can I store the output of grep in a variable to use it afterwards with awk ?
something like that:
Code:
result=`grep prot. fileA` ; awk 'BEGIN { RS = "###" } /'$result'/' fileB > output
but that doesn't work. I'm always getting the entire fileB.
The output of grep get stored in the variable, I verified that with echo. So there is something that I just don't get... It seems to me that the above line should work.
View 11 Replies
View Related
May 1, 2011
My script.
This is may script:
Code:
Problem: Output file doest not exclude the values in grep -av
View 3 Replies
View Related
Nov 22, 2010
I need to kind of grep within grep. My input file would be something like:
[Code]....
and I need to find the first occurrence of hello before MY PATTERN (hello 9008 in this case), so the output should be:
[Code]....
View 4 Replies
View Related
May 17, 2010
I forgot a lot of my command line. I am doing cat file | grep "error" and i would like it to show everything to the right of G:/ including G:/ if possible. I figure its an awk command but i dont know what. I tried awk '{print $8+}' but + does not work like i hoped and guessed.
View 2 Replies
View Related
Mar 6, 2011
Following is my ifconfig output code...
I want to do some thing grep that I see the IP corresponding to each LAN card?
Is that possible?
View 8 Replies
View Related
Feb 15, 2011
I have a requirement to find the files having its name as ack_reply. However, there are many other files in the same directory as these resides. Now I have to remove these files from the folder and retain others after 7 days. So I tried to write the below script with grep command.
find $directory -type f -mtime +7 | grep ack_reply
how can I pass this output to -exec command.
If I am not using grep command my script would be as
find $directory -type f -mtime +7 -exec remove.sh {}\;;
How can I use -exec with grep and find.
View 4 Replies
View Related
Feb 5, 2010
I'm trying to grep the output of ngrep. Unfortunately when I add another grep to the pipeline, I get no output at all. It can be some other command too - cat / grep / tee - everything breaks the chain. Example:
[Code]....
If I use cat somefile instead of ngrep at the start, everything works as expected.
View 2 Replies
View Related
Aug 13, 2010
Is there some way to filter output of command by OR condition in Linux? There is filtering by AND condition with grep in way like:
ls -l | grep "^a" | grep "z$"
That says: list all files that beggins with "a" AND ends with "z" (so there is shorter way to write this: grep "^a.*z$", but it is not matter). Is there some way to perform test by OR condition? For example: files that starts exactly with "xen" OR files that ends exactly with ".rpm". But exactly, not something like:
grep "[xen]{0,3}.*[.rpm]{0,4}"
View 2 Replies
View Related
Aug 24, 2010
how I cat to filter out information about Unix Domain Sockets from netstat output without grep? Is there some option for command (I not found it in man of netstat).
View 2 Replies
View Related
Feb 21, 2010
In linux, I can grep a string from a file using grep mySearchString myFile.txt.
How can I only get the result which are unique?
View 1 Replies
View Related
Sep 1, 2010
So theres this command
Code:
man -k mail
Which lists commands that contain the keyword "mail" in their description.I want the output of this command in less and the words highlighted by grep. Something like
Code:
man -k mail | grep mail | less
The command doesn't work, how do I fix it?
View 2 Replies
View Related
Feb 3, 2010
I would like to grep two numbers out of a text file, and divide them.
Here is the script code...
It feels like grep saves a new line too? or what is happening? i simply can't divide them, as it handles the variables as they are empty (and prints the two numbers although they were not printed
View 6 Replies
View Related
Nov 11, 2010
I want to pipe the output of a command into grep as the search TERM, rather than the text to be searched, like this for example
Code:
cat /var/log/auth.log | grep date "&b &d"
so that I only see the lines in auth.log for the current day...but obviously that line doesn't work.... is there a way to do this with grep, or even another command?
View 4 Replies
View Related
Jul 13, 2011
I am not sure why this does not work..
tshark |grep 'string'
Gives me what I want but
tshark |grep 'string' >/tmp/outputfile
Gives me an empty file.
View 3 Replies
View Related
Mar 22, 2010
I have some big files of logs that contain errors printed by an app. They are most of the time relevant, however most of them are similar. So i figured i could check what happened between a time interval with a find.
Im using this one
Code:
And I get an output similar to this one.
Code:
Is there a way to condensate the output lines to get only one or two, indicating the start and last occurrence of a block? Or I need to create a program to do so?
Because right now I get thousands of similar lines, but when I'm scrolling through them i sometimes miss relevant information that i would've otherwise noted if it wasn't all that spammy.
View 10 Replies
View Related
Jan 20, 2011
I need to test network card throughput and speed between two computers, one is running Fedora and other running Windows 7. Usually I would use netperf to perform this task, however I can't find Windows build of netperf. Can anyone recommend any network evaluation tool, similar to netperf (clien/server) which has both Windows and Linux versions.
View 2 Replies
View Related
Aug 23, 2010
I am trying to monitor how long an ldap search takes and maybe notify or something that a search takes longer than say 10 seconds.
Code:
tail -n 1000 /var/log/ldap.log
for SRCH in $( cat monitorldap.log |grep 'SRCH'); do
echo search string is
echo $SRCH
[Code]....
ok, so to start off with it doesn't appear to get the whole line, just a piece "Aug". How can I get the whole line into a variable so I can then cut it up into the pieces I need?
View 4 Replies
View Related
Dec 28, 2010
I'm using Zabbix on which I can use give bash command to the agent.This 1-liner will give me all the interfaces with their IPv4 addresses.I have a 2nd expression which returns a checksum so I can detect a difference whenever someone deletes/adds/changes an ipv4 interface.This is the output on my Ubuntu-server:
Code:
~# ifconfig | grep -B1 ' inet ' | grep -oE '(^[a-z0-9:]*|addr:[0-9]+.[0-9]+.[0-9]+.[0-9]+)'
eth0
[code]....
View 8 Replies
View Related
Oct 5, 2010
How can i use grep (or any other command) to check for lines that begin with N number.
E.g. I want to print out commands (from history), but only from the command number 50 until #200.
This one doesn't work:
Code:
history | grep "^[50-200]"
Should print out something like:
Code:
50 cd ~/Desktop
[Code].....
View 4 Replies
View Related
Aug 6, 2010
1) I need to search a field value to check for exact 0. If the number is 0, it should throw error.
The line to be searched looks like as below. "Output Rows [1], Affected Rows [1], Applied Rows [1], Rejected Rows [0]"
Here I have to search whether the affected rows is 0. But the code below picks up other values also (lie 10, 20.. etc). How do we write to get an exact match for 0? Code: affected=`echo ${line} | cut -f6 -d" " `
affectedcount='echo ${affected} |grep 0 ` 2) Also, I need to check whether the rejected rows > 0
Code: rejected=`echo ${line} | cut -f12 -d" " `
rejectedcount='echo {rejected} |grep [1-9]`
3)Can we combine these two statements in a better way to get the desired results?
View 2 Replies
View Related
Mar 15, 2011
I have a file:
979798707
787862348
766428634
I want to see if all the records in the file are present in the contents of the files of a particular directory.
Basically I want to say if grep doesn't return anything, then report.
For example in /tmp dir I have 4 files and flast 2 values (787862348 and 766428634) are present in the files of /tmp dir, but first one (979798707) is not. I want to echo that in a reporting file.
something like:
while read line
do
# if ! grep -rl $line /tmp
echo $line >> are_not_present
done < "myFile"
How do I achieve " if ! grep -rl $line /tmp"? That is, if the line is found by grep, then grep will print the output, but if grep does'nt find it, it will print nothing. How can I check if grep didn't find it (i.e. printed nothing)?
View 2 Replies
View Related
Mar 23, 2011
Can you find an alternative for Code: wc -l using grep?
View 1 Replies
View Related
Jun 1, 2011
I'm just starting out with bash scripting (yesterday, really). I want to add a file to each user's home directory, pretty simple really, and send it out via our Apple Remote Desktop system to our Macs. Here is my script: Code: #!/bin/bash
for i in $(ls -d /Users/*)
doif [ -e $i/.tcshrc ]
thenecho "$i/.tcshrc exists!"elseecho "$i/.tcshrc does not exist"
[code]....
View 6 Replies
View Related
Dec 3, 2010
i have a sample that looks like this:
Code:
[schneidz@hyper temp]$ wget -q --output-document=- http://world.needforspeed.com/SpeedAPI/ws/game/nfs-w/leaderboards/events
[code]....
View 2 Replies
View Related
Feb 9, 2010
I am using Sun 5.9.
I am putting the value "Feb 10" in variable 'c' here.
Code:
-bash-3.00$ c=`date | awk '{print $2 " " $3}'`
-bash-3.00$ echo $c
Feb 10
But when I am grep-ing value of 'c', I am getting this error.
Code:
-bash-3.00$ ls -lrth | grep $c
grep: can't open 10
This is because there is a space between "Feb" and "10".
View 5 Replies
View Related
Dec 30, 2010
I want grep multiple files:
let abc.1.abc.2,abc.3,abc.4
I use grep <pattern> abc.* to read the files. But here grep read files in the order of 1,2,3,4 . I want to to grep the files in reverse order like 1st the abc.4 file will be read and abc.1 file will be last.
Is this possible ?
View 3 Replies
View Related
Aug 10, 2010
I am interested in using the grep method in the shell of my CentOS machine to obtain patterns from a file and use them to search through another file and highlight the patterns found. For example:
pattern file:
one
two
three
test file:
AAAAAAAAAAAAAAAAAAAAAoneAAAAAAAAAAAAAAAAthreeAAAAAAAAAAAA
View 8 Replies
View Related
Apr 26, 2010
Would like to know how to cat the below output.
Code:
grep userlist_file /etc/vsftpd/vsftpd.conf | cut -c15-
Below which is the output for above command.
[code]...
View 6 Replies
View Related
